Commit | Line | Data |
---|---|---|
421b20b9 JG |
1 | # |
2 | # SATA/PATA driver configuration | |
3 | # | |
4 | ||
b196fc69 JE |
5 | menuconfig ATA |
6 | tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" | |
e25df120 | 7 | depends on HAS_IOMEM |
bf2d401b | 8 | depends on BLOCK |
9317fd4c | 9 | depends on !(M32R || M68K) || BROKEN |
81ce3c4b | 10 | select SCSI |
c6fd2807 JG |
11 | ---help--- |
12 | If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or | |
13 | any other ATA device under Linux, say Y and make sure that you know | |
14 | the name of your ATA host adapter (the card inside your computer | |
15 | that "speaks" the ATA protocol, also called ATA controller), | |
16 | because you will be asked for it. | |
17 | ||
abcdceb9 RD |
18 | NOTE: ATA enables basic SCSI support; *however*, |
19 | 'SCSI disk support', 'SCSI tape support', or | |
20 | 'SCSI CDROM support' may also be needed, | |
21 | depending on your hardware configuration. | |
22 | ||
81ce3c4b JG |
23 | if ATA |
24 | ||
8cdf92a9 DW |
25 | config ATA_NONSTANDARD |
26 | bool | |
27 | default n | |
28 | ||
6521148c RH |
29 | config ATA_VERBOSE_ERROR |
30 | bool "Verbose ATA error reporting" | |
31 | default y | |
32 | help | |
33 | This option adds parsing of ATA command descriptions and error bits | |
34 | in libata kernel output, making it easier to interpret. | |
35 | This option will enlarge the kernel by approx. 6KB. Disable it only | |
36 | if kernel size is more important than ease of debugging. | |
37 | ||
38 | If unsure, say Y. | |
39 | ||
e92351bb | 40 | config ATA_ACPI |
c30484d7 | 41 | bool "ATA ACPI Support" |
e92351bb | 42 | depends on ACPI && PCI |
0ac4a3c2 | 43 | select ACPI_DOCK |
e92351bb TH |
44 | default y |
45 | help | |
46 | This option adds support for ATA-related ACPI objects. | |
47 | These ACPI objects add the ability to retrieve taskfiles | |
48 | from the ACPI BIOS and write them to the disk controller. | |
49 | These objects may be related to performance, security, | |
50 | power management, or other areas. | |
51 | You can disable this at kernel boot time by using the | |
52 | option libata.noacpi=1 | |
53 | ||
88fcd562 TH |
54 | config SATA_PMP |
55 | bool "SATA Port Multiplier support" | |
56 | default y | |
57 | help | |
f3360ebf JG |
58 | This option adds support for SATA Port Multipliers |
59 | (the SATA version of an ethernet hub, or SAS expander). | |
88fcd562 | 60 | |
8ad92ba7 | 61 | config SATA_AHCI |
c6fd2807 | 62 | tristate "AHCI SATA support" |
81ce3c4b | 63 | depends on PCI |
c6fd2807 JG |
64 | help |
65 | This option enables support for AHCI Serial ATA. | |
66 | ||
67 | If unsure, say N. | |
68 | ||
127102ae TH |
69 | config SATA_SIL24 |
70 | tristate "Silicon Image 3124/3132 SATA support" | |
71 | depends on PCI | |
72 | help | |
73 | This option enables support for Silicon Image 3124/3132 Serial ATA. | |
74 | ||
75 | If unsure, say N. | |
76 | ||
77 | config SATA_FSL | |
78 | tristate "Freescale 3.0Gbps SATA support" | |
79 | depends on FSL_SOC | |
80 | help | |
81 | This option enables support for Freescale 3.0Gbps SATA controller. | |
82 | It can be found on MPC837x and MPC8315. | |
83 | ||
84 | If unsure, say N. | |
85 | ||
86 | config ATA_SFF | |
87 | bool "ATA SFF support" | |
88 | default y | |
89 | help | |
90 | This option adds support for ATA controllers with SFF | |
91 | compliant or similar programming interface. | |
92 | ||
f3360ebf JG |
93 | SFF is the legacy IDE interface that has been around since |
94 | the dawn of time. Almost all PATA controllers have an | |
95 | SFF interface. Many SATA controllers have an SFF interface | |
96 | when configured into a legacy compatibility mode. | |
97 | ||
98 | For users with exclusively modern controllers like AHCI, | |
99 | Silicon Image 3124, or Marvell 6440, you may choose to | |
692105b8 | 100 | disable this unneeded SFF support. |
f3360ebf JG |
101 | |
102 | If unsure, say Y. | |
103 | ||
127102ae TH |
104 | if ATA_SFF |
105 | ||
8ad92ba7 | 106 | config SATA_SVW |
c6fd2807 | 107 | tristate "ServerWorks Frodo / Apple K2 SATA support" |
81ce3c4b | 108 | depends on PCI |
c6fd2807 JG |
109 | help |
110 | This option enables support for Broadcom/Serverworks/Apple K2 | |
111 | SATA support. | |
112 | ||
113 | If unsure, say N. | |
114 | ||
8ad92ba7 | 115 | config ATA_PIIX |
2c7620d5 | 116 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
81ce3c4b | 117 | depends on PCI |
c6fd2807 | 118 | help |
2bfc3611 | 119 | This option enables support for ICH5/6/7/8 Serial ATA |
2c7620d5 AC |
120 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
121 | host controllers. | |
c6fd2807 JG |
122 | |
123 | If unsure, say N. | |
124 | ||
8ad92ba7 | 125 | config SATA_MV |
f9228c7f | 126 | tristate "Marvell SATA support" |
c6fd2807 JG |
127 | help |
128 | This option enables support for the Marvell Serial ATA family. | |
f9228c7f ML |
129 | Currently supports 88SX[56]0[48][01] PCI(-X) chips, |
130 | as well as the newer [67]042 PCI-X/PCIe and SOC devices. | |
c6fd2807 JG |
131 | |
132 | If unsure, say N. | |
133 | ||
8ad92ba7 | 134 | config SATA_NV |
c6fd2807 | 135 | tristate "NVIDIA SATA support" |
81ce3c4b | 136 | depends on PCI |
c6fd2807 JG |
137 | help |
138 | This option enables support for NVIDIA Serial ATA. | |
139 | ||
140 | If unsure, say N. | |
141 | ||
8ad92ba7 | 142 | config PDC_ADMA |
c6fd2807 | 143 | tristate "Pacific Digital ADMA support" |
81ce3c4b | 144 | depends on PCI |
c6fd2807 JG |
145 | help |
146 | This option enables support for Pacific Digital ADMA controllers | |
147 | ||
148 | If unsure, say N. | |
149 | ||
8ad92ba7 | 150 | config SATA_QSTOR |
c6fd2807 | 151 | tristate "Pacific Digital SATA QStor support" |
81ce3c4b | 152 | depends on PCI |
c6fd2807 JG |
153 | help |
154 | This option enables support for Pacific Digital Serial ATA QStor. | |
155 | ||
156 | If unsure, say N. | |
157 | ||
8ad92ba7 | 158 | config SATA_PROMISE |
c6fd2807 | 159 | tristate "Promise SATA TX2/TX4 support" |
81ce3c4b | 160 | depends on PCI |
c6fd2807 JG |
161 | help |
162 | This option enables support for Promise Serial ATA TX2/TX4. | |
163 | ||
164 | If unsure, say N. | |
165 | ||
8ad92ba7 | 166 | config SATA_SX4 |
e3389cbc | 167 | tristate "Promise SATA SX4 support (Experimental)" |
81ce3c4b | 168 | depends on PCI && EXPERIMENTAL |
c6fd2807 JG |
169 | help |
170 | This option enables support for Promise Serial ATA SX4. | |
171 | ||
172 | If unsure, say N. | |
173 | ||
8ad92ba7 | 174 | config SATA_SIL |
c6fd2807 | 175 | tristate "Silicon Image SATA support" |
81ce3c4b | 176 | depends on PCI |
c6fd2807 JG |
177 | help |
178 | This option enables support for Silicon Image Serial ATA. | |
179 | ||
180 | If unsure, say N. | |
181 | ||
8ad92ba7 | 182 | config SATA_SIS |
9b14dec5 | 183 | tristate "SiS 964/965/966/180 SATA support" |
81ce3c4b | 184 | depends on PCI |
9b14dec5 | 185 | select PATA_SIS |
c6fd2807 | 186 | help |
a617c09f | 187 | This option enables support for SiS Serial ATA on |
9b14dec5 AC |
188 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
189 | The PATA support for SiS 180 requires additionally to | |
190 | enable the PATA_SIS driver in the config. | |
c6fd2807 JG |
191 | If unsure, say N. |
192 | ||
8ad92ba7 | 193 | config SATA_ULI |
c6fd2807 | 194 | tristate "ULi Electronics SATA support" |
81ce3c4b | 195 | depends on PCI |
c6fd2807 JG |
196 | help |
197 | This option enables support for ULi Electronics SATA. | |
198 | ||
199 | If unsure, say N. | |
200 | ||
8ad92ba7 | 201 | config SATA_VIA |
c6fd2807 | 202 | tristate "VIA SATA support" |
81ce3c4b | 203 | depends on PCI |
c6fd2807 JG |
204 | help |
205 | This option enables support for VIA Serial ATA. | |
206 | ||
207 | If unsure, say N. | |
208 | ||
8ad92ba7 | 209 | config SATA_VITESSE |
c6fd2807 | 210 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
81ce3c4b | 211 | depends on PCI |
c6fd2807 JG |
212 | help |
213 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
214 | ||
215 | If unsure, say N. | |
216 | ||
1fd7a697 | 217 | config SATA_INIC162X |
22bfc6d5 TH |
218 | tristate "Initio 162x SATA support" |
219 | depends on PCI | |
1fd7a697 TH |
220 | help |
221 | This option enables support for Initio 162x Serial ATA. | |
222 | ||
025621f9 AC |
223 | config PATA_ACPI |
224 | tristate "ACPI firmware driver for PATA" | |
225 | depends on ATA_ACPI | |
226 | help | |
227 | This option enables an ACPI method driver which drives | |
228 | motherboard PATA controller interfaces through the ACPI | |
229 | firmware in the BIOS. This driver can sometimes handle | |
230 | otherwise unsupported hardware. | |
231 | ||
669a5db4 | 232 | config PATA_ALI |
e3389cbc AC |
233 | tristate "ALi PATA support" |
234 | depends on PCI | |
669a5db4 JG |
235 | help |
236 | This option enables support for the ALi ATA interfaces | |
237 | found on the many ALi chipsets. | |
238 | ||
239 | If unsure, say N. | |
240 | ||
241 | config PATA_AMD | |
942d0947 | 242 | tristate "AMD/NVidia PATA support" |
669a5db4 JG |
243 | depends on PCI |
244 | help | |
245 | This option enables support for the AMD and NVidia PATA | |
246 | interfaces found on the chipsets for Athlon/Athlon64. | |
247 | ||
248 | If unsure, say N. | |
249 | ||
250 | config PATA_ARTOP | |
c645fd34 AC |
251 | tristate "ARTOP 6210/6260 PATA support" |
252 | depends on PCI | |
669a5db4 JG |
253 | help |
254 | This option enables support for ARTOP PATA controllers. | |
255 | ||
256 | If unsure, say N. | |
257 | ||
7c9ef8e4 KNG |
258 | config PATA_AT32 |
259 | tristate "Atmel AVR32 PATA support (Experimental)" | |
260 | depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL | |
261 | help | |
262 | This option enables support for the IDE devices on the | |
263 | Atmel AT32AP platform. | |
264 | ||
265 | If unsure, say N. | |
266 | ||
669a5db4 | 267 | config PATA_ATIIXP |
c645fd34 AC |
268 | tristate "ATI PATA support" |
269 | depends on PCI | |
669a5db4 JG |
270 | help |
271 | This option enables support for the ATI ATA interfaces | |
272 | found on the many ATI chipsets. | |
273 | ||
274 | If unsure, say N. | |
275 | ||
b2248dac | 276 | config PATA_CMD640_PCI |
e3389cbc | 277 | tristate "CMD640 PCI PATA support (Experimental)" |
b2248dac AC |
278 | depends on PCI && EXPERIMENTAL |
279 | help | |
280 | This option enables support for the CMD640 PCI IDE | |
281 | interface chip. Only the primary channel is currently | |
282 | supported. | |
283 | ||
284 | If unsure, say N. | |
285 | ||
669a5db4 | 286 | config PATA_CMD64X |
c645fd34 AC |
287 | tristate "CMD64x PATA support" |
288 | depends on PCI | |
669a5db4 JG |
289 | help |
290 | This option enables support for the CMD64x series chips | |
291 | except for the CMD640. | |
292 | ||
293 | If unsure, say N. | |
294 | ||
295 | config PATA_CS5520 | |
296 | tristate "CS5510/5520 PATA support" | |
297 | depends on PCI | |
298 | help | |
299 | This option enables support for the Cyrix 5510/5520 | |
300 | companion chip used with the MediaGX/Geode processor family. | |
301 | ||
302 | If unsure, say N. | |
303 | ||
304 | config PATA_CS5530 | |
e3389cbc AC |
305 | tristate "CS5530 PATA support" |
306 | depends on PCI | |
669a5db4 JG |
307 | help |
308 | This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
309 | companion chip used with the MediaGX/Geode processor family. | |
310 | ||
311 | If unsure, say N. | |
312 | ||
313 | config PATA_CS5535 | |
314 | tristate "CS5535 PATA support (Experimental)" | |
315 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
316 | help | |
317 | This option enables support for the NatSemi/AMD CS5535 | |
318 | companion chip used with the Geode processor family. | |
319 | ||
320 | If unsure, say N. | |
321 | ||
3957df61 | 322 | config PATA_CS5536 |
e3389cbc AC |
323 | tristate "CS5536 PATA support" |
324 | depends on PCI && X86 && !X86_64 | |
3957df61 MP |
325 | help |
326 | This option enables support for the AMD CS5536 | |
327 | companion chip used with the Geode LX processor family. | |
328 | ||
329 | If unsure, say N. | |
330 | ||
669a5db4 JG |
331 | config PATA_CYPRESS |
332 | tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
333 | depends on PCI && EXPERIMENTAL | |
334 | help | |
335 | This option enables support for the Cypress/Contaq CY82C693 | |
336 | chipset found in some Alpha systems | |
337 | ||
338 | If unsure, say N. | |
339 | ||
340 | config PATA_EFAR | |
341 | tristate "EFAR SLC90E66 support" | |
342 | depends on PCI | |
343 | help | |
344 | This option enables support for the EFAR SLC90E66 | |
345 | IDE controller found on some older machines. | |
346 | ||
347 | If unsure, say N. | |
348 | ||
349 | config ATA_GENERIC | |
350 | tristate "Generic ATA support" | |
351 | depends on PCI | |
352 | help | |
353 | This option enables support for generic BIOS configured | |
354 | ATA controllers via the new ATA layer | |
355 | ||
356 | If unsure, say N. | |
357 | ||
358 | config PATA_HPT366 | |
c645fd34 AC |
359 | tristate "HPT 366/368 PATA support" |
360 | depends on PCI | |
669a5db4 JG |
361 | help |
362 | This option enables support for the HPT 366 and 368 | |
363 | PATA controllers via the new ATA layer. | |
364 | ||
365 | If unsure, say N. | |
366 | ||
367 | config PATA_HPT37X | |
942d0947 | 368 | tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" |
669a5db4 JG |
369 | depends on PCI && EXPERIMENTAL |
370 | help | |
371 | This option enables support for the majority of the later HPT | |
372 | PATA controllers via the new ATA layer. | |
373 | ||
374 | If unsure, say N. | |
375 | ||
376 | config PATA_HPT3X2N | |
e3389cbc | 377 | tristate "HPT 372N/302N PATA support (Experimental)" |
669a5db4 JG |
378 | depends on PCI && EXPERIMENTAL |
379 | help | |
380 | This option enables support for the N variant HPT PATA | |
381 | controllers via the new ATA layer | |
382 | ||
383 | If unsure, say N. | |
384 | ||
385 | config PATA_HPT3X3 | |
66e7da4e | 386 | tristate "HPT 343/363 PATA support" |
669a5db4 JG |
387 | depends on PCI |
388 | help | |
389 | This option enables support for the HPT 343/363 | |
390 | PATA controllers via the new ATA layer | |
391 | ||
392 | If unsure, say N. | |
393 | ||
66e7da4e AC |
394 | config PATA_HPT3X3_DMA |
395 | bool "HPT 343/363 DMA support (Experimental)" | |
396 | depends on PATA_HPT3X3 | |
397 | help | |
398 | This option enables DMA support for the HPT343/363 | |
399 | controllers. Enable with care as there are still some | |
400 | problems with DMA on this chipset. | |
401 | ||
669a5db4 | 402 | config PATA_ISAPNP |
e3389cbc AC |
403 | tristate "ISA Plug and Play PATA support" |
404 | depends on ISAPNP | |
669a5db4 JG |
405 | help |
406 | This option enables support for ISA plug & play ATA | |
407 | controllers such as those found on old soundcards. | |
408 | ||
409 | If unsure, say N. | |
410 | ||
669a5db4 | 411 | config PATA_IT821X |
942d0947 AC |
412 | tristate "IT8211/2 PATA support" |
413 | depends on PCI | |
669a5db4 JG |
414 | help |
415 | This option enables support for the ITE 8211 and 8212 | |
416 | PATA controllers via the new ATA layer, including RAID | |
417 | mode. | |
418 | ||
419 | If unsure, say N. | |
420 | ||
9b13b682 AC |
421 | config PATA_IT8213 |
422 | tristate "IT8213 PATA support (Experimental)" | |
423 | depends on PCI && EXPERIMENTAL | |
424 | help | |
425 | This option enables support for the ITE 821 PATA | |
426 | controllers via the new ATA layer. | |
427 | ||
428 | If unsure, say N. | |
429 | ||
406176ee JG |
430 | config PATA_JMICRON |
431 | tristate "JMicron PATA support" | |
432 | depends on PCI | |
433 | help | |
434 | Enable support for the JMicron IDE controller, via the new | |
435 | ATA layer. | |
436 | ||
437 | If unsure, say N. | |
438 | ||
669a5db4 JG |
439 | config PATA_LEGACY |
440 | tristate "Legacy ISA PATA support (Experimental)" | |
4735ebed | 441 | depends on ISA && EXPERIMENTAL |
669a5db4 JG |
442 | help |
443 | This option enables support for ISA/VLB bus legacy PATA | |
444 | ports and allows them to be accessed via the new ATA layer. | |
445 | ||
446 | If unsure, say N. | |
447 | ||
448 | config PATA_TRIFLEX | |
449 | tristate "Compaq Triflex PATA support" | |
450 | depends on PCI | |
451 | help | |
452 | Enable support for the Compaq 'Triflex' IDE controller as found | |
453 | on many Compaq Pentium-Pro systems, via the new ATA layer. | |
454 | ||
455 | If unsure, say N. | |
456 | ||
75742cb4 AC |
457 | config PATA_MARVELL |
458 | tristate "Marvell PATA support via legacy mode" | |
459 | depends on PCI | |
460 | help | |
5b66c829 AC |
461 | This option enables limited support for the Marvell 88SE61xx ATA |
462 | controllers. If you wish to use only the SATA ports then select | |
463 | the AHCI driver alone. If you wish to the use the PATA port or | |
464 | both SATA and PATA include this driver. | |
75742cb4 AC |
465 | |
466 | If unsure, say N. | |
467 | ||
155d2916 SM |
468 | config PATA_MPC52xx |
469 | tristate "Freescale MPC52xx SoC internal IDE" | |
6b61e69e TY |
470 | depends on PPC_MPC52xx && PPC_BESTCOMM |
471 | select PPC_BESTCOMM_ATA | |
155d2916 SM |
472 | help |
473 | This option enables support for integrated IDE controller | |
474 | of the Freescale MPC52xx SoC. | |
475 | ||
476 | If unsure, say N. | |
477 | ||
669a5db4 JG |
478 | config PATA_MPIIX |
479 | tristate "Intel PATA MPIIX support" | |
480 | depends on PCI | |
481 | help | |
482 | This option enables support for MPIIX PATA support. | |
483 | ||
484 | If unsure, say N. | |
485 | ||
486 | config PATA_OLDPIIX | |
942d0947 AC |
487 | tristate "Intel PATA old PIIX support" |
488 | depends on PCI | |
669a5db4 | 489 | help |
942d0947 | 490 | This option enables support for early PIIX PATA support. |
669a5db4 JG |
491 | |
492 | If unsure, say N. | |
493 | ||
494 | config PATA_NETCELL | |
495 | tristate "NETCELL Revolution RAID support" | |
496 | depends on PCI | |
497 | help | |
498 | This option enables support for the Netcell Revolution RAID | |
499 | PATA controller. | |
500 | ||
501 | If unsure, say N. | |
502 | ||
51dbd490 AC |
503 | config PATA_NINJA32 |
504 | tristate "Ninja32/Delkin Cardbus ATA support (Experimental)" | |
505 | depends on PCI && EXPERIMENTAL | |
506 | help | |
507 | This option enables support for the Ninja32, Delkin and | |
508 | possibly other brands of Cardbus ATA adapter | |
509 | ||
510 | If unsure, say N. | |
511 | ||
669a5db4 | 512 | config PATA_NS87410 |
e3389cbc AC |
513 | tristate "Nat Semi NS87410 PATA support" |
514 | depends on PCI | |
669a5db4 JG |
515 | help |
516 | This option enables support for the National Semiconductor | |
517 | NS87410 PCI-IDE controller. | |
518 | ||
519 | If unsure, say N. | |
520 | ||
c4b5b7b6 | 521 | config PATA_NS87415 |
e3389cbc AC |
522 | tristate "Nat Semi NS87415 PATA support" |
523 | depends on PCI | |
c4b5b7b6 AC |
524 | help |
525 | This option enables support for the National Semiconductor | |
526 | NS87415 PCI-IDE controller. | |
527 | ||
528 | If unsure, say N. | |
529 | ||
669a5db4 JG |
530 | config PATA_OPTI |
531 | tristate "OPTI621/6215 PATA support (Very Experimental)" | |
532 | depends on PCI && EXPERIMENTAL | |
533 | help | |
534 | This option enables full PIO support for the early Opti ATA | |
535 | controllers found on some old motherboards. | |
536 | ||
537 | If unsure, say N. | |
538 | ||
539 | config PATA_OPTIDMA | |
516e72cb | 540 | tristate "OPTI FireStar PATA support (Very Experimental)" |
669a5db4 JG |
541 | depends on PCI && EXPERIMENTAL |
542 | help | |
543 | This option enables DMA/PIO support for the later OPTi | |
544 | controllers found on some old motherboards and in some | |
3dde6ad8 | 545 | laptops. |
669a5db4 JG |
546 | |
547 | If unsure, say N. | |
548 | ||
5a9d2515 MV |
549 | config PATA_PALMLD |
550 | tristate "Palm LifeDrive PATA support" | |
551 | depends on MACH_PALMLD | |
552 | help | |
553 | This option enables support for Palm LifeDrive's internal ATA | |
554 | port via the new ATA layer. | |
555 | ||
556 | If unsure, say N. | |
557 | ||
669a5db4 JG |
558 | config PATA_PCMCIA |
559 | tristate "PCMCIA PATA support" | |
560 | depends on PCMCIA | |
561 | help | |
562 | This option enables support for PCMCIA ATA interfaces, including | |
563 | compact flash card adapters via the new ATA layer. | |
564 | ||
565 | If unsure, say N. | |
566 | ||
567 | config PATA_PDC_OLD | |
e3389cbc AC |
568 | tristate "Older Promise PATA controller support" |
569 | depends on PCI | |
669a5db4 JG |
570 | help |
571 | This option enables support for the Promise 20246, 20262, 20263, | |
572 | 20265 and 20267 adapters. | |
573 | ||
574 | If unsure, say N. | |
575 | ||
576 | config PATA_QDI | |
577 | tristate "QDI VLB PATA support" | |
4735ebed | 578 | depends on ISA |
669a5db4 JG |
579 | help |
580 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. | |
581 | ||
582 | config PATA_RADISYS | |
e3389cbc | 583 | tristate "RADISYS 82600 PATA support (Experimental)" |
669a5db4 JG |
584 | depends on PCI && EXPERIMENTAL |
585 | help | |
586 | This option enables support for the RADISYS 82600 | |
587 | PATA controllers via the new ATA layer | |
588 | ||
589 | If unsure, say N. | |
590 | ||
3dd654bf RB |
591 | config PATA_RB532 |
592 | tristate "RouterBoard 532 PATA CompactFlash support" | |
593 | depends on MIKROTIK_RB532 | |
3db691da | 594 | help |
3dd654bf | 595 | This option enables support for the RouterBoard 532 |
3db691da FF |
596 | PATA CompactFlash controller. |
597 | ||
598 | If unsure, say N. | |
599 | ||
6b406782 AC |
600 | config PATA_RDC |
601 | tristate "RDC PATA support" | |
602 | depends on PCI | |
603 | help | |
604 | This option enables basic support for the later RDC PATA controllers | |
605 | controllers via the new ATA layer. For the RDC 1010, you need to | |
606 | enable the IT821X driver instead. | |
607 | ||
608 | If unsure, say N. | |
609 | ||
669a5db4 JG |
610 | config PATA_RZ1000 |
611 | tristate "PC Tech RZ1000 PATA support" | |
612 | depends on PCI | |
613 | help | |
614 | This option enables basic support for the PC Tech RZ1000/1 | |
615 | PATA controllers via the new ATA layer | |
616 | ||
617 | If unsure, say N. | |
618 | ||
619 | config PATA_SC1200 | |
e3389cbc AC |
620 | tristate "SC1200 PATA support" |
621 | depends on PCI | |
669a5db4 JG |
622 | help |
623 | This option enables support for the NatSemi/AMD SC1200 SoC | |
624 | companion chip used with the Geode processor family. | |
625 | ||
626 | If unsure, say N. | |
627 | ||
628 | config PATA_SERVERWORKS | |
942d0947 AC |
629 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
630 | depends on PCI | |
669a5db4 JG |
631 | help |
632 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
633 | HT1000 PATA controllers, via the new ATA layer. | |
634 | ||
635 | If unsure, say N. | |
636 | ||
637 | config PATA_PDC2027X | |
638 | tristate "Promise PATA 2027x support" | |
639 | depends on PCI | |
640 | help | |
641 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
642 | ||
643 | If unsure, say N. | |
644 | ||
645 | config PATA_SIL680 | |
646 | tristate "CMD / Silicon Image 680 PATA support" | |
647 | depends on PCI | |
648 | help | |
649 | This option enables support for CMD / Silicon Image 680 PATA. | |
650 | ||
651 | If unsure, say N. | |
652 | ||
653 | config PATA_SIS | |
e3389cbc AC |
654 | tristate "SiS PATA support" |
655 | depends on PCI | |
669a5db4 JG |
656 | help |
657 | This option enables support for SiS PATA controllers | |
658 | ||
659 | If unsure, say N. | |
660 | ||
661 | config PATA_VIA | |
662 | tristate "VIA PATA support" | |
663 | depends on PCI | |
664 | help | |
665 | This option enables support for the VIA PATA interfaces | |
666 | found on the many VIA chipsets. | |
667 | ||
668 | If unsure, say N. | |
669 | ||
670 | config PATA_WINBOND | |
671 | tristate "Winbond SL82C105 PATA support" | |
672 | depends on PCI | |
673 | help | |
674 | This option enables support for SL82C105 PATA devices found in the | |
675 | Netwinder and some other systems | |
676 | ||
677 | If unsure, say N. | |
678 | ||
7e45b0e5 AC |
679 | config PATA_WINBOND_VLB |
680 | tristate "Winbond W83759A VLB PATA support (Experimental)" | |
681 | depends on ISA && EXPERIMENTAL | |
682 | help | |
683 | Support for the Winbond W83759A controller on Vesa Local Bus | |
684 | systems. | |
685 | ||
cc18e0fe BD |
686 | config HAVE_PATA_PLATFORM |
687 | bool | |
688 | help | |
689 | This is an internal configuration node for any machine that | |
690 | uses pata-platform driver to enable the relevant driver in the | |
691 | configuration structure without having to submit endless patches | |
692 | to update the PATA_PLATFORM entry. | |
693 | ||
a20c9e82 PM |
694 | config PATA_PLATFORM |
695 | tristate "Generic platform device PATA support" | |
2ad69677 | 696 | depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM |
a20c9e82 PM |
697 | help |
698 | This option enables support for generic directly connected ATA | |
699 | devices commonly found on embedded systems. | |
700 | ||
701 | If unsure, say N. | |
61f71621 | 702 | |
918d7b7c SM |
703 | config PATA_AT91 |
704 | tristate "PATA support for AT91SAM9260" | |
705 | depends on ARM && ARCH_AT91 | |
706 | help | |
707 | This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. | |
708 | ||
709 | If unsure, say N. | |
710 | ||
61f71621 AV |
711 | config PATA_OF_PLATFORM |
712 | tristate "OpenFirmware platform device PATA support" | |
713 | depends on PATA_PLATFORM && PPC_OF | |
714 | help | |
715 | This option enables support for generic directly connected ATA | |
716 | devices commonly found on embedded systems with OpenFirmware | |
717 | bindings. | |
718 | ||
719 | If unsure, say N. | |
a20c9e82 | 720 | |
73b6a2be RK |
721 | config PATA_ICSIDE |
722 | tristate "Acorn ICS PATA support" | |
723 | depends on ARM && ARCH_ACORN | |
724 | help | |
725 | On Acorn systems, say Y here if you wish to use the ICS PATA | |
726 | interface card. This is not required for ICS partition support. | |
727 | If you are unsure, say N to this. | |
728 | ||
0df0d0a0 AZ |
729 | config PATA_IXP4XX_CF |
730 | tristate "IXP4XX Compact Flash support" | |
731 | depends on ARCH_IXP4XX | |
732 | help | |
733 | This option enables support for a Compact Flash connected on | |
734 | the ixp4xx expansion bus. This driver had been written for | |
735 | Loft/Avila boards in mind but can work with others. | |
736 | ||
737 | If unsure, say N. | |
738 | ||
3c929c6f DD |
739 | config PATA_OCTEON_CF |
740 | tristate "OCTEON Boot Bus Compact Flash support" | |
741 | depends on CPU_CAVIUM_OCTEON | |
742 | help | |
743 | This option enables a polled compact flash driver for use with | |
744 | compact flash cards attached to the OCTEON boot bus. | |
745 | ||
746 | If unsure, say N. | |
747 | ||
a619f981 AI |
748 | config PATA_SCC |
749 | tristate "Toshiba's Cell Reference Set IDE support" | |
aeb9362a | 750 | depends on PCI && PPC_CELLEB |
a619f981 AI |
751 | help |
752 | This option enables support for the built-in IDE controller on | |
753 | Toshiba Cell Reference Board. | |
754 | ||
755 | If unsure, say N. | |
756 | ||
07ab85de AD |
757 | config PATA_SCH |
758 | tristate "Intel SCH PATA support" | |
759 | depends on PCI | |
760 | help | |
761 | This option enables support for Intel SCH PATA on the Intel | |
762 | SCH (US15W, US15L, UL11L) series host controllers. | |
763 | ||
764 | If unsure, say N. | |
765 | ||
d830d173 SZ |
766 | config PATA_BF54X |
767 | tristate "Blackfin 54x ATAPI support" | |
768 | depends on BF542 || BF548 || BF549 | |
769 | help | |
770 | This option enables support for the built-in ATAPI controller on | |
771 | Blackfin 54x family chips. | |
772 | ||
773 | If unsure, say N. | |
774 | ||
127102ae | 775 | endif # ATA_SFF |
b196fc69 | 776 | endif # ATA |