Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / ia64 / kernel / smpboot.c
CommitLineData
1da177e4
LT
1/*
2 * SMP boot-related support
3 *
82975115 4 * Copyright (C) 1998-2003, 2005 Hewlett-Packard Co
1da177e4 5 * David Mosberger-Tang <davidm@hpl.hp.com>
e927ecb0
SS
6 * Copyright (C) 2001, 2004-2005 Intel Corp
7 * Rohit Seth <rohit.seth@intel.com>
8 * Suresh Siddha <suresh.b.siddha@intel.com>
9 * Gordon Jin <gordon.jin@intel.com>
10 * Ashok Raj <ashok.raj@intel.com>
1da177e4
LT
11 *
12 * 01/05/16 Rohit Seth <rohit.seth@intel.com> Moved SMP booting functions from smp.c to here.
13 * 01/04/27 David Mosberger <davidm@hpl.hp.com> Added ITC synching code.
14 * 02/07/31 David Mosberger <davidm@hpl.hp.com> Switch over to hotplug-CPU boot-sequence.
15 * smp_boot_cpus()/smp_commence() is replaced by
16 * smp_prepare_cpus()/__cpu_up()/smp_cpus_done().
b8d8b883 17 * 04/06/21 Ashok Raj <ashok.raj@intel.com> Added CPU Hotplug Support
e927ecb0
SS
18 * 04/12/26 Jin Gordon <gordon.jin@intel.com>
19 * 04/12/26 Rohit Seth <rohit.seth@intel.com>
20 * Add multi-threading and multi-core detection
21 * 05/01/30 Suresh Siddha <suresh.b.siddha@intel.com>
22 * Setup cpu_sibling_map and cpu_core_map
1da177e4 23 */
1da177e4
LT
24
25#include <linux/module.h>
26#include <linux/acpi.h>
27#include <linux/bootmem.h>
28#include <linux/cpu.h>
29#include <linux/delay.h>
30#include <linux/init.h>
31#include <linux/interrupt.h>
32#include <linux/irq.h>
33#include <linux/kernel.h>
34#include <linux/kernel_stat.h>
35#include <linux/mm.h>
36#include <linux/notifier.h>
37#include <linux/smp.h>
1da177e4
LT
38#include <linux/spinlock.h>
39#include <linux/efi.h>
40#include <linux/percpu.h>
41#include <linux/bitops.h>
42
43#include <asm/atomic.h>
44#include <asm/cache.h>
45#include <asm/current.h>
46#include <asm/delay.h>
47#include <asm/ia32.h>
48#include <asm/io.h>
49#include <asm/irq.h>
50#include <asm/machvec.h>
51#include <asm/mca.h>
52#include <asm/page.h>
53#include <asm/pgalloc.h>
54#include <asm/pgtable.h>
55#include <asm/processor.h>
56#include <asm/ptrace.h>
57#include <asm/sal.h>
58#include <asm/system.h>
59#include <asm/tlbflush.h>
60#include <asm/unistd.h>
61
62#define SMP_DEBUG 0
63
64#if SMP_DEBUG
65#define Dprintk(x...) printk(x)
66#else
67#define Dprintk(x...)
68#endif
69
b8d8b883 70#ifdef CONFIG_HOTPLUG_CPU
ff741906
AR
71#ifdef CONFIG_PERMIT_BSP_REMOVE
72#define bsp_remove_ok 1
73#else
74#define bsp_remove_ok 0
75#endif
76
b8d8b883
AR
77/*
78 * Store all idle threads, this can be reused instead of creating
79 * a new thread. Also avoids complicated thread destroy functionality
80 * for idle threads.
81 */
82struct task_struct *idle_thread_array[NR_CPUS];
83
84/*
85 * Global array allocated for NR_CPUS at boot time
86 */
87struct sal_to_os_boot sal_boot_rendez_state[NR_CPUS];
88
89/*
90 * start_ap in head.S uses this to store current booting cpu
91 * info.
92 */
93struct sal_to_os_boot *sal_state_for_booting_cpu = &sal_boot_rendez_state[0];
94
95#define set_brendez_area(x) (sal_state_for_booting_cpu = &sal_boot_rendez_state[(x)]);
96
97#define get_idle_for_cpu(x) (idle_thread_array[(x)])
98#define set_idle_for_cpu(x,p) (idle_thread_array[(x)] = (p))
99
100#else
101
102#define get_idle_for_cpu(x) (NULL)
103#define set_idle_for_cpu(x,p)
104#define set_brendez_area(x)
105#endif
106
1da177e4
LT
107
108/*
109 * ITC synchronization related stuff:
110 */
ff741906 111#define MASTER (0)
1da177e4
LT
112#define SLAVE (SMP_CACHE_BYTES/8)
113
114#define NUM_ROUNDS 64 /* magic value */
115#define NUM_ITERS 5 /* likewise */
116
117static DEFINE_SPINLOCK(itc_sync_lock);
118static volatile unsigned long go[SLAVE + 1];
119
120#define DEBUG_ITC_SYNC 0
121
122extern void __devinit calibrate_delay (void);
123extern void start_ap (void);
124extern unsigned long ia64_iobase;
125
36c8b586 126struct task_struct *task_for_booting_cpu;
1da177e4
LT
127
128/*
129 * State for each CPU
130 */
131DEFINE_PER_CPU(int, cpu_state);
132
133/* Bitmasks of currently online, and possible CPUs */
134cpumask_t cpu_online_map;
135EXPORT_SYMBOL(cpu_online_map);
69aa234b 136cpumask_t cpu_possible_map = CPU_MASK_NONE;
1da177e4
LT
137EXPORT_SYMBOL(cpu_possible_map);
138
e927ecb0
SS
139cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
140cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
141int smp_num_siblings = 1;
142int smp_num_cpucores = 1;
143
1da177e4
LT
144/* which logical CPU number maps to which CPU (physical APIC ID) */
145volatile int ia64_cpu_to_sapicid[NR_CPUS];
146EXPORT_SYMBOL(ia64_cpu_to_sapicid);
147
148static volatile cpumask_t cpu_callin_map;
149
150struct smp_boot_data smp_boot_data __initdata;
151
152unsigned long ap_wakeup_vector = -1; /* External Int use to wakeup APs */
153
154char __initdata no_int_routing;
155
156unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */
157
ff741906
AR
158#ifdef CONFIG_FORCE_CPEI_RETARGET
159#define CPEI_OVERRIDE_DEFAULT (1)
160#else
161#define CPEI_OVERRIDE_DEFAULT (0)
162#endif
163
164unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT;
165
166static int __init
167cmdl_force_cpei(char *str)
168{
169 int value=0;
170
171 get_option (&str, &value);
172 force_cpei_retarget = value;
173
174 return 1;
175}
176
177__setup("force_cpei=", cmdl_force_cpei);
178
1da177e4
LT
179static int __init
180nointroute (char *str)
181{
182 no_int_routing = 1;
183 printk ("no_int_routing on\n");
184 return 1;
185}
186
187__setup("nointroute", nointroute);
188
ff741906
AR
189static void fix_b0_for_bsp(void)
190{
191#ifdef CONFIG_HOTPLUG_CPU
192 int cpuid;
193 static int fix_bsp_b0 = 1;
194
195 cpuid = smp_processor_id();
196
197 /*
198 * Cache the b0 value on the first AP that comes up
199 */
200 if (!(fix_bsp_b0 && cpuid))
201 return;
202
203 sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0];
204 printk ("Fixed BSP b0 value from CPU %d\n", cpuid);
205
206 fix_bsp_b0 = 0;
207#endif
208}
209
1da177e4
LT
210void
211sync_master (void *arg)
212{
213 unsigned long flags, i;
214
215 go[MASTER] = 0;
216
217 local_irq_save(flags);
218 {
219 for (i = 0; i < NUM_ROUNDS*NUM_ITERS; ++i) {
82975115
DMT
220 while (!go[MASTER])
221 cpu_relax();
1da177e4
LT
222 go[MASTER] = 0;
223 go[SLAVE] = ia64_get_itc();
224 }
225 }
226 local_irq_restore(flags);
227}
228
229/*
230 * Return the number of cycles by which our itc differs from the itc on the master
231 * (time-keeper) CPU. A positive number indicates our itc is ahead of the master,
232 * negative that it is behind.
233 */
234static inline long
235get_delta (long *rt, long *master)
236{
237 unsigned long best_t0 = 0, best_t1 = ~0UL, best_tm = 0;
238 unsigned long tcenter, t0, t1, tm;
239 long i;
240
241 for (i = 0; i < NUM_ITERS; ++i) {
242 t0 = ia64_get_itc();
243 go[MASTER] = 1;
82975115
DMT
244 while (!(tm = go[SLAVE]))
245 cpu_relax();
1da177e4
LT
246 go[SLAVE] = 0;
247 t1 = ia64_get_itc();
248
249 if (t1 - t0 < best_t1 - best_t0)
250 best_t0 = t0, best_t1 = t1, best_tm = tm;
251 }
252
253 *rt = best_t1 - best_t0;
254 *master = best_tm - best_t0;
255
256 /* average best_t0 and best_t1 without overflow: */
257 tcenter = (best_t0/2 + best_t1/2);
258 if (best_t0 % 2 + best_t1 % 2 == 2)
259 ++tcenter;
260 return tcenter - best_tm;
261}
262
263/*
264 * Synchronize ar.itc of the current (slave) CPU with the ar.itc of the MASTER CPU
265 * (normally the time-keeper CPU). We use a closed loop to eliminate the possibility of
266 * unaccounted-for errors (such as getting a machine check in the middle of a calibration
267 * step). The basic idea is for the slave to ask the master what itc value it has and to
268 * read its own itc before and after the master responds. Each iteration gives us three
269 * timestamps:
270 *
271 * slave master
272 *
273 * t0 ---\
274 * ---\
275 * --->
276 * tm
277 * /---
278 * /---
279 * t1 <---
280 *
281 *
282 * The goal is to adjust the slave's ar.itc such that tm falls exactly half-way between t0
283 * and t1. If we achieve this, the clocks are synchronized provided the interconnect
284 * between the slave and the master is symmetric. Even if the interconnect were
285 * asymmetric, we would still know that the synchronization error is smaller than the
286 * roundtrip latency (t0 - t1).
287 *
288 * When the interconnect is quiet and symmetric, this lets us synchronize the itc to
289 * within one or two cycles. However, we can only *guarantee* that the synchronization is
290 * accurate to within a round-trip time, which is typically in the range of several
291 * hundred cycles (e.g., ~500 cycles). In practice, this means that the itc's are usually
292 * almost perfectly synchronized, but we shouldn't assume that the accuracy is much better
293 * than half a micro second or so.
294 */
295void
296ia64_sync_itc (unsigned int master)
297{
298 long i, delta, adj, adjust_latency = 0, done = 0;
299 unsigned long flags, rt, master_time_stamp, bound;
300#if DEBUG_ITC_SYNC
301 struct {
302 long rt; /* roundtrip time */
303 long master; /* master's timestamp */
304 long diff; /* difference between midpoint and master's timestamp */
305 long lat; /* estimate of itc adjustment latency */
306 } t[NUM_ROUNDS];
307#endif
308
309 /*
310 * Make sure local timer ticks are disabled while we sync. If
311 * they were enabled, we'd have to worry about nasty issues
312 * like setting the ITC ahead of (or a long time before) the
313 * next scheduled tick.
314 */
315 BUG_ON((ia64_get_itv() & (1 << 16)) == 0);
316
317 go[MASTER] = 1;
318
319 if (smp_call_function_single(master, sync_master, NULL, 1, 0) < 0) {
320 printk(KERN_ERR "sync_itc: failed to get attention of CPU %u!\n", master);
321 return;
322 }
323
82975115
DMT
324 while (go[MASTER])
325 cpu_relax(); /* wait for master to be ready */
1da177e4
LT
326
327 spin_lock_irqsave(&itc_sync_lock, flags);
328 {
329 for (i = 0; i < NUM_ROUNDS; ++i) {
330 delta = get_delta(&rt, &master_time_stamp);
331 if (delta == 0) {
332 done = 1; /* let's lock on to this... */
333 bound = rt;
334 }
335
336 if (!done) {
337 if (i > 0) {
338 adjust_latency += -delta;
339 adj = -delta + adjust_latency/4;
340 } else
341 adj = -delta;
342
343 ia64_set_itc(ia64_get_itc() + adj);
344 }
345#if DEBUG_ITC_SYNC
346 t[i].rt = rt;
347 t[i].master = master_time_stamp;
348 t[i].diff = delta;
349 t[i].lat = adjust_latency/4;
350#endif
351 }
352 }
353 spin_unlock_irqrestore(&itc_sync_lock, flags);
354
355#if DEBUG_ITC_SYNC
356 for (i = 0; i < NUM_ROUNDS; ++i)
357 printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n",
358 t[i].rt, t[i].master, t[i].diff, t[i].lat);
359#endif
360
361 printk(KERN_INFO "CPU %d: synchronized ITC with CPU %u (last diff %ld cycles, "
362 "maxerr %lu cycles)\n", smp_processor_id(), master, delta, rt);
363}
364
365/*
366 * Ideally sets up per-cpu profiling hooks. Doesn't do much now...
367 */
368static inline void __devinit
369smp_setup_percpu_timer (void)
370{
371}
372
373static void __devinit
374smp_callin (void)
375{
ff741906 376 int cpuid, phys_id, itc_master;
ead6caae 377 struct cpuinfo_ia64 *last_cpuinfo, *this_cpuinfo;
1da177e4 378 extern void ia64_init_itm(void);
ff741906 379 extern volatile int time_keeper_id;
1da177e4
LT
380
381#ifdef CONFIG_PERFMON
382 extern void pfm_init_percpu(void);
383#endif
384
385 cpuid = smp_processor_id();
386 phys_id = hard_smp_processor_id();
ff741906 387 itc_master = time_keeper_id;
1da177e4
LT
388
389 if (cpu_online(cpuid)) {
390 printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n",
391 phys_id, cpuid);
392 BUG();
393 }
394
ff741906
AR
395 fix_b0_for_bsp();
396
1da177e4
LT
397 lock_ipi_calllock();
398 cpu_set(cpuid, cpu_online_map);
399 unlock_ipi_calllock();
a9fa06c2 400 per_cpu(cpu_state, cpuid) = CPU_ONLINE;
1da177e4
LT
401
402 smp_setup_percpu_timer();
403
404 ia64_mca_cmc_vector_setup(); /* Setup vector on AP */
405
406#ifdef CONFIG_PERFMON
407 pfm_init_percpu();
408#endif
409
410 local_irq_enable();
411
412 if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) {
413 /*
414 * Synchronize the ITC with the BP. Need to do this after irqs are
415 * enabled because ia64_sync_itc() calls smp_call_function_single(), which
416 * calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls
417 * local_bh_enable(), which bugs out if irqs are not enabled...
418 */
ff741906
AR
419 Dprintk("Going to syncup ITC with ITC Master.\n");
420 ia64_sync_itc(itc_master);
1da177e4
LT
421 }
422
423 /*
424 * Get our bogomips.
425 */
426 ia64_init_itm();
ead6caae
JS
427
428 /*
429 * Delay calibration can be skipped if new processor is identical to the
430 * previous processor.
431 */
432 last_cpuinfo = cpu_data(cpuid - 1);
433 this_cpuinfo = local_cpu_data;
434 if (last_cpuinfo->itc_freq != this_cpuinfo->itc_freq ||
435 last_cpuinfo->proc_freq != this_cpuinfo->proc_freq ||
436 last_cpuinfo->features != this_cpuinfo->features ||
437 last_cpuinfo->revision != this_cpuinfo->revision ||
438 last_cpuinfo->family != this_cpuinfo->family ||
439 last_cpuinfo->archrev != this_cpuinfo->archrev ||
440 last_cpuinfo->model != this_cpuinfo->model)
441 calibrate_delay();
1da177e4
LT
442 local_cpu_data->loops_per_jiffy = loops_per_jiffy;
443
444#ifdef CONFIG_IA32_SUPPORT
445 ia32_gdt_init();
446#endif
447
448 /*
449 * Allow the master to continue.
450 */
451 cpu_set(cpuid, cpu_callin_map);
452 Dprintk("Stack on CPU %d at about %p\n",cpuid, &cpuid);
453}
454
455
456/*
457 * Activate a secondary processor. head.S calls this.
458 */
459int __devinit
460start_secondary (void *unused)
461{
462 /* Early console may use I/O ports */
463 ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
1da177e4
LT
464 Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
465 efi_map_pal_code();
466 cpu_init();
5bfb5d69 467 preempt_disable();
1da177e4
LT
468 smp_callin();
469
470 cpu_idle();
471 return 0;
472}
473
474struct pt_regs * __devinit idle_regs(struct pt_regs *regs)
475{
476 return NULL;
477}
478
479struct create_idle {
6d5aefb8 480 struct work_struct work;
1da177e4
LT
481 struct task_struct *idle;
482 struct completion done;
483 int cpu;
484};
485
486void
6d5aefb8 487do_fork_idle(struct work_struct *work)
1da177e4 488{
6d5aefb8
DH
489 struct create_idle *c_idle =
490 container_of(work, struct create_idle, work);
1da177e4
LT
491
492 c_idle->idle = fork_idle(c_idle->cpu);
493 complete(&c_idle->done);
494}
495
496static int __devinit
497do_boot_cpu (int sapicid, int cpu)
498{
499 int timeout;
500 struct create_idle c_idle = {
6d5aefb8 501 .work = __WORK_INITIALIZER(c_idle.work, do_fork_idle),
1da177e4
LT
502 .cpu = cpu,
503 .done = COMPLETION_INITIALIZER(c_idle.done),
504 };
b8d8b883
AR
505
506 c_idle.idle = get_idle_for_cpu(cpu);
507 if (c_idle.idle) {
508 init_idle(c_idle.idle, cpu);
509 goto do_rest;
510 }
511
1da177e4
LT
512 /*
513 * We can't use kernel_thread since we must avoid to reschedule the child.
514 */
515 if (!keventd_up() || current_is_keventd())
6d5aefb8 516 c_idle.work.func(&c_idle.work);
1da177e4 517 else {
6d5aefb8 518 schedule_work(&c_idle.work);
1da177e4
LT
519 wait_for_completion(&c_idle.done);
520 }
521
522 if (IS_ERR(c_idle.idle))
523 panic("failed fork for CPU %d", cpu);
b8d8b883
AR
524
525 set_idle_for_cpu(cpu, c_idle.idle);
526
527do_rest:
1da177e4
LT
528 task_for_booting_cpu = c_idle.idle;
529
530 Dprintk("Sending wakeup vector %lu to AP 0x%x/0x%x.\n", ap_wakeup_vector, cpu, sapicid);
531
b8d8b883 532 set_brendez_area(cpu);
1da177e4
LT
533 platform_send_ipi(cpu, ap_wakeup_vector, IA64_IPI_DM_INT, 0);
534
535 /*
536 * Wait 10s total for the AP to start
537 */
538 Dprintk("Waiting on callin_map ...");
539 for (timeout = 0; timeout < 100000; timeout++) {
540 if (cpu_isset(cpu, cpu_callin_map))
541 break; /* It has booted */
542 udelay(100);
543 }
544 Dprintk("\n");
545
546 if (!cpu_isset(cpu, cpu_callin_map)) {
547 printk(KERN_ERR "Processor 0x%x/0x%x is stuck.\n", cpu, sapicid);
548 ia64_cpu_to_sapicid[cpu] = -1;
549 cpu_clear(cpu, cpu_online_map); /* was set in smp_callin() */
550 return -EINVAL;
551 }
552 return 0;
553}
554
555static int __init
556decay (char *str)
557{
558 int ticks;
559 get_option (&str, &ticks);
560 return 1;
561}
562
563__setup("decay=", decay);
564
565/*
566 * Initialize the logical CPU number to SAPICID mapping
567 */
568void __init
569smp_build_cpu_map (void)
570{
571 int sapicid, cpu, i;
572 int boot_cpu_id = hard_smp_processor_id();
573
574 for (cpu = 0; cpu < NR_CPUS; cpu++) {
575 ia64_cpu_to_sapicid[cpu] = -1;
1da177e4
LT
576 }
577
578 ia64_cpu_to_sapicid[0] = boot_cpu_id;
579 cpus_clear(cpu_present_map);
580 cpu_set(0, cpu_present_map);
581 cpu_set(0, cpu_possible_map);
582 for (cpu = 1, i = 0; i < smp_boot_data.cpu_count; i++) {
583 sapicid = smp_boot_data.cpu_phys_id[i];
584 if (sapicid == boot_cpu_id)
585 continue;
586 cpu_set(cpu, cpu_present_map);
587 cpu_set(cpu, cpu_possible_map);
588 ia64_cpu_to_sapicid[cpu] = sapicid;
589 cpu++;
590 }
591}
592
1da177e4
LT
593/*
594 * Cycle through the APs sending Wakeup IPIs to boot each.
595 */
596void __init
597smp_prepare_cpus (unsigned int max_cpus)
598{
599 int boot_cpu_id = hard_smp_processor_id();
600
601 /*
602 * Initialize the per-CPU profiling counter/multiplier
603 */
604
605 smp_setup_percpu_timer();
606
607 /*
608 * We have the boot CPU online for sure.
609 */
610 cpu_set(0, cpu_online_map);
611 cpu_set(0, cpu_callin_map);
612
613 local_cpu_data->loops_per_jiffy = loops_per_jiffy;
614 ia64_cpu_to_sapicid[0] = boot_cpu_id;
615
616 printk(KERN_INFO "Boot processor id 0x%x/0x%x\n", 0, boot_cpu_id);
617
618 current_thread_info()->cpu = 0;
619
620 /*
621 * If SMP should be disabled, then really disable it!
622 */
623 if (!max_cpus) {
624 printk(KERN_INFO "SMP mode deactivated.\n");
625 cpus_clear(cpu_online_map);
626 cpus_clear(cpu_present_map);
627 cpus_clear(cpu_possible_map);
628 cpu_set(0, cpu_online_map);
629 cpu_set(0, cpu_present_map);
630 cpu_set(0, cpu_possible_map);
631 return;
632 }
633}
634
635void __devinit smp_prepare_boot_cpu(void)
636{
637 cpu_set(smp_processor_id(), cpu_online_map);
638 cpu_set(smp_processor_id(), cpu_callin_map);
a9fa06c2 639 per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
1da177e4
LT
640}
641
642#ifdef CONFIG_HOTPLUG_CPU
e927ecb0
SS
643static inline void
644clear_cpu_sibling_map(int cpu)
645{
646 int i;
647
648 for_each_cpu_mask(i, cpu_sibling_map[cpu])
649 cpu_clear(cpu, cpu_sibling_map[i]);
650 for_each_cpu_mask(i, cpu_core_map[cpu])
651 cpu_clear(cpu, cpu_core_map[i]);
652
653 cpu_sibling_map[cpu] = cpu_core_map[cpu] = CPU_MASK_NONE;
654}
655
656static void
657remove_siblinginfo(int cpu)
658{
659 int last = 0;
660
661 if (cpu_data(cpu)->threads_per_core == 1 &&
662 cpu_data(cpu)->cores_per_socket == 1) {
663 cpu_clear(cpu, cpu_core_map[cpu]);
664 cpu_clear(cpu, cpu_sibling_map[cpu]);
665 return;
666 }
667
668 last = (cpus_weight(cpu_core_map[cpu]) == 1 ? 1 : 0);
669
670 /* remove it from all sibling map's */
671 clear_cpu_sibling_map(cpu);
e927ecb0
SS
672}
673
1da177e4 674extern void fixup_irqs(void);
ff741906
AR
675
676int migrate_platform_irqs(unsigned int cpu)
677{
678 int new_cpei_cpu;
679 irq_desc_t *desc = NULL;
680 cpumask_t mask;
681 int retval = 0;
682
683 /*
684 * dont permit CPEI target to removed.
685 */
686 if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) {
687 printk ("CPU (%d) is CPEI Target\n", cpu);
688 if (can_cpei_retarget()) {
689 /*
690 * Now re-target the CPEI to a different processor
691 */
692 new_cpei_cpu = any_online_cpu(cpu_online_map);
693 mask = cpumask_of_cpu(new_cpei_cpu);
694 set_cpei_target_cpu(new_cpei_cpu);
a8553acd 695 desc = irq_desc + ia64_cpe_irq;
ff741906 696 /*
72fdbdce 697 * Switch for now, immediately, we need to do fake intr
ff741906
AR
698 * as other interrupts, but need to study CPEI behaviour with
699 * polling before making changes.
700 */
701 if (desc) {
d1bef4ed
IM
702 desc->chip->disable(ia64_cpe_irq);
703 desc->chip->set_affinity(ia64_cpe_irq, mask);
704 desc->chip->enable(ia64_cpe_irq);
ff741906
AR
705 printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu);
706 }
707 }
708 if (!desc) {
709 printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu);
710 retval = -EBUSY;
711 }
712 }
713 return retval;
714}
715
1da177e4 716/* must be called with cpucontrol mutex held */
1da177e4
LT
717int __cpu_disable(void)
718{
719 int cpu = smp_processor_id();
720
721 /*
722 * dont permit boot processor for now
723 */
ff741906
AR
724 if (cpu == 0 && !bsp_remove_ok) {
725 printk ("Your platform does not support removal of BSP\n");
726 return (-EBUSY);
727 }
728
729 cpu_clear(cpu, cpu_online_map);
730
731 if (migrate_platform_irqs(cpu)) {
732 cpu_set(cpu, cpu_online_map);
733 return (-EBUSY);
734 }
1da177e4 735
e927ecb0 736 remove_siblinginfo(cpu);
f3705136 737 cpu_clear(cpu, cpu_online_map);
1da177e4
LT
738 fixup_irqs();
739 local_flush_tlb_all();
b8d8b883 740 cpu_clear(cpu, cpu_callin_map);
1da177e4
LT
741 return 0;
742}
743
744void __cpu_die(unsigned int cpu)
745{
746 unsigned int i;
747
748 for (i = 0; i < 100; i++) {
749 /* They ack this in play_dead by setting CPU_DEAD */
750 if (per_cpu(cpu_state, cpu) == CPU_DEAD)
751 {
b8d8b883 752 printk ("CPU %d is now offline\n", cpu);
1da177e4
LT
753 return;
754 }
755 msleep(100);
756 }
757 printk(KERN_ERR "CPU %u didn't die...\n", cpu);
758}
759#else /* !CONFIG_HOTPLUG_CPU */
1da177e4
LT
760int __cpu_disable(void)
761{
762 return -ENOSYS;
763}
764
765void __cpu_die(unsigned int cpu)
766{
767 /* We said "no" in __cpu_disable */
768 BUG();
769}
770#endif /* CONFIG_HOTPLUG_CPU */
771
772void
773smp_cpus_done (unsigned int dummy)
774{
775 int cpu;
776 unsigned long bogosum = 0;
777
778 /*
779 * Allow the user to impress friends.
780 */
781
dc565b52 782 for_each_online_cpu(cpu) {
783 bogosum += cpu_data(cpu)->loops_per_jiffy;
784 }
1da177e4
LT
785
786 printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
787 (int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
788}
789
e927ecb0
SS
790static inline void __devinit
791set_cpu_sibling_map(int cpu)
792{
793 int i;
794
795 for_each_online_cpu(i) {
796 if ((cpu_data(cpu)->socket_id == cpu_data(i)->socket_id)) {
797 cpu_set(i, cpu_core_map[cpu]);
798 cpu_set(cpu, cpu_core_map[i]);
799 if (cpu_data(cpu)->core_id == cpu_data(i)->core_id) {
800 cpu_set(i, cpu_sibling_map[cpu]);
801 cpu_set(cpu, cpu_sibling_map[i]);
802 }
803 }
804 }
805}
806
1da177e4
LT
807int __devinit
808__cpu_up (unsigned int cpu)
809{
810 int ret;
811 int sapicid;
812
813 sapicid = ia64_cpu_to_sapicid[cpu];
814 if (sapicid == -1)
815 return -EINVAL;
816
817 /*
b8d8b883
AR
818 * Already booted cpu? not valid anymore since we dont
819 * do idle loop tightspin anymore.
1da177e4
LT
820 */
821 if (cpu_isset(cpu, cpu_callin_map))
b8d8b883
AR
822 return -EINVAL;
823
a9fa06c2 824 per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
1da177e4
LT
825 /* Processor goes to start_secondary(), sets online flag */
826 ret = do_boot_cpu(sapicid, cpu);
827 if (ret < 0)
828 return ret;
829
e927ecb0
SS
830 if (cpu_data(cpu)->threads_per_core == 1 &&
831 cpu_data(cpu)->cores_per_socket == 1) {
832 cpu_set(cpu, cpu_sibling_map[cpu]);
833 cpu_set(cpu, cpu_core_map[cpu]);
834 return 0;
835 }
836
837 set_cpu_sibling_map(cpu);
838
1da177e4
LT
839 return 0;
840}
841
842/*
72fdbdce 843 * Assume that CPUs have been discovered by some platform-dependent interface. For
1da177e4
LT
844 * SoftSDV/Lion, that would be ACPI.
845 *
846 * Setup of the IPI irq handler is done in irq.c:init_IRQ_SMP().
847 */
848void __init
849init_smp_config(void)
850{
851 struct fptr {
852 unsigned long fp;
853 unsigned long gp;
854 } *ap_startup;
855 long sal_ret;
856
72fdbdce 857 /* Tell SAL where to drop the APs. */
1da177e4
LT
858 ap_startup = (struct fptr *) start_ap;
859 sal_ret = ia64_sal_set_vectors(SAL_VECTOR_OS_BOOT_RENDEZ,
860 ia64_tpa(ap_startup->fp), ia64_tpa(ap_startup->gp), 0, 0, 0, 0);
861 if (sal_ret < 0)
862 printk(KERN_ERR "SMP: Can't set SAL AP Boot Rendezvous: %s\n",
863 ia64_sal_strerror(sal_ret));
864}
865
e927ecb0
SS
866/*
867 * identify_siblings(cpu) gets called from identify_cpu. This populates the
868 * information related to logical execution units in per_cpu_data structure.
869 */
870void __devinit
871identify_siblings(struct cpuinfo_ia64 *c)
872{
873 s64 status;
874 u16 pltid;
e927ecb0
SS
875 pal_logical_to_physical_t info;
876
877 if (smp_num_cpucores == 1 && smp_num_siblings == 1)
878 return;
879
4129a953 880 if ((status = ia64_pal_logical_to_phys(-1, &info)) != PAL_STATUS_SUCCESS) {
e927ecb0
SS
881 printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n",
882 status);
883 return;
884 }
885 if ((status = ia64_sal_physical_id_info(&pltid)) != PAL_STATUS_SUCCESS) {
886 printk(KERN_ERR "ia64_sal_pltid failed with %ld\n", status);
887 return;
888 }
e927ecb0
SS
889
890 c->socket_id = (pltid << 8) | info.overview_ppid;
891 c->cores_per_socket = info.overview_cpp;
892 c->threads_per_core = info.overview_tpc;
4129a953 893 c->num_log = info.overview_num_log;
e927ecb0 894
4129a953
FY
895 c->core_id = info.log1_cid;
896 c->thread_id = info.log1_tid;
e927ecb0 897}
dd562c05
SE
898
899/*
900 * returns non zero, if multi-threading is enabled
901 * on at least one physical package. Due to hotplug cpu
902 * and (maxcpus=), all threads may not necessarily be enabled
903 * even though the processor supports multi-threading.
904 */
905int is_multithreading_enabled(void)
906{
907 int i, j;
908
909 for_each_present_cpu(i) {
910 for_each_present_cpu(j) {
911 if (j == i)
912 continue;
913 if ((cpu_data(j)->socket_id == cpu_data(i)->socket_id)) {
914 if (cpu_data(j)->core_id == cpu_data(i)->core_id)
915 return 1;
916 }
917 }
918 }
919 return 0;
920}
921EXPORT_SYMBOL_GPL(is_multithreading_enabled);