[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / ata / pata_cypress.c

/*
 * pata_cypress.c 	- Cypress PATA for new ATA layer
 *			  (C) 2006 Red Hat Inc
 *			  Alan Cox <alan@redhat.com>
 *
 * Based heavily on
 * linux/drivers/ide/pci/cy82c693.c		Version 0.40	Sep. 10, 2002
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>

#define DRV_NAME "pata_cypress"
#define DRV_VERSION "0.1.2"

/* here are the offset definitions for the registers */

enum {
	CY82_IDE_CMDREG		= 0x04,
	CY82_IDE_ADDRSETUP	= 0x48,
	CY82_IDE_MASTER_IOR	= 0x4C,
	CY82_IDE_MASTER_IOW	= 0x4D,
	CY82_IDE_SLAVE_IOR	= 0x4E,
	CY82_IDE_SLAVE_IOW	= 0x4F,
	CY82_IDE_MASTER_8BIT	= 0x50,
	CY82_IDE_SLAVE_8BIT	= 0x51,

	CY82_INDEX_PORT		= 0x22,
	CY82_DATA_PORT		= 0x23,

	CY82_INDEX_CTRLREG1	= 0x01,
	CY82_INDEX_CHANNEL0	= 0x30,
	CY82_INDEX_CHANNEL1	= 0x31,
	CY82_INDEX_TIMEOUT	= 0x32
};

static int cy82c693_pre_reset(struct ata_port *ap)
{
	ap->cbl = ATA_CBL_PATA40;
	return ata_std_prereset(ap);
}

static void cy82c693_error_handler(struct ata_port *ap)
{
	ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}

/**
 *	cy82c693_set_piomode	-	set initial PIO mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called to do the PIO mode setup.
 */

static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	struct ata_timing t;
	const unsigned long T = 1000000 / 33;
	short time_16, time_8;
	u32 addr;

	if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) {
		printk(KERN_ERR DRV_NAME ": mome computation failed.\n");
		return;
	}

	time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
	time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);

	if (adev->devno == 0) {
		pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);

		addr &= ~0x0F;	/* Mask bits */
		addr |= FIT(t.setup, 0, 15);

		pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
		pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
		pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16);
		pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8);
	} else {
		pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);

		addr &= ~0xF0;	/* Mask bits */
		addr |= (FIT(t.setup, 0, 15) << 4);

		pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
		pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
		pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16);
		pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8);
	}
}

/**
 *	cy82c693_set_dmamode	-	set initial DMA mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called to do the DMA mode setup.
 */

static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
	int reg = CY82_INDEX_CHANNEL0 + ap->port_no;

	/* Be afraid, be very afraid. Magic registers  in low I/O space */
	outb(reg, 0x22);
	outb(adev->dma_mode - XFER_MW_DMA_0, 0x23);

	/* 0x50 gives the best behaviour on the Alpha's using this chip */
	outb(CY82_INDEX_TIMEOUT, 0x22);
	outb(0x50, 0x23);
}

static struct scsi_host_template cy82c693_sht = {
	.module			= THIS_MODULE,
	.name			= DRV_NAME,
	.ioctl			= ata_scsi_ioctl,
	.queuecommand		= ata_scsi_queuecmd,
	.can_queue		= ATA_DEF_QUEUE,
	.this_id		= ATA_SHT_THIS_ID,
	.sg_tablesize		= LIBATA_MAX_PRD,
	.max_sectors		= ATA_MAX_SECTORS,
	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
	.emulated		= ATA_SHT_EMULATED,
	.use_clustering		= ATA_SHT_USE_CLUSTERING,
	.proc_name		= DRV_NAME,
	.dma_boundary		= ATA_DMA_BOUNDARY,
	.slave_configure	= ata_scsi_slave_config,
	.bios_param		= ata_std_bios_param,
};

static struct ata_port_operations cy82c693_port_ops = {
	.port_disable	= ata_port_disable,
	.set_piomode	= cy82c693_set_piomode,
	.set_dmamode	= cy82c693_set_dmamode,
	.mode_filter	= ata_pci_default_filter,

	.tf_load	= ata_tf_load,
	.tf_read	= ata_tf_read,
	.check_status 	= ata_check_status,
	.exec_command	= ata_exec_command,
	.dev_select 	= ata_std_dev_select,

	.freeze		= ata_bmdma_freeze,
	.thaw		= ata_bmdma_thaw,
	.error_handler	= cy82c693_error_handler,
	.post_internal_cmd = ata_bmdma_post_internal_cmd,

	.bmdma_setup 	= ata_bmdma_setup,
	.bmdma_start 	= ata_bmdma_start,
	.bmdma_stop	= ata_bmdma_stop,
	.bmdma_status 	= ata_bmdma_status,

	.qc_prep 	= ata_qc_prep,
	.qc_issue	= ata_qc_issue_prot,

	.data_xfer	= ata_pio_data_xfer,

	.irq_handler	= ata_interrupt,
	.irq_clear	= ata_bmdma_irq_clear,

	.port_start	= ata_port_start,
	.port_stop	= ata_port_stop,
	.host_stop	= ata_host_stop
};

static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
	static struct ata_port_info info = {
		.sht = &cy82c693_sht,
		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
		.pio_mask = 0x1f,
		.mwdma_mask = 0x07,
		.port_ops = &cy82c693_port_ops
	};
	static struct ata_port_info *port_info[1] = { &info };

	/* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the
	   moment we don't handle the secondary. FIXME */

	if (PCI_FUNC(pdev->devfn) != 1)
		return -ENODEV;

	return ata_pci_init_one(pdev, port_info, 1);
}

static struct pci_device_id cy82c693[] = {
	{ PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
	{ 0, },
};

static struct pci_driver cy82c693_pci_driver = {
        .name 		= DRV_NAME,
	.id_table	= cy82c693,
	.probe 		= cy82c693_init_one,
	.remove		= ata_pci_remove_one
};

static int __init cy82c693_init(void)
{
	return pci_register_driver(&cy82c693_pci_driver);
}


static void __exit cy82c693_exit(void)
{
	pci_unregister_driver(&cy82c693_pci_driver);
}


MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cy82c693);
MODULE_VERSION(DRV_VERSION);

module_init(cy82c693_init);
module_exit(cy82c693_exit);
Commit	Line	Data
669a5db4 JG	1	/*
	2	* pata_cypress.c - Cypress PATA for new ATA layer
	3	* (C) 2006 Red Hat Inc
	4	* Alan Cox <alan@redhat.com>
	5	*
	6	* Based heavily on
	7	* linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002
	8	*
	9	*/
85cd7251	10
669a5db4 JG	11	#include <linux/kernel.h>
	12	#include <linux/module.h>
	13	#include <linux/pci.h>
	14	#include <linux/init.h>
	15	#include <linux/blkdev.h>
	16	#include <linux/delay.h>
	17	#include <scsi/scsi_host.h>
	18	#include <linux/libata.h>
	19
	20	#define DRV_NAME "pata_cypress"
	21	#define DRV_VERSION "0.1.2"
	22
	23	/* here are the offset definitions for the registers */
	24
	25	enum {
	26	CY82_IDE_CMDREG = 0x04,
	27	CY82_IDE_ADDRSETUP = 0x48,
	28	CY82_IDE_MASTER_IOR = 0x4C,
	29	CY82_IDE_MASTER_IOW = 0x4D,
	30	CY82_IDE_SLAVE_IOR = 0x4E,
	31	CY82_IDE_SLAVE_IOW = 0x4F,
	32	CY82_IDE_MASTER_8BIT = 0x50,
	33	CY82_IDE_SLAVE_8BIT = 0x51,
	34
	35	CY82_INDEX_PORT = 0x22,
	36	CY82_DATA_PORT = 0x23,
	37
	38	CY82_INDEX_CTRLREG1 = 0x01,
	39	CY82_INDEX_CHANNEL0 = 0x30,
	40	CY82_INDEX_CHANNEL1 = 0x31,
	41	CY82_INDEX_TIMEOUT = 0x32
	42	};
	43
	44	static int cy82c693_pre_reset(struct ata_port *ap)
	45	{
	46	ap->cbl = ATA_CBL_PATA40;
	47	return ata_std_prereset(ap);
	48	}
	49
	50	static void cy82c693_error_handler(struct ata_port *ap)
	51	{
	52	ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
	53	}
	54
	55	/**
	56	* cy82c693_set_piomode - set initial PIO mode data
	57	* @ap: ATA interface
	58	* @adev: ATA device
	59	*
	60	* Called to do the PIO mode setup.
	61	*/
85cd7251	62
669a5db4 JG	63	static void cy82c693_set_piomode(struct ata_port ap, struct ata_device adev)
	64	{
	65	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	66	struct ata_timing t;
	67	const unsigned long T = 1000000 / 33;
	68	short time_16, time_8;
	69	u32 addr;
85cd7251	70
669a5db4 JG	71	if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) {
	72	printk(KERN_ERR DRV_NAME ": mome computation failed.\n");
	73	return;
	74	}
	75
	76	time_16 = FIT(t.recover, 0, 15) \| (FIT(t.active, 0, 15) << 4);
	77	time_8 = FIT(t.act8b, 0, 15) \| (FIT(t.rec8b, 0, 15) << 4);
85cd7251	78
669a5db4 JG	79	if (adev->devno == 0) {
669a5db4 JG	80	pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
85cd7251	81
669a5db4 JG	82	addr &= ~0x0F; /* Mask bits */
669a5db4 JG	83	addr \|= FIT(t.setup, 0, 15);
85cd7251	84
669a5db4 JG	85	pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
	86	pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
	87	pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16);
	88	pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8);
	89	} else {
	90	pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
85cd7251	91
669a5db4 JG	92	addr &= ~0xF0; /* Mask bits */
	93	addr \|= (FIT(t.setup, 0, 15) << 4);
	94
	95	pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
	96	pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
	97	pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16);
	98	pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8);
	99	}
	100	}
	101
	102	/**
	103	* cy82c693_set_dmamode - set initial DMA mode data
	104	* @ap: ATA interface
	105	* @adev: ATA device
	106	*
	107	* Called to do the DMA mode setup.
	108	*/
85cd7251	109
669a5db4 JG	110	static void cy82c693_set_dmamode(struct ata_port ap, struct ata_device adev)
	111	{
	112	int reg = CY82_INDEX_CHANNEL0 + ap->port_no;
85cd7251	113
669a5db4 JG	114	/* Be afraid, be very afraid. Magic registers in low I/O space */
	115	outb(reg, 0x22);
	116	outb(adev->dma_mode - XFER_MW_DMA_0, 0x23);
85cd7251	117
669a5db4 JG	118	/* 0x50 gives the best behaviour on the Alpha's using this chip */
	119	outb(CY82_INDEX_TIMEOUT, 0x22);
	120	outb(0x50, 0x23);
	121	}
	122
	123	static struct scsi_host_template cy82c693_sht = {
	124	.module = THIS_MODULE,
	125	.name = DRV_NAME,
	126	.ioctl = ata_scsi_ioctl,
	127	.queuecommand = ata_scsi_queuecmd,
	128	.can_queue = ATA_DEF_QUEUE,
	129	.this_id = ATA_SHT_THIS_ID,
	130	.sg_tablesize = LIBATA_MAX_PRD,
	131	.max_sectors = ATA_MAX_SECTORS,
	132	.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
	133	.emulated = ATA_SHT_EMULATED,
	134	.use_clustering = ATA_SHT_USE_CLUSTERING,
	135	.proc_name = DRV_NAME,
	136	.dma_boundary = ATA_DMA_BOUNDARY,
	137	.slave_configure = ata_scsi_slave_config,
	138	.bios_param = ata_std_bios_param,
	139	};
	140
	141	static struct ata_port_operations cy82c693_port_ops = {
	142	.port_disable = ata_port_disable,
	143	.set_piomode = cy82c693_set_piomode,
	144	.set_dmamode = cy82c693_set_dmamode,
	145	.mode_filter = ata_pci_default_filter,
85cd7251	146
669a5db4 JG	147	.tf_load = ata_tf_load,
	148	.tf_read = ata_tf_read,
	149	.check_status = ata_check_status,
	150	.exec_command = ata_exec_command,
	151	.dev_select = ata_std_dev_select,
	152
	153	.freeze = ata_bmdma_freeze,
	154	.thaw = ata_bmdma_thaw,
	155	.error_handler = cy82c693_error_handler,
	156	.post_internal_cmd = ata_bmdma_post_internal_cmd,
	157
	158	.bmdma_setup = ata_bmdma_setup,
	159	.bmdma_start = ata_bmdma_start,
	160	.bmdma_stop = ata_bmdma_stop,
	161	.bmdma_status = ata_bmdma_status,
	162
	163	.qc_prep = ata_qc_prep,
	164	.qc_issue = ata_qc_issue_prot,
bda30288	165
669a5db4 JG	166	.data_xfer = ata_pio_data_xfer,
	167
	168	.irq_handler = ata_interrupt,
	169	.irq_clear = ata_bmdma_irq_clear,
85cd7251	170
669a5db4 JG	171	.port_start = ata_port_start,
	172	.port_stop = ata_port_stop,
	173	.host_stop = ata_host_stop
85cd7251	174	};
669a5db4 JG	175
	176	static int cy82c693_init_one(struct pci_dev pdev, const struct pci_device_id id)
	177	{
	178	static struct ata_port_info info = {
	179	.sht = &cy82c693_sht,
	180	.flags = ATA_FLAG_SLAVE_POSS \| ATA_FLAG_SRST,
	181	.pio_mask = 0x1f,
	182	.mwdma_mask = 0x07,
	183	.port_ops = &cy82c693_port_ops
	184	};
	185	static struct ata_port_info *port_info[1] = { &info };
85cd7251	186
669a5db4 JG	187	/* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the
669a5db4 JG	188	moment we don't handle the secondary. FIXME */
85cd7251	189
669a5db4 JG	190	if (PCI_FUNC(pdev->devfn) != 1)
669a5db4 JG	191	return -ENODEV;
85cd7251	192
669a5db4 JG	193	return ata_pci_init_one(pdev, port_info, 1);
	194	}
	195
	196	static struct pci_device_id cy82c693[] = {
	197	{ PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
	198	{ 0, },
	199	};
	200
	201	static struct pci_driver cy82c693_pci_driver = {
	202	.name = DRV_NAME,
	203	.id_table = cy82c693,
	204	.probe = cy82c693_init_one,
	205	.remove = ata_pci_remove_one
	206	};
	207
	208	static int __init cy82c693_init(void)
	209	{
	210	return pci_register_driver(&cy82c693_pci_driver);
	211	}
	212
	213
	214	static void __exit cy82c693_exit(void)
	215	{
	216	pci_unregister_driver(&cy82c693_pci_driver);
	217	}
	218
	219
	220	MODULE_AUTHOR("Alan Cox");
	221	MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller");
	222	MODULE_LICENSE("GPL");
	223	MODULE_DEVICE_TABLE(pci, cy82c693);
	224	MODULE_VERSION(DRV_VERSION);
	225
	226	module_init(cy82c693_init);
	227	module_exit(cy82c693_exit);