x86: fill in missing pv_mmu_ops entries for PAGETABLE_LEVELS >= 3
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / x86 / kernel / vmlinux_32.lds.S
CommitLineData
a60b778b
TG
1/* ld script to make i386 Linux kernel
2 * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
3 *
4 * Don't define absolute symbols until and unless you know that symbol
5 * value is should remain constant even if kernel image is relocated
6 * at run time. Absolute symbols are not relocated. If symbol value should
7 * change if kernel is relocated, make the symbol section relative and
8 * put it inside the section definition.
9 */
10
a60b778b
TG
11#define LOAD_OFFSET __PAGE_OFFSET
12
13#include <asm-generic/vmlinux.lds.h>
14#include <asm/thread_info.h>
15#include <asm/page.h>
16#include <asm/cache.h>
17#include <asm/boot.h>
18
19OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
20OUTPUT_ARCH(i386)
21ENTRY(phys_startup_32)
22jiffies = jiffies_64;
23
24PHDRS {
25 text PT_LOAD FLAGS(5); /* R_E */
26 data PT_LOAD FLAGS(7); /* RWE */
27 note PT_NOTE FLAGS(0); /* ___ */
28}
29SECTIONS
30{
31 . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
32 phys_startup_32 = startup_32 - LOAD_OFFSET;
33
34 .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
35 _text = .; /* Text and read-only data */
36 *(.text.head)
37 } :text = 0x9090
38
39 /* read-only */
40 .text : AT(ADDR(.text) - LOAD_OFFSET) {
4c491562
ED
41 . = ALIGN(4096); /* not really needed, already page aligned */
42 *(.text.page_aligned)
a60b778b
TG
43 TEXT_TEXT
44 SCHED_TEXT
45 LOCK_TEXT
46 KPROBES_TEXT
47 *(.fixup)
48 *(.gnu.warning)
49 _etext = .; /* End of text section */
50 } :text = 0x9090
51
52 . = ALIGN(16); /* Exception table */
53 __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
54 __start___ex_table = .;
55 *(__ex_table)
56 __stop___ex_table = .;
57 }
58
59 NOTES :text :note
60
61 BUG_TABLE :text
62
63 . = ALIGN(4);
64 .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
65 __tracedata_start = .;
66 *(.tracedata)
67 __tracedata_end = .;
68 }
69
70 RODATA
71
72 /* writeable */
73 . = ALIGN(4096);
74 .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
75 DATA_DATA
76 CONSTRUCTORS
77 } :data
78
79 . = ALIGN(4096);
80 .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
81 __nosave_begin = .;
82 *(.data.nosave)
83 . = ALIGN(4096);
84 __nosave_end = .;
85 }
86
87 . = ALIGN(4096);
88 .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
89 *(.data.page_aligned)
90 *(.data.idt)
91 }
92
93 . = ALIGN(32);
94 .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
95 *(.data.cacheline_aligned)
96 }
97
98 /* rarely changed data like cpu maps */
99 . = ALIGN(32);
100 .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
101 *(.data.read_mostly)
102 _edata = .; /* End of data section */
103 }
104
105 . = ALIGN(THREAD_SIZE); /* init_task */
106 .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
107 *(.data.init_task)
108 }
109
110 /* might get freed after init */
111 . = ALIGN(4096);
112 .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
113 __smp_locks = .;
114 *(.smp_locks)
115 __smp_locks_end = .;
116 }
117 /* will be freed after init
118 * Following ALIGN() is required to make sure no other data falls on the
119 * same page where __smp_alt_end is pointing as that page might be freed
120 * after boot. Always make sure that ALIGN() directive is present after
121 * the section which contains __smp_alt_end.
122 */
123 . = ALIGN(4096);
124
125 /* will be freed after init */
126 . = ALIGN(4096); /* Init code and data */
127 .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
128 __init_begin = .;
129 _sinittext = .;
01ba2bdc 130 INIT_TEXT
a60b778b
TG
131 _einittext = .;
132 }
01ba2bdc
SR
133 .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
134 INIT_DATA
135 }
a60b778b
TG
136 . = ALIGN(16);
137 .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
138 __setup_start = .;
139 *(.init.setup)
140 __setup_end = .;
141 }
142 .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
143 __initcall_start = .;
144 INITCALLS
145 __initcall_end = .;
146 }
147 .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
148 __con_initcall_start = .;
149 *(.con_initcall.init)
150 __con_initcall_end = .;
151 }
152 SECURITY_INIT
153 . = ALIGN(4);
154 .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
155 __alt_instructions = .;
156 *(.altinstructions)
157 __alt_instructions_end = .;
158 }
159 .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
160 *(.altinstr_replacement)
161 }
162 . = ALIGN(4);
163 .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
164 __parainstructions = .;
165 *(.parainstructions)
166 __parainstructions_end = .;
167 }
168 /* .exit.text is discard at runtime, not link time, to deal with references
169 from .altinstructions and .eh_frame */
01ba2bdc
SR
170 .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
171 EXIT_TEXT
172 }
173 .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
174 EXIT_DATA
175 }
a60b778b
TG
176#if defined(CONFIG_BLK_DEV_INITRD)
177 . = ALIGN(4096);
178 .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
179 __initramfs_start = .;
180 *(.init.ramfs)
181 __initramfs_end = .;
182 }
183#endif
184 . = ALIGN(4096);
185 .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
186 __per_cpu_start = .;
187 *(.data.percpu)
188 *(.data.percpu.shared_aligned)
189 __per_cpu_end = .;
190 }
191 . = ALIGN(4096);
192 /* freed after init ends here */
193
194 .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
195 __init_end = .;
196 __bss_start = .; /* BSS */
197 *(.bss.page_aligned)
198 *(.bss)
199 . = ALIGN(4);
200 __bss_stop = .;
201 _end = . ;
202 /* This is where the kernel creates the early boot page tables */
203 . = ALIGN(4096);
204 pg0 = . ;
205 }
206
207 /* Sections to be discarded */
208 /DISCARD/ : {
209 *(.exitcall.exit)
210 }
211
212 STABS_DEBUG
213
214 DWARF_DEBUG
215}