Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/arch/i386/kernel/head.S -- the 32-bit startup code. | |
3 | * | |
4 | * Copyright (C) 1991, 1992 Linus Torvalds | |
5 | * | |
6 | * Enhanced CPU detection and feature setting code by Mike Jagdis | |
7 | * and Martin Mares, November 1997. | |
8 | */ | |
9 | ||
10 | .text | |
1da177e4 LT |
11 | #include <linux/threads.h> |
12 | #include <linux/linkage.h> | |
13 | #include <asm/segment.h> | |
14 | #include <asm/page.h> | |
15 | #include <asm/pgtable.h> | |
16 | #include <asm/desc.h> | |
17 | #include <asm/cache.h> | |
18 | #include <asm/thread_info.h> | |
86feeaa8 | 19 | #include <asm/asm-offsets.h> |
1da177e4 LT |
20 | #include <asm/setup.h> |
21 | ||
22 | /* | |
23 | * References to members of the new_cpu_data structure. | |
24 | */ | |
25 | ||
26 | #define X86 new_cpu_data+CPUINFO_x86 | |
27 | #define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor | |
28 | #define X86_MODEL new_cpu_data+CPUINFO_x86_model | |
29 | #define X86_MASK new_cpu_data+CPUINFO_x86_mask | |
30 | #define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math | |
31 | #define X86_CPUID new_cpu_data+CPUINFO_cpuid_level | |
32 | #define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability | |
33 | #define X86_VENDOR_ID new_cpu_data+CPUINFO_x86_vendor_id | |
34 | ||
35 | /* | |
36 | * This is how much memory *in addition to the memory covered up to | |
9ce8c2ed JF |
37 | * and including _end* we need mapped initially. |
38 | * We need: | |
39 | * - one bit for each possible page, but only in low memory, which means | |
40 | * 2^32/4096/8 = 128K worst case (4G/4G split.) | |
41 | * - enough space to map all low memory, which means | |
42 | * (2^32/4096) / 1024 pages (worst case, non PAE) | |
43 | * (2^32/4096) / 512 + 4 pages (worst case for PAE) | |
44 | * - a few pages for allocator use before the kernel pagetable has | |
45 | * been set up | |
1da177e4 LT |
46 | * |
47 | * Modulo rounding, each megabyte assigned here requires a kilobyte of | |
48 | * memory, which is currently unreclaimed. | |
49 | * | |
50 | * This should be a multiple of a page. | |
51 | */ | |
9ce8c2ed | 52 | LOW_PAGES = 1<<(32-PAGE_SHIFT_asm) |
1da177e4 | 53 | |
1e3e1972 IM |
54 | /* |
55 | * To preserve the DMA pool in PAGEALLOC kernels, we'll allocate | |
56 | * pagetables from above the 16MB DMA limit, so we'll have to set | |
57 | * up pagetables 16MB more (worst-case): | |
58 | */ | |
59 | #ifdef CONFIG_DEBUG_PAGEALLOC | |
60 | LOW_PAGES = LOW_PAGES + 0x1000000 | |
61 | #endif | |
62 | ||
9ce8c2ed JF |
63 | #if PTRS_PER_PMD > 1 |
64 | PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PMD) + PTRS_PER_PGD | |
65 | #else | |
66 | PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PGD) | |
67 | #endif | |
68 | BOOTBITMAP_SIZE = LOW_PAGES / 8 | |
69 | ALLOCATOR_SLOP = 4 | |
70 | ||
71 | INIT_MAP_BEYOND_END = BOOTBITMAP_SIZE + (PAGE_TABLE_SIZE + ALLOCATOR_SLOP)*PAGE_SIZE_asm | |
1da177e4 LT |
72 | |
73 | /* | |
74 | * 32-bit kernel entrypoint; only used by the boot CPU. On entry, | |
75 | * %esi points to the real-mode code as a 32-bit pointer. | |
76 | * CS and DS must be 4 GB flat segments, but we don't depend on | |
77 | * any particular GDT layout, because we load our own as soon as we | |
78 | * can. | |
79 | */ | |
f8657e1b | 80 | .section .text.head,"ax",@progbits |
1da177e4 LT |
81 | ENTRY(startup_32) |
82 | ||
83 | /* | |
84 | * Set segments to known values. | |
85 | */ | |
86 | cld | |
87 | lgdt boot_gdt_descr - __PAGE_OFFSET | |
88 | movl $(__BOOT_DS),%eax | |
89 | movl %eax,%ds | |
90 | movl %eax,%es | |
91 | movl %eax,%fs | |
92 | movl %eax,%gs | |
93 | ||
94 | /* | |
95 | * Clear BSS first so that there are no surprises... | |
96 | * No need to cld as DF is already clear from cld above... | |
97 | */ | |
98 | xorl %eax,%eax | |
99 | movl $__bss_start - __PAGE_OFFSET,%edi | |
100 | movl $__bss_stop - __PAGE_OFFSET,%ecx | |
101 | subl %edi,%ecx | |
102 | shrl $2,%ecx | |
103 | rep ; stosl | |
484b90c4 VG |
104 | /* |
105 | * Copy bootup parameters out of the way. | |
106 | * Note: %esi still has the pointer to the real-mode data. | |
107 | * With the kexec as boot loader, parameter segment might be loaded beyond | |
108 | * kernel image and might not even be addressable by early boot page tables. | |
109 | * (kexec on panic case). Hence copy out the parameters before initializing | |
110 | * page tables. | |
111 | */ | |
112 | movl $(boot_params - __PAGE_OFFSET),%edi | |
113 | movl $(PARAM_SIZE/4),%ecx | |
114 | cld | |
115 | rep | |
116 | movsl | |
117 | movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi | |
118 | andl %esi,%esi | |
119 | jnz 2f # New command line protocol | |
120 | cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR | |
121 | jne 1f | |
122 | movzwl OLD_CL_OFFSET,%esi | |
123 | addl $(OLD_CL_BASE_ADDR),%esi | |
124 | 2: | |
4e498b66 | 125 | movl $(boot_command_line - __PAGE_OFFSET),%edi |
484b90c4 VG |
126 | movl $(COMMAND_LINE_SIZE/4),%ecx |
127 | rep | |
128 | movsl | |
129 | 1: | |
1da177e4 LT |
130 | |
131 | /* | |
132 | * Initialize page tables. This creates a PDE and a set of page | |
133 | * tables, which are located immediately beyond _end. The variable | |
134 | * init_pg_tables_end is set up to point to the first "safe" location. | |
135 | * Mappings are created both at virtual address 0 (identity mapping) | |
136 | * and PAGE_OFFSET for up to _end+sizeof(page tables)+INIT_MAP_BEYOND_END. | |
137 | * | |
138 | * Warning: don't use %esi or the stack in this code. However, %esp | |
139 | * can be used as a GPR if you really need it... | |
140 | */ | |
141 | page_pde_offset = (__PAGE_OFFSET >> 20); | |
142 | ||
143 | movl $(pg0 - __PAGE_OFFSET), %edi | |
144 | movl $(swapper_pg_dir - __PAGE_OFFSET), %edx | |
145 | movl $0x007, %eax /* 0x007 = PRESENT+RW+USER */ | |
146 | 10: | |
147 | leal 0x007(%edi),%ecx /* Create PDE entry */ | |
148 | movl %ecx,(%edx) /* Store identity PDE entry */ | |
149 | movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */ | |
150 | addl $4,%edx | |
151 | movl $1024, %ecx | |
152 | 11: | |
153 | stosl | |
154 | addl $0x1000,%eax | |
155 | loop 11b | |
156 | /* End condition: we must map up to and including INIT_MAP_BEYOND_END */ | |
157 | /* bytes beyond the end of our own page tables; the +0x007 is the attribute bits */ | |
158 | leal (INIT_MAP_BEYOND_END+0x007)(%edi),%ebp | |
159 | cmpl %ebp,%eax | |
160 | jb 10b | |
161 | movl %edi,(init_pg_tables_end - __PAGE_OFFSET) | |
162 | ||
1da177e4 LT |
163 | xorl %ebx,%ebx /* This is the boot CPU (BSP) */ |
164 | jmp 3f | |
1da177e4 LT |
165 | /* |
166 | * Non-boot CPU entry point; entered from trampoline.S | |
167 | * We can't lgdt here, because lgdt itself uses a data segment, but | |
52de74dd | 168 | * we know the trampoline has already loaded the boot_gdt for us. |
f8657e1b VG |
169 | * |
170 | * If cpu hotplug is not supported then this code can go in init section | |
171 | * which will be freed later | |
1da177e4 | 172 | */ |
f8657e1b | 173 | |
5fe4486c | 174 | #ifndef CONFIG_HOTPLUG_CPU |
f8657e1b VG |
175 | .section .init.text,"ax",@progbits |
176 | #endif | |
177 | ||
b1c931e3 EB |
178 | /* Do an early initialization of the fixmap area */ |
179 | movl $(swapper_pg_dir - __PAGE_OFFSET), %edx | |
180 | movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax | |
181 | addl $0x007, %eax /* 0x007 = PRESENT+RW+USER */ | |
182 | movl %eax, 4092(%edx) | |
183 | ||
f8657e1b | 184 | #ifdef CONFIG_SMP |
1da177e4 LT |
185 | ENTRY(startup_32_smp) |
186 | cld | |
187 | movl $(__BOOT_DS),%eax | |
188 | movl %eax,%ds | |
189 | movl %eax,%es | |
190 | movl %eax,%fs | |
191 | movl %eax,%gs | |
192 | ||
193 | /* | |
194 | * New page tables may be in 4Mbyte page mode and may | |
195 | * be using the global pages. | |
196 | * | |
197 | * NOTE! If we are on a 486 we may have no cr4 at all! | |
198 | * So we do not try to touch it unless we really have | |
199 | * some bits in it to set. This won't work if the BSP | |
200 | * implements cr4 but this AP does not -- very unlikely | |
201 | * but be warned! The same applies to the pse feature | |
202 | * if not equally supported. --macro | |
203 | * | |
204 | * NOTE! We have to correct for the fact that we're | |
205 | * not yet offset PAGE_OFFSET.. | |
206 | */ | |
207 | #define cr4_bits mmu_cr4_features-__PAGE_OFFSET | |
208 | movl cr4_bits,%edx | |
209 | andl %edx,%edx | |
210 | jz 6f | |
211 | movl %cr4,%eax # Turn on paging options (PSE,PAE,..) | |
212 | orl %edx,%eax | |
213 | movl %eax,%cr4 | |
214 | ||
215 | btl $5, %eax # check if PAE is enabled | |
216 | jnc 6f | |
217 | ||
218 | /* Check if extended functions are implemented */ | |
219 | movl $0x80000000, %eax | |
220 | cpuid | |
221 | cmpl $0x80000000, %eax | |
222 | jbe 6f | |
223 | mov $0x80000001, %eax | |
224 | cpuid | |
225 | /* Execute Disable bit supported? */ | |
226 | btl $20, %edx | |
227 | jnc 6f | |
228 | ||
229 | /* Setup EFER (Extended Feature Enable Register) */ | |
230 | movl $0xc0000080, %ecx | |
231 | rdmsr | |
232 | ||
233 | btsl $11, %eax | |
234 | /* Make changes effective */ | |
235 | wrmsr | |
236 | ||
237 | 6: | |
238 | /* This is a secondary processor (AP) */ | |
239 | xorl %ebx,%ebx | |
240 | incl %ebx | |
241 | ||
1da177e4 | 242 | #endif /* CONFIG_SMP */ |
f8657e1b | 243 | 3: |
1da177e4 LT |
244 | |
245 | /* | |
246 | * Enable paging | |
247 | */ | |
248 | movl $swapper_pg_dir-__PAGE_OFFSET,%eax | |
249 | movl %eax,%cr3 /* set the page table pointer.. */ | |
250 | movl %cr0,%eax | |
251 | orl $0x80000000,%eax | |
252 | movl %eax,%cr0 /* ..and set paging (PG) bit */ | |
253 | ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */ | |
254 | 1: | |
255 | /* Set up the stack pointer */ | |
256 | lss stack_start,%esp | |
257 | ||
258 | /* | |
259 | * Initialize eflags. Some BIOS's leave bits like NT set. This would | |
260 | * confuse the debugger if this code is traced. | |
261 | * XXX - best to initialize before switching to protected mode. | |
262 | */ | |
263 | pushl $0 | |
264 | popfl | |
265 | ||
266 | #ifdef CONFIG_SMP | |
267 | andl %ebx,%ebx | |
268 | jz 1f /* Initial CPU cleans BSS */ | |
269 | jmp checkCPUtype | |
270 | 1: | |
271 | #endif /* CONFIG_SMP */ | |
272 | ||
273 | /* | |
274 | * start system 32-bit setup. We need to re-do some of the things done | |
275 | * in 16-bit mode for the "real" operations. | |
276 | */ | |
277 | call setup_idt | |
278 | ||
1da177e4 LT |
279 | checkCPUtype: |
280 | ||
281 | movl $-1,X86_CPUID # -1 for no CPUID initially | |
282 | ||
283 | /* check if it is 486 or 386. */ | |
284 | /* | |
285 | * XXX - this does a lot of unnecessary setup. Alignment checks don't | |
286 | * apply at our cpl of 0 and the stack ought to be aligned already, and | |
287 | * we don't need to preserve eflags. | |
288 | */ | |
289 | ||
290 | movb $3,X86 # at least 386 | |
291 | pushfl # push EFLAGS | |
292 | popl %eax # get EFLAGS | |
293 | movl %eax,%ecx # save original EFLAGS | |
294 | xorl $0x240000,%eax # flip AC and ID bits in EFLAGS | |
295 | pushl %eax # copy to EFLAGS | |
296 | popfl # set EFLAGS | |
297 | pushfl # get new EFLAGS | |
298 | popl %eax # put it in eax | |
299 | xorl %ecx,%eax # change in flags | |
300 | pushl %ecx # restore original EFLAGS | |
301 | popfl | |
302 | testl $0x40000,%eax # check if AC bit changed | |
303 | je is386 | |
304 | ||
305 | movb $4,X86 # at least 486 | |
306 | testl $0x200000,%eax # check if ID bit changed | |
307 | je is486 | |
308 | ||
309 | /* get vendor info */ | |
310 | xorl %eax,%eax # call CPUID with 0 -> return vendor ID | |
311 | cpuid | |
312 | movl %eax,X86_CPUID # save CPUID level | |
313 | movl %ebx,X86_VENDOR_ID # lo 4 chars | |
314 | movl %edx,X86_VENDOR_ID+4 # next 4 chars | |
315 | movl %ecx,X86_VENDOR_ID+8 # last 4 chars | |
316 | ||
317 | orl %eax,%eax # do we have processor info as well? | |
318 | je is486 | |
319 | ||
320 | movl $1,%eax # Use the CPUID instruction to get CPU type | |
321 | cpuid | |
322 | movb %al,%cl # save reg for future use | |
323 | andb $0x0f,%ah # mask processor family | |
324 | movb %ah,X86 | |
325 | andb $0xf0,%al # mask model | |
326 | shrb $4,%al | |
327 | movb %al,X86_MODEL | |
328 | andb $0x0f,%cl # mask mask revision | |
329 | movb %cl,X86_MASK | |
330 | movl %edx,X86_CAPABILITY | |
331 | ||
332 | is486: movl $0x50022,%ecx # set AM, WP, NE and MP | |
333 | jmp 2f | |
334 | ||
335 | is386: movl $2,%ecx # set MP | |
336 | 2: movl %cr0,%eax | |
337 | andl $0x80000011,%eax # Save PG,PE,ET | |
338 | orl %ecx,%eax | |
339 | movl %eax,%cr0 | |
340 | ||
341 | call check_x87 | |
2a57ff1a | 342 | lgdt early_gdt_descr |
1da177e4 LT |
343 | lidt idt_descr |
344 | ljmp $(__KERNEL_CS),$1f | |
345 | 1: movl $(__KERNEL_DS),%eax # reload all the segment registers | |
346 | movl %eax,%ss # after changing gdt. | |
7c3576d2 | 347 | movl %eax,%fs # gets reset once there's real percpu |
1da177e4 LT |
348 | |
349 | movl $(__USER_DS),%eax # DS/ES contains default USER segment | |
350 | movl %eax,%ds | |
351 | movl %eax,%es | |
352 | ||
464d1a78 JF |
353 | xorl %eax,%eax # Clear GS and LDT |
354 | movl %eax,%gs | |
1da177e4 | 355 | lldt %ax |
f95d47ca | 356 | |
1da177e4 | 357 | cld # gcc2 wants the direction flag cleared at all times |
26fd5e08 | 358 | pushl $0 # fake return address for unwinder |
1da177e4 | 359 | #ifdef CONFIG_SMP |
d92de65c SL |
360 | movb ready, %cl |
361 | movb $1, ready | |
29fe5f3b | 362 | cmpb $0,%cl # the first CPU calls start_kernel |
7c3576d2 JF |
363 | je 1f |
364 | movl $(__KERNEL_PERCPU), %eax | |
365 | movl %eax,%fs # set this cpu's percpu | |
366 | jmp initialize_secondary # all other CPUs call initialize_secondary | |
367 | 1: | |
1da177e4 | 368 | #endif /* CONFIG_SMP */ |
29fe5f3b | 369 | jmp start_kernel |
1da177e4 LT |
370 | |
371 | /* | |
372 | * We depend on ET to be correct. This checks for 287/387. | |
373 | */ | |
374 | check_x87: | |
375 | movb $0,X86_HARD_MATH | |
376 | clts | |
377 | fninit | |
378 | fstsw %ax | |
379 | cmpb $0,%al | |
380 | je 1f | |
381 | movl %cr0,%eax /* no coprocessor: have to set bits */ | |
382 | xorl $4,%eax /* set EM */ | |
383 | movl %eax,%cr0 | |
384 | ret | |
385 | ALIGN | |
386 | 1: movb $1,X86_HARD_MATH | |
387 | .byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */ | |
388 | ret | |
389 | ||
390 | /* | |
391 | * setup_idt | |
392 | * | |
393 | * sets up a idt with 256 entries pointing to | |
394 | * ignore_int, interrupt gates. It doesn't actually load | |
395 | * idt - that can be done only after paging has been enabled | |
396 | * and the kernel moved to PAGE_OFFSET. Interrupts | |
397 | * are enabled elsewhere, when we can be relatively | |
398 | * sure everything is ok. | |
399 | * | |
400 | * Warning: %esi is live across this function. | |
401 | */ | |
402 | setup_idt: | |
403 | lea ignore_int,%edx | |
404 | movl $(__KERNEL_CS << 16),%eax | |
405 | movw %dx,%ax /* selector = 0x0010 = cs */ | |
406 | movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ | |
407 | ||
408 | lea idt_table,%edi | |
409 | mov $256,%ecx | |
410 | rp_sidt: | |
411 | movl %eax,(%edi) | |
412 | movl %edx,4(%edi) | |
413 | addl $8,%edi | |
414 | dec %ecx | |
415 | jne rp_sidt | |
ec5c0926 CE |
416 | |
417 | .macro set_early_handler handler,trapno | |
418 | lea \handler,%edx | |
419 | movl $(__KERNEL_CS << 16),%eax | |
420 | movw %dx,%ax | |
421 | movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ | |
422 | lea idt_table,%edi | |
423 | movl %eax,8*\trapno(%edi) | |
424 | movl %edx,8*\trapno+4(%edi) | |
425 | .endm | |
426 | ||
427 | set_early_handler handler=early_divide_err,trapno=0 | |
428 | set_early_handler handler=early_illegal_opcode,trapno=6 | |
429 | set_early_handler handler=early_protection_fault,trapno=13 | |
430 | set_early_handler handler=early_page_fault,trapno=14 | |
431 | ||
1da177e4 LT |
432 | ret |
433 | ||
ec5c0926 CE |
434 | early_divide_err: |
435 | xor %edx,%edx | |
436 | pushl $0 /* fake errcode */ | |
437 | jmp early_fault | |
438 | ||
439 | early_illegal_opcode: | |
440 | movl $6,%edx | |
441 | pushl $0 /* fake errcode */ | |
442 | jmp early_fault | |
443 | ||
444 | early_protection_fault: | |
445 | movl $13,%edx | |
446 | jmp early_fault | |
447 | ||
448 | early_page_fault: | |
449 | movl $14,%edx | |
450 | jmp early_fault | |
451 | ||
452 | early_fault: | |
453 | cld | |
454 | #ifdef CONFIG_PRINTK | |
382f64ab | 455 | pusha |
ec5c0926 CE |
456 | movl $(__KERNEL_DS),%eax |
457 | movl %eax,%ds | |
458 | movl %eax,%es | |
459 | cmpl $2,early_recursion_flag | |
460 | je hlt_loop | |
461 | incl early_recursion_flag | |
462 | movl %cr2,%eax | |
463 | pushl %eax | |
464 | pushl %edx /* trapno */ | |
465 | pushl $fault_msg | |
466 | #ifdef CONFIG_EARLY_PRINTK | |
467 | call early_printk | |
468 | #else | |
469 | call printk | |
470 | #endif | |
471 | #endif | |
472 | hlt_loop: | |
473 | hlt | |
474 | jmp hlt_loop | |
475 | ||
1da177e4 LT |
476 | /* This is the default interrupt "handler" :-) */ |
477 | ALIGN | |
478 | ignore_int: | |
479 | cld | |
d59745ce | 480 | #ifdef CONFIG_PRINTK |
1da177e4 LT |
481 | pushl %eax |
482 | pushl %ecx | |
483 | pushl %edx | |
484 | pushl %es | |
485 | pushl %ds | |
486 | movl $(__KERNEL_DS),%eax | |
487 | movl %eax,%ds | |
488 | movl %eax,%es | |
ec5c0926 CE |
489 | cmpl $2,early_recursion_flag |
490 | je hlt_loop | |
491 | incl early_recursion_flag | |
1da177e4 LT |
492 | pushl 16(%esp) |
493 | pushl 24(%esp) | |
494 | pushl 32(%esp) | |
495 | pushl 40(%esp) | |
496 | pushl $int_msg | |
c0cdf193 IM |
497 | #ifdef CONFIG_EARLY_PRINTK |
498 | call early_printk | |
499 | #else | |
1da177e4 | 500 | call printk |
c0cdf193 | 501 | #endif |
1da177e4 LT |
502 | addl $(5*4),%esp |
503 | popl %ds | |
504 | popl %es | |
505 | popl %edx | |
506 | popl %ecx | |
507 | popl %eax | |
d59745ce | 508 | #endif |
1da177e4 LT |
509 | iret |
510 | ||
f8657e1b | 511 | .section .text |
1da177e4 LT |
512 | /* |
513 | * Real beginning of normal "text" segment | |
514 | */ | |
515 | ENTRY(stext) | |
516 | ENTRY(_stext) | |
517 | ||
518 | /* | |
519 | * BSS section | |
520 | */ | |
5ead97c8 JF |
521 | .section ".bss.page_aligned","wa" |
522 | .align PAGE_SIZE_asm | |
1da177e4 LT |
523 | ENTRY(swapper_pg_dir) |
524 | .fill 1024,4,0 | |
b1c931e3 EB |
525 | ENTRY(swapper_pg_pmd) |
526 | .fill 1024,4,0 | |
1da177e4 LT |
527 | ENTRY(empty_zero_page) |
528 | .fill 4096,1,0 | |
529 | ||
530 | /* | |
531 | * This starts the data section. | |
532 | */ | |
533 | .data | |
1da177e4 LT |
534 | ENTRY(stack_start) |
535 | .long init_thread_union+THREAD_SIZE | |
536 | .long __BOOT_DS | |
537 | ||
538 | ready: .byte 0 | |
539 | ||
ec5c0926 CE |
540 | early_recursion_flag: |
541 | .long 0 | |
542 | ||
1da177e4 LT |
543 | int_msg: |
544 | .asciz "Unknown interrupt or fault at EIP %p %p %p\n" | |
545 | ||
ec5c0926 | 546 | fault_msg: |
382f64ab IM |
547 | .ascii \ |
548 | /* fault info: */ "BUG: Int %d: CR2 %p\n" \ | |
549 | /* pusha regs: */ " EDI %p ESI %p EBP %p ESP %p\n" \ | |
550 | " EBX %p EDX %p ECX %p EAX %p\n" \ | |
551 | /* fault frame: */ " err %p EIP %p CS %p flg %p\n" \ | |
552 | \ | |
553 | "Stack: %p %p %p %p %p %p %p %p\n" \ | |
554 | " %p %p %p %p %p %p %p %p\n" \ | |
555 | " %p %p %p %p %p %p %p %p\n" | |
ec5c0926 | 556 | |
9702785a | 557 | #include "../../x86/xen/xen-head.S" |
5ead97c8 | 558 | |
1da177e4 LT |
559 | /* |
560 | * The IDT and GDT 'descriptors' are a strange 48-bit object | |
561 | * only used by the lidt and lgdt instructions. They are not | |
562 | * like usual segment descriptors - they consist of a 16-bit | |
563 | * segment size, and 32-bit linear address value: | |
564 | */ | |
565 | ||
566 | .globl boot_gdt_descr | |
567 | .globl idt_descr | |
1da177e4 LT |
568 | |
569 | ALIGN | |
570 | # early boot GDT descriptor (must use 1:1 address mapping) | |
571 | .word 0 # 32 bit align gdt_desc.address | |
572 | boot_gdt_descr: | |
573 | .word __BOOT_DS+7 | |
52de74dd | 574 | .long boot_gdt - __PAGE_OFFSET |
1da177e4 LT |
575 | |
576 | .word 0 # 32-bit align idt_desc.address | |
577 | idt_descr: | |
578 | .word IDT_ENTRIES*8-1 # idt contains 256 entries | |
579 | .long idt_table | |
580 | ||
581 | # boot GDT descriptor (later on used by CPU#0): | |
582 | .word 0 # 32 bit align gdt_desc.address | |
2a57ff1a | 583 | ENTRY(early_gdt_descr) |
1da177e4 | 584 | .word GDT_ENTRIES*8-1 |
7a61d35d | 585 | .long per_cpu__gdt_page /* Overwritten for secondary CPUs */ |
1da177e4 | 586 | |
1da177e4 | 587 | /* |
52de74dd | 588 | * The boot_gdt must mirror the equivalent in setup.S and is |
1da177e4 LT |
589 | * used only for booting. |
590 | */ | |
591 | .align L1_CACHE_BYTES | |
52de74dd | 592 | ENTRY(boot_gdt) |
1da177e4 LT |
593 | .fill GDT_ENTRY_BOOT_CS,8,0 |
594 | .quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */ | |
595 | .quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */ |