Commit | Line | Data |
---|---|---|
51533b61 | 1 | /* |
e908dfc3 | 2 | * Simple synchronous serial port driver for ETRAX FS and Artpec-3. |
51533b61 MS |
3 | * |
4 | * Copyright (c) 2005 Axis Communications AB | |
5 | * | |
6 | * Author: Mikael Starvik | |
7 | * | |
8 | */ | |
9 | ||
10 | #include <linux/module.h> | |
11 | #include <linux/kernel.h> | |
51533b61 MS |
12 | #include <linux/types.h> |
13 | #include <linux/errno.h> | |
14 | #include <linux/major.h> | |
15 | #include <linux/sched.h> | |
0890b588 | 16 | #include <linux/mutex.h> |
51533b61 MS |
17 | #include <linux/interrupt.h> |
18 | #include <linux/poll.h> | |
19 | #include <linux/init.h> | |
20 | #include <linux/timer.h> | |
21 | #include <linux/spinlock.h> | |
22 | ||
23 | #include <asm/io.h> | |
e908dfc3 JN |
24 | #include <dma.h> |
25 | #include <pinmux.h> | |
26 | #include <hwregs/reg_rdwr.h> | |
27 | #include <hwregs/sser_defs.h> | |
28 | #include <hwregs/dma_defs.h> | |
29 | #include <hwregs/dma.h> | |
30 | #include <hwregs/intr_vect_defs.h> | |
31 | #include <hwregs/intr_vect.h> | |
32 | #include <hwregs/reg_map.h> | |
51533b61 MS |
33 | #include <asm/sync_serial.h> |
34 | ||
e908dfc3 | 35 | |
25985edc | 36 | /* The receiver is a bit tricky because of the continuous stream of data.*/ |
51533b61 MS |
37 | /* */ |
38 | /* Three DMA descriptors are linked together. Each DMA descriptor is */ | |
39 | /* responsible for port->bufchunk of a common buffer. */ | |
40 | /* */ | |
41 | /* +---------------------------------------------+ */ | |
42 | /* | +----------+ +----------+ +----------+ | */ | |
43 | /* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */ | |
44 | /* +----------+ +----------+ +----------+ */ | |
45 | /* | | | */ | |
46 | /* v v v */ | |
47 | /* +-------------------------------------+ */ | |
48 | /* | BUFFER | */ | |
49 | /* +-------------------------------------+ */ | |
50 | /* |<- data_avail ->| */ | |
51 | /* readp writep */ | |
52 | /* */ | |
53 | /* If the application keeps up the pace readp will be right after writep.*/ | |
54 | /* If the application can't keep the pace we have to throw away data. */ | |
55 | /* The idea is that readp should be ready with the data pointed out by */ | |
56 | /* Descr[i] when the DMA has filled in Descr[i+1]. */ | |
57 | /* Otherwise we will discard */ | |
58 | /* the rest of the data pointed out by Descr1 and set readp to the start */ | |
59 | /* of Descr2 */ | |
60 | ||
61 | #define SYNC_SERIAL_MAJOR 125 | |
62 | ||
63 | /* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */ | |
64 | /* words can be handled */ | |
65 | #define IN_BUFFER_SIZE 12288 | |
66 | #define IN_DESCR_SIZE 256 | |
e908dfc3 JN |
67 | #define NBR_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) |
68 | ||
69 | #define OUT_BUFFER_SIZE 1024*8 | |
70 | #define NBR_OUT_DESCR 8 | |
51533b61 MS |
71 | |
72 | #define DEFAULT_FRAME_RATE 0 | |
73 | #define DEFAULT_WORD_RATE 7 | |
74 | ||
75 | /* NOTE: Enabling some debug will likely cause overrun or underrun, | |
76 | * especially if manual mode is use. | |
77 | */ | |
78 | #define DEBUG(x) | |
79 | #define DEBUGREAD(x) | |
80 | #define DEBUGWRITE(x) | |
81 | #define DEBUGPOLL(x) | |
82 | #define DEBUGRXINT(x) | |
83 | #define DEBUGTXINT(x) | |
e908dfc3 JN |
84 | #define DEBUGTRDMA(x) |
85 | #define DEBUGOUTBUF(x) | |
51533b61 MS |
86 | |
87 | typedef struct sync_port | |
88 | { | |
89 | reg_scope_instances regi_sser; | |
90 | reg_scope_instances regi_dmain; | |
91 | reg_scope_instances regi_dmaout; | |
92 | ||
93 | char started; /* 1 if port has been started */ | |
94 | char port_nbr; /* Port 0 or 1 */ | |
95 | char busy; /* 1 if port is busy */ | |
96 | ||
97 | char enabled; /* 1 if port is enabled */ | |
98 | char use_dma; /* 1 if port uses dma */ | |
99 | char tr_running; | |
100 | ||
101 | char init_irqs; | |
102 | int output; | |
103 | int input; | |
104 | ||
e908dfc3 JN |
105 | /* Next byte to be read by application */ |
106 | volatile unsigned char *volatile readp; | |
107 | /* Next byte to be written by etrax */ | |
108 | volatile unsigned char *volatile writep; | |
109 | ||
51533b61 MS |
110 | unsigned int in_buffer_size; |
111 | unsigned int inbufchunk; | |
112 | unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32))); | |
113 | unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32))); | |
114 | unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32))); | |
115 | struct dma_descr_data* next_rx_desc; | |
116 | struct dma_descr_data* prev_rx_desc; | |
e908dfc3 JN |
117 | |
118 | /* Pointer to the first available descriptor in the ring, | |
119 | * unless active_tr_descr == catch_tr_descr and a dma | |
120 | * transfer is active */ | |
121 | struct dma_descr_data *active_tr_descr; | |
122 | ||
123 | /* Pointer to the first allocated descriptor in the ring */ | |
124 | struct dma_descr_data *catch_tr_descr; | |
125 | ||
126 | /* Pointer to the descriptor with the current end-of-list */ | |
127 | struct dma_descr_data *prev_tr_descr; | |
51533b61 MS |
128 | int full; |
129 | ||
e908dfc3 JN |
130 | /* Pointer to the first byte being read by DMA |
131 | * or current position in out_buffer if not using DMA. */ | |
132 | unsigned char *out_rd_ptr; | |
133 | ||
134 | /* Number of bytes currently locked for being read by DMA */ | |
135 | int out_buf_count; | |
136 | ||
137 | dma_descr_data in_descr[NBR_IN_DESCR] __attribute__ ((__aligned__(16))); | |
51533b61 | 138 | dma_descr_context in_context __attribute__ ((__aligned__(32))); |
e908dfc3 JN |
139 | dma_descr_data out_descr[NBR_OUT_DESCR] |
140 | __attribute__ ((__aligned__(16))); | |
51533b61 MS |
141 | dma_descr_context out_context __attribute__ ((__aligned__(32))); |
142 | wait_queue_head_t out_wait_q; | |
143 | wait_queue_head_t in_wait_q; | |
144 | ||
145 | spinlock_t lock; | |
146 | } sync_port; | |
147 | ||
0890b588 | 148 | static DEFINE_MUTEX(sync_serial_mutex); |
51533b61 MS |
149 | static int etrax_sync_serial_init(void); |
150 | static void initialize_port(int portnbr); | |
151 | static inline int sync_data_avail(struct sync_port *port); | |
152 | ||
153 | static int sync_serial_open(struct inode *, struct file*); | |
154 | static int sync_serial_release(struct inode*, struct file*); | |
155 | static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); | |
156 | ||
90276a1a | 157 | static int sync_serial_ioctl(struct file *, |
51533b61 MS |
158 | unsigned int cmd, unsigned long arg); |
159 | static ssize_t sync_serial_write(struct file * file, const char * buf, | |
160 | size_t count, loff_t *ppos); | |
161 | static ssize_t sync_serial_read(struct file *file, char *buf, | |
162 | size_t count, loff_t *ppos); | |
163 | ||
164 | #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ | |
165 | defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ | |
166 | (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ | |
167 | defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) | |
168 | #define SYNC_SER_DMA | |
169 | #endif | |
170 | ||
171 | static void send_word(sync_port* port); | |
e908dfc3 | 172 | static void start_dma_out(struct sync_port *port, const char *data, int count); |
51533b61 MS |
173 | static void start_dma_in(sync_port* port); |
174 | #ifdef SYNC_SER_DMA | |
e908dfc3 JN |
175 | static irqreturn_t tr_interrupt(int irq, void *dev_id); |
176 | static irqreturn_t rx_interrupt(int irq, void *dev_id); | |
51533b61 MS |
177 | #endif |
178 | ||
179 | #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ | |
180 | !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ | |
181 | (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ | |
182 | !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) | |
183 | #define SYNC_SER_MANUAL | |
184 | #endif | |
185 | #ifdef SYNC_SER_MANUAL | |
e908dfc3 JN |
186 | static irqreturn_t manual_interrupt(int irq, void *dev_id); |
187 | #endif | |
188 | ||
189 | #ifdef CONFIG_ETRAXFS /* ETRAX FS */ | |
190 | #define OUT_DMA_NBR 4 | |
191 | #define IN_DMA_NBR 5 | |
192 | #define PINMUX_SSER pinmux_sser0 | |
193 | #define SYNCSER_INST regi_sser0 | |
194 | #define SYNCSER_INTR_VECT SSER0_INTR_VECT | |
195 | #define OUT_DMA_INST regi_dma4 | |
196 | #define IN_DMA_INST regi_dma5 | |
197 | #define DMA_OUT_INTR_VECT DMA4_INTR_VECT | |
198 | #define DMA_IN_INTR_VECT DMA5_INTR_VECT | |
199 | #define REQ_DMA_SYNCSER dma_sser0 | |
200 | #else /* Artpec-3 */ | |
201 | #define OUT_DMA_NBR 6 | |
202 | #define IN_DMA_NBR 7 | |
203 | #define PINMUX_SSER pinmux_sser | |
204 | #define SYNCSER_INST regi_sser | |
205 | #define SYNCSER_INTR_VECT SSER_INTR_VECT | |
206 | #define OUT_DMA_INST regi_dma6 | |
207 | #define IN_DMA_INST regi_dma7 | |
208 | #define DMA_OUT_INTR_VECT DMA6_INTR_VECT | |
209 | #define DMA_IN_INTR_VECT DMA7_INTR_VECT | |
210 | #define REQ_DMA_SYNCSER dma_sser | |
51533b61 MS |
211 | #endif |
212 | ||
213 | /* The ports */ | |
214 | static struct sync_port ports[]= | |
215 | { | |
216 | { | |
e908dfc3 JN |
217 | .regi_sser = SYNCSER_INST, |
218 | .regi_dmaout = OUT_DMA_INST, | |
219 | .regi_dmain = IN_DMA_INST, | |
51533b61 MS |
220 | #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) |
221 | .use_dma = 1, | |
222 | #else | |
223 | .use_dma = 0, | |
224 | #endif | |
e908dfc3 JN |
225 | } |
226 | #ifdef CONFIG_ETRAXFS | |
227 | , | |
228 | ||
51533b61 MS |
229 | { |
230 | .regi_sser = regi_sser1, | |
231 | .regi_dmaout = regi_dma6, | |
232 | .regi_dmain = regi_dma7, | |
233 | #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) | |
234 | .use_dma = 1, | |
235 | #else | |
236 | .use_dma = 0, | |
237 | #endif | |
238 | } | |
e908dfc3 | 239 | #endif |
51533b61 MS |
240 | }; |
241 | ||
e908dfc3 | 242 | #define NBR_PORTS ARRAY_SIZE(ports) |
51533b61 | 243 | |
5dfe4c96 | 244 | static const struct file_operations sync_serial_fops = { |
90276a1a JN |
245 | .owner = THIS_MODULE, |
246 | .write = sync_serial_write, | |
247 | .read = sync_serial_read, | |
248 | .poll = sync_serial_poll, | |
249 | .unlocked_ioctl = sync_serial_ioctl, | |
250 | .open = sync_serial_open, | |
6038f373 AB |
251 | .release = sync_serial_release, |
252 | .llseek = noop_llseek, | |
51533b61 MS |
253 | }; |
254 | ||
255 | static int __init etrax_sync_serial_init(void) | |
256 | { | |
257 | ports[0].enabled = 0; | |
e908dfc3 | 258 | #ifdef CONFIG_ETRAXFS |
51533b61 | 259 | ports[1].enabled = 0; |
e908dfc3 JN |
260 | #endif |
261 | if (register_chrdev(SYNC_SERIAL_MAJOR, "sync serial", | |
262 | &sync_serial_fops) < 0) { | |
263 | printk(KERN_WARNING | |
264 | "Unable to get major for synchronous serial port\n"); | |
51533b61 MS |
265 | return -EBUSY; |
266 | } | |
267 | ||
268 | /* Initialize Ports */ | |
269 | #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) | |
e908dfc3 JN |
270 | if (crisv32_pinmux_alloc_fixed(PINMUX_SSER)) { |
271 | printk(KERN_WARNING | |
272 | "Unable to alloc pins for synchronous serial port 0\n"); | |
51533b61 MS |
273 | return -EIO; |
274 | } | |
275 | ports[0].enabled = 1; | |
276 | initialize_port(0); | |
277 | #endif | |
278 | ||
279 | #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) | |
e908dfc3 JN |
280 | if (crisv32_pinmux_alloc_fixed(pinmux_sser1)) { |
281 | printk(KERN_WARNING | |
282 | "Unable to alloc pins for synchronous serial port 0\n"); | |
51533b61 MS |
283 | return -EIO; |
284 | } | |
285 | ports[1].enabled = 1; | |
286 | initialize_port(1); | |
287 | #endif | |
288 | ||
e908dfc3 JN |
289 | #ifdef CONFIG_ETRAXFS |
290 | printk(KERN_INFO "ETRAX FS synchronous serial port driver\n"); | |
291 | #else | |
292 | printk(KERN_INFO "Artpec-3 synchronous serial port driver\n"); | |
293 | #endif | |
51533b61 MS |
294 | return 0; |
295 | } | |
296 | ||
297 | static void __init initialize_port(int portnbr) | |
298 | { | |
e908dfc3 JN |
299 | int __attribute__((unused)) i; |
300 | struct sync_port *port = &ports[portnbr]; | |
51533b61 MS |
301 | reg_sser_rw_cfg cfg = {0}; |
302 | reg_sser_rw_frm_cfg frm_cfg = {0}; | |
303 | reg_sser_rw_tr_cfg tr_cfg = {0}; | |
304 | reg_sser_rw_rec_cfg rec_cfg = {0}; | |
305 | ||
e908dfc3 | 306 | DEBUG(printk(KERN_DEBUG "Init sync serial port %d\n", portnbr)); |
51533b61 MS |
307 | |
308 | port->port_nbr = portnbr; | |
309 | port->init_irqs = 1; | |
310 | ||
e908dfc3 JN |
311 | port->out_rd_ptr = port->out_buffer; |
312 | port->out_buf_count = 0; | |
313 | ||
51533b61 MS |
314 | port->output = 1; |
315 | port->input = 0; | |
316 | ||
317 | port->readp = port->flip; | |
318 | port->writep = port->flip; | |
319 | port->in_buffer_size = IN_BUFFER_SIZE; | |
320 | port->inbufchunk = IN_DESCR_SIZE; | |
321 | port->next_rx_desc = &port->in_descr[0]; | |
e908dfc3 | 322 | port->prev_rx_desc = &port->in_descr[NBR_IN_DESCR-1]; |
51533b61 MS |
323 | port->prev_rx_desc->eol = 1; |
324 | ||
325 | init_waitqueue_head(&port->out_wait_q); | |
326 | init_waitqueue_head(&port->in_wait_q); | |
327 | ||
328 | spin_lock_init(&port->lock); | |
329 | ||
330 | cfg.out_clk_src = regk_sser_intern_clk; | |
331 | cfg.out_clk_pol = regk_sser_pos; | |
332 | cfg.clk_od_mode = regk_sser_no; | |
333 | cfg.clk_dir = regk_sser_out; | |
334 | cfg.gate_clk = regk_sser_no; | |
335 | cfg.base_freq = regk_sser_f29_493; | |
336 | cfg.clk_div = 256; | |
337 | REG_WR(sser, port->regi_sser, rw_cfg, cfg); | |
338 | ||
339 | frm_cfg.wordrate = DEFAULT_WORD_RATE; | |
340 | frm_cfg.type = regk_sser_edge; | |
341 | frm_cfg.frame_pin_dir = regk_sser_out; | |
342 | frm_cfg.frame_pin_use = regk_sser_frm; | |
343 | frm_cfg.status_pin_dir = regk_sser_in; | |
344 | frm_cfg.status_pin_use = regk_sser_hold; | |
345 | frm_cfg.out_on = regk_sser_tr; | |
346 | frm_cfg.tr_delay = 1; | |
347 | REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg); | |
348 | ||
349 | tr_cfg.urun_stop = regk_sser_no; | |
350 | tr_cfg.sample_size = 7; | |
351 | tr_cfg.sh_dir = regk_sser_msbfirst; | |
352 | tr_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; | |
e908dfc3 | 353 | #if 0 |
51533b61 MS |
354 | tr_cfg.rate_ctrl = regk_sser_bulk; |
355 | tr_cfg.data_pin_use = regk_sser_dout; | |
e908dfc3 JN |
356 | #else |
357 | tr_cfg.rate_ctrl = regk_sser_iso; | |
358 | tr_cfg.data_pin_use = regk_sser_dout; | |
359 | #endif | |
51533b61 MS |
360 | tr_cfg.bulk_wspace = 1; |
361 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
362 | ||
363 | rec_cfg.sample_size = 7; | |
364 | rec_cfg.sh_dir = regk_sser_msbfirst; | |
365 | rec_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; | |
366 | rec_cfg.fifo_thr = regk_sser_inf; | |
367 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); | |
e908dfc3 JN |
368 | |
369 | #ifdef SYNC_SER_DMA | |
370 | /* Setup the descriptor ring for dma out/transmit. */ | |
371 | for (i = 0; i < NBR_OUT_DESCR; i++) { | |
372 | port->out_descr[i].wait = 0; | |
373 | port->out_descr[i].intr = 1; | |
374 | port->out_descr[i].eol = 0; | |
375 | port->out_descr[i].out_eop = 0; | |
376 | port->out_descr[i].next = | |
377 | (dma_descr_data *)virt_to_phys(&port->out_descr[i+1]); | |
378 | } | |
379 | ||
380 | /* Create a ring from the list. */ | |
381 | port->out_descr[NBR_OUT_DESCR-1].next = | |
382 | (dma_descr_data *)virt_to_phys(&port->out_descr[0]); | |
383 | ||
384 | /* Setup context for traversing the ring. */ | |
385 | port->active_tr_descr = &port->out_descr[0]; | |
386 | port->prev_tr_descr = &port->out_descr[NBR_OUT_DESCR-1]; | |
387 | port->catch_tr_descr = &port->out_descr[0]; | |
388 | #endif | |
51533b61 MS |
389 | } |
390 | ||
391 | static inline int sync_data_avail(struct sync_port *port) | |
392 | { | |
393 | int avail; | |
394 | unsigned char *start; | |
395 | unsigned char *end; | |
396 | ||
397 | start = (unsigned char*)port->readp; /* cast away volatile */ | |
398 | end = (unsigned char*)port->writep; /* cast away volatile */ | |
399 | /* 0123456789 0123456789 | |
400 | * ----- - ----- | |
401 | * ^rp ^wp ^wp ^rp | |
402 | */ | |
403 | ||
e908dfc3 | 404 | if (end >= start) |
51533b61 MS |
405 | avail = end - start; |
406 | else | |
407 | avail = port->in_buffer_size - (start - end); | |
408 | return avail; | |
409 | } | |
410 | ||
411 | static inline int sync_data_avail_to_end(struct sync_port *port) | |
412 | { | |
413 | int avail; | |
414 | unsigned char *start; | |
415 | unsigned char *end; | |
416 | ||
417 | start = (unsigned char*)port->readp; /* cast away volatile */ | |
418 | end = (unsigned char*)port->writep; /* cast away volatile */ | |
419 | /* 0123456789 0123456789 | |
420 | * ----- ----- | |
421 | * ^rp ^wp ^wp ^rp | |
422 | */ | |
423 | ||
e908dfc3 | 424 | if (end >= start) |
51533b61 MS |
425 | avail = end - start; |
426 | else | |
427 | avail = port->flip + port->in_buffer_size - start; | |
428 | return avail; | |
429 | } | |
430 | ||
431 | static int sync_serial_open(struct inode *inode, struct file *file) | |
432 | { | |
32ea086b | 433 | int dev = iminor(inode); |
0c401df3 | 434 | int ret = -EBUSY; |
e908dfc3 | 435 | sync_port *port; |
51533b61 MS |
436 | reg_dma_rw_cfg cfg = {.en = regk_dma_yes}; |
437 | reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; | |
438 | ||
0890b588 | 439 | mutex_lock(&sync_serial_mutex); |
e908dfc3 | 440 | DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); |
51533b61 | 441 | |
e908dfc3 | 442 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) |
51533b61 | 443 | { |
e908dfc3 | 444 | DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); |
0c401df3 JC |
445 | ret = -ENODEV; |
446 | goto out; | |
51533b61 MS |
447 | } |
448 | port = &ports[dev]; | |
449 | /* Allow open this device twice (assuming one reader and one writer) */ | |
450 | if (port->busy == 2) | |
451 | { | |
e908dfc3 | 452 | DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); |
0c401df3 | 453 | goto out; |
51533b61 | 454 | } |
e908dfc3 JN |
455 | |
456 | ||
51533b61 MS |
457 | if (port->init_irqs) { |
458 | if (port->use_dma) { | |
e908dfc3 | 459 | if (port == &ports[0]) { |
51533b61 | 460 | #ifdef SYNC_SER_DMA |
e908dfc3 JN |
461 | if (request_irq(DMA_OUT_INTR_VECT, |
462 | tr_interrupt, | |
463 | 0, | |
464 | "synchronous serial 0 dma tr", | |
465 | &ports[0])) { | |
51533b61 | 466 | printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); |
0c401df3 | 467 | goto out; |
e908dfc3 JN |
468 | } else if (request_irq(DMA_IN_INTR_VECT, |
469 | rx_interrupt, | |
470 | 0, | |
471 | "synchronous serial 1 dma rx", | |
472 | &ports[0])) { | |
473 | free_irq(DMA_OUT_INTR_VECT, &port[0]); | |
51533b61 | 474 | printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); |
0c401df3 | 475 | goto out; |
e908dfc3 JN |
476 | } else if (crisv32_request_dma(OUT_DMA_NBR, |
477 | "synchronous serial 0 dma tr", | |
478 | DMA_VERBOSE_ON_ERROR, | |
479 | 0, | |
480 | REQ_DMA_SYNCSER)) { | |
481 | free_irq(DMA_OUT_INTR_VECT, &port[0]); | |
482 | free_irq(DMA_IN_INTR_VECT, &port[0]); | |
51533b61 | 483 | printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel"); |
0c401df3 | 484 | goto out; |
e908dfc3 JN |
485 | } else if (crisv32_request_dma(IN_DMA_NBR, |
486 | "synchronous serial 0 dma rec", | |
487 | DMA_VERBOSE_ON_ERROR, | |
488 | 0, | |
489 | REQ_DMA_SYNCSER)) { | |
490 | crisv32_free_dma(OUT_DMA_NBR); | |
491 | free_irq(DMA_OUT_INTR_VECT, &port[0]); | |
492 | free_irq(DMA_IN_INTR_VECT, &port[0]); | |
51533b61 | 493 | printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel"); |
0c401df3 | 494 | goto out; |
51533b61 MS |
495 | } |
496 | #endif | |
497 | } | |
e908dfc3 JN |
498 | #ifdef CONFIG_ETRAXFS |
499 | else if (port == &ports[1]) { | |
51533b61 MS |
500 | #ifdef SYNC_SER_DMA |
501 | if (request_irq(DMA6_INTR_VECT, | |
502 | tr_interrupt, | |
503 | 0, | |
504 | "synchronous serial 1 dma tr", | |
505 | &ports[1])) { | |
506 | printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ"); | |
0c401df3 | 507 | goto out; |
51533b61 MS |
508 | } else if (request_irq(DMA7_INTR_VECT, |
509 | rx_interrupt, | |
510 | 0, | |
511 | "synchronous serial 1 dma rx", | |
512 | &ports[1])) { | |
513 | free_irq(DMA6_INTR_VECT, &ports[1]); | |
514 | printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); | |
0c401df3 | 515 | goto out; |
e908dfc3 JN |
516 | } else if (crisv32_request_dma( |
517 | SYNC_SER1_TX_DMA_NBR, | |
518 | "synchronous serial 1 dma tr", | |
519 | DMA_VERBOSE_ON_ERROR, | |
520 | 0, | |
521 | dma_sser1)) { | |
522 | free_irq(DMA6_INTR_VECT, &ports[1]); | |
523 | free_irq(DMA7_INTR_VECT, &ports[1]); | |
51533b61 | 524 | printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); |
0c401df3 | 525 | goto out; |
e908dfc3 JN |
526 | } else if (crisv32_request_dma( |
527 | SYNC_SER1_RX_DMA_NBR, | |
528 | "synchronous serial 3 dma rec", | |
529 | DMA_VERBOSE_ON_ERROR, | |
530 | 0, | |
531 | dma_sser1)) { | |
51533b61 MS |
532 | crisv32_free_dma(SYNC_SER1_TX_DMA_NBR); |
533 | free_irq(DMA6_INTR_VECT, &ports[1]); | |
534 | free_irq(DMA7_INTR_VECT, &ports[1]); | |
535 | printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel"); | |
0c401df3 | 536 | goto out; |
51533b61 MS |
537 | } |
538 | #endif | |
539 | } | |
e908dfc3 | 540 | #endif |
51533b61 MS |
541 | /* Enable DMAs */ |
542 | REG_WR(dma, port->regi_dmain, rw_cfg, cfg); | |
543 | REG_WR(dma, port->regi_dmaout, rw_cfg, cfg); | |
544 | /* Enable DMA IRQs */ | |
545 | REG_WR(dma, port->regi_dmain, rw_intr_mask, intr_mask); | |
546 | REG_WR(dma, port->regi_dmaout, rw_intr_mask, intr_mask); | |
e908dfc3 | 547 | /* Set up wordsize = 1 for DMAs. */ |
51533b61 MS |
548 | DMA_WR_CMD (port->regi_dmain, regk_dma_set_w_size1); |
549 | DMA_WR_CMD (port->regi_dmaout, regk_dma_set_w_size1); | |
550 | ||
551 | start_dma_in(port); | |
552 | port->init_irqs = 0; | |
553 | } else { /* !port->use_dma */ | |
554 | #ifdef SYNC_SER_MANUAL | |
555 | if (port == &ports[0]) { | |
e908dfc3 | 556 | if (request_irq(SYNCSER_INTR_VECT, |
51533b61 MS |
557 | manual_interrupt, |
558 | 0, | |
559 | "synchronous serial manual irq", | |
560 | &ports[0])) { | |
561 | printk("Can't allocate sync serial manual irq"); | |
0c401df3 | 562 | goto out; |
51533b61 | 563 | } |
e908dfc3 JN |
564 | } |
565 | #ifdef CONFIG_ETRAXFS | |
566 | else if (port == &ports[1]) { | |
51533b61 MS |
567 | if (request_irq(SSER1_INTR_VECT, |
568 | manual_interrupt, | |
569 | 0, | |
570 | "synchronous serial manual irq", | |
571 | &ports[1])) { | |
572 | printk(KERN_CRIT "Can't allocate sync serial manual irq"); | |
0c401df3 | 573 | goto out; |
51533b61 MS |
574 | } |
575 | } | |
e908dfc3 | 576 | #endif |
51533b61 MS |
577 | port->init_irqs = 0; |
578 | #else | |
579 | panic("sync_serial: Manual mode not supported.\n"); | |
580 | #endif /* SYNC_SER_MANUAL */ | |
581 | } | |
e908dfc3 | 582 | |
51533b61 MS |
583 | } /* port->init_irqs */ |
584 | ||
585 | port->busy++; | |
0c401df3 JC |
586 | ret = 0; |
587 | out: | |
0890b588 | 588 | mutex_unlock(&sync_serial_mutex); |
0c401df3 | 589 | return ret; |
51533b61 MS |
590 | } |
591 | ||
592 | static int sync_serial_release(struct inode *inode, struct file *file) | |
593 | { | |
32ea086b | 594 | int dev = iminor(inode); |
e908dfc3 | 595 | sync_port *port; |
51533b61 | 596 | |
e908dfc3 | 597 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) |
51533b61 MS |
598 | { |
599 | DEBUG(printk("Invalid minor %d\n", dev)); | |
600 | return -ENODEV; | |
601 | } | |
602 | port = &ports[dev]; | |
603 | if (port->busy) | |
604 | port->busy--; | |
605 | if (!port->busy) | |
606 | /* XXX */ ; | |
607 | return 0; | |
608 | } | |
609 | ||
610 | static unsigned int sync_serial_poll(struct file *file, poll_table *wait) | |
611 | { | |
496ad9aa | 612 | int dev = iminor(file_inode(file)); |
51533b61 | 613 | unsigned int mask = 0; |
e908dfc3 | 614 | sync_port *port; |
51533b61 MS |
615 | DEBUGPOLL( static unsigned int prev_mask = 0; ); |
616 | ||
617 | port = &ports[dev]; | |
e908dfc3 JN |
618 | |
619 | if (!port->started) { | |
620 | reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); | |
621 | reg_sser_rw_rec_cfg rec_cfg = | |
622 | REG_RD(sser, port->regi_sser, rw_rec_cfg); | |
623 | cfg.en = regk_sser_yes; | |
624 | rec_cfg.rec_en = port->input; | |
625 | REG_WR(sser, port->regi_sser, rw_cfg, cfg); | |
626 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); | |
627 | port->started = 1; | |
628 | } | |
629 | ||
51533b61 MS |
630 | poll_wait(file, &port->out_wait_q, wait); |
631 | poll_wait(file, &port->in_wait_q, wait); | |
e908dfc3 JN |
632 | |
633 | /* No active transfer, descriptors are available */ | |
634 | if (port->output && !port->tr_running) | |
635 | mask |= POLLOUT | POLLWRNORM; | |
636 | ||
637 | /* Descriptor and buffer space available. */ | |
638 | if (port->output && | |
639 | port->active_tr_descr != port->catch_tr_descr && | |
640 | port->out_buf_count < OUT_BUFFER_SIZE) | |
51533b61 | 641 | mask |= POLLOUT | POLLWRNORM; |
e908dfc3 | 642 | |
51533b61 | 643 | /* At least an inbufchunk of data */ |
e908dfc3 | 644 | if (port->input && sync_data_avail(port) >= port->inbufchunk) |
51533b61 MS |
645 | mask |= POLLIN | POLLRDNORM; |
646 | ||
647 | DEBUGPOLL(if (mask != prev_mask) | |
648 | printk("sync_serial_poll: mask 0x%08X %s %s\n", mask, | |
649 | mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":""); | |
650 | prev_mask = mask; | |
651 | ); | |
652 | return mask; | |
653 | } | |
654 | ||
90276a1a | 655 | static int sync_serial_ioctl(struct file *file, |
51533b61 MS |
656 | unsigned int cmd, unsigned long arg) |
657 | { | |
658 | int return_val = 0; | |
e908dfc3 | 659 | int dma_w_size = regk_dma_set_w_size1; |
496ad9aa | 660 | int dev = iminor(file_inode(file)); |
e908dfc3 | 661 | sync_port *port; |
51533b61 MS |
662 | reg_sser_rw_tr_cfg tr_cfg; |
663 | reg_sser_rw_rec_cfg rec_cfg; | |
664 | reg_sser_rw_frm_cfg frm_cfg; | |
665 | reg_sser_rw_cfg gen_cfg; | |
666 | reg_sser_rw_intr_mask intr_mask; | |
667 | ||
e908dfc3 | 668 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) |
51533b61 MS |
669 | { |
670 | DEBUG(printk("Invalid minor %d\n", dev)); | |
671 | return -1; | |
672 | } | |
673 | port = &ports[dev]; | |
674 | spin_lock_irq(&port->lock); | |
675 | ||
676 | tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); | |
677 | rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); | |
678 | frm_cfg = REG_RD(sser, port->regi_sser, rw_frm_cfg); | |
679 | gen_cfg = REG_RD(sser, port->regi_sser, rw_cfg); | |
680 | intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); | |
681 | ||
682 | switch(cmd) | |
683 | { | |
684 | case SSP_SPEED: | |
685 | if (GET_SPEED(arg) == CODEC) | |
686 | { | |
e908dfc3 JN |
687 | unsigned int freq; |
688 | ||
51533b61 | 689 | gen_cfg.base_freq = regk_sser_f32; |
e908dfc3 JN |
690 | |
691 | /* Clock divider will internally be | |
692 | * gen_cfg.clk_div + 1. | |
693 | */ | |
694 | ||
695 | freq = GET_FREQ(arg); | |
696 | switch (freq) { | |
697 | case FREQ_32kHz: | |
698 | case FREQ_64kHz: | |
699 | case FREQ_128kHz: | |
700 | case FREQ_256kHz: | |
701 | gen_cfg.clk_div = 125 * | |
702 | (1 << (freq - FREQ_256kHz)) - 1; | |
703 | break; | |
704 | case FREQ_512kHz: | |
705 | gen_cfg.clk_div = 62; | |
706 | break; | |
707 | case FREQ_1MHz: | |
708 | case FREQ_2MHz: | |
709 | case FREQ_4MHz: | |
710 | gen_cfg.clk_div = 8 * (1 << freq) - 1; | |
711 | break; | |
712 | } | |
713 | } else { | |
51533b61 | 714 | gen_cfg.base_freq = regk_sser_f29_493; |
e908dfc3 JN |
715 | switch (GET_SPEED(arg)) { |
716 | case SSP150: | |
717 | gen_cfg.clk_div = 29493000 / (150 * 8) - 1; | |
718 | break; | |
719 | case SSP300: | |
720 | gen_cfg.clk_div = 29493000 / (300 * 8) - 1; | |
721 | break; | |
722 | case SSP600: | |
723 | gen_cfg.clk_div = 29493000 / (600 * 8) - 1; | |
724 | break; | |
725 | case SSP1200: | |
726 | gen_cfg.clk_div = 29493000 / (1200 * 8) - 1; | |
727 | break; | |
728 | case SSP2400: | |
729 | gen_cfg.clk_div = 29493000 / (2400 * 8) - 1; | |
730 | break; | |
731 | case SSP4800: | |
732 | gen_cfg.clk_div = 29493000 / (4800 * 8) - 1; | |
733 | break; | |
734 | case SSP9600: | |
735 | gen_cfg.clk_div = 29493000 / (9600 * 8) - 1; | |
736 | break; | |
737 | case SSP19200: | |
738 | gen_cfg.clk_div = 29493000 / (19200 * 8) - 1; | |
739 | break; | |
740 | case SSP28800: | |
741 | gen_cfg.clk_div = 29493000 / (28800 * 8) - 1; | |
742 | break; | |
743 | case SSP57600: | |
744 | gen_cfg.clk_div = 29493000 / (57600 * 8) - 1; | |
745 | break; | |
746 | case SSP115200: | |
747 | gen_cfg.clk_div = 29493000 / (115200 * 8) - 1; | |
748 | break; | |
749 | case SSP230400: | |
750 | gen_cfg.clk_div = 29493000 / (230400 * 8) - 1; | |
751 | break; | |
752 | case SSP460800: | |
753 | gen_cfg.clk_div = 29493000 / (460800 * 8) - 1; | |
754 | break; | |
755 | case SSP921600: | |
756 | gen_cfg.clk_div = 29493000 / (921600 * 8) - 1; | |
757 | break; | |
758 | case SSP3125000: | |
759 | gen_cfg.base_freq = regk_sser_f100; | |
760 | gen_cfg.clk_div = 100000000 / (3125000 * 8) - 1; | |
761 | break; | |
51533b61 MS |
762 | |
763 | } | |
764 | } | |
765 | frm_cfg.wordrate = GET_WORD_RATE(arg); | |
766 | ||
767 | break; | |
768 | case SSP_MODE: | |
769 | switch(arg) | |
770 | { | |
771 | case MASTER_OUTPUT: | |
772 | port->output = 1; | |
773 | port->input = 0; | |
e908dfc3 JN |
774 | frm_cfg.out_on = regk_sser_tr; |
775 | frm_cfg.frame_pin_dir = regk_sser_out; | |
51533b61 MS |
776 | gen_cfg.clk_dir = regk_sser_out; |
777 | break; | |
778 | case SLAVE_OUTPUT: | |
779 | port->output = 1; | |
780 | port->input = 0; | |
e908dfc3 | 781 | frm_cfg.frame_pin_dir = regk_sser_in; |
51533b61 MS |
782 | gen_cfg.clk_dir = regk_sser_in; |
783 | break; | |
784 | case MASTER_INPUT: | |
785 | port->output = 0; | |
786 | port->input = 1; | |
e908dfc3 JN |
787 | frm_cfg.frame_pin_dir = regk_sser_out; |
788 | frm_cfg.out_on = regk_sser_intern_tb; | |
51533b61 MS |
789 | gen_cfg.clk_dir = regk_sser_out; |
790 | break; | |
791 | case SLAVE_INPUT: | |
792 | port->output = 0; | |
793 | port->input = 1; | |
e908dfc3 | 794 | frm_cfg.frame_pin_dir = regk_sser_in; |
51533b61 MS |
795 | gen_cfg.clk_dir = regk_sser_in; |
796 | break; | |
797 | case MASTER_BIDIR: | |
798 | port->output = 1; | |
799 | port->input = 1; | |
e908dfc3 JN |
800 | frm_cfg.frame_pin_dir = regk_sser_out; |
801 | frm_cfg.out_on = regk_sser_intern_tb; | |
51533b61 MS |
802 | gen_cfg.clk_dir = regk_sser_out; |
803 | break; | |
804 | case SLAVE_BIDIR: | |
805 | port->output = 1; | |
806 | port->input = 1; | |
e908dfc3 | 807 | frm_cfg.frame_pin_dir = regk_sser_in; |
51533b61 MS |
808 | gen_cfg.clk_dir = regk_sser_in; |
809 | break; | |
810 | default: | |
811 | spin_unlock_irq(&port->lock); | |
812 | return -EINVAL; | |
51533b61 MS |
813 | } |
814 | if (!port->use_dma || (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)) | |
815 | intr_mask.rdav = regk_sser_yes; | |
816 | break; | |
817 | case SSP_FRAME_SYNC: | |
e908dfc3 JN |
818 | if (arg & NORMAL_SYNC) { |
819 | frm_cfg.rec_delay = 1; | |
51533b61 | 820 | frm_cfg.tr_delay = 1; |
e908dfc3 | 821 | } |
51533b61 | 822 | else if (arg & EARLY_SYNC) |
e908dfc3 JN |
823 | frm_cfg.rec_delay = frm_cfg.tr_delay = 0; |
824 | else if (arg & SECOND_WORD_SYNC) { | |
825 | frm_cfg.rec_delay = 7; | |
826 | frm_cfg.tr_delay = 1; | |
827 | } | |
51533b61 MS |
828 | |
829 | tr_cfg.bulk_wspace = frm_cfg.tr_delay; | |
830 | frm_cfg.early_wend = regk_sser_yes; | |
831 | if (arg & BIT_SYNC) | |
832 | frm_cfg.type = regk_sser_edge; | |
833 | else if (arg & WORD_SYNC) | |
834 | frm_cfg.type = regk_sser_level; | |
835 | else if (arg & EXTENDED_SYNC) | |
836 | frm_cfg.early_wend = regk_sser_no; | |
837 | ||
838 | if (arg & SYNC_ON) | |
839 | frm_cfg.frame_pin_use = regk_sser_frm; | |
840 | else if (arg & SYNC_OFF) | |
841 | frm_cfg.frame_pin_use = regk_sser_gio0; | |
842 | ||
e908dfc3 JN |
843 | dma_w_size = regk_dma_set_w_size2; |
844 | if (arg & WORD_SIZE_8) { | |
51533b61 | 845 | rec_cfg.sample_size = tr_cfg.sample_size = 7; |
e908dfc3 JN |
846 | dma_w_size = regk_dma_set_w_size1; |
847 | } else if (arg & WORD_SIZE_12) | |
51533b61 MS |
848 | rec_cfg.sample_size = tr_cfg.sample_size = 11; |
849 | else if (arg & WORD_SIZE_16) | |
850 | rec_cfg.sample_size = tr_cfg.sample_size = 15; | |
851 | else if (arg & WORD_SIZE_24) | |
852 | rec_cfg.sample_size = tr_cfg.sample_size = 23; | |
853 | else if (arg & WORD_SIZE_32) | |
854 | rec_cfg.sample_size = tr_cfg.sample_size = 31; | |
855 | ||
856 | if (arg & BIT_ORDER_MSB) | |
857 | rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst; | |
858 | else if (arg & BIT_ORDER_LSB) | |
859 | rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_lsbfirst; | |
860 | ||
e908dfc3 JN |
861 | if (arg & FLOW_CONTROL_ENABLE) { |
862 | frm_cfg.status_pin_use = regk_sser_frm; | |
51533b61 | 863 | rec_cfg.fifo_thr = regk_sser_thr16; |
e908dfc3 JN |
864 | } else if (arg & FLOW_CONTROL_DISABLE) { |
865 | frm_cfg.status_pin_use = regk_sser_gio0; | |
51533b61 | 866 | rec_cfg.fifo_thr = regk_sser_inf; |
e908dfc3 | 867 | } |
51533b61 MS |
868 | |
869 | if (arg & CLOCK_NOT_GATED) | |
870 | gen_cfg.gate_clk = regk_sser_no; | |
871 | else if (arg & CLOCK_GATED) | |
872 | gen_cfg.gate_clk = regk_sser_yes; | |
873 | ||
874 | break; | |
875 | case SSP_IPOLARITY: | |
876 | /* NOTE!! negedge is considered NORMAL */ | |
877 | if (arg & CLOCK_NORMAL) | |
878 | rec_cfg.clk_pol = regk_sser_neg; | |
879 | else if (arg & CLOCK_INVERT) | |
880 | rec_cfg.clk_pol = regk_sser_pos; | |
881 | ||
882 | if (arg & FRAME_NORMAL) | |
883 | frm_cfg.level = regk_sser_pos_hi; | |
884 | else if (arg & FRAME_INVERT) | |
885 | frm_cfg.level = regk_sser_neg_lo; | |
886 | ||
887 | if (arg & STATUS_NORMAL) | |
888 | gen_cfg.hold_pol = regk_sser_pos; | |
889 | else if (arg & STATUS_INVERT) | |
890 | gen_cfg.hold_pol = regk_sser_neg; | |
891 | break; | |
892 | case SSP_OPOLARITY: | |
893 | if (arg & CLOCK_NORMAL) | |
51533b61 | 894 | gen_cfg.out_clk_pol = regk_sser_pos; |
e908dfc3 JN |
895 | else if (arg & CLOCK_INVERT) |
896 | gen_cfg.out_clk_pol = regk_sser_neg; | |
51533b61 MS |
897 | |
898 | if (arg & FRAME_NORMAL) | |
899 | frm_cfg.level = regk_sser_pos_hi; | |
900 | else if (arg & FRAME_INVERT) | |
901 | frm_cfg.level = regk_sser_neg_lo; | |
902 | ||
903 | if (arg & STATUS_NORMAL) | |
904 | gen_cfg.hold_pol = regk_sser_pos; | |
905 | else if (arg & STATUS_INVERT) | |
906 | gen_cfg.hold_pol = regk_sser_neg; | |
907 | break; | |
908 | case SSP_SPI: | |
909 | rec_cfg.fifo_thr = regk_sser_inf; | |
910 | rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst; | |
911 | rec_cfg.sample_size = tr_cfg.sample_size = 7; | |
912 | frm_cfg.frame_pin_use = regk_sser_frm; | |
913 | frm_cfg.type = regk_sser_level; | |
914 | frm_cfg.tr_delay = 1; | |
915 | frm_cfg.level = regk_sser_neg_lo; | |
916 | if (arg & SPI_SLAVE) | |
917 | { | |
918 | rec_cfg.clk_pol = regk_sser_neg; | |
919 | gen_cfg.clk_dir = regk_sser_in; | |
920 | port->input = 1; | |
921 | port->output = 0; | |
922 | } | |
923 | else | |
924 | { | |
925 | gen_cfg.out_clk_pol = regk_sser_pos; | |
926 | port->input = 0; | |
927 | port->output = 1; | |
928 | gen_cfg.clk_dir = regk_sser_out; | |
929 | } | |
930 | break; | |
931 | case SSP_INBUFCHUNK: | |
932 | break; | |
933 | default: | |
934 | return_val = -1; | |
935 | } | |
936 | ||
937 | ||
e908dfc3 | 938 | if (port->started) { |
51533b61 | 939 | rec_cfg.rec_en = port->input; |
e908dfc3 | 940 | gen_cfg.en = (port->output | port->input); |
51533b61 MS |
941 | } |
942 | ||
943 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
944 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); | |
945 | REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg); | |
946 | REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); | |
947 | REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); | |
948 | ||
e908dfc3 JN |
949 | |
950 | if (cmd == SSP_FRAME_SYNC && (arg & (WORD_SIZE_8 | WORD_SIZE_12 | | |
951 | WORD_SIZE_16 | WORD_SIZE_24 | WORD_SIZE_32))) { | |
952 | int en = gen_cfg.en; | |
953 | gen_cfg.en = 0; | |
954 | REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); | |
955 | /* ##### Should DMA be stoped before we change dma size? */ | |
956 | DMA_WR_CMD(port->regi_dmain, dma_w_size); | |
957 | DMA_WR_CMD(port->regi_dmaout, dma_w_size); | |
958 | gen_cfg.en = en; | |
959 | REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); | |
960 | } | |
961 | ||
51533b61 MS |
962 | spin_unlock_irq(&port->lock); |
963 | return return_val; | |
964 | } | |
965 | ||
90276a1a JN |
966 | static long sync_serial_ioctl(struct file *file, |
967 | unsigned int cmd, unsigned long arg) | |
968 | { | |
969 | long ret; | |
970 | ||
0890b588 | 971 | mutex_lock(&sync_serial_mutex); |
90276a1a | 972 | ret = sync_serial_ioctl_unlocked(file, cmd, arg); |
0890b588 | 973 | mutex_unlock(&sync_serial_mutex); |
90276a1a JN |
974 | |
975 | return ret; | |
976 | } | |
977 | ||
e908dfc3 JN |
978 | /* NOTE: sync_serial_write does not support concurrency */ |
979 | static ssize_t sync_serial_write(struct file *file, const char *buf, | |
980 | size_t count, loff_t *ppos) | |
51533b61 | 981 | { |
496ad9aa | 982 | int dev = iminor(file_inode(file)); |
51533b61 | 983 | DECLARE_WAITQUEUE(wait, current); |
e908dfc3 JN |
984 | struct sync_port *port; |
985 | int trunc_count; | |
51533b61 | 986 | unsigned long flags; |
e908dfc3 JN |
987 | int bytes_free; |
988 | int out_buf_count; | |
51533b61 | 989 | |
e908dfc3 JN |
990 | unsigned char *rd_ptr; /* First allocated byte in the buffer */ |
991 | unsigned char *wr_ptr; /* First free byte in the buffer */ | |
992 | unsigned char *buf_stop_ptr; /* Last byte + 1 */ | |
993 | ||
994 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) { | |
51533b61 MS |
995 | DEBUG(printk("Invalid minor %d\n", dev)); |
996 | return -ENODEV; | |
997 | } | |
998 | port = &ports[dev]; | |
999 | ||
e908dfc3 JN |
1000 | /* |<- OUT_BUFFER_SIZE ->| |
1001 | * |<- out_buf_count ->| | |
1002 | * |<- trunc_count ->| ...->| | |
1003 | * ______________________________________________________ | |
1004 | * | free | data | free | | |
1005 | * |_________|___________________|________________________| | |
1006 | * ^ rd_ptr ^ wr_ptr | |
51533b61 | 1007 | */ |
e908dfc3 JN |
1008 | DEBUGWRITE(printk(KERN_DEBUG "W d%d c %lu a: %p c: %p\n", |
1009 | port->port_nbr, count, port->active_tr_descr, | |
1010 | port->catch_tr_descr)); | |
51533b61 MS |
1011 | |
1012 | /* Read variables that may be updated by interrupts */ | |
1013 | spin_lock_irqsave(&port->lock, flags); | |
e908dfc3 JN |
1014 | rd_ptr = port->out_rd_ptr; |
1015 | out_buf_count = port->out_buf_count; | |
51533b61 | 1016 | spin_unlock_irqrestore(&port->lock, flags); |
51533b61 | 1017 | |
e908dfc3 JN |
1018 | /* Check if resources are available */ |
1019 | if (port->tr_running && | |
1020 | ((port->use_dma && port->active_tr_descr == port->catch_tr_descr) || | |
1021 | out_buf_count >= OUT_BUFFER_SIZE)) { | |
1022 | DEBUGWRITE(printk(KERN_DEBUG "sser%d full\n", dev)); | |
1023 | return -EAGAIN; | |
1024 | } | |
1025 | ||
1026 | buf_stop_ptr = port->out_buffer + OUT_BUFFER_SIZE; | |
1027 | ||
1028 | /* Determine pointer to the first free byte, before copying. */ | |
1029 | wr_ptr = rd_ptr + out_buf_count; | |
1030 | if (wr_ptr >= buf_stop_ptr) | |
1031 | wr_ptr -= OUT_BUFFER_SIZE; | |
1032 | ||
1033 | /* If we wrap the ring buffer, let the user space program handle it by | |
1034 | * truncating the data. This could be more elegant, small buffer | |
1035 | * fragments may occur. | |
1036 | */ | |
1037 | bytes_free = OUT_BUFFER_SIZE - out_buf_count; | |
1038 | if (wr_ptr + bytes_free > buf_stop_ptr) | |
1039 | bytes_free = buf_stop_ptr - wr_ptr; | |
1040 | trunc_count = (count < bytes_free) ? count : bytes_free; | |
51533b61 | 1041 | |
e908dfc3 | 1042 | if (copy_from_user(wr_ptr, buf, trunc_count)) |
51533b61 MS |
1043 | return -EFAULT; |
1044 | ||
e908dfc3 JN |
1045 | DEBUGOUTBUF(printk(KERN_DEBUG "%-4d + %-4d = %-4d %p %p %p\n", |
1046 | out_buf_count, trunc_count, | |
1047 | port->out_buf_count, port->out_buffer, | |
1048 | wr_ptr, buf_stop_ptr)); | |
51533b61 MS |
1049 | |
1050 | /* Make sure transmitter/receiver is running */ | |
e908dfc3 | 1051 | if (!port->started) { |
51533b61 | 1052 | reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); |
51533b61 MS |
1053 | reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); |
1054 | cfg.en = regk_sser_yes; | |
51533b61 MS |
1055 | rec_cfg.rec_en = port->input; |
1056 | REG_WR(sser, port->regi_sser, rw_cfg, cfg); | |
51533b61 MS |
1057 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); |
1058 | port->started = 1; | |
1059 | } | |
1060 | ||
e908dfc3 JN |
1061 | /* Setup wait if blocking */ |
1062 | if (!(file->f_flags & O_NONBLOCK)) { | |
1063 | add_wait_queue(&port->out_wait_q, &wait); | |
1064 | set_current_state(TASK_INTERRUPTIBLE); | |
51533b61 MS |
1065 | } |
1066 | ||
51533b61 | 1067 | spin_lock_irqsave(&port->lock, flags); |
e908dfc3 JN |
1068 | port->out_buf_count += trunc_count; |
1069 | if (port->use_dma) { | |
1070 | start_dma_out(port, wr_ptr, trunc_count); | |
1071 | } else if (!port->tr_running) { | |
1072 | reg_sser_rw_intr_mask intr_mask; | |
1073 | intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); | |
1074 | /* Start sender by writing data */ | |
1075 | send_word(port); | |
1076 | /* and enable transmitter ready IRQ */ | |
1077 | intr_mask.trdy = 1; | |
1078 | REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); | |
51533b61 MS |
1079 | } |
1080 | spin_unlock_irqrestore(&port->lock, flags); | |
e908dfc3 JN |
1081 | |
1082 | /* Exit if non blocking */ | |
1083 | if (file->f_flags & O_NONBLOCK) { | |
1084 | DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu %08x\n", | |
1085 | port->port_nbr, trunc_count, | |
1086 | REG_RD_INT(dma, port->regi_dmaout, r_intr))); | |
1087 | return trunc_count; | |
1088 | } | |
1089 | ||
51533b61 MS |
1090 | schedule(); |
1091 | set_current_state(TASK_RUNNING); | |
1092 | remove_wait_queue(&port->out_wait_q, &wait); | |
e908dfc3 | 1093 | |
51533b61 | 1094 | if (signal_pending(current)) |
51533b61 | 1095 | return -EINTR; |
cbca6634 | 1096 | |
e908dfc3 JN |
1097 | DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu\n", |
1098 | port->port_nbr, trunc_count)); | |
1099 | return trunc_count; | |
51533b61 MS |
1100 | } |
1101 | ||
1102 | static ssize_t sync_serial_read(struct file * file, char * buf, | |
1103 | size_t count, loff_t *ppos) | |
1104 | { | |
496ad9aa | 1105 | int dev = iminor(file_inode(file)); |
51533b61 MS |
1106 | int avail; |
1107 | sync_port *port; | |
1108 | unsigned char* start; | |
1109 | unsigned char* end; | |
1110 | unsigned long flags; | |
1111 | ||
e908dfc3 | 1112 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) |
51533b61 MS |
1113 | { |
1114 | DEBUG(printk("Invalid minor %d\n", dev)); | |
1115 | return -ENODEV; | |
1116 | } | |
1117 | port = &ports[dev]; | |
1118 | ||
1119 | DEBUGREAD(printk("R%d c %d ri %lu wi %lu /%lu\n", dev, count, port->readp - port->flip, port->writep - port->flip, port->in_buffer_size)); | |
1120 | ||
1121 | if (!port->started) | |
1122 | { | |
1123 | reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); | |
1124 | reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); | |
1125 | reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); | |
1126 | cfg.en = regk_sser_yes; | |
1127 | tr_cfg.tr_en = regk_sser_yes; | |
1128 | rec_cfg.rec_en = regk_sser_yes; | |
1129 | REG_WR(sser, port->regi_sser, rw_cfg, cfg); | |
1130 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
1131 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); | |
1132 | port->started = 1; | |
1133 | } | |
1134 | ||
51533b61 MS |
1135 | /* Calculate number of available bytes */ |
1136 | /* Save pointers to avoid that they are modified by interrupt */ | |
1137 | spin_lock_irqsave(&port->lock, flags); | |
1138 | start = (unsigned char*)port->readp; /* cast away volatile */ | |
1139 | end = (unsigned char*)port->writep; /* cast away volatile */ | |
1140 | spin_unlock_irqrestore(&port->lock, flags); | |
1141 | while ((start == end) && !port->full) /* No data */ | |
1142 | { | |
e908dfc3 | 1143 | DEBUGREAD(printk(KERN_DEBUG "&")); |
51533b61 | 1144 | if (file->f_flags & O_NONBLOCK) |
51533b61 | 1145 | return -EAGAIN; |
51533b61 MS |
1146 | |
1147 | interruptible_sleep_on(&port->in_wait_q); | |
1148 | if (signal_pending(current)) | |
51533b61 | 1149 | return -EINTR; |
e908dfc3 | 1150 | |
51533b61 MS |
1151 | spin_lock_irqsave(&port->lock, flags); |
1152 | start = (unsigned char*)port->readp; /* cast away volatile */ | |
1153 | end = (unsigned char*)port->writep; /* cast away volatile */ | |
1154 | spin_unlock_irqrestore(&port->lock, flags); | |
1155 | } | |
1156 | ||
1157 | /* Lazy read, never return wrapped data. */ | |
1158 | if (port->full) | |
1159 | avail = port->in_buffer_size; | |
1160 | else if (end > start) | |
1161 | avail = end - start; | |
1162 | else | |
1163 | avail = port->flip + port->in_buffer_size - start; | |
1164 | ||
1165 | count = count > avail ? avail : count; | |
1166 | if (copy_to_user(buf, start, count)) | |
1167 | return -EFAULT; | |
1168 | /* Disable interrupts while updating readp */ | |
1169 | spin_lock_irqsave(&port->lock, flags); | |
1170 | port->readp += count; | |
1171 | if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ | |
1172 | port->readp = port->flip; | |
1173 | port->full = 0; | |
1174 | spin_unlock_irqrestore(&port->lock, flags); | |
1175 | DEBUGREAD(printk("r %d\n", count)); | |
1176 | return count; | |
1177 | } | |
1178 | ||
1179 | static void send_word(sync_port* port) | |
1180 | { | |
1181 | reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); | |
1182 | reg_sser_rw_tr_data tr_data = {0}; | |
1183 | ||
1184 | switch(tr_cfg.sample_size) | |
1185 | { | |
1186 | case 8: | |
e908dfc3 JN |
1187 | port->out_buf_count--; |
1188 | tr_data.data = *port->out_rd_ptr++; | |
51533b61 | 1189 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1190 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) |
1191 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1192 | break; |
1193 | case 12: | |
1194 | { | |
e908dfc3 JN |
1195 | int data = (*port->out_rd_ptr++) << 8; |
1196 | data |= *port->out_rd_ptr++; | |
1197 | port->out_buf_count -= 2; | |
51533b61 MS |
1198 | tr_data.data = data; |
1199 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); | |
e908dfc3 JN |
1200 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) |
1201 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1202 | } |
1203 | break; | |
1204 | case 16: | |
e908dfc3 JN |
1205 | port->out_buf_count -= 2; |
1206 | tr_data.data = *(unsigned short *)port->out_rd_ptr; | |
51533b61 | 1207 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1208 | port->out_rd_ptr += 2; |
1209 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) | |
1210 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1211 | break; |
1212 | case 24: | |
e908dfc3 JN |
1213 | port->out_buf_count -= 3; |
1214 | tr_data.data = *(unsigned short *)port->out_rd_ptr; | |
51533b61 | 1215 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1216 | port->out_rd_ptr += 2; |
1217 | tr_data.data = *port->out_rd_ptr++; | |
51533b61 | 1218 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1219 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) |
1220 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1221 | break; |
1222 | case 32: | |
e908dfc3 JN |
1223 | port->out_buf_count -= 4; |
1224 | tr_data.data = *(unsigned short *)port->out_rd_ptr; | |
51533b61 | 1225 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1226 | port->out_rd_ptr += 2; |
1227 | tr_data.data = *(unsigned short *)port->out_rd_ptr; | |
51533b61 | 1228 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1229 | port->out_rd_ptr += 2; |
1230 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) | |
1231 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1232 | break; |
1233 | } | |
1234 | } | |
1235 | ||
e908dfc3 JN |
1236 | static void start_dma_out(struct sync_port *port, |
1237 | const char *data, int count) | |
51533b61 | 1238 | { |
e908dfc3 JN |
1239 | port->active_tr_descr->buf = (char *) virt_to_phys((char *) data); |
1240 | port->active_tr_descr->after = port->active_tr_descr->buf + count; | |
1241 | port->active_tr_descr->intr = 1; | |
1242 | ||
1243 | port->active_tr_descr->eol = 1; | |
1244 | port->prev_tr_descr->eol = 0; | |
1245 | ||
1246 | DEBUGTRDMA(printk(KERN_DEBUG "Inserting eolr:%p eol@:%p\n", | |
1247 | port->prev_tr_descr, port->active_tr_descr)); | |
1248 | port->prev_tr_descr = port->active_tr_descr; | |
1249 | port->active_tr_descr = phys_to_virt((int) port->active_tr_descr->next); | |
1250 | ||
1251 | if (!port->tr_running) { | |
1252 | reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, | |
1253 | rw_tr_cfg); | |
51533b61 | 1254 | |
e908dfc3 JN |
1255 | port->out_context.next = 0; |
1256 | port->out_context.saved_data = | |
1257 | (dma_descr_data *)virt_to_phys(port->prev_tr_descr); | |
1258 | port->out_context.saved_data_buf = port->prev_tr_descr->buf; | |
1259 | ||
1260 | DMA_START_CONTEXT(port->regi_dmaout, | |
1261 | virt_to_phys((char *)&port->out_context)); | |
1262 | ||
1263 | tr_cfg.tr_en = regk_sser_yes; | |
1264 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
1265 | DEBUGTRDMA(printk(KERN_DEBUG "dma s\n");); | |
1266 | } else { | |
1267 | DMA_CONTINUE_DATA(port->regi_dmaout); | |
1268 | DEBUGTRDMA(printk(KERN_DEBUG "dma c\n");); | |
1269 | } | |
51533b61 | 1270 | |
e908dfc3 | 1271 | port->tr_running = 1; |
51533b61 MS |
1272 | } |
1273 | ||
e908dfc3 | 1274 | static void start_dma_in(sync_port *port) |
51533b61 MS |
1275 | { |
1276 | int i; | |
e908dfc3 | 1277 | char *buf; |
51533b61 MS |
1278 | port->writep = port->flip; |
1279 | ||
e908dfc3 | 1280 | if (port->writep > port->flip + port->in_buffer_size) { |
51533b61 MS |
1281 | panic("Offset too large in sync serial driver\n"); |
1282 | return; | |
1283 | } | |
1284 | buf = (char*)virt_to_phys(port->in_buffer); | |
e908dfc3 | 1285 | for (i = 0; i < NBR_IN_DESCR; i++) { |
51533b61 MS |
1286 | port->in_descr[i].buf = buf; |
1287 | port->in_descr[i].after = buf + port->inbufchunk; | |
1288 | port->in_descr[i].intr = 1; | |
1289 | port->in_descr[i].next = (dma_descr_data*)virt_to_phys(&port->in_descr[i+1]); | |
1290 | port->in_descr[i].buf = buf; | |
1291 | buf += port->inbufchunk; | |
1292 | } | |
1293 | /* Link the last descriptor to the first */ | |
1294 | port->in_descr[i-1].next = (dma_descr_data*)virt_to_phys(&port->in_descr[0]); | |
1295 | port->in_descr[i-1].eol = regk_sser_yes; | |
1296 | port->next_rx_desc = &port->in_descr[0]; | |
e908dfc3 | 1297 | port->prev_rx_desc = &port->in_descr[NBR_IN_DESCR - 1]; |
51533b61 MS |
1298 | port->in_context.saved_data = (dma_descr_data*)virt_to_phys(&port->in_descr[0]); |
1299 | port->in_context.saved_data_buf = port->in_descr[0].buf; | |
1300 | DMA_START_CONTEXT(port->regi_dmain, virt_to_phys(&port->in_context)); | |
1301 | } | |
1302 | ||
1303 | #ifdef SYNC_SER_DMA | |
e908dfc3 | 1304 | static irqreturn_t tr_interrupt(int irq, void *dev_id) |
51533b61 MS |
1305 | { |
1306 | reg_dma_r_masked_intr masked; | |
1307 | reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; | |
e908dfc3 | 1308 | reg_dma_rw_stat stat; |
51533b61 | 1309 | int i; |
51533b61 | 1310 | int found = 0; |
e908dfc3 | 1311 | int stop_sser = 0; |
51533b61 | 1312 | |
e908dfc3 | 1313 | for (i = 0; i < NBR_PORTS; i++) { |
51533b61 | 1314 | sync_port *port = &ports[i]; |
e908dfc3 | 1315 | if (!port->enabled || !port->use_dma) |
51533b61 MS |
1316 | continue; |
1317 | ||
e908dfc3 | 1318 | /* IRQ active for the port? */ |
51533b61 | 1319 | masked = REG_RD(dma, port->regi_dmaout, r_masked_intr); |
e908dfc3 JN |
1320 | if (!masked.data) |
1321 | continue; | |
51533b61 | 1322 | |
e908dfc3 JN |
1323 | found = 1; |
1324 | ||
1325 | /* Check if we should stop the DMA transfer */ | |
1326 | stat = REG_RD(dma, port->regi_dmaout, rw_stat); | |
1327 | if (stat.list_state == regk_dma_data_at_eol) | |
1328 | stop_sser = 1; | |
1329 | ||
1330 | /* Clear IRQ */ | |
1331 | REG_WR(dma, port->regi_dmaout, rw_ack_intr, ack_intr); | |
1332 | ||
1333 | if (!stop_sser) { | |
1334 | /* The DMA has completed a descriptor, EOL was not | |
1335 | * encountered, so step relevant descriptor and | |
1336 | * datapointers forward. */ | |
1337 | int sent; | |
1338 | sent = port->catch_tr_descr->after - | |
1339 | port->catch_tr_descr->buf; | |
1340 | DEBUGTXINT(printk(KERN_DEBUG "%-4d - %-4d = %-4d\t" | |
1341 | "in descr %p (ac: %p)\n", | |
1342 | port->out_buf_count, sent, | |
1343 | port->out_buf_count - sent, | |
1344 | port->catch_tr_descr, | |
1345 | port->active_tr_descr);); | |
1346 | port->out_buf_count -= sent; | |
1347 | port->catch_tr_descr = | |
1348 | phys_to_virt((int) port->catch_tr_descr->next); | |
1349 | port->out_rd_ptr = | |
1350 | phys_to_virt((int) port->catch_tr_descr->buf); | |
1351 | } else { | |
1352 | int i, sent; | |
1353 | /* EOL handler. | |
1354 | * Note that if an EOL was encountered during the irq | |
1355 | * locked section of sync_ser_write the DMA will be | |
1356 | * restarted and the eol flag will be cleared. | |
1357 | * The remaining descriptors will be traversed by | |
1358 | * the descriptor interrupts as usual. | |
1359 | */ | |
1360 | i = 0; | |
1361 | while (!port->catch_tr_descr->eol) { | |
1362 | sent = port->catch_tr_descr->after - | |
1363 | port->catch_tr_descr->buf; | |
1364 | DEBUGOUTBUF(printk(KERN_DEBUG | |
1365 | "traversing descr %p -%d (%d)\n", | |
1366 | port->catch_tr_descr, | |
1367 | sent, | |
1368 | port->out_buf_count)); | |
1369 | port->out_buf_count -= sent; | |
1370 | port->catch_tr_descr = phys_to_virt( | |
1371 | (int)port->catch_tr_descr->next); | |
1372 | i++; | |
1373 | if (i >= NBR_OUT_DESCR) { | |
1374 | /* TODO: Reset and recover */ | |
1375 | panic("sync_serial: missing eol"); | |
1376 | } | |
51533b61 | 1377 | } |
e908dfc3 JN |
1378 | sent = port->catch_tr_descr->after - |
1379 | port->catch_tr_descr->buf; | |
1380 | DEBUGOUTBUF(printk(KERN_DEBUG | |
1381 | "eol at descr %p -%d (%d)\n", | |
1382 | port->catch_tr_descr, | |
1383 | sent, | |
1384 | port->out_buf_count)); | |
1385 | ||
1386 | port->out_buf_count -= sent; | |
1387 | ||
1388 | /* Update read pointer to first free byte, we | |
1389 | * may already be writing data there. */ | |
1390 | port->out_rd_ptr = | |
1391 | phys_to_virt((int) port->catch_tr_descr->after); | |
1392 | if (port->out_rd_ptr > port->out_buffer + | |
1393 | OUT_BUFFER_SIZE) | |
1394 | port->out_rd_ptr = port->out_buffer; | |
1395 | ||
1396 | reg_sser_rw_tr_cfg tr_cfg = | |
1397 | REG_RD(sser, port->regi_sser, rw_tr_cfg); | |
1398 | DEBUGTXINT(printk(KERN_DEBUG | |
1399 | "tr_int DMA stop %d, set catch @ %p\n", | |
1400 | port->out_buf_count, | |
1401 | port->active_tr_descr)); | |
1402 | if (port->out_buf_count != 0) | |
1403 | printk(KERN_CRIT "sync_ser: buffer not " | |
1404 | "empty after eol.\n"); | |
1405 | port->catch_tr_descr = port->active_tr_descr; | |
1406 | port->tr_running = 0; | |
1407 | tr_cfg.tr_en = regk_sser_no; | |
1408 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
51533b61 | 1409 | } |
e908dfc3 JN |
1410 | /* wake up the waiting process */ |
1411 | wake_up_interruptible(&port->out_wait_q); | |
51533b61 MS |
1412 | } |
1413 | return IRQ_RETVAL(found); | |
1414 | } /* tr_interrupt */ | |
1415 | ||
e908dfc3 | 1416 | static irqreturn_t rx_interrupt(int irq, void *dev_id) |
51533b61 MS |
1417 | { |
1418 | reg_dma_r_masked_intr masked; | |
1419 | reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; | |
1420 | ||
1421 | int i; | |
1422 | int found = 0; | |
1423 | ||
e908dfc3 | 1424 | for (i = 0; i < NBR_PORTS; i++) |
51533b61 MS |
1425 | { |
1426 | sync_port *port = &ports[i]; | |
1427 | ||
1428 | if (!port->enabled || !port->use_dma ) | |
1429 | continue; | |
1430 | ||
1431 | masked = REG_RD(dma, port->regi_dmain, r_masked_intr); | |
1432 | ||
1433 | if (masked.data) /* Descriptor interrupt */ | |
1434 | { | |
1435 | found = 1; | |
1436 | while (REG_RD(dma, port->regi_dmain, rw_data) != | |
1437 | virt_to_phys(port->next_rx_desc)) { | |
e908dfc3 | 1438 | DEBUGRXINT(printk(KERN_DEBUG "!")); |
51533b61 MS |
1439 | if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) { |
1440 | int first_size = port->flip + port->in_buffer_size - port->writep; | |
1441 | memcpy((char*)port->writep, phys_to_virt((unsigned)port->next_rx_desc->buf), first_size); | |
1442 | memcpy(port->flip, phys_to_virt((unsigned)port->next_rx_desc->buf+first_size), port->inbufchunk - first_size); | |
1443 | port->writep = port->flip + port->inbufchunk - first_size; | |
1444 | } else { | |
1445 | memcpy((char*)port->writep, | |
1446 | phys_to_virt((unsigned)port->next_rx_desc->buf), | |
1447 | port->inbufchunk); | |
1448 | port->writep += port->inbufchunk; | |
1449 | if (port->writep >= port->flip + port->in_buffer_size) | |
1450 | port->writep = port->flip; | |
1451 | } | |
1452 | if (port->writep == port->readp) | |
1453 | { | |
1454 | port->full = 1; | |
1455 | } | |
1456 | ||
e908dfc3 JN |
1457 | port->next_rx_desc->eol = 1; |
1458 | port->prev_rx_desc->eol = 0; | |
1459 | /* Cache bug workaround */ | |
1460 | flush_dma_descr(port->prev_rx_desc, 0); | |
1461 | port->prev_rx_desc = port->next_rx_desc; | |
51533b61 | 1462 | port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next); |
e908dfc3 JN |
1463 | /* Cache bug workaround */ |
1464 | flush_dma_descr(port->prev_rx_desc, 1); | |
1465 | /* wake up the waiting process */ | |
1466 | wake_up_interruptible(&port->in_wait_q); | |
51533b61 MS |
1467 | DMA_CONTINUE(port->regi_dmain); |
1468 | REG_WR(dma, port->regi_dmain, rw_ack_intr, ack_intr); | |
1469 | ||
1470 | } | |
1471 | } | |
1472 | } | |
1473 | return IRQ_RETVAL(found); | |
1474 | } /* rx_interrupt */ | |
1475 | #endif /* SYNC_SER_DMA */ | |
1476 | ||
1477 | #ifdef SYNC_SER_MANUAL | |
e908dfc3 | 1478 | static irqreturn_t manual_interrupt(int irq, void *dev_id) |
51533b61 MS |
1479 | { |
1480 | int i; | |
1481 | int found = 0; | |
1482 | reg_sser_r_masked_intr masked; | |
1483 | ||
e908dfc3 | 1484 | for (i = 0; i < NBR_PORTS; i++) |
51533b61 | 1485 | { |
e908dfc3 | 1486 | sync_port *port = &ports[i]; |
51533b61 MS |
1487 | |
1488 | if (!port->enabled || port->use_dma) | |
1489 | { | |
1490 | continue; | |
1491 | } | |
1492 | ||
1493 | masked = REG_RD(sser, port->regi_sser, r_masked_intr); | |
1494 | if (masked.rdav) /* Data received? */ | |
1495 | { | |
1496 | reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); | |
1497 | reg_sser_r_rec_data data = REG_RD(sser, port->regi_sser, r_rec_data); | |
1498 | found = 1; | |
1499 | /* Read data */ | |
1500 | switch(rec_cfg.sample_size) | |
1501 | { | |
1502 | case 8: | |
1503 | *port->writep++ = data.data & 0xff; | |
1504 | break; | |
1505 | case 12: | |
1506 | *port->writep = (data.data & 0x0ff0) >> 4; | |
1507 | *(port->writep + 1) = data.data & 0x0f; | |
1508 | port->writep+=2; | |
1509 | break; | |
1510 | case 16: | |
1511 | *(unsigned short*)port->writep = data.data; | |
1512 | port->writep+=2; | |
1513 | break; | |
1514 | case 24: | |
1515 | *(unsigned int*)port->writep = data.data; | |
1516 | port->writep+=3; | |
1517 | break; | |
1518 | case 32: | |
1519 | *(unsigned int*)port->writep = data.data; | |
1520 | port->writep+=4; | |
1521 | break; | |
1522 | } | |
1523 | ||
1524 | if (port->writep >= port->flip + port->in_buffer_size) /* Wrap? */ | |
1525 | port->writep = port->flip; | |
1526 | if (port->writep == port->readp) { | |
1527 | /* receive buffer overrun, discard oldest data | |
1528 | */ | |
1529 | port->readp++; | |
1530 | if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ | |
1531 | port->readp = port->flip; | |
1532 | } | |
1533 | if (sync_data_avail(port) >= port->inbufchunk) | |
1534 | wake_up_interruptible(&port->in_wait_q); /* Wake up application */ | |
1535 | } | |
1536 | ||
1537 | if (masked.trdy) /* Transmitter ready? */ | |
1538 | { | |
1539 | found = 1; | |
e908dfc3 | 1540 | if (port->out_buf_count > 0) /* More data to send */ |
51533b61 MS |
1541 | send_word(port); |
1542 | else /* transmission finished */ | |
1543 | { | |
1544 | reg_sser_rw_intr_mask intr_mask; | |
1545 | intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); | |
1546 | intr_mask.trdy = 0; | |
1547 | REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); | |
1548 | wake_up_interruptible(&port->out_wait_q); /* Wake up application */ | |
1549 | } | |
1550 | } | |
1551 | } | |
1552 | return IRQ_RETVAL(found); | |
1553 | } | |
1554 | #endif | |
1555 | ||
1556 | module_init(etrax_sync_serial_init); |