Commit | Line | Data |
---|---|---|
ab472a04 JH |
1 | /* |
2 | * File: arch/blackfin/mach-bf533/H8606.c | |
3 | * Based on: arch/blackfin/mach-bf533/stamp.c | |
4 | * Author: Javier Herrero <jherrero@hvsistemas.es> | |
5 | * | |
6 | * Created: 2007 | |
7 | * Description: Board Info File for the HV Sistemas H8606 board | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
11 | * Copyright 2004-2006 Analog Devices Inc | |
45138439 | 12 | * Copyright 2007,2008 HV Sistemas S.L. |
ab472a04 JH |
13 | * |
14 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
15 | * | |
16 | * This program is free software; you can redistribute it and/or modify | |
17 | * it under the terms of the GNU General Public License as published by | |
18 | * the Free Software Foundation; either version 2 of the License, or | |
19 | * (at your option) any later version. | |
20 | * | |
21 | * This program is distributed in the hope that it will be useful, | |
22 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
23 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
24 | * GNU General Public License for more details. | |
25 | * | |
26 | * You should have received a copy of the GNU General Public License | |
27 | * along with this program; if not, see the file COPYING, or write | |
28 | * to the Free Software Foundation, Inc., | |
29 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
30 | */ | |
31 | ||
32 | #include <linux/device.h> | |
33 | #include <linux/platform_device.h> | |
34 | #include <linux/mtd/mtd.h> | |
35 | #include <linux/mtd/partitions.h> | |
36 | #include <linux/spi/spi.h> | |
37 | #include <linux/spi/flash.h> | |
38 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
f02bcec5 | 39 | #include <linux/usb/isp1362.h> |
ab472a04 | 40 | #endif |
ab472a04 | 41 | #include <linux/irq.h> |
fb96c56d | 42 | |
ab472a04 JH |
43 | #include <asm/dma.h> |
44 | #include <asm/bfin5xx_spi.h> | |
45 | #include <asm/reboot.h> | |
5d448dd5 | 46 | #include <asm/portmux.h> |
ab472a04 JH |
47 | |
48 | /* | |
49 | * Name the Board for the /proc/cpuinfo | |
50 | */ | |
51 | const char bfin_board_name[] = "HV Sistemas H8606"; | |
52 | ||
09db9487 | 53 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) |
ab472a04 JH |
54 | static struct platform_device rtc_device = { |
55 | .name = "rtc-bfin", | |
56 | .id = -1, | |
57 | }; | |
58 | #endif | |
59 | ||
60 | /* | |
61 | * Driver needs to know address, irq and flag pin. | |
62 | */ | |
63 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
64 | static struct resource dm9000_resources[] = { | |
65 | [0] = { | |
66 | .start = 0x20300000, | |
45138439 | 67 | .end = 0x20300002, |
ab472a04 JH |
68 | .flags = IORESOURCE_MEM, |
69 | }, | |
70 | [1] = { | |
45138439 JH |
71 | .start = 0x20300004, |
72 | .end = 0x20300006, | |
da3854fc LP |
73 | .flags = IORESOURCE_MEM, |
74 | }, | |
75 | [2] = { | |
ab472a04 JH |
76 | .start = IRQ_PF10, |
77 | .end = IRQ_PF10, | |
45138439 | 78 | .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IRQF_SHARED | IRQF_TRIGGER_HIGH), |
ab472a04 JH |
79 | }, |
80 | }; | |
81 | ||
82 | static struct platform_device dm9000_device = { | |
83 | .id = 0, | |
84 | .name = "dm9000", | |
85 | .resource = dm9000_resources, | |
86 | .num_resources = ARRAY_SIZE(dm9000_resources), | |
87 | }; | |
88 | #endif | |
89 | ||
90 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
91 | static struct resource smc91x_resources[] = { | |
92 | { | |
93 | .name = "smc91x-regs", | |
94 | .start = 0x20300300, | |
95 | .end = 0x20300300 + 16, | |
96 | .flags = IORESOURCE_MEM, | |
97 | }, { | |
98 | .start = IRQ_PROG_INTB, | |
99 | .end = IRQ_PROG_INTB, | |
100 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
101 | }, { | |
ab472a04 JH |
102 | .start = IRQ_PF7, |
103 | .end = IRQ_PF7, | |
104 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
105 | }, | |
106 | }; | |
107 | ||
108 | static struct platform_device smc91x_device = { | |
109 | .name = "smc91x", | |
110 | .id = 0, | |
111 | .num_resources = ARRAY_SIZE(smc91x_resources), | |
112 | .resource = smc91x_resources, | |
113 | }; | |
114 | #endif | |
115 | ||
116 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
117 | static struct resource net2272_bfin_resources[] = { | |
118 | { | |
119 | .start = 0x20300000, | |
120 | .end = 0x20300000 + 0x100, | |
121 | .flags = IORESOURCE_MEM, | |
122 | }, { | |
123 | .start = IRQ_PF10, | |
124 | .end = IRQ_PF10, | |
125 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
126 | }, | |
127 | }; | |
128 | ||
129 | static struct platform_device net2272_bfin_device = { | |
130 | .name = "net2272", | |
131 | .id = -1, | |
132 | .num_resources = ARRAY_SIZE(net2272_bfin_resources), | |
133 | .resource = net2272_bfin_resources, | |
134 | }; | |
135 | #endif | |
136 | ||
137 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
138 | /* all SPI peripherals info goes here */ | |
139 | ||
140 | #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) | |
141 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
142 | { | |
45138439 JH |
143 | .name = "bootloader (spi)", |
144 | .size = 0x40000, | |
ab472a04 JH |
145 | .offset = 0, |
146 | .mask_flags = MTD_CAP_ROM | |
147 | }, { | |
45138439 JH |
148 | .name = "fpga (spi)", |
149 | .size = 0x30000, | |
150 | .offset = 0x40000 | |
ab472a04 | 151 | }, { |
45138439 JH |
152 | .name = "linux kernel (spi)", |
153 | .size = 0x150000, | |
154 | .offset = 0x70000 | |
155 | }, { | |
156 | .name = "jffs2 root file system (spi)", | |
157 | .size = 0x640000, | |
158 | .offset = 0x1c0000, | |
ab472a04 JH |
159 | } |
160 | }; | |
161 | ||
162 | static struct flash_platform_data bfin_spi_flash_data = { | |
163 | .name = "m25p80", | |
164 | .parts = bfin_spi_flash_partitions, | |
165 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
166 | .type = "m25p64", | |
167 | }; | |
168 | ||
169 | /* SPI flash chip (m25p64) */ | |
170 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
171 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
172 | .bits_per_word = 8, | |
173 | }; | |
174 | #endif | |
175 | ||
176 | #if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
177 | /* SPI ADC chip */ | |
178 | static struct bfin5xx_spi_chip spi_adc_chip_info = { | |
179 | .ctl_reg = 0x1000, | |
180 | .enable_dma = 1, /* use dma transfer with this chip*/ | |
181 | .bits_per_word = 16, | |
182 | }; | |
183 | #endif | |
184 | ||
185 | #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
186 | static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |
187 | .ctl_reg = 0x1000, | |
188 | .enable_dma = 0, | |
189 | .bits_per_word = 16, | |
190 | }; | |
191 | #endif | |
192 | ||
193 | #if defined(CONFIG_PBX) | |
194 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | |
195 | .ctl_reg = 0x1c04, | |
196 | .enable_dma = 0, | |
197 | .bits_per_word = 8, | |
198 | .cs_change_per_word = 1, | |
199 | }; | |
200 | #endif | |
201 | ||
202 | /* Notice: for blackfin, the speed_hz is the value of register | |
203 | * SPI_BAUD, not the real baudrate */ | |
204 | static struct spi_board_info bfin_spi_board_info[] __initdata = { | |
205 | #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) | |
206 | { | |
207 | /* the modalias must be the same as spi device driver name */ | |
208 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
209 | /* this value is the baudrate divisor */ | |
210 | .max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */ | |
211 | .bus_num = 0, /* Framework bus number */ | |
212 | .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ | |
213 | .platform_data = &bfin_spi_flash_data, | |
214 | .controller_data = &spi_flash_chip_info, | |
215 | .mode = SPI_MODE_3, | |
216 | }, | |
217 | #endif | |
218 | ||
219 | #if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
220 | { | |
221 | .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ | |
222 | .max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */ | |
223 | .bus_num = 1, /* Framework bus number */ | |
224 | .chip_select = 1, /* Framework chip select. */ | |
225 | .platform_data = NULL, /* No spi_driver specific config */ | |
226 | .controller_data = &spi_adc_chip_info, | |
227 | }, | |
228 | #endif | |
229 | ||
230 | #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
231 | { | |
232 | .modalias = "ad1836-spi", | |
233 | .max_speed_hz = 16, | |
234 | .bus_num = 1, | |
235 | .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, | |
236 | .controller_data = &ad1836_spi_chip_info, | |
237 | }, | |
238 | #endif | |
239 | ||
240 | #if defined(CONFIG_PBX) | |
241 | { | |
242 | .modalias = "fxs-spi", | |
243 | .max_speed_hz = 4, | |
244 | .bus_num = 1, | |
245 | .chip_select = 3, | |
246 | .controller_data = &spi_si3xxx_chip_info, | |
247 | }, | |
248 | ||
249 | { | |
250 | .modalias = "fxo-spi", | |
251 | .max_speed_hz = 4, | |
252 | .bus_num = 1, | |
253 | .chip_select = 2, | |
254 | .controller_data = &spi_si3xxx_chip_info, | |
255 | }, | |
256 | #endif | |
257 | }; | |
258 | ||
259 | /* SPI (0) */ | |
260 | static struct resource bfin_spi0_resource[] = { | |
261 | [0] = { | |
262 | .start = SPI0_REGBASE, | |
263 | .end = SPI0_REGBASE + 0xFF, | |
264 | .flags = IORESOURCE_MEM, | |
265 | }, | |
266 | [1] = { | |
267 | .start = CH_SPI, | |
268 | .end = CH_SPI, | |
269 | .flags = IORESOURCE_IRQ, | |
270 | } | |
271 | }; | |
272 | ||
273 | ||
274 | /* SPI controller data */ | |
275 | static struct bfin5xx_spi_master bfin_spi0_info = { | |
276 | .num_chipselect = 8, | |
277 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
5d448dd5 | 278 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, |
ab472a04 JH |
279 | }; |
280 | ||
281 | static struct platform_device bfin_spi0_device = { | |
282 | .name = "bfin-spi", | |
283 | .id = 0, /* Bus number */ | |
284 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
285 | .resource = bfin_spi0_resource, | |
286 | .dev = { | |
287 | .platform_data = &bfin_spi0_info, /* Passed to driver */ | |
288 | }, | |
289 | }; | |
290 | #endif /* spi master and devices */ | |
291 | ||
292 | #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) | |
293 | static struct platform_device bfin_fb_device = { | |
294 | .name = "bf537-fb", | |
295 | }; | |
296 | #endif | |
297 | ||
298 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
299 | static struct resource bfin_uart_resources[] = { | |
300 | { | |
301 | .start = 0xFFC00400, | |
302 | .end = 0xFFC004FF, | |
303 | .flags = IORESOURCE_MEM, | |
304 | }, | |
305 | }; | |
306 | ||
307 | static struct platform_device bfin_uart_device = { | |
308 | .name = "bfin-uart", | |
309 | .id = 1, | |
310 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
311 | .resource = bfin_uart_resources, | |
312 | }; | |
313 | #endif | |
314 | ||
5be36d22 | 315 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
5be36d22 | 316 | #ifdef CONFIG_BFIN_SIR0 |
42bd8bcb | 317 | static struct resource bfin_sir0_resources[] = { |
5be36d22 GY |
318 | { |
319 | .start = 0xFFC00400, | |
320 | .end = 0xFFC004FF, | |
321 | .flags = IORESOURCE_MEM, | |
322 | }, | |
42bd8bcb GY |
323 | { |
324 | .start = IRQ_UART0_RX, | |
325 | .end = IRQ_UART0_RX+1, | |
326 | .flags = IORESOURCE_IRQ, | |
327 | }, | |
328 | { | |
329 | .start = CH_UART0_RX, | |
330 | .end = CH_UART0_RX+1, | |
331 | .flags = IORESOURCE_DMA, | |
332 | }, | |
5be36d22 GY |
333 | }; |
334 | ||
42bd8bcb | 335 | static struct platform_device bfin_sir0_device = { |
5be36d22 GY |
336 | .name = "bfin_sir", |
337 | .id = 0, | |
42bd8bcb GY |
338 | .num_resources = ARRAY_SIZE(bfin_sir0_resources), |
339 | .resource = bfin_sir0_resources, | |
5be36d22 GY |
340 | }; |
341 | #endif | |
42bd8bcb | 342 | #endif |
5be36d22 | 343 | |
fb96c56d JH |
344 | #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) |
345 | ||
346 | #include <linux/serial_8250.h> | |
347 | #include <linux/serial.h> | |
348 | ||
349 | /* | |
350 | * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010. | |
351 | * running at half system clock, both with interrupt output or-ed to PF8. Change to | |
352 | * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus | |
353 | */ | |
354 | ||
355 | static struct plat_serial8250_port serial8250_platform_data [] = { | |
356 | { | |
45138439 | 357 | .membase = (void *)0x20200000, |
fb96c56d JH |
358 | .mapbase = 0x20200000, |
359 | .irq = IRQ_PF8, | |
360 | .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, | |
361 | .iotype = UPIO_MEM, | |
362 | .regshift = 1, | |
363 | .uartclk = 66666667, | |
364 | }, { | |
45138439 | 365 | .membase = (void *)0x20200010, |
fb96c56d JH |
366 | .mapbase = 0x20200010, |
367 | .irq = IRQ_PF8, | |
368 | .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, | |
369 | .iotype = UPIO_MEM, | |
370 | .regshift = 1, | |
371 | .uartclk = 66666667, | |
372 | }, { | |
373 | } | |
374 | }; | |
375 | ||
376 | static struct platform_device serial8250_device = { | |
377 | .id = PLAT8250_DEV_PLATFORM, | |
378 | .name = "serial8250", | |
379 | .dev = { | |
380 | .platform_data = serial8250_platform_data, | |
381 | }, | |
382 | }; | |
383 | ||
384 | #endif | |
385 | ||
7a5f8191 JH |
386 | #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) |
387 | ||
388 | /* | |
389 | * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030, | |
390 | * interrupt output wired to PF9. Change to suit different FPGA configuration | |
391 | */ | |
392 | ||
393 | static struct resource opencores_kbd_resources[] = { | |
394 | [0] = { | |
395 | .start = 0x20200030, | |
396 | .end = 0x20300030 + 2, | |
397 | .flags = IORESOURCE_MEM, | |
398 | }, | |
399 | [1] = { | |
400 | .start = IRQ_PF9, | |
401 | .end = IRQ_PF9, | |
402 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, | |
403 | }, | |
404 | }; | |
405 | ||
406 | static struct platform_device opencores_kbd_device = { | |
407 | .id = -1, | |
408 | .name = "opencores-kbd", | |
409 | .resource = opencores_kbd_resources, | |
410 | .num_resources = ARRAY_SIZE(opencores_kbd_resources), | |
411 | }; | |
412 | #endif | |
413 | ||
fb96c56d | 414 | static struct platform_device *h8606_devices[] __initdata = { |
ab472a04 JH |
415 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) |
416 | &rtc_device, | |
417 | #endif | |
418 | ||
419 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
420 | &dm9000_device, | |
421 | #endif | |
422 | ||
423 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
424 | &smc91x_device, | |
425 | #endif | |
426 | ||
427 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
428 | &net2272_bfin_device, | |
429 | #endif | |
430 | ||
431 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
432 | &bfin_spi0_device, | |
433 | #endif | |
434 | ||
435 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
436 | &bfin_uart_device, | |
437 | #endif | |
fb96c56d JH |
438 | |
439 | #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) | |
440 | &serial8250_device, | |
441 | #endif | |
7a5f8191 | 442 | |
5be36d22 | 443 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
42bd8bcb GY |
444 | #ifdef CONFIG_BFIN_SIR0 |
445 | &bfin_sir0_device, | |
446 | #endif | |
5be36d22 GY |
447 | #endif |
448 | ||
7a5f8191 JH |
449 | #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) |
450 | &opencores_kbd_device, | |
451 | #endif | |
ab472a04 JH |
452 | }; |
453 | ||
454 | static int __init H8606_init(void) | |
455 | { | |
456 | printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); | |
b85d858b | 457 | printk(KERN_INFO "%s(): registering device resources\n", __func__); |
fb96c56d | 458 | platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); |
ab472a04 JH |
459 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) |
460 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); | |
461 | #endif | |
462 | return 0; | |
463 | } | |
464 | ||
0feea17f | 465 | arch_initcall(H8606_init); |