Commit | Line | Data |
---|---|---|
421b20b9 JG |
1 | # |
2 | # SATA/PATA driver configuration | |
3 | # | |
4 | ||
b196fc69 | 5 | menuconfig ATA |
097dac91 | 6 | tristate "Serial ATA and Parallel ATA drivers" |
e25df120 | 7 | depends on HAS_IOMEM |
bf2d401b | 8 | depends on BLOCK |
9317fd4c | 9 | depends on !(M32R || M68K) || BROKEN |
81ce3c4b | 10 | select SCSI |
c6fd2807 JG |
11 | ---help--- |
12 | If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or | |
13 | any other ATA device under Linux, say Y and make sure that you know | |
14 | the name of your ATA host adapter (the card inside your computer | |
15 | that "speaks" the ATA protocol, also called ATA controller), | |
16 | because you will be asked for it. | |
17 | ||
abcdceb9 RD |
18 | NOTE: ATA enables basic SCSI support; *however*, |
19 | 'SCSI disk support', 'SCSI tape support', or | |
20 | 'SCSI CDROM support' may also be needed, | |
21 | depending on your hardware configuration. | |
22 | ||
81ce3c4b JG |
23 | if ATA |
24 | ||
8cdf92a9 DW |
25 | config ATA_NONSTANDARD |
26 | bool | |
27 | default n | |
28 | ||
6521148c RH |
29 | config ATA_VERBOSE_ERROR |
30 | bool "Verbose ATA error reporting" | |
31 | default y | |
32 | help | |
33 | This option adds parsing of ATA command descriptions and error bits | |
34 | in libata kernel output, making it easier to interpret. | |
35 | This option will enlarge the kernel by approx. 6KB. Disable it only | |
36 | if kernel size is more important than ease of debugging. | |
37 | ||
38 | If unsure, say Y. | |
39 | ||
e92351bb | 40 | config ATA_ACPI |
c30484d7 | 41 | bool "ATA ACPI Support" |
e92351bb TH |
42 | depends on ACPI && PCI |
43 | default y | |
44 | help | |
45 | This option adds support for ATA-related ACPI objects. | |
46 | These ACPI objects add the ability to retrieve taskfiles | |
47 | from the ACPI BIOS and write them to the disk controller. | |
48 | These objects may be related to performance, security, | |
49 | power management, or other areas. | |
50 | You can disable this at kernel boot time by using the | |
51 | option libata.noacpi=1 | |
52 | ||
88fcd562 TH |
53 | config SATA_PMP |
54 | bool "SATA Port Multiplier support" | |
55 | default y | |
56 | help | |
f3360ebf JG |
57 | This option adds support for SATA Port Multipliers |
58 | (the SATA version of an ethernet hub, or SAS expander). | |
88fcd562 | 59 | |
9a7780c9 TH |
60 | comment "Controllers with non-SFF native interface" |
61 | ||
8ad92ba7 | 62 | config SATA_AHCI |
c6fd2807 | 63 | tristate "AHCI SATA support" |
81ce3c4b | 64 | depends on PCI |
c6fd2807 JG |
65 | help |
66 | This option enables support for AHCI Serial ATA. | |
67 | ||
68 | If unsure, say N. | |
69 | ||
1c2a49f6 AV |
70 | config SATA_AHCI_PLATFORM |
71 | tristate "Platform AHCI SATA support" | |
72 | help | |
73 | This option enables support for Platform AHCI Serial ATA | |
74 | controllers. | |
75 | ||
76 | If unsure, say N. | |
77 | ||
9a7780c9 TH |
78 | config SATA_FSL |
79 | tristate "Freescale 3.0Gbps SATA support" | |
80 | depends on FSL_SOC | |
127102ae | 81 | help |
9a7780c9 TH |
82 | This option enables support for Freescale 3.0Gbps SATA controller. |
83 | It can be found on MPC837x and MPC8315. | |
127102ae TH |
84 | |
85 | If unsure, say N. | |
86 | ||
6f791460 TH |
87 | config SATA_INIC162X |
88 | tristate "Initio 162x SATA support" | |
89 | depends on PCI | |
90 | help | |
91 | This option enables support for Initio 162x Serial ATA. | |
92 | ||
9a7780c9 TH |
93 | config SATA_SIL24 |
94 | tristate "Silicon Image 3124/3132 SATA support" | |
95 | depends on PCI | |
127102ae | 96 | help |
9a7780c9 | 97 | This option enables support for Silicon Image 3124/3132 Serial ATA. |
127102ae TH |
98 | |
99 | If unsure, say N. | |
100 | ||
101 | config ATA_SFF | |
102 | bool "ATA SFF support" | |
103 | default y | |
104 | help | |
105 | This option adds support for ATA controllers with SFF | |
106 | compliant or similar programming interface. | |
107 | ||
f3360ebf JG |
108 | SFF is the legacy IDE interface that has been around since |
109 | the dawn of time. Almost all PATA controllers have an | |
110 | SFF interface. Many SATA controllers have an SFF interface | |
111 | when configured into a legacy compatibility mode. | |
112 | ||
113 | For users with exclusively modern controllers like AHCI, | |
114 | Silicon Image 3124, or Marvell 6440, you may choose to | |
692105b8 | 115 | disable this unneeded SFF support. |
f3360ebf JG |
116 | |
117 | If unsure, say Y. | |
118 | ||
127102ae TH |
119 | if ATA_SFF |
120 | ||
9a7780c9 TH |
121 | comment "SFF controllers with custom DMA interface" |
122 | ||
123 | config PDC_ADMA | |
124 | tristate "Pacific Digital ADMA support" | |
81ce3c4b | 125 | depends on PCI |
c6fd2807 | 126 | help |
9a7780c9 TH |
127 | This option enables support for Pacific Digital ADMA controllers |
128 | ||
129 | If unsure, say N. | |
130 | ||
131 | config PATA_MPC52xx | |
132 | tristate "Freescale MPC52xx SoC internal IDE" | |
133 | depends on PPC_MPC52xx && PPC_BESTCOMM | |
134 | select PPC_BESTCOMM_ATA | |
135 | help | |
136 | This option enables support for integrated IDE controller | |
137 | of the Freescale MPC52xx SoC. | |
138 | ||
139 | If unsure, say N. | |
140 | ||
141 | config PATA_OCTEON_CF | |
142 | tristate "OCTEON Boot Bus Compact Flash support" | |
143 | depends on CPU_CAVIUM_OCTEON | |
144 | help | |
145 | This option enables a polled compact flash driver for use with | |
146 | compact flash cards attached to the OCTEON boot bus. | |
147 | ||
148 | If unsure, say N. | |
149 | ||
150 | config SATA_QSTOR | |
151 | tristate "Pacific Digital SATA QStor support" | |
152 | depends on PCI | |
153 | help | |
154 | This option enables support for Pacific Digital Serial ATA QStor. | |
155 | ||
156 | If unsure, say N. | |
157 | ||
158 | config SATA_SX4 | |
159 | tristate "Promise SATA SX4 support (Experimental)" | |
160 | depends on PCI && EXPERIMENTAL | |
161 | help | |
162 | This option enables support for Promise Serial ATA SX4. | |
c6fd2807 JG |
163 | |
164 | If unsure, say N. | |
165 | ||
9a7780c9 TH |
166 | config ATA_BMDMA |
167 | bool "ATA BMDMA support" | |
168 | default y | |
169 | help | |
170 | This option adds support for SFF ATA controllers with BMDMA | |
ed4e2f80 SR |
171 | capability. BMDMA stands for bus-master DMA and is the |
172 | de facto DMA interface for SFF controllers. | |
9a7780c9 | 173 | |
ed4e2f80 | 174 | If unsure, say Y. |
9a7780c9 TH |
175 | |
176 | if ATA_BMDMA | |
177 | ||
178 | comment "SATA SFF controllers with BMDMA" | |
179 | ||
8ad92ba7 | 180 | config ATA_PIIX |
2c7620d5 | 181 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
81ce3c4b | 182 | depends on PCI |
c6fd2807 | 183 | help |
2bfc3611 | 184 | This option enables support for ICH5/6/7/8 Serial ATA |
2c7620d5 AC |
185 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
186 | host controllers. | |
c6fd2807 JG |
187 | |
188 | If unsure, say N. | |
189 | ||
8ad92ba7 | 190 | config SATA_MV |
f9228c7f | 191 | tristate "Marvell SATA support" |
c6fd2807 JG |
192 | help |
193 | This option enables support for the Marvell Serial ATA family. | |
f9228c7f ML |
194 | Currently supports 88SX[56]0[48][01] PCI(-X) chips, |
195 | as well as the newer [67]042 PCI-X/PCIe and SOC devices. | |
c6fd2807 JG |
196 | |
197 | If unsure, say N. | |
198 | ||
8ad92ba7 | 199 | config SATA_NV |
c6fd2807 | 200 | tristate "NVIDIA SATA support" |
81ce3c4b | 201 | depends on PCI |
c6fd2807 JG |
202 | help |
203 | This option enables support for NVIDIA Serial ATA. | |
204 | ||
205 | If unsure, say N. | |
206 | ||
8ad92ba7 | 207 | config SATA_PROMISE |
c6fd2807 | 208 | tristate "Promise SATA TX2/TX4 support" |
81ce3c4b | 209 | depends on PCI |
c6fd2807 JG |
210 | help |
211 | This option enables support for Promise Serial ATA TX2/TX4. | |
212 | ||
213 | If unsure, say N. | |
214 | ||
8ad92ba7 | 215 | config SATA_SIL |
c6fd2807 | 216 | tristate "Silicon Image SATA support" |
81ce3c4b | 217 | depends on PCI |
c6fd2807 JG |
218 | help |
219 | This option enables support for Silicon Image Serial ATA. | |
220 | ||
221 | If unsure, say N. | |
222 | ||
8ad92ba7 | 223 | config SATA_SIS |
9b14dec5 | 224 | tristate "SiS 964/965/966/180 SATA support" |
81ce3c4b | 225 | depends on PCI |
9b14dec5 | 226 | select PATA_SIS |
c6fd2807 | 227 | help |
a617c09f | 228 | This option enables support for SiS Serial ATA on |
9b14dec5 AC |
229 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
230 | The PATA support for SiS 180 requires additionally to | |
231 | enable the PATA_SIS driver in the config. | |
c6fd2807 JG |
232 | If unsure, say N. |
233 | ||
9a7780c9 TH |
234 | config SATA_SVW |
235 | tristate "ServerWorks Frodo / Apple K2 SATA support" | |
236 | depends on PCI | |
237 | help | |
238 | This option enables support for Broadcom/Serverworks/Apple K2 | |
239 | SATA support. | |
240 | ||
241 | If unsure, say N. | |
242 | ||
8ad92ba7 | 243 | config SATA_ULI |
c6fd2807 | 244 | tristate "ULi Electronics SATA support" |
81ce3c4b | 245 | depends on PCI |
c6fd2807 JG |
246 | help |
247 | This option enables support for ULi Electronics SATA. | |
248 | ||
249 | If unsure, say N. | |
250 | ||
8ad92ba7 | 251 | config SATA_VIA |
c6fd2807 | 252 | tristate "VIA SATA support" |
81ce3c4b | 253 | depends on PCI |
c6fd2807 JG |
254 | help |
255 | This option enables support for VIA Serial ATA. | |
256 | ||
257 | If unsure, say N. | |
258 | ||
8ad92ba7 | 259 | config SATA_VITESSE |
c6fd2807 | 260 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
81ce3c4b | 261 | depends on PCI |
c6fd2807 JG |
262 | help |
263 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
264 | ||
265 | If unsure, say N. | |
266 | ||
9a7780c9 | 267 | comment "PATA SFF controllers with BMDMA" |
025621f9 | 268 | |
669a5db4 | 269 | config PATA_ALI |
e3389cbc AC |
270 | tristate "ALi PATA support" |
271 | depends on PCI | |
669a5db4 JG |
272 | help |
273 | This option enables support for the ALi ATA interfaces | |
274 | found on the many ALi chipsets. | |
275 | ||
276 | If unsure, say N. | |
277 | ||
278 | config PATA_AMD | |
942d0947 | 279 | tristate "AMD/NVidia PATA support" |
669a5db4 JG |
280 | depends on PCI |
281 | help | |
282 | This option enables support for the AMD and NVidia PATA | |
283 | interfaces found on the chipsets for Athlon/Athlon64. | |
284 | ||
285 | If unsure, say N. | |
286 | ||
287 | config PATA_ARTOP | |
c645fd34 AC |
288 | tristate "ARTOP 6210/6260 PATA support" |
289 | depends on PCI | |
669a5db4 JG |
290 | help |
291 | This option enables support for ARTOP PATA controllers. | |
292 | ||
293 | If unsure, say N. | |
294 | ||
9a7780c9 TH |
295 | config PATA_ATIIXP |
296 | tristate "ATI PATA support" | |
d15d6e6c JJIL |
297 | depends on PCI |
298 | help | |
9a7780c9 TH |
299 | This option enables support for the ATI ATA interfaces |
300 | found on the many ATI chipsets. | |
7c9ef8e4 KNG |
301 | |
302 | If unsure, say N. | |
303 | ||
9a7780c9 TH |
304 | config PATA_ATP867X |
305 | tristate "ARTOP/Acard ATP867X PATA support" | |
c645fd34 | 306 | depends on PCI |
669a5db4 | 307 | help |
9a7780c9 TH |
308 | This option enables support for ARTOP/Acard ATP867X PATA |
309 | controllers. | |
669a5db4 JG |
310 | |
311 | If unsure, say N. | |
312 | ||
9a7780c9 TH |
313 | config PATA_BF54X |
314 | tristate "Blackfin 54x ATAPI support" | |
315 | depends on BF542 || BF548 || BF549 | |
b2248dac | 316 | help |
9a7780c9 TH |
317 | This option enables support for the built-in ATAPI controller on |
318 | Blackfin 54x family chips. | |
b2248dac AC |
319 | |
320 | If unsure, say N. | |
321 | ||
669a5db4 | 322 | config PATA_CMD64X |
c645fd34 AC |
323 | tristate "CMD64x PATA support" |
324 | depends on PCI | |
669a5db4 JG |
325 | help |
326 | This option enables support for the CMD64x series chips | |
327 | except for the CMD640. | |
328 | ||
329 | If unsure, say N. | |
330 | ||
331 | config PATA_CS5520 | |
332 | tristate "CS5510/5520 PATA support" | |
333 | depends on PCI | |
334 | help | |
335 | This option enables support for the Cyrix 5510/5520 | |
336 | companion chip used with the MediaGX/Geode processor family. | |
337 | ||
338 | If unsure, say N. | |
339 | ||
340 | config PATA_CS5530 | |
e3389cbc AC |
341 | tristate "CS5530 PATA support" |
342 | depends on PCI | |
669a5db4 JG |
343 | help |
344 | This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
345 | companion chip used with the MediaGX/Geode processor family. | |
346 | ||
347 | If unsure, say N. | |
348 | ||
349 | config PATA_CS5535 | |
350 | tristate "CS5535 PATA support (Experimental)" | |
351 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
352 | help | |
353 | This option enables support for the NatSemi/AMD CS5535 | |
354 | companion chip used with the Geode processor family. | |
355 | ||
356 | If unsure, say N. | |
357 | ||
3957df61 | 358 | config PATA_CS5536 |
e3389cbc AC |
359 | tristate "CS5536 PATA support" |
360 | depends on PCI && X86 && !X86_64 | |
3957df61 MP |
361 | help |
362 | This option enables support for the AMD CS5536 | |
363 | companion chip used with the Geode LX processor family. | |
364 | ||
365 | If unsure, say N. | |
366 | ||
669a5db4 JG |
367 | config PATA_CYPRESS |
368 | tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
369 | depends on PCI && EXPERIMENTAL | |
370 | help | |
371 | This option enables support for the Cypress/Contaq CY82C693 | |
372 | chipset found in some Alpha systems | |
373 | ||
374 | If unsure, say N. | |
375 | ||
376 | config PATA_EFAR | |
377 | tristate "EFAR SLC90E66 support" | |
378 | depends on PCI | |
379 | help | |
380 | This option enables support for the EFAR SLC90E66 | |
381 | IDE controller found on some older machines. | |
382 | ||
383 | If unsure, say N. | |
384 | ||
669a5db4 | 385 | config PATA_HPT366 |
c645fd34 AC |
386 | tristate "HPT 366/368 PATA support" |
387 | depends on PCI | |
669a5db4 JG |
388 | help |
389 | This option enables support for the HPT 366 and 368 | |
390 | PATA controllers via the new ATA layer. | |
391 | ||
392 | If unsure, say N. | |
393 | ||
394 | config PATA_HPT37X | |
be315d46 AC |
395 | tristate "HPT 370/370A/371/372/374/302 PATA support" |
396 | depends on PCI | |
669a5db4 JG |
397 | help |
398 | This option enables support for the majority of the later HPT | |
399 | PATA controllers via the new ATA layer. | |
400 | ||
401 | If unsure, say N. | |
402 | ||
403 | config PATA_HPT3X2N | |
be315d46 AC |
404 | tristate "HPT 372N/302N PATA support" |
405 | depends on PCI | |
669a5db4 JG |
406 | help |
407 | This option enables support for the N variant HPT PATA | |
408 | controllers via the new ATA layer | |
409 | ||
410 | If unsure, say N. | |
411 | ||
412 | config PATA_HPT3X3 | |
66e7da4e | 413 | tristate "HPT 343/363 PATA support" |
669a5db4 JG |
414 | depends on PCI |
415 | help | |
416 | This option enables support for the HPT 343/363 | |
417 | PATA controllers via the new ATA layer | |
418 | ||
419 | If unsure, say N. | |
420 | ||
66e7da4e | 421 | config PATA_HPT3X3_DMA |
be315d46 | 422 | bool "HPT 343/363 DMA support" |
66e7da4e AC |
423 | depends on PATA_HPT3X3 |
424 | help | |
425 | This option enables DMA support for the HPT343/363 | |
426 | controllers. Enable with care as there are still some | |
427 | problems with DMA on this chipset. | |
428 | ||
9a7780c9 TH |
429 | config PATA_ICSIDE |
430 | tristate "Acorn ICS PATA support" | |
431 | depends on ARM && ARCH_ACORN | |
669a5db4 | 432 | help |
9a7780c9 TH |
433 | On Acorn systems, say Y here if you wish to use the ICS PATA |
434 | interface card. This is not required for ICS partition support. | |
435 | If you are unsure, say N to this. | |
436 | ||
437 | config PATA_IT8213 | |
438 | tristate "IT8213 PATA support (Experimental)" | |
439 | depends on PCI && EXPERIMENTAL | |
440 | help | |
441 | This option enables support for the ITE 821 PATA | |
442 | controllers via the new ATA layer. | |
669a5db4 JG |
443 | |
444 | If unsure, say N. | |
445 | ||
669a5db4 | 446 | config PATA_IT821X |
942d0947 AC |
447 | tristate "IT8211/2 PATA support" |
448 | depends on PCI | |
669a5db4 JG |
449 | help |
450 | This option enables support for the ITE 8211 and 8212 | |
451 | PATA controllers via the new ATA layer, including RAID | |
452 | mode. | |
453 | ||
454 | If unsure, say N. | |
455 | ||
406176ee JG |
456 | config PATA_JMICRON |
457 | tristate "JMicron PATA support" | |
458 | depends on PCI | |
459 | help | |
460 | Enable support for the JMicron IDE controller, via the new | |
461 | ATA layer. | |
462 | ||
463 | If unsure, say N. | |
464 | ||
9a7780c9 TH |
465 | config PATA_MACIO |
466 | tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" | |
467 | depends on PPC_PMAC | |
669a5db4 | 468 | help |
9a7780c9 TH |
469 | Most IDE capable PowerMacs have IDE busses driven by a variant |
470 | of this controller which is part of the Apple chipset used on | |
471 | most PowerMac models. Some models have multiple busses using | |
472 | different chipsets, though generally, MacIO is one of them. | |
669a5db4 | 473 | |
75742cb4 AC |
474 | config PATA_MARVELL |
475 | tristate "Marvell PATA support via legacy mode" | |
476 | depends on PCI | |
477 | help | |
5b66c829 AC |
478 | This option enables limited support for the Marvell 88SE61xx ATA |
479 | controllers. If you wish to use only the SATA ports then select | |
480 | the AHCI driver alone. If you wish to the use the PATA port or | |
481 | both SATA and PATA include this driver. | |
75742cb4 AC |
482 | |
483 | If unsure, say N. | |
484 | ||
669a5db4 JG |
485 | config PATA_NETCELL |
486 | tristate "NETCELL Revolution RAID support" | |
487 | depends on PCI | |
488 | help | |
489 | This option enables support for the Netcell Revolution RAID | |
490 | PATA controller. | |
491 | ||
492 | If unsure, say N. | |
493 | ||
51dbd490 | 494 | config PATA_NINJA32 |
be315d46 AC |
495 | tristate "Ninja32/Delkin Cardbus ATA support" |
496 | depends on PCI | |
51dbd490 AC |
497 | help |
498 | This option enables support for the Ninja32, Delkin and | |
499 | possibly other brands of Cardbus ATA adapter | |
500 | ||
501 | If unsure, say N. | |
502 | ||
c4b5b7b6 | 503 | config PATA_NS87415 |
e3389cbc AC |
504 | tristate "Nat Semi NS87415 PATA support" |
505 | depends on PCI | |
c4b5b7b6 AC |
506 | help |
507 | This option enables support for the National Semiconductor | |
508 | NS87415 PCI-IDE controller. | |
509 | ||
510 | If unsure, say N. | |
511 | ||
9a7780c9 TH |
512 | config PATA_OLDPIIX |
513 | tristate "Intel PATA old PIIX support" | |
514 | depends on PCI | |
669a5db4 | 515 | help |
9a7780c9 | 516 | This option enables support for early PIIX PATA support. |
669a5db4 JG |
517 | |
518 | If unsure, say N. | |
519 | ||
520 | config PATA_OPTIDMA | |
516e72cb | 521 | tristate "OPTI FireStar PATA support (Very Experimental)" |
669a5db4 JG |
522 | depends on PCI && EXPERIMENTAL |
523 | help | |
524 | This option enables DMA/PIO support for the later OPTi | |
525 | controllers found on some old motherboards and in some | |
3dde6ad8 | 526 | laptops. |
669a5db4 JG |
527 | |
528 | If unsure, say N. | |
529 | ||
be315d46 AC |
530 | config PATA_PDC2027X |
531 | tristate "Promise PATA 2027x support" | |
532 | depends on PCI | |
533 | help | |
534 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
535 | ||
536 | If unsure, say N. | |
537 | ||
669a5db4 | 538 | config PATA_PDC_OLD |
e3389cbc AC |
539 | tristate "Older Promise PATA controller support" |
540 | depends on PCI | |
669a5db4 JG |
541 | help |
542 | This option enables support for the Promise 20246, 20262, 20263, | |
543 | 20265 and 20267 adapters. | |
544 | ||
545 | If unsure, say N. | |
546 | ||
669a5db4 | 547 | config PATA_RADISYS |
e3389cbc | 548 | tristate "RADISYS 82600 PATA support (Experimental)" |
669a5db4 JG |
549 | depends on PCI && EXPERIMENTAL |
550 | help | |
551 | This option enables support for the RADISYS 82600 | |
552 | PATA controllers via the new ATA layer | |
553 | ||
554 | If unsure, say N. | |
555 | ||
6b406782 AC |
556 | config PATA_RDC |
557 | tristate "RDC PATA support" | |
558 | depends on PCI | |
559 | help | |
560 | This option enables basic support for the later RDC PATA controllers | |
561 | controllers via the new ATA layer. For the RDC 1010, you need to | |
562 | enable the IT821X driver instead. | |
563 | ||
564 | If unsure, say N. | |
565 | ||
9a7780c9 TH |
566 | config PATA_SC1200 |
567 | tristate "SC1200 PATA support" | |
669a5db4 JG |
568 | depends on PCI |
569 | help | |
9a7780c9 TH |
570 | This option enables support for the NatSemi/AMD SC1200 SoC |
571 | companion chip used with the Geode processor family. | |
669a5db4 JG |
572 | |
573 | If unsure, say N. | |
574 | ||
9a7780c9 TH |
575 | config PATA_SCC |
576 | tristate "Toshiba's Cell Reference Set IDE support" | |
577 | depends on PCI && PPC_CELLEB | |
578 | help | |
579 | This option enables support for the built-in IDE controller on | |
580 | Toshiba Cell Reference Board. | |
581 | ||
582 | If unsure, say N. | |
583 | ||
584 | config PATA_SCH | |
585 | tristate "Intel SCH PATA support" | |
e3389cbc | 586 | depends on PCI |
669a5db4 | 587 | help |
9a7780c9 TH |
588 | This option enables support for Intel SCH PATA on the Intel |
589 | SCH (US15W, US15L, UL11L) series host controllers. | |
669a5db4 JG |
590 | |
591 | If unsure, say N. | |
592 | ||
593 | config PATA_SERVERWORKS | |
942d0947 AC |
594 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
595 | depends on PCI | |
669a5db4 JG |
596 | help |
597 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
598 | HT1000 PATA controllers, via the new ATA layer. | |
599 | ||
600 | If unsure, say N. | |
601 | ||
669a5db4 JG |
602 | config PATA_SIL680 |
603 | tristate "CMD / Silicon Image 680 PATA support" | |
604 | depends on PCI | |
605 | help | |
606 | This option enables support for CMD / Silicon Image 680 PATA. | |
607 | ||
608 | If unsure, say N. | |
609 | ||
610 | config PATA_SIS | |
e3389cbc AC |
611 | tristate "SiS PATA support" |
612 | depends on PCI | |
669a5db4 JG |
613 | help |
614 | This option enables support for SiS PATA controllers | |
615 | ||
616 | If unsure, say N. | |
617 | ||
8e182a90 AC |
618 | config PATA_TOSHIBA |
619 | tristate "Toshiba Piccolo support (Experimental)" | |
620 | depends on PCI && EXPERIMENTAL | |
621 | help | |
622 | Support for the Toshiba Piccolo controllers. Currently only the | |
623 | primary channel is supported by this driver. | |
624 | ||
625 | If unsure, say N. | |
626 | ||
9a7780c9 TH |
627 | config PATA_TRIFLEX |
628 | tristate "Compaq Triflex PATA support" | |
629 | depends on PCI | |
630 | help | |
631 | Enable support for the Compaq 'Triflex' IDE controller as found | |
632 | on many Compaq Pentium-Pro systems, via the new ATA layer. | |
633 | ||
634 | If unsure, say N. | |
635 | ||
669a5db4 JG |
636 | config PATA_VIA |
637 | tristate "VIA PATA support" | |
638 | depends on PCI | |
639 | help | |
640 | This option enables support for the VIA PATA interfaces | |
641 | found on the many VIA chipsets. | |
642 | ||
643 | If unsure, say N. | |
644 | ||
645 | config PATA_WINBOND | |
646 | tristate "Winbond SL82C105 PATA support" | |
647 | depends on PCI | |
648 | help | |
649 | This option enables support for SL82C105 PATA devices found in the | |
650 | Netwinder and some other systems | |
651 | ||
652 | If unsure, say N. | |
653 | ||
9a7780c9 TH |
654 | endif # ATA_BMDMA |
655 | ||
656 | comment "PIO-only SFF controllers" | |
657 | ||
658 | config PATA_AT32 | |
659 | tristate "Atmel AVR32 PATA support (Experimental)" | |
660 | depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL | |
7e45b0e5 | 661 | help |
9a7780c9 TH |
662 | This option enables support for the IDE devices on the |
663 | Atmel AT32AP platform. | |
664 | ||
665 | If unsure, say N. | |
666 | ||
667 | config PATA_AT91 | |
668 | tristate "PATA support for AT91SAM9260" | |
669 | depends on ARM && ARCH_AT91 | |
670 | help | |
671 | This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. | |
672 | ||
673 | If unsure, say N. | |
674 | ||
675 | config PATA_CMD640_PCI | |
676 | tristate "CMD640 PCI PATA support (Experimental)" | |
677 | depends on PCI && EXPERIMENTAL | |
678 | help | |
679 | This option enables support for the CMD640 PCI IDE | |
680 | interface chip. Only the primary channel is currently | |
681 | supported. | |
682 | ||
683 | If unsure, say N. | |
684 | ||
685 | config PATA_ISAPNP | |
686 | tristate "ISA Plug and Play PATA support" | |
687 | depends on ISAPNP | |
688 | help | |
689 | This option enables support for ISA plug & play ATA | |
690 | controllers such as those found on old soundcards. | |
691 | ||
692 | If unsure, say N. | |
693 | ||
694 | config PATA_IXP4XX_CF | |
695 | tristate "IXP4XX Compact Flash support" | |
696 | depends on ARCH_IXP4XX | |
697 | help | |
698 | This option enables support for a Compact Flash connected on | |
699 | the ixp4xx expansion bus. This driver had been written for | |
700 | Loft/Avila boards in mind but can work with others. | |
701 | ||
702 | If unsure, say N. | |
703 | ||
704 | config PATA_MPIIX | |
705 | tristate "Intel PATA MPIIX support" | |
706 | depends on PCI | |
707 | help | |
708 | This option enables support for MPIIX PATA support. | |
709 | ||
710 | If unsure, say N. | |
711 | ||
712 | config PATA_NS87410 | |
713 | tristate "Nat Semi NS87410 PATA support" | |
714 | depends on PCI | |
715 | help | |
716 | This option enables support for the National Semiconductor | |
717 | NS87410 PCI-IDE controller. | |
718 | ||
719 | If unsure, say N. | |
720 | ||
721 | config PATA_OPTI | |
722 | tristate "OPTI621/6215 PATA support (Very Experimental)" | |
723 | depends on PCI && EXPERIMENTAL | |
724 | help | |
725 | This option enables full PIO support for the early Opti ATA | |
726 | controllers found on some old motherboards. | |
727 | ||
728 | If unsure, say N. | |
729 | ||
730 | config PATA_PALMLD | |
731 | tristate "Palm LifeDrive PATA support" | |
732 | depends on MACH_PALMLD | |
733 | help | |
734 | This option enables support for Palm LifeDrive's internal ATA | |
735 | port via the new ATA layer. | |
736 | ||
737 | If unsure, say N. | |
738 | ||
739 | config PATA_PCMCIA | |
740 | tristate "PCMCIA PATA support" | |
741 | depends on PCMCIA | |
742 | help | |
743 | This option enables support for PCMCIA ATA interfaces, including | |
744 | compact flash card adapters via the new ATA layer. | |
745 | ||
746 | If unsure, say N. | |
7e45b0e5 | 747 | |
cc18e0fe BD |
748 | config HAVE_PATA_PLATFORM |
749 | bool | |
750 | help | |
751 | This is an internal configuration node for any machine that | |
752 | uses pata-platform driver to enable the relevant driver in the | |
753 | configuration structure without having to submit endless patches | |
754 | to update the PATA_PLATFORM entry. | |
755 | ||
a20c9e82 PM |
756 | config PATA_PLATFORM |
757 | tristate "Generic platform device PATA support" | |
2ad69677 | 758 | depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM |
a20c9e82 PM |
759 | help |
760 | This option enables support for generic directly connected ATA | |
761 | devices commonly found on embedded systems. | |
762 | ||
763 | If unsure, say N. | |
61f71621 AV |
764 | |
765 | config PATA_OF_PLATFORM | |
766 | tristate "OpenFirmware platform device PATA support" | |
767 | depends on PATA_PLATFORM && PPC_OF | |
768 | help | |
769 | This option enables support for generic directly connected ATA | |
770 | devices commonly found on embedded systems with OpenFirmware | |
771 | bindings. | |
772 | ||
773 | If unsure, say N. | |
a20c9e82 | 774 | |
9a7780c9 TH |
775 | config PATA_QDI |
776 | tristate "QDI VLB PATA support" | |
777 | depends on ISA | |
73b6a2be | 778 | help |
9a7780c9 | 779 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. |
73b6a2be | 780 | |
9a7780c9 TH |
781 | config PATA_RB532 |
782 | tristate "RouterBoard 532 PATA CompactFlash support" | |
783 | depends on MIKROTIK_RB532 | |
0df0d0a0 | 784 | help |
9a7780c9 TH |
785 | This option enables support for the RouterBoard 532 |
786 | PATA CompactFlash controller. | |
0df0d0a0 AZ |
787 | |
788 | If unsure, say N. | |
789 | ||
9a7780c9 TH |
790 | config PATA_RZ1000 |
791 | tristate "PC Tech RZ1000 PATA support" | |
792 | depends on PCI | |
3c929c6f | 793 | help |
9a7780c9 TH |
794 | This option enables basic support for the PC Tech RZ1000/1 |
795 | PATA controllers via the new ATA layer | |
3c929c6f DD |
796 | |
797 | If unsure, say N. | |
798 | ||
9a7780c9 TH |
799 | config PATA_WINBOND_VLB |
800 | tristate "Winbond W83759A VLB PATA support (Experimental)" | |
801 | depends on ISA && EXPERIMENTAL | |
a619f981 | 802 | help |
9a7780c9 TH |
803 | Support for the Winbond W83759A controller on Vesa Local Bus |
804 | systems. | |
a619f981 | 805 | |
9a7780c9 | 806 | comment "Generic fallback / legacy drivers" |
a619f981 | 807 | |
9a7780c9 TH |
808 | config PATA_ACPI |
809 | tristate "ACPI firmware driver for PATA" | |
810 | depends on ATA_ACPI && ATA_BMDMA | |
07ab85de | 811 | help |
9a7780c9 TH |
812 | This option enables an ACPI method driver which drives |
813 | motherboard PATA controller interfaces through the ACPI | |
814 | firmware in the BIOS. This driver can sometimes handle | |
815 | otherwise unsupported hardware. | |
07ab85de | 816 | |
9a7780c9 TH |
817 | config ATA_GENERIC |
818 | tristate "Generic ATA support" | |
819 | depends on PCI && ATA_BMDMA | |
d830d173 | 820 | help |
9a7780c9 TH |
821 | This option enables support for generic BIOS configured |
822 | ATA controllers via the new ATA layer | |
d830d173 SZ |
823 | |
824 | If unsure, say N. | |
825 | ||
9a7780c9 TH |
826 | config PATA_LEGACY |
827 | tristate "Legacy ISA PATA support (Experimental)" | |
828 | depends on (ISA || PCI) && EXPERIMENTAL | |
88358ab0 | 829 | help |
9a7780c9 TH |
830 | This option enables support for ISA/VLB/PCI bus legacy PATA |
831 | ports and allows them to be accessed via the new ATA layer. | |
88358ab0 | 832 | |
9a7780c9 | 833 | If unsure, say N. |
88358ab0 | 834 | |
127102ae | 835 | endif # ATA_SFF |
b196fc69 | 836 | endif # ATA |