projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] ppc64: fix for kexec boot issue
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / ppc64 / kernel / mpic.h
CommitLineData
1da177e4
LT		 1#include <linux/irq.h>
2
3/*
4 * Global registers
5 */
6
7#define MPIC_GREG_BASE 0x01000
8
9#define MPIC_GREG_FEATURE_0 0x00000
10#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000
11#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16
12#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00
13#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8
14#define MPIC_GREG_FEATURE_VERSION_MASK 0xff
15#define MPIC_GREG_FEATURE_1 0x00010
16#define MPIC_GREG_GLOBAL_CONF_0 0x00020
17#define MPIC_GREG_GCONF_RESET 0x80000000
18#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000
19#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff
20#define MPIC_GREG_GLOBAL_CONF_1 0x00030
21#define MPIC_GREG_VENDOR_0 0x00040
22#define MPIC_GREG_VENDOR_1 0x00050
23#define MPIC_GREG_VENDOR_2 0x00060
24#define MPIC_GREG_VENDOR_3 0x00070
25#define MPIC_GREG_VENDOR_ID 0x00080
26#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000
27#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16
28#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00
29#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8
30#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff
31#define MPIC_GREG_PROCESSOR_INIT 0x00090
32#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0
33#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0
34#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0
35#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0
36#define MPIC_GREG_SPURIOUS 0x000e0
37#define MPIC_GREG_TIMER_FREQ 0x000f0
38
39/*
40 *
41 * Timer registers
42 */
43#define MPIC_TIMER_BASE 0x01100
44#define MPIC_TIMER_STRIDE 0x40
45
46#define MPIC_TIMER_CURRENT_CNT 0x00000
47#define MPIC_TIMER_BASE_CNT 0x00010
48#define MPIC_TIMER_VECTOR_PRI 0x00020
49#define MPIC_TIMER_DESTINATION 0x00030
50
51/*
52 * Per-Processor registers
53 */
54
55#define MPIC_CPU_THISBASE 0x00000
56#define MPIC_CPU_BASE 0x20000
57#define MPIC_CPU_STRIDE 0x01000
58
59#define MPIC_CPU_IPI_DISPATCH_0 0x00040
60#define MPIC_CPU_IPI_DISPATCH_1 0x00050
61#define MPIC_CPU_IPI_DISPATCH_2 0x00060
62#define MPIC_CPU_IPI_DISPATCH_3 0x00070
63#define MPIC_CPU_CURRENT_TASK_PRI 0x00080
64#define MPIC_CPU_TASKPRI_MASK 0x0000000f
65#define MPIC_CPU_WHOAMI 0x00090
66#define MPIC_CPU_WHOAMI_MASK 0x0000001f
67#define MPIC_CPU_INTACK 0x000a0
68#define MPIC_CPU_EOI 0x000b0
69
70/*
71 * Per-source registers
72 */
73
74#define MPIC_IRQ_BASE 0x10000
75#define MPIC_IRQ_STRIDE 0x00020
76#define MPIC_IRQ_VECTOR_PRI 0x00000
77#define MPIC_VECPRI_MASK 0x80000000
78#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */
79#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000
80#define MPIC_VECPRI_PRIORITY_SHIFT 16
81#define MPIC_VECPRI_VECTOR_MASK 0x000007ff
82#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000
83#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000
84#define MPIC_VECPRI_POLARITY_MASK 0x00800000
85#define MPIC_VECPRI_SENSE_LEVEL 0x00400000
86#define MPIC_VECPRI_SENSE_EDGE 0x00000000
87#define MPIC_VECPRI_SENSE_MASK 0x00400000
88#define MPIC_IRQ_DESTINATION 0x00010
89
90#define MPIC_MAX_IRQ_SOURCES 2048
91#define MPIC_MAX_CPUS 32
92#define MPIC_MAX_ISU 32
93
94/*
95 * Special vector numbers (internal use only)
96 */
97#define MPIC_VEC_SPURRIOUS 255
98#define MPIC_VEC_IPI_3 254
99#define MPIC_VEC_IPI_2 253
100#define MPIC_VEC_IPI_1 252
101#define MPIC_VEC_IPI_0 251
102
103/* unused */
104#define MPIC_VEC_TIMER_3 250
105#define MPIC_VEC_TIMER_2 249
106#define MPIC_VEC_TIMER_1 248
107#define MPIC_VEC_TIMER_0 247
108
109/* Type definition of the cascade handler */
110typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
111
112#ifdef CONFIG_MPIC_BROKEN_U3
113/* Fixup table entry */
114struct mpic_irq_fixup
115{
116 u8 __iomem *base;
117 unsigned int irq;
118};
119#endif /* CONFIG_MPIC_BROKEN_U3 */
120
121
122/* The instance data of a given MPIC */
123struct mpic
124{
125 /* The "linux" controller struct */
126 hw_irq_controller hc_irq;
127#ifdef CONFIG_SMP
128 hw_irq_controller hc_ipi;
129#endif
130 const char *name;
131 /* Flags */
132 unsigned int flags;
133 /* How many irq sources in a given ISU */
134 unsigned int isu_size;
135 unsigned int isu_shift;
136 unsigned int isu_mask;
137 /* Offset of irq vector numbers */
138 unsigned int irq_offset;
139 unsigned int irq_count;
140 /* Offset of ipi vector numbers */
141 unsigned int ipi_offset;
142 /* Number of sources */
143 unsigned int num_sources;
144 /* Number of CPUs */
145 unsigned int num_cpus;
146 /* cascade handler */
147 mpic_cascade_t cascade;
148 void *cascade_data;
149 unsigned int cascade_vec;
150 /* senses array */
151 unsigned char *senses;
152 unsigned int senses_count;
153
154#ifdef CONFIG_MPIC_BROKEN_U3
155 /* The fixup table */
156 struct mpic_irq_fixup *fixups;
157 spinlock_t fixup_lock;
158#endif
159
160 /* The various ioremap'ed bases */
161 volatile u32 __iomem *gregs;
162 volatile u32 __iomem *tmregs;
163 volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS];
164 volatile u32 __iomem *isus[MPIC_MAX_ISU];
165
166 /* link */
167 struct mpic *next;
168};
169
170/* This is the primary controller, only that one has IPIs and
171 * has afinity control. A non-primary MPIC always uses CPU0
172 * registers only
173 */
174#define MPIC_PRIMARY 0x00000001
175/* Set this for a big-endian MPIC */
176#define MPIC_BIG_ENDIAN 0x00000002
177/* Broken U3 MPIC */
178#define MPIC_BROKEN_U3 0x00000004
179/* Broken IPI registers (autodetected) */
180#define MPIC_BROKEN_IPI 0x00000008
181/* MPIC wants a reset */
182#define MPIC_WANTS_RESET 0x00000010
183
184/* Allocate the controller structure and setup the linux irq descs
185 * for the range if interrupts passed in. No HW initialization is
186 * actually performed.
187 *
188 * @phys_addr: physial base address of the MPIC
189 * @flags: flags, see constants above
190 * @isu_size: number of interrupts in an ISU. Use 0 to use a
191 * standard ISU-less setup (aka powermac)
192 * @irq_offset: first irq number to assign to this mpic
193 * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0
194 * to match the number of sources
195 * @ipi_offset: first irq number to assign to this mpic IPI sources,
196 * used only on primary mpic
197 * @senses: array of sense values
198 * @senses_num: number of entries in the array
199 *
200 * Note about the sense array. If none is passed, all interrupts are
201 * setup to be level negative unless MPIC_BROKEN_U3 is set in which
202 * case they are edge positive (and the array is ignored anyway).
203 * The values in the array start at the first source of the MPIC,
204 * that is senses[0] correspond to linux irq "irq_offset".
205 */
206extern struct mpic *mpic_alloc(unsigned long phys_addr,
207 unsigned int flags,
208 unsigned int isu_size,
209 unsigned int irq_offset,
210 unsigned int irq_count,
211 unsigned int ipi_offset,
212 unsigned char *senses,
213 unsigned int senses_num,
214 const char *name);
215
216/* Assign ISUs, to call before mpic_init()
217 *
218 * @mpic: controller structure as returned by mpic_alloc()
219 * @isu_num: ISU number
220 * @phys_addr: physical address of the ISU
221 */
222extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
223 unsigned long phys_addr);
224
225/* Initialize the controller. After this has been called, none of the above
226 * should be called again for this mpic
227 */
228extern void mpic_init(struct mpic *mpic);
229
230/* Setup a cascade. Currently, only one cascade is supported this
231 * way, though you can always do a normal request_irq() and add
232 * other cascades this way. You should call this _after_ having
233 * added all the ISUs
234 *
235 * @irq_no: "linux" irq number of the cascade (that is offset'ed vector)
236 * @handler: cascade handler function
237 */
238extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder,
239 void *data);
240
241/*
242 * All of the following functions must only be used after the
243 * ISUs have been assigned and the controller fully initialized
244 * with mpic_init()
245 */
246
247
248/* Change/Read the priority of an interrupt. Default is 8 for irqs and
249 * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
250 * IPI number is then the offset'ed (linux irq number mapped to the IPI)
251 */
252extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
253extern unsigned int mpic_irq_get_priority(unsigned int irq);
254
255/* Setup a non-boot CPU */
256extern void mpic_setup_this_cpu(void);
257
fce0d574 258/* Clean up for kexec (or cpu offline or ...) */
6d22d85a 259extern void mpic_teardown_this_cpu(int secondary);
fce0d574 260
1da177e4
LT		 261/* Request IPIs on primary mpic */
262extern void mpic_request_ipis(void);
263
264/* Send an IPI (non offseted number 0..3) */
265extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
266
267/* Fetch interrupt from a given mpic */
268extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
269/* This one gets to the primary mpic */
270extern int mpic_get_irq(struct pt_regs *regs);
c5a3c2e5
AB		 271
272/* global mpic for pSeries */
273extern struct mpic *pSeries_mpic;
kernel source for telekom puls (alcatel/mediatek)