Commit | Line | Data |
---|---|---|
b3d7dc19 CK |
1 | /* |
2 | * thermal support for the cell processor | |
3 | * | |
5f7bdaee CK |
4 | * This module adds some sysfs attributes to cpu and spu nodes. |
5 | * Base for measurements are the digital thermal sensors (DTS) | |
6 | * located on the chip. | |
7 | * The accuracy is 2 degrees, starting from 65 up to 125 degrees celsius | |
8 | * The attributes can be found under | |
9 | * /sys/devices/system/cpu/cpuX/thermal | |
10 | * /sys/devices/system/spu/spuX/thermal | |
11 | * | |
12 | * The following attributes are added for each node: | |
13 | * temperature: | |
14 | * contains the current temperature measured by the DTS | |
15 | * throttle_begin: | |
16 | * throttling begins when temperature is greater or equal to | |
17 | * throttle_begin. Setting this value to 125 prevents throttling. | |
18 | * throttle_end: | |
19 | * throttling is being ceased, if the temperature is lower than | |
20 | * throttle_end. Due to a delay between applying throttling and | |
21 | * a reduced temperature this value should be less than throttle_begin. | |
22 | * A value equal to throttle_begin provides only a very little hysteresis. | |
23 | * throttle_full_stop: | |
24 | * If the temperatrue is greater or equal to throttle_full_stop, | |
25 | * full throttling is applied to the cpu or spu. This value should be | |
26 | * greater than throttle_begin and throttle_end. Setting this value to | |
27 | * 65 prevents the unit from running code at all. | |
28 | * | |
b3d7dc19 CK |
29 | * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 |
30 | * | |
31 | * Author: Christian Krafft <krafft@de.ibm.com> | |
32 | * | |
33 | * This program is free software; you can redistribute it and/or modify | |
34 | * it under the terms of the GNU General Public License as published by | |
35 | * the Free Software Foundation; either version 2, or (at your option) | |
36 | * any later version. | |
37 | * | |
38 | * This program is distributed in the hope that it will be useful, | |
39 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
40 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
41 | * GNU General Public License for more details. | |
42 | * | |
43 | * You should have received a copy of the GNU General Public License | |
44 | * along with this program; if not, write to the Free Software | |
45 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
46 | */ | |
47 | ||
48 | #include <linux/module.h> | |
49 | #include <linux/sysdev.h> | |
50 | #include <linux/kernel.h> | |
51 | #include <linux/cpu.h> | |
52 | #include <asm/spu.h> | |
53 | #include <asm/io.h> | |
54 | #include <asm/prom.h> | |
eef686a0 | 55 | #include <asm/cell-regs.h> |
b3d7dc19 | 56 | |
e28b0031 | 57 | #include "spu_priv1_mmio.h" |
b3d7dc19 | 58 | |
5f7bdaee CK |
59 | #define TEMP_MIN 65 |
60 | #define TEMP_MAX 125 | |
61 | ||
62 | #define SYSDEV_PREFIX_ATTR(_prefix,_name,_mode) \ | |
63 | struct sysdev_attribute attr_ ## _prefix ## _ ## _name = { \ | |
64 | .attr = { .name = __stringify(_name), .mode = _mode }, \ | |
65 | .show = _prefix ## _show_ ## _name, \ | |
66 | .store = _prefix ## _store_ ## _name, \ | |
67 | }; | |
68 | ||
24d560d7 CK |
69 | static inline u8 reg_to_temp(u8 reg_value) |
70 | { | |
5f7bdaee CK |
71 | return ((reg_value & 0x3f) << 1) + TEMP_MIN; |
72 | } | |
73 | ||
74 | static inline u8 temp_to_reg(u8 temp) | |
75 | { | |
76 | return ((temp - TEMP_MIN) >> 1) & 0x3f; | |
24d560d7 CK |
77 | } |
78 | ||
b3d7dc19 CK |
79 | static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev) |
80 | { | |
81 | struct spu *spu; | |
82 | ||
83 | spu = container_of(sysdev, struct spu, sysdev); | |
84 | ||
e28b0031 | 85 | return cbe_get_pmd_regs(spu_devnode(spu)); |
b3d7dc19 CK |
86 | } |
87 | ||
88 | /* returns the value for a given spu in a given register */ | |
89 | static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg) | |
90 | { | |
b3d7dc19 CK |
91 | union spe_reg value; |
92 | struct spu *spu; | |
93 | ||
b3d7dc19 | 94 | spu = container_of(sysdev, struct spu, sysdev); |
b3d7dc19 CK |
95 | value.val = in_be64(®->val); |
96 | ||
fa7f374b | 97 | return value.spe[spu->spe_id]; |
b3d7dc19 CK |
98 | } |
99 | ||
4a0b2b4d AK |
100 | static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr, |
101 | char *buf) | |
b3d7dc19 | 102 | { |
24d560d7 | 103 | u8 value; |
b3d7dc19 CK |
104 | struct cbe_pmd_regs __iomem *pmd_regs; |
105 | ||
106 | pmd_regs = get_pmd_regs(sysdev); | |
107 | ||
108 | value = spu_read_register_value(sysdev, &pmd_regs->ts_ctsr1); | |
24d560d7 CK |
109 | |
110 | return sprintf(buf, "%d\n", reg_to_temp(value)); | |
b3d7dc19 CK |
111 | } |
112 | ||
5f7bdaee CK |
113 | static ssize_t show_throttle(struct cbe_pmd_regs __iomem *pmd_regs, char *buf, int pos) |
114 | { | |
115 | u64 value; | |
116 | ||
117 | value = in_be64(&pmd_regs->tm_tpr.val); | |
118 | /* access the corresponding byte */ | |
119 | value >>= pos; | |
120 | value &= 0x3F; | |
121 | ||
122 | return sprintf(buf, "%d\n", reg_to_temp(value)); | |
123 | } | |
124 | ||
125 | static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char *buf, size_t size, int pos) | |
126 | { | |
127 | u64 reg_value; | |
128 | int temp; | |
129 | u64 new_value; | |
130 | int ret; | |
131 | ||
132 | ret = sscanf(buf, "%u", &temp); | |
133 | ||
134 | if (ret != 1 || temp < TEMP_MIN || temp > TEMP_MAX) | |
135 | return -EINVAL; | |
136 | ||
137 | new_value = temp_to_reg(temp); | |
138 | ||
139 | reg_value = in_be64(&pmd_regs->tm_tpr.val); | |
140 | ||
141 | /* zero out bits for new value */ | |
142 | reg_value &= ~(0xffull << pos); | |
143 | /* set bits to new value */ | |
144 | reg_value |= new_value << pos; | |
145 | ||
146 | out_be64(&pmd_regs->tm_tpr.val, reg_value); | |
147 | return size; | |
148 | } | |
149 | ||
4a0b2b4d AK |
150 | static ssize_t spu_show_throttle_end(struct sys_device *sysdev, |
151 | struct sysdev_attribute *attr, char *buf) | |
5f7bdaee CK |
152 | { |
153 | return show_throttle(get_pmd_regs(sysdev), buf, 0); | |
154 | } | |
155 | ||
4a0b2b4d AK |
156 | static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, |
157 | struct sysdev_attribute *attr, char *buf) | |
5f7bdaee CK |
158 | { |
159 | return show_throttle(get_pmd_regs(sysdev), buf, 8); | |
160 | } | |
161 | ||
4a0b2b4d AK |
162 | static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, |
163 | struct sysdev_attribute *attr, char *buf) | |
5f7bdaee CK |
164 | { |
165 | return show_throttle(get_pmd_regs(sysdev), buf, 16); | |
166 | } | |
167 | ||
4a0b2b4d AK |
168 | static ssize_t spu_store_throttle_end(struct sys_device *sysdev, |
169 | struct sysdev_attribute *attr, const char *buf, size_t size) | |
5f7bdaee CK |
170 | { |
171 | return store_throttle(get_pmd_regs(sysdev), buf, size, 0); | |
172 | } | |
173 | ||
4a0b2b4d AK |
174 | static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, |
175 | struct sysdev_attribute *attr, const char *buf, size_t size) | |
5f7bdaee CK |
176 | { |
177 | return store_throttle(get_pmd_regs(sysdev), buf, size, 8); | |
178 | } | |
179 | ||
4a0b2b4d AK |
180 | static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, |
181 | struct sysdev_attribute *attr, const char *buf, size_t size) | |
5f7bdaee CK |
182 | { |
183 | return store_throttle(get_pmd_regs(sysdev), buf, size, 16); | |
184 | } | |
185 | ||
b3d7dc19 CK |
186 | static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos) |
187 | { | |
188 | struct cbe_pmd_regs __iomem *pmd_regs; | |
189 | u64 value; | |
190 | ||
191 | pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id); | |
192 | value = in_be64(&pmd_regs->ts_ctsr2); | |
193 | ||
24d560d7 | 194 | value = (value >> pos) & 0x3f; |
b3d7dc19 | 195 | |
24d560d7 | 196 | return sprintf(buf, "%d\n", reg_to_temp(value)); |
b3d7dc19 CK |
197 | } |
198 | ||
199 | ||
200 | /* shows the temperature of the DTS on the PPE, | |
201 | * located near the linear thermal sensor */ | |
4a0b2b4d AK |
202 | static ssize_t ppe_show_temp0(struct sys_device *sysdev, |
203 | struct sysdev_attribute *attr, char *buf) | |
b3d7dc19 CK |
204 | { |
205 | return ppe_show_temp(sysdev, buf, 32); | |
206 | } | |
207 | ||
208 | /* shows the temperature of the second DTS on the PPE */ | |
4a0b2b4d AK |
209 | static ssize_t ppe_show_temp1(struct sys_device *sysdev, |
210 | struct sysdev_attribute *attr, char *buf) | |
b3d7dc19 CK |
211 | { |
212 | return ppe_show_temp(sysdev, buf, 0); | |
213 | } | |
214 | ||
4a0b2b4d AK |
215 | static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, |
216 | struct sysdev_attribute *attr, char *buf) | |
5f7bdaee CK |
217 | { |
218 | return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32); | |
219 | } | |
220 | ||
4a0b2b4d AK |
221 | static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, |
222 | struct sysdev_attribute *attr, char *buf) | |
5f7bdaee CK |
223 | { |
224 | return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40); | |
225 | } | |
226 | ||
4a0b2b4d AK |
227 | static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, |
228 | struct sysdev_attribute *attr, char *buf) | |
5f7bdaee CK |
229 | { |
230 | return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48); | |
231 | } | |
232 | ||
4a0b2b4d AK |
233 | static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, |
234 | struct sysdev_attribute *attr, const char *buf, size_t size) | |
5f7bdaee CK |
235 | { |
236 | return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32); | |
237 | } | |
238 | ||
4a0b2b4d AK |
239 | static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, |
240 | struct sysdev_attribute *attr, const char *buf, size_t size) | |
5f7bdaee CK |
241 | { |
242 | return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40); | |
243 | } | |
244 | ||
4a0b2b4d AK |
245 | static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, |
246 | struct sysdev_attribute *attr, const char *buf, size_t size) | |
5f7bdaee CK |
247 | { |
248 | return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48); | |
249 | } | |
250 | ||
251 | ||
b3d7dc19 CK |
252 | static struct sysdev_attribute attr_spu_temperature = { |
253 | .attr = {.name = "temperature", .mode = 0400 }, | |
254 | .show = spu_show_temp, | |
255 | }; | |
256 | ||
5f7bdaee CK |
257 | static SYSDEV_PREFIX_ATTR(spu, throttle_end, 0600); |
258 | static SYSDEV_PREFIX_ATTR(spu, throttle_begin, 0600); | |
259 | static SYSDEV_PREFIX_ATTR(spu, throttle_full_stop, 0600); | |
260 | ||
261 | ||
b3d7dc19 CK |
262 | static struct attribute *spu_attributes[] = { |
263 | &attr_spu_temperature.attr, | |
5f7bdaee CK |
264 | &attr_spu_throttle_end.attr, |
265 | &attr_spu_throttle_begin.attr, | |
266 | &attr_spu_throttle_full_stop.attr, | |
22b6e590 | 267 | NULL, |
b3d7dc19 CK |
268 | }; |
269 | ||
270 | static struct attribute_group spu_attribute_group = { | |
271 | .name = "thermal", | |
272 | .attrs = spu_attributes, | |
273 | }; | |
274 | ||
275 | static struct sysdev_attribute attr_ppe_temperature0 = { | |
276 | .attr = {.name = "temperature0", .mode = 0400 }, | |
277 | .show = ppe_show_temp0, | |
278 | }; | |
279 | ||
280 | static struct sysdev_attribute attr_ppe_temperature1 = { | |
281 | .attr = {.name = "temperature1", .mode = 0400 }, | |
282 | .show = ppe_show_temp1, | |
283 | }; | |
284 | ||
5f7bdaee CK |
285 | static SYSDEV_PREFIX_ATTR(ppe, throttle_end, 0600); |
286 | static SYSDEV_PREFIX_ATTR(ppe, throttle_begin, 0600); | |
287 | static SYSDEV_PREFIX_ATTR(ppe, throttle_full_stop, 0600); | |
288 | ||
b3d7dc19 CK |
289 | static struct attribute *ppe_attributes[] = { |
290 | &attr_ppe_temperature0.attr, | |
291 | &attr_ppe_temperature1.attr, | |
5f7bdaee CK |
292 | &attr_ppe_throttle_end.attr, |
293 | &attr_ppe_throttle_begin.attr, | |
294 | &attr_ppe_throttle_full_stop.attr, | |
22b6e590 | 295 | NULL, |
b3d7dc19 CK |
296 | }; |
297 | ||
298 | static struct attribute_group ppe_attribute_group = { | |
299 | .name = "thermal", | |
300 | .attrs = ppe_attributes, | |
301 | }; | |
302 | ||
303 | /* | |
304 | * initialize throttling with default values | |
305 | */ | |
827e3648 | 306 | static int __init init_default_values(void) |
b3d7dc19 CK |
307 | { |
308 | int cpu; | |
309 | struct cbe_pmd_regs __iomem *pmd_regs; | |
310 | struct sys_device *sysdev; | |
311 | union ppe_spe_reg tpr; | |
312 | union spe_reg str1; | |
313 | u64 str2; | |
314 | union spe_reg cr1; | |
315 | u64 cr2; | |
316 | ||
317 | /* TPR defaults */ | |
318 | /* ppe | |
319 | * 1F - no full stop | |
320 | * 08 - dynamic throttling starts if over 80 degrees | |
321 | * 03 - dynamic throttling ceases if below 70 degrees */ | |
322 | tpr.ppe = 0x1F0803; | |
323 | /* spe | |
324 | * 10 - full stopped when over 96 degrees | |
325 | * 08 - dynamic throttling starts if over 80 degrees | |
326 | * 03 - dynamic throttling ceases if below 70 degrees | |
327 | */ | |
328 | tpr.spe = 0x100803; | |
329 | ||
330 | /* STR defaults */ | |
331 | /* str1 | |
332 | * 10 - stop 16 of 32 cycles | |
333 | */ | |
334 | str1.val = 0x1010101010101010ull; | |
335 | /* str2 | |
336 | * 10 - stop 16 of 32 cycles | |
337 | */ | |
338 | str2 = 0x10; | |
339 | ||
340 | /* CR defaults */ | |
341 | /* cr1 | |
342 | * 4 - normal operation | |
343 | */ | |
344 | cr1.val = 0x0404040404040404ull; | |
345 | /* cr2 | |
346 | * 4 - normal operation | |
347 | */ | |
348 | cr2 = 0x04; | |
349 | ||
350 | for_each_possible_cpu (cpu) { | |
351 | pr_debug("processing cpu %d\n", cpu); | |
352 | sysdev = get_cpu_sysdev(cpu); | |
827e3648 JCD |
353 | |
354 | if (!sysdev) { | |
355 | pr_info("invalid sysdev pointer for cbe_thermal\n"); | |
356 | return -EINVAL; | |
357 | } | |
358 | ||
b3d7dc19 CK |
359 | pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id); |
360 | ||
827e3648 JCD |
361 | if (!pmd_regs) { |
362 | pr_info("invalid CBE regs pointer for cbe_thermal\n"); | |
363 | return -EINVAL; | |
364 | } | |
365 | ||
b3d7dc19 CK |
366 | out_be64(&pmd_regs->tm_str2, str2); |
367 | out_be64(&pmd_regs->tm_str1.val, str1.val); | |
368 | out_be64(&pmd_regs->tm_tpr.val, tpr.val); | |
369 | out_be64(&pmd_regs->tm_cr1.val, cr1.val); | |
370 | out_be64(&pmd_regs->tm_cr2, cr2); | |
371 | } | |
827e3648 JCD |
372 | |
373 | return 0; | |
b3d7dc19 CK |
374 | } |
375 | ||
376 | ||
377 | static int __init thermal_init(void) | |
378 | { | |
827e3648 | 379 | int rc = init_default_values(); |
b3d7dc19 | 380 | |
827e3648 JCD |
381 | if (rc == 0) { |
382 | spu_add_sysdev_attr_group(&spu_attribute_group); | |
383 | cpu_add_sysdev_attr_group(&ppe_attribute_group); | |
384 | } | |
b3d7dc19 | 385 | |
827e3648 | 386 | return rc; |
b3d7dc19 CK |
387 | } |
388 | module_init(thermal_init); | |
389 | ||
390 | static void __exit thermal_exit(void) | |
391 | { | |
392 | spu_remove_sysdev_attr_group(&spu_attribute_group); | |
393 | cpu_remove_sysdev_attr_group(&ppe_attribute_group); | |
394 | } | |
395 | module_exit(thermal_exit); | |
396 | ||
397 | MODULE_LICENSE("GPL"); | |
398 | MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); | |
399 |