projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
mn10300: convert to use __HEAD and HEAD_TEXT macros.
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / powerpc / kernel / head_8xx.S
CommitLineData
14cf11af 1/*
14cf11af
PM		 2 * PowerPC version
3 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
4 * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
5 * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
6 * Low-level exception handlers and MMU support
7 * rewritten by Paul Mackerras.
8 * Copyright (C) 1996 Paul Mackerras.
9 * MPC8xx modifications by Dan Malek
10 * Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
11 *
12 * This file contains low-level support and setup for PowerPC 8xx
13 * embedded processors, including trap and interrupt dispatch.
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
19 *
20 */
21
14cf11af
PM		 22#include <asm/processor.h>
23#include <asm/page.h>
24#include <asm/mmu.h>
25#include <asm/cache.h>
26#include <asm/pgtable.h>
27#include <asm/cputable.h>
28#include <asm/thread_info.h>
29#include <asm/ppc_asm.h>
30#include <asm/asm-offsets.h>
31
32/* Macro to make the code more readable. */
33#ifdef CONFIG_8xx_CPU6
34#define DO_8xx_CPU6(val, reg) \
35 li reg, val; \
36 stw reg, 12(r0); \
37 lwz reg, 12(r0);
38#else
39#define DO_8xx_CPU6(val, reg)
40#endif
748a7683
KG		 41 .section .text.head, "ax"
42_ENTRY(_stext);
43_ENTRY(_start);
14cf11af
PM		 44
45/* MPC8xx
46 * This port was done on an MBX board with an 860. Right now I only
47 * support an ELF compressed (zImage) boot from EPPC-Bug because the
48 * code there loads up some registers before calling us:
49 * r3: ptr to board info data
50 * r4: initrd_start or if no initrd then 0
51 * r5: initrd_end - unused if r4 is 0
52 * r6: Start of command line string
53 * r7: End of command line string
54 *
55 * I decided to use conditional compilation instead of checking PVR and
56 * adding more processor specific branches around code I don't need.
57 * Since this is an embedded processor, I also appreciate any memory
58 * savings I can get.
59 *
60 * The MPC8xx does not have any BATs, but it supports large page sizes.
61 * We first initialize the MMU to support 8M byte pages, then load one
62 * entry into each of the instruction and data TLBs to map the first
63 * 8M 1:1. I also mapped an additional I/O space 1:1 so we can get to
64 * the "internal" processor registers before MMU_init is called.
65 *
66 * The TLB code currently contains a major hack. Since I use the condition
67 * code register, I have to save and restore it. I am out of registers, so
68 * I just store it in memory location 0 (the TLB handlers are not reentrant).
69 * To avoid making any decisions, I need to use the "segment" valid bit
70 * in the first level table, but that would require many changes to the
71 * Linux page directory/table functions that I don't want to do right now.
72 *
73 * I used to use SPRG2 for a temporary register in the TLB handler, but it
74 * has since been put to other uses. I now use a hack to save a register
75 * and the CCR at memory location 0.....Someday I'll fix this.....
76 * -- Dan
77 */
78 .globl __start
79__start:
80 mr r31,r3 /* save parameters */
81 mr r30,r4
82 mr r29,r5
83 mr r28,r6
84 mr r27,r7
85
86 /* We have to turn on the MMU right away so we get cache modes
87 * set correctly.
88 */
89 bl initial_mmu
90
91/* We now have the lower 8 Meg mapped into TLB entries, and the caches
92 * ready to work.
93 */
94
95turn_on_mmu:
96 mfmsr r0
97 ori r0,r0,MSR_DR|MSR_IR
98 mtspr SPRN_SRR1,r0
99 lis r0,start_here@h
100 ori r0,r0,start_here@l
101 mtspr SPRN_SRR0,r0
102 SYNC
103 rfi /* enables MMU */
104
105/*
106 * Exception entry code. This code runs with address translation
107 * turned off, i.e. using physical addresses.
108 * We assume sprg3 has the physical address of the current
109 * task's thread_struct.
110 */
111#define EXCEPTION_PROLOG \
112 mtspr SPRN_SPRG0,r10; \
113 mtspr SPRN_SPRG1,r11; \
114 mfcr r10; \
115 EXCEPTION_PROLOG_1; \
116 EXCEPTION_PROLOG_2
117
118#define EXCEPTION_PROLOG_1 \
119 mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
120 andi. r11,r11,MSR_PR; \
121 tophys(r11,r1); /* use tophys(r1) if kernel */ \
122 beq 1f; \
123 mfspr r11,SPRN_SPRG3; \
124 lwz r11,THREAD_INFO-THREAD(r11); \
125 addi r11,r11,THREAD_SIZE; \
126 tophys(r11,r11); \
1271: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
128
129
130#define EXCEPTION_PROLOG_2 \
131 CLR_TOP32(r11); \
132 stw r10,_CCR(r11); /* save registers */ \
133 stw r12,GPR12(r11); \
134 stw r9,GPR9(r11); \
135 mfspr r10,SPRN_SPRG0; \
136 stw r10,GPR10(r11); \
137 mfspr r12,SPRN_SPRG1; \
138 stw r12,GPR11(r11); \
139 mflr r10; \
140 stw r10,_LINK(r11); \
141 mfspr r12,SPRN_SRR0; \
142 mfspr r9,SPRN_SRR1; \
143 stw r1,GPR1(r11); \
144 stw r1,0(r11); \
145 tovirt(r1,r11); /* set new kernel sp */ \
146 li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
147 MTMSRD(r10); /* (except for mach check in rtas) */ \
148 stw r0,GPR0(r11); \
149 SAVE_4GPRS(3, r11); \
150 SAVE_2GPRS(7, r11)
151
152/*
153 * Note: code which follows this uses cr0.eq (set if from kernel),
154 * r11, r12 (SRR0), and r9 (SRR1).
155 *
156 * Note2: once we have set r1 we are in a position to take exceptions
157 * again, and we could thus set MSR:RI at that point.
158 */
159
160/*
161 * Exception vectors.
162 */
163#define EXCEPTION(n, label, hdlr, xfer) \
164 . = n; \
165label: \
166 EXCEPTION_PROLOG; \
167 addi r3,r1,STACK_FRAME_OVERHEAD; \
168 xfer(n, hdlr)
169
170#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
171 li r10,trap; \
d73e0c99 172 stw r10,_TRAP(r11); \
14cf11af
PM		 173 li r10,MSR_KERNEL; \
174 copyee(r10, r9); \
175 bl tfer; \
176i##n: \
177 .long hdlr; \
178 .long ret
179
180#define COPY_EE(d, s) rlwimi d,s,0,16,16
181#define NOCOPY(d, s)
182
183#define EXC_XFER_STD(n, hdlr) \
184 EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
185 ret_from_except_full)
186
187#define EXC_XFER_LITE(n, hdlr) \
188 EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
189 ret_from_except)
190
191#define EXC_XFER_EE(n, hdlr) \
192 EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
193 ret_from_except_full)
194
195#define EXC_XFER_EE_LITE(n, hdlr) \
196 EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
197 ret_from_except)
198
199/* System reset */
dc1c1ca3 200 EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
14cf11af
PM		 201
202/* Machine check */
203 . = 0x200
204MachineCheck:
205 EXCEPTION_PROLOG
206 mfspr r4,SPRN_DAR
207 stw r4,_DAR(r11)
208 mfspr r5,SPRN_DSISR
209 stw r5,_DSISR(r11)
210 addi r3,r1,STACK_FRAME_OVERHEAD
dc1c1ca3 211 EXC_XFER_STD(0x200, machine_check_exception)
14cf11af
PM		 212
213/* Data access exception.
214 * This is "never generated" by the MPC8xx. We jump to it for other
215 * translation errors.
216 */
217 . = 0x300
218DataAccess:
219 EXCEPTION_PROLOG
220 mfspr r10,SPRN_DSISR
221 stw r10,_DSISR(r11)
222 mr r5,r10
223 mfspr r4,SPRN_DAR
224 EXC_XFER_EE_LITE(0x300, handle_page_fault)
225
226/* Instruction access exception.
227 * This is "never generated" by the MPC8xx. We jump to it for other
228 * translation errors.
229 */
230 . = 0x400
231InstructionAccess:
232 EXCEPTION_PROLOG
233 mr r4,r12
234 mr r5,r9
235 EXC_XFER_EE_LITE(0x400, handle_page_fault)
236
237/* External interrupt */
238 EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
239
240/* Alignment exception */
241 . = 0x600
242Alignment:
243 EXCEPTION_PROLOG
244 mfspr r4,SPRN_DAR
245 stw r4,_DAR(r11)
246 mfspr r5,SPRN_DSISR
247 stw r5,_DSISR(r11)
248 addi r3,r1,STACK_FRAME_OVERHEAD
dc1c1ca3 249 EXC_XFER_EE(0x600, alignment_exception)
14cf11af
PM		 250
251/* Program check exception */
dc1c1ca3 252 EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
14cf11af
PM		 253
254/* No FPU on MPC8xx. This exception is not supposed to happen.
255*/
dc1c1ca3 256 EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
14cf11af
PM		 257
258/* Decrementer */
259 EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
260
dc1c1ca3
SR		 261 EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
262 EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 263
264/* System call */
265 . = 0xc00
266SystemCall:
267 EXCEPTION_PROLOG
268 EXC_XFER_EE_LITE(0xc00, DoSyscall)
269
270/* Single step - not used on 601 */
dc1c1ca3
SR		 271 EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
272 EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
273 EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 274
275/* On the MPC8xx, this is a software emulation interrupt. It occurs
276 * for all unimplemented and illegal instructions.
277 */
278 EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD)
279
280 . = 0x1100
281/*
282 * For the MPC8xx, this is a software tablewalk to load the instruction
283 * TLB. It is modelled after the example in the Motorola manual. The task
284 * switch loads the M_TWB register with the pointer to the first level table.
285 * If we discover there is no second level table (value is zero) or if there
286 * is an invalid pte, we load that into the TLB, which causes another fault
287 * into the TLB Error interrupt where we can handle such problems.
288 * We have to use the MD_xxx registers for the tablewalk because the
289 * equivalent MI_xxx registers only perform the attribute functions.
290 */
291InstructionTLBMiss:
292#ifdef CONFIG_8xx_CPU6
293 stw r3, 8(r0)
294#endif
295 DO_8xx_CPU6(0x3f80, r3)
296 mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
297 mfcr r10
298 stw r10, 0(r0)
299 stw r11, 4(r0)
300 mfspr r10, SPRN_SRR0 /* Get effective address of fault */
74016852
SW		 301#ifdef CONFIG_8xx_CPU15
302 addi r11, r10, 0x1000
303 tlbie r11
304 addi r11, r10, -0x1000
305 tlbie r11
306#endif
14cf11af
PM		 307 DO_8xx_CPU6(0x3780, r3)
308 mtspr SPRN_MD_EPN, r10 /* Have to use MD_EPN for walk, MI_EPN can't */
309 mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
310
311 /* If we are faulting a kernel address, we have to use the
312 * kernel page tables.
313 */
314 andi. r11, r10, 0x0800 /* Address >= 0x80000000 */
315 beq 3f
316 lis r11, swapper_pg_dir@h
317 ori r11, r11, swapper_pg_dir@l
318 rlwimi r10, r11, 0, 2, 19
3193:
320 lwz r11, 0(r10) /* Get the level 1 entry */
321 rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
322 beq 2f /* If zero, don't try to find a pte */
323
324 /* We have a pte table, so load the MI_TWC with the attributes
325 * for this "segment."
326 */
327 ori r11,r11,1 /* Set valid bit */
328 DO_8xx_CPU6(0x2b80, r3)
329 mtspr SPRN_MI_TWC, r11 /* Set segment attributes */
330 DO_8xx_CPU6(0x3b80, r3)
331 mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
332 mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
333 lwz r10, 0(r11) /* Get the pte */
334
76db5bd2
VB		 335#ifdef CONFIG_SWAP
336 /* do not set the _PAGE_ACCESSED bit of a non-present page */
337 andi. r11, r10, _PAGE_PRESENT
338 beq 4f
339 ori r10, r10, _PAGE_ACCESSED
340 mfspr r11, SPRN_MD_TWC /* get the pte address again */
341 stw r10, 0(r11)
3424:
343#else
14cf11af
PM		 344 ori r10, r10, _PAGE_ACCESSED
345 stw r10, 0(r11)
76db5bd2 346#endif
14cf11af
PM		 347
348 /* The Linux PTE won't go exactly into the MMU TLB.
349 * Software indicator bits 21, 22 and 28 must be clear.
350 * Software indicator bits 24, 25, 26, and 27 must be
351 * set. All other Linux PTE bits control the behavior
352 * of the MMU.
353 */
3542: li r11, 0x00f0
355 rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
356 DO_8xx_CPU6(0x2d80, r3)
357 mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
358
359 mfspr r10, SPRN_M_TW /* Restore registers */
360 lwz r11, 0(r0)
361 mtcr r11
362 lwz r11, 4(r0)
363#ifdef CONFIG_8xx_CPU6
364 lwz r3, 8(r0)
365#endif
366 rfi
367
368 . = 0x1200
369DataStoreTLBMiss:
370#ifdef CONFIG_8xx_CPU6
371 stw r3, 8(r0)
372#endif
373 DO_8xx_CPU6(0x3f80, r3)
374 mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
375 mfcr r10
376 stw r10, 0(r0)
377 stw r11, 4(r0)
378 mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
379
380 /* If we are faulting a kernel address, we have to use the
381 * kernel page tables.
382 */
383 andi. r11, r10, 0x0800
384 beq 3f
385 lis r11, swapper_pg_dir@h
386 ori r11, r11, swapper_pg_dir@l
387 rlwimi r10, r11, 0, 2, 19
3883:
389 lwz r11, 0(r10) /* Get the level 1 entry */
390 rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
391 beq 2f /* If zero, don't try to find a pte */
392
393 /* We have a pte table, so load fetch the pte from the table.
394 */
395 ori r11, r11, 1 /* Set valid bit in physical L2 page */
396 DO_8xx_CPU6(0x3b80, r3)
397 mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
398 mfspr r10, SPRN_MD_TWC /* ....and get the pte address */
399 lwz r10, 0(r10) /* Get the pte */
400
401 /* Insert the Guarded flag into the TWC from the Linux PTE.
402 * It is bit 27 of both the Linux PTE and the TWC (at least
403 * I got that right :-). It will be better when we can put
404 * this into the Linux pgd/pmd and load it in the operation
405 * above.
406 */
407 rlwimi r11, r10, 0, 27, 27
408 DO_8xx_CPU6(0x3b80, r3)
409 mtspr SPRN_MD_TWC, r11
410
76db5bd2
VB		 411#ifdef CONFIG_SWAP
412 /* do not set the _PAGE_ACCESSED bit of a non-present page */
413 andi. r11, r10, _PAGE_PRESENT
414 beq 4f
14cf11af 415 ori r10, r10, _PAGE_ACCESSED
76db5bd2
VB		 4164:
417 /* and update pte in table */
418#else
419 ori r10, r10, _PAGE_ACCESSED
420#endif
421 mfspr r11, SPRN_MD_TWC /* get the pte address again */
14cf11af
PM		 422 stw r10, 0(r11)
423
424 /* The Linux PTE won't go exactly into the MMU TLB.
425 * Software indicator bits 21, 22 and 28 must be clear.
426 * Software indicator bits 24, 25, 26, and 27 must be
427 * set. All other Linux PTE bits control the behavior
428 * of the MMU.
429 */
4302: li r11, 0x00f0
431 rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
432 DO_8xx_CPU6(0x3d80, r3)
433 mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
434
435 mfspr r10, SPRN_M_TW /* Restore registers */
436 lwz r11, 0(r0)
437 mtcr r11
438 lwz r11, 4(r0)
439#ifdef CONFIG_8xx_CPU6
440 lwz r3, 8(r0)
441#endif
442 rfi
443
444/* This is an instruction TLB error on the MPC8xx. This could be due
445 * to many reasons, such as executing guarded memory or illegal instruction
446 * addresses. There is nothing to do but handle a big time error fault.
447 */
448 . = 0x1300
449InstructionTLBError:
450 b InstructionAccess
451
452/* This is the data TLB error on the MPC8xx. This could be due to
453 * many reasons, including a dirty update to a pte. We can catch that
454 * one here, but anything else is an error. First, we track down the
455 * Linux pte. If it is valid, write access is allowed, but the
456 * page dirty bit is not set, we will set it and reload the TLB. For
457 * any other case, we bail out to a higher level function that can
458 * handle it.
459 */
460 . = 0x1400
461DataTLBError:
462#ifdef CONFIG_8xx_CPU6
463 stw r3, 8(r0)
464#endif
465 DO_8xx_CPU6(0x3f80, r3)
466 mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
467 mfcr r10
468 stw r10, 0(r0)
469 stw r11, 4(r0)
470
471 /* First, make sure this was a store operation.
472 */
473 mfspr r10, SPRN_DSISR
474 andis. r11, r10, 0x0200 /* If set, indicates store op */
475 beq 2f
476
477 /* The EA of a data TLB miss is automatically stored in the MD_EPN
478 * register. The EA of a data TLB error is automatically stored in
479 * the DAR, but not the MD_EPN register. We must copy the 20 most
480 * significant bits of the EA from the DAR to MD_EPN before we
481 * start walking the page tables. We also need to copy the CASID
482 * value from the M_CASID register.
483 * Addendum: The EA of a data TLB error is _supposed_ to be stored
484 * in DAR, but it seems that this doesn't happen in some cases, such
485 * as when the error is due to a dcbi instruction to a page with a
486 * TLB that doesn't have the changed bit set. In such cases, there
487 * does not appear to be any way to recover the EA of the error
488 * since it is neither in DAR nor MD_EPN. As a workaround, the
489 * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
490 * are initialized in mapin_ram(). This will avoid the problem,
491 * assuming we only use the dcbi instruction on kernel addresses.
492 */
493 mfspr r10, SPRN_DAR
494 rlwinm r11, r10, 0, 0, 19
495 ori r11, r11, MD_EVALID
496 mfspr r10, SPRN_M_CASID
497 rlwimi r11, r10, 0, 28, 31
498 DO_8xx_CPU6(0x3780, r3)
499 mtspr SPRN_MD_EPN, r11
500
501 mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
502
503 /* If we are faulting a kernel address, we have to use the
504 * kernel page tables.
505 */
506 andi. r11, r10, 0x0800
507 beq 3f
508 lis r11, swapper_pg_dir@h
509 ori r11, r11, swapper_pg_dir@l
510 rlwimi r10, r11, 0, 2, 19
5113:
512 lwz r11, 0(r10) /* Get the level 1 entry */
513 rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
514 beq 2f /* If zero, bail */
515
516 /* We have a pte table, so fetch the pte from the table.
517 */
518 ori r11, r11, 1 /* Set valid bit in physical L2 page */
519 DO_8xx_CPU6(0x3b80, r3)
520 mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
521 mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
522 lwz r10, 0(r11) /* Get the pte */
523
524 andi. r11, r10, _PAGE_RW /* Is it writeable? */
525 beq 2f /* Bail out if not */
526
527 /* Update 'changed', among others.
528 */
76db5bd2
VB		 529#ifdef CONFIG_SWAP
530 ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
531 /* do not set the _PAGE_ACCESSED bit of a non-present page */
532 andi. r11, r10, _PAGE_PRESENT
533 beq 4f
534 ori r10, r10, _PAGE_ACCESSED
5354:
536#else
14cf11af 537 ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
76db5bd2 538#endif
14cf11af
PM		 539 mfspr r11, SPRN_MD_TWC /* Get pte address again */
540 stw r10, 0(r11) /* and update pte in table */
541
542 /* The Linux PTE won't go exactly into the MMU TLB.
543 * Software indicator bits 21, 22 and 28 must be clear.
544 * Software indicator bits 24, 25, 26, and 27 must be
545 * set. All other Linux PTE bits control the behavior
546 * of the MMU.
547 */
548 li r11, 0x00f0
549 rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
550 DO_8xx_CPU6(0x3d80, r3)
551 mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
552
553 mfspr r10, SPRN_M_TW /* Restore registers */
554 lwz r11, 0(r0)
555 mtcr r11
556 lwz r11, 4(r0)
557#ifdef CONFIG_8xx_CPU6
558 lwz r3, 8(r0)
559#endif
560 rfi
5612:
562 mfspr r10, SPRN_M_TW /* Restore registers */
563 lwz r11, 0(r0)
564 mtcr r11
565 lwz r11, 4(r0)
566#ifdef CONFIG_8xx_CPU6
567 lwz r3, 8(r0)
568#endif
569 b DataAccess
570
dc1c1ca3
SR		 571 EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
572 EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
573 EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
574 EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
575 EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
576 EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
577 EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 578
579/* On the MPC8xx, these next four traps are used for development
580 * support of breakpoints and such. Someday I will get around to
581 * using them.
582 */
dc1c1ca3
SR		 583 EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
584 EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
585 EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
586 EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 587
588 . = 0x2000
589
590 .globl giveup_fpu
591giveup_fpu:
592 blr
593
594/*
595 * This is where the main kernel code starts.
596 */
597start_here:
598 /* ptr to current */
599 lis r2,init_task@h
600 ori r2,r2,init_task@l
601
602 /* ptr to phys current thread */
603 tophys(r4,r2)
604 addi r4,r4,THREAD /* init task's THREAD */
605 mtspr SPRN_SPRG3,r4
606 li r3,0
607 mtspr SPRN_SPRG2,r3 /* 0 => r1 has kernel sp */
608
609 /* stack */
610 lis r1,init_thread_union@ha
611 addi r1,r1,init_thread_union@l
612 li r0,0
613 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
614
615 bl early_init /* We have to do this with MMU on */
616
617/*
618 * Decide what sort of machine this is and initialize the MMU.
619 */
620 mr r3,r31
621 mr r4,r30
622 mr r5,r29
623 mr r6,r28
624 mr r7,r27
625 bl machine_init
626 bl MMU_init
627
628/*
629 * Go back to running unmapped so we can load up new values
630 * and change to using our exception vectors.
631 * On the 8xx, all we have to do is invalidate the TLB to clear
632 * the old 8M byte TLB mappings and load the page table base register.
633 */
634 /* The right way to do this would be to track it down through
635 * init's THREAD like the context switch code does, but this is
636 * easier......until someone changes init's static structures.
637 */
638 lis r6, swapper_pg_dir@h
639 ori r6, r6, swapper_pg_dir@l
640 tophys(r6,r6)
641#ifdef CONFIG_8xx_CPU6
642 lis r4, cpu6_errata_word@h
643 ori r4, r4, cpu6_errata_word@l
644 li r3, 0x3980
645 stw r3, 12(r4)
646 lwz r3, 12(r4)
647#endif
648 mtspr SPRN_M_TWB, r6
649 lis r4,2f@h
650 ori r4,r4,2f@l
651 tophys(r4,r4)
652 li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
653 mtspr SPRN_SRR0,r4
654 mtspr SPRN_SRR1,r3
655 rfi
656/* Load up the kernel context */
6572:
658 SYNC /* Force all PTE updates to finish */
659 tlbia /* Clear all TLB entries */
660 sync /* wait for tlbia/tlbie to finish */
661 TLBSYNC /* ... on all CPUs */
662
663 /* set up the PTE pointers for the Abatron bdiGDB.
664 */
665 tovirt(r6,r6)
666 lis r5, abatron_pteptrs@h
667 ori r5, r5, abatron_pteptrs@l
668 stw r5, 0xf0(r0) /* Must match your Abatron config file */
669 tophys(r5,r5)
670 stw r6, 0(r5)
671
672/* Now turn on the MMU for real! */
673 li r4,MSR_KERNEL
674 lis r3,start_kernel@h
675 ori r3,r3,start_kernel@l
676 mtspr SPRN_SRR0,r3
677 mtspr SPRN_SRR1,r4
678 rfi /* enable MMU and jump to start_kernel */
679
680/* Set up the initial MMU state so we can do the first level of
681 * kernel initialization. This maps the first 8 MBytes of memory 1:1
682 * virtual to physical. Also, set the cache mode since that is defined
683 * by TLB entries and perform any additional mapping (like of the IMMR).
684 * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
685 * 24 Mbytes of data, and the 8M IMMR space. Anything not covered by
686 * these mappings is mapped by page tables.
687 */
688initial_mmu:
689 tlbia /* Invalidate all TLB entries */
690#ifdef CONFIG_PIN_TLB
691 lis r8, MI_RSV4I@h
692 ori r8, r8, 0x1c00
693#else
694 li r8, 0
695#endif
696 mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */
697
698#ifdef CONFIG_PIN_TLB
699 lis r10, (MD_RSV4I | MD_RESETVAL)@h
700 ori r10, r10, 0x1c00
701 mr r8, r10
702#else
703 lis r10, MD_RESETVAL@h
704#endif
705#ifndef CONFIG_8xx_COPYBACK
706 oris r10, r10, MD_WTDEF@h
707#endif
708 mtspr SPRN_MD_CTR, r10 /* Set data TLB control */
709
710 /* Now map the lower 8 Meg into the TLBs. For this quick hack,
711 * we can load the instruction and data TLB registers with the
712 * same values.
713 */
714 lis r8, KERNELBASE@h /* Create vaddr for TLB */
715 ori r8, r8, MI_EVALID /* Mark it valid */
716 mtspr SPRN_MI_EPN, r8
717 mtspr SPRN_MD_EPN, r8
718 li r8, MI_PS8MEG /* Set 8M byte page */
719 ori r8, r8, MI_SVALID /* Make it valid */
720 mtspr SPRN_MI_TWC, r8
721 mtspr SPRN_MD_TWC, r8
722 li r8, MI_BOOTINIT /* Create RPN for address 0 */
723 mtspr SPRN_MI_RPN, r8 /* Store TLB entry */
724 mtspr SPRN_MD_RPN, r8
725 lis r8, MI_Kp@h /* Set the protection mode */
726 mtspr SPRN_MI_AP, r8
727 mtspr SPRN_MD_AP, r8
728
729 /* Map another 8 MByte at the IMMR to get the processor
730 * internal registers (among other things).
731 */
732#ifdef CONFIG_PIN_TLB
733 addi r10, r10, 0x0100
734 mtspr SPRN_MD_CTR, r10
735#endif
736 mfspr r9, 638 /* Get current IMMR */
737 andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */
738
739 mr r8, r9 /* Create vaddr for TLB */
740 ori r8, r8, MD_EVALID /* Mark it valid */
741 mtspr SPRN_MD_EPN, r8
742 li r8, MD_PS8MEG /* Set 8M byte page */
743 ori r8, r8, MD_SVALID /* Make it valid */
744 mtspr SPRN_MD_TWC, r8
745 mr r8, r9 /* Create paddr for TLB */
746 ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
747 mtspr SPRN_MD_RPN, r8
748
749#ifdef CONFIG_PIN_TLB
750 /* Map two more 8M kernel data pages.
751 */
752 addi r10, r10, 0x0100
753 mtspr SPRN_MD_CTR, r10
754
755 lis r8, KERNELBASE@h /* Create vaddr for TLB */
756 addis r8, r8, 0x0080 /* Add 8M */
757 ori r8, r8, MI_EVALID /* Mark it valid */
758 mtspr SPRN_MD_EPN, r8
759 li r9, MI_PS8MEG /* Set 8M byte page */
760 ori r9, r9, MI_SVALID /* Make it valid */
761 mtspr SPRN_MD_TWC, r9
762 li r11, MI_BOOTINIT /* Create RPN for address 0 */
763 addis r11, r11, 0x0080 /* Add 8M */
ccf0d68e 764 mtspr SPRN_MD_RPN, r11
14cf11af
PM		 765
766 addis r8, r8, 0x0080 /* Add 8M */
767 mtspr SPRN_MD_EPN, r8
768 mtspr SPRN_MD_TWC, r9
769 addis r11, r11, 0x0080 /* Add 8M */
ccf0d68e 770 mtspr SPRN_MD_RPN, r11
14cf11af
PM		 771#endif
772
773 /* Since the cache is enabled according to the information we
774 * just loaded into the TLB, invalidate and enable the caches here.
775 * We should probably check/set other modes....later.
776 */
777 lis r8, IDC_INVALL@h
778 mtspr SPRN_IC_CST, r8
779 mtspr SPRN_DC_CST, r8
780 lis r8, IDC_ENABLE@h
781 mtspr SPRN_IC_CST, r8
782#ifdef CONFIG_8xx_COPYBACK
783 mtspr SPRN_DC_CST, r8
784#else
785 /* For a debug option, I left this here to easily enable
786 * the write through cache mode
787 */
788 lis r8, DC_SFWT@h
789 mtspr SPRN_DC_CST, r8
790 lis r8, IDC_ENABLE@h
791 mtspr SPRN_DC_CST, r8
792#endif
793 blr
794
795
796/*
797 * Set up to use a given MMU context.
798 * r3 is context number, r4 is PGD pointer.
799 *
800 * We place the physical address of the new task page directory loaded
801 * into the MMU base register, and set the ASID compare register with
802 * the new "context."
803 */
804_GLOBAL(set_context)
805
806#ifdef CONFIG_BDI_SWITCH
807 /* Context switch the PTE pointer for the Abatron BDI2000.
808 * The PGDIR is passed as second argument.
809 */
810 lis r5, KERNELBASE@h
811 lwz r5, 0xf0(r5)
812 stw r4, 0x4(r5)
813#endif
814
815#ifdef CONFIG_8xx_CPU6
816 lis r6, cpu6_errata_word@h
817 ori r6, r6, cpu6_errata_word@l
818 tophys (r4, r4)
819 li r7, 0x3980
820 stw r7, 12(r6)
821 lwz r7, 12(r6)
822 mtspr SPRN_M_TWB, r4 /* Update MMU base address */
823 li r7, 0x3380
824 stw r7, 12(r6)
825 lwz r7, 12(r6)
826 mtspr SPRN_M_CASID, r3 /* Update context */
827#else
828 mtspr SPRN_M_CASID,r3 /* Update context */
829 tophys (r4, r4)
830 mtspr SPRN_M_TWB, r4 /* and pgd */
831#endif
832 SYNC
833 blr
834
835#ifdef CONFIG_8xx_CPU6
836/* It's here because it is unique to the 8xx.
837 * It is important we get called with interrupts disabled. I used to
838 * do that, but it appears that all code that calls this already had
839 * interrupt disabled.
840 */
841 .globl set_dec_cpu6
842set_dec_cpu6:
843 lis r7, cpu6_errata_word@h
844 ori r7, r7, cpu6_errata_word@l
845 li r4, 0x2c00
846 stw r4, 8(r7)
847 lwz r4, 8(r7)
848 mtspr 22, r3 /* Update Decrementer */
849 SYNC
850 blr
851#endif
852
853/*
854 * We put a few things here that have to be page-aligned.
855 * This stuff goes at the beginning of the data segment,
856 * which is page-aligned.
857 */
858 .data
859 .globl sdata
860sdata:
861 .globl empty_zero_page
862empty_zero_page:
863 .space 4096
864
865 .globl swapper_pg_dir
866swapper_pg_dir:
867 .space 4096
868
14cf11af
PM		 869/* Room for two PTE table poiners, usually the kernel and current user
870 * pointer to their respective root page table (pgdir).
871 */
872abatron_pteptrs:
873 .space 8
874
875#ifdef CONFIG_8xx_CPU6
876 .globl cpu6_errata_word
877cpu6_errata_word:
878 .space 16
879#endif
880
kernel source for telekom puls (alcatel/mediatek)