Commit | Line | Data |
---|---|---|
2b7eda63 MD |
1 | /* |
2 | * AP4EVB board support | |
3 | * | |
4 | * Copyright (C) 2010 Magnus Damm | |
5 | * Copyright (C) 2008 Yoshihiro Shimoda | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; version 2 of the License. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | */ | |
8eda2f21 | 20 | #include <linux/clk.h> |
2b7eda63 MD |
21 | #include <linux/kernel.h> |
22 | #include <linux/init.h> | |
23 | #include <linux/interrupt.h> | |
24 | #include <linux/irq.h> | |
25 | #include <linux/platform_device.h> | |
26 | #include <linux/delay.h> | |
69bf6f45 | 27 | #include <linux/mfd/sh_mobile_sdhi.h> |
410d878b | 28 | #include <linux/mfd/tmio.h> |
341291a6 | 29 | #include <linux/mmc/host.h> |
2b7eda63 MD |
30 | #include <linux/mtd/mtd.h> |
31 | #include <linux/mtd/partitions.h> | |
32 | #include <linux/mtd/physmap.h> | |
c8ee3d4b | 33 | #include <linux/mmc/sh_mmcif.h> |
91cf5082 KM |
34 | #include <linux/i2c.h> |
35 | #include <linux/i2c/tsc2007.h> | |
2b7eda63 | 36 | #include <linux/io.h> |
1b7e0677 | 37 | #include <linux/smsc911x.h> |
cb9215e1 KM |
38 | #include <linux/sh_intc.h> |
39 | #include <linux/sh_clk.h> | |
1b7e0677 | 40 | #include <linux/gpio.h> |
17ccb834 | 41 | #include <linux/input.h> |
2863e935 | 42 | #include <linux/leds.h> |
17ccb834 | 43 | #include <linux/input/sh_keysc.h> |
fb54d268 | 44 | #include <linux/usb/r8a66597.h> |
8eda2f21 | 45 | |
cb9215e1 KM |
46 | #include <sound/sh_fsi.h> |
47 | ||
dfbcdf64 | 48 | #include <video/sh_mobile_hdmi.h> |
8eda2f21 GL |
49 | #include <video/sh_mobile_lcdc.h> |
50 | #include <video/sh_mipi_dsi.h> | |
51 | ||
2b7eda63 | 52 | #include <mach/common.h> |
8eda2f21 | 53 | #include <mach/irqs.h> |
1b7e0677 | 54 | #include <mach/sh7372.h> |
8eda2f21 | 55 | |
2b7eda63 MD |
56 | #include <asm/mach-types.h> |
57 | #include <asm/mach/arch.h> | |
58 | #include <asm/mach/map.h> | |
495b3cea | 59 | #include <asm/mach/time.h> |
2b7eda63 | 60 | |
02624a17 KM |
61 | /* |
62 | * Address Interface BusWidth note | |
63 | * ------------------------------------------------------------------ | |
64 | * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON | |
65 | * 0x0800_0000 user area - | |
66 | * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF | |
67 | * 0x1400_0000 Ether (LAN9220) 16bit | |
68 | * 0x1600_0000 user area - cannot use with NAND | |
69 | * 0x1800_0000 user area - | |
70 | * 0x1A00_0000 - | |
71 | * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit | |
72 | */ | |
73 | ||
74 | /* | |
75 | * NOR Flash ROM | |
76 | * | |
77 | * SW1 | SW2 | SW7 | NOR Flash ROM | |
78 | * bit1 | bit1 bit2 | bit1 | Memory allocation | |
79 | * ------+------------+------+------------------ | |
80 | * OFF | ON OFF | ON | Area 0 | |
81 | * OFF | ON OFF | OFF | Area 4 | |
82 | */ | |
83 | ||
84 | /* | |
85 | * NAND Flash ROM | |
86 | * | |
87 | * SW1 | SW2 | SW7 | NAND Flash ROM | |
88 | * bit1 | bit1 bit2 | bit2 | Memory allocation | |
89 | * ------+------------+------+------------------ | |
90 | * OFF | ON OFF | ON | FCE 0 | |
91 | * OFF | ON OFF | OFF | FCE 1 | |
92 | */ | |
93 | ||
94 | /* | |
95 | * SMSC 9220 | |
96 | * | |
97 | * SW1 SMSC 9220 | |
98 | * ----------------------- | |
99 | * ON access disable | |
100 | * OFF access enable | |
101 | */ | |
102 | ||
17ccb834 | 103 | /* |
dda128dc | 104 | * LCD / IRQ / KEYSC / IrDA |
17ccb834 | 105 | * |
9fa1b7fe KM |
106 | * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen) |
107 | * LCD = 2nd LCDC (WVGA) | |
dda128dc KM |
108 | * |
109 | * | SW43 | | |
110 | * SW3 | ON | OFF | | |
111 | * -------------+-----------------------+---------------+ | |
112 | * ON | KEY / IrDA | LCD | | |
113 | * OFF | KEY / IrDA / IRQ | IRQ | | |
9fa1b7fe KM |
114 | * |
115 | * | |
116 | * QHD / WVGA display | |
117 | * | |
118 | * You can choice display type on menuconfig. | |
119 | * Then, check above dip-switch. | |
17ccb834 KM |
120 | */ |
121 | ||
fb54d268 KM |
122 | /* |
123 | * USB | |
124 | * | |
125 | * J7 : 1-2 MAX3355E VBUS | |
126 | * 2-3 DC 5.0V | |
127 | * | |
128 | * S39: bit2: off | |
129 | */ | |
130 | ||
cb9215e1 KM |
131 | /* |
132 | * FSI/FSMI | |
133 | * | |
134 | * SW41 : ON : SH-Mobile AP4 Audio Mode | |
135 | * : OFF : Bluetooth Audio Mode | |
136 | */ | |
137 | ||
c8ee3d4b | 138 | /* |
d3d03e48 | 139 | * MMC0/SDHI1 (CN7) |
c8ee3d4b | 140 | * |
d3d03e48 KM |
141 | * J22 : select card voltage |
142 | * 1-2 pin : 1.8v | |
143 | * 2-3 pin : 3.3v | |
144 | * | |
145 | * SW1 | SW33 | |
146 | * | bit1 | bit2 | bit3 | bit4 | |
147 | * ------------+------+------+------+------- | |
148 | * MMC0 OFF | OFF | ON | ON | X | |
149 | * SDHI1 OFF | ON | X | OFF | ON | |
150 | * | |
151 | * voltage lebel | |
152 | * CN7 : 1.8v | |
153 | * CN12: 3.3v | |
c8ee3d4b KM |
154 | */ |
155 | ||
1b7e0677 | 156 | /* MTD */ |
2b7eda63 MD |
157 | static struct mtd_partition nor_flash_partitions[] = { |
158 | { | |
159 | .name = "loader", | |
160 | .offset = 0x00000000, | |
161 | .size = 512 * 1024, | |
162 | }, | |
163 | { | |
164 | .name = "bootenv", | |
165 | .offset = MTDPART_OFS_APPEND, | |
166 | .size = 512 * 1024, | |
167 | }, | |
168 | { | |
169 | .name = "kernel_ro", | |
170 | .offset = MTDPART_OFS_APPEND, | |
171 | .size = 8 * 1024 * 1024, | |
172 | .mask_flags = MTD_WRITEABLE, | |
173 | }, | |
174 | { | |
175 | .name = "kernel", | |
176 | .offset = MTDPART_OFS_APPEND, | |
177 | .size = 8 * 1024 * 1024, | |
178 | }, | |
179 | { | |
180 | .name = "data", | |
181 | .offset = MTDPART_OFS_APPEND, | |
182 | .size = MTDPART_SIZ_FULL, | |
183 | }, | |
184 | }; | |
185 | ||
186 | static struct physmap_flash_data nor_flash_data = { | |
187 | .width = 2, | |
188 | .parts = nor_flash_partitions, | |
189 | .nr_parts = ARRAY_SIZE(nor_flash_partitions), | |
190 | }; | |
191 | ||
192 | static struct resource nor_flash_resources[] = { | |
193 | [0] = { | |
194 | .start = 0x00000000, | |
195 | .end = 0x08000000 - 1, | |
196 | .flags = IORESOURCE_MEM, | |
197 | } | |
198 | }; | |
199 | ||
200 | static struct platform_device nor_flash_device = { | |
201 | .name = "physmap-flash", | |
202 | .dev = { | |
203 | .platform_data = &nor_flash_data, | |
204 | }, | |
205 | .num_resources = ARRAY_SIZE(nor_flash_resources), | |
206 | .resource = nor_flash_resources, | |
207 | }; | |
208 | ||
1b7e0677 KM |
209 | /* SMSC 9220 */ |
210 | static struct resource smc911x_resources[] = { | |
211 | { | |
212 | .start = 0x14000000, | |
213 | .end = 0x16000000 - 1, | |
214 | .flags = IORESOURCE_MEM, | |
215 | }, { | |
33c9607a | 216 | .start = evt2irq(0x02c0) /* IRQ6A */, |
1b7e0677 KM |
217 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, |
218 | }, | |
219 | }; | |
220 | ||
221 | static struct smsc911x_platform_config smsc911x_info = { | |
222 | .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS, | |
223 | .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, | |
224 | .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, | |
225 | }; | |
226 | ||
227 | static struct platform_device smc911x_device = { | |
228 | .name = "smsc911x", | |
229 | .id = -1, | |
230 | .num_resources = ARRAY_SIZE(smc911x_resources), | |
231 | .resource = smc911x_resources, | |
232 | .dev = { | |
233 | .platform_data = &smsc911x_info, | |
234 | }, | |
235 | }; | |
2b7eda63 | 236 | |
c8ee3d4b KM |
237 | /* SH_MMCIF */ |
238 | static struct resource sh_mmcif_resources[] = { | |
239 | [0] = { | |
0fb0834b | 240 | .name = "MMCIF", |
c8ee3d4b KM |
241 | .start = 0xE6BD0000, |
242 | .end = 0xE6BD00FF, | |
243 | .flags = IORESOURCE_MEM, | |
244 | }, | |
245 | [1] = { | |
246 | /* MMC ERR */ | |
8d569341 | 247 | .start = evt2irq(0x1ac0), |
c8ee3d4b KM |
248 | .flags = IORESOURCE_IRQ, |
249 | }, | |
250 | [2] = { | |
251 | /* MMC NOR */ | |
8d569341 | 252 | .start = evt2irq(0x1ae0), |
c8ee3d4b KM |
253 | .flags = IORESOURCE_IRQ, |
254 | }, | |
255 | }; | |
256 | ||
bb04e197 | 257 | static struct sh_mmcif_plat_data sh_mmcif_plat = { |
c8ee3d4b KM |
258 | .sup_pclk = 0, |
259 | .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, | |
260 | .caps = MMC_CAP_4_BIT_DATA | | |
261 | MMC_CAP_8_BIT_DATA | | |
262 | MMC_CAP_NEEDS_POLL, | |
263 | }; | |
264 | ||
265 | static struct platform_device sh_mmcif_device = { | |
266 | .name = "sh_mmcif", | |
267 | .id = 0, | |
268 | .dev = { | |
269 | .dma_mask = NULL, | |
270 | .coherent_dma_mask = 0xffffffff, | |
271 | .platform_data = &sh_mmcif_plat, | |
272 | }, | |
273 | .num_resources = ARRAY_SIZE(sh_mmcif_resources), | |
274 | .resource = sh_mmcif_resources, | |
275 | }; | |
276 | ||
3a14d039 | 277 | /* SDHI0 */ |
69bf6f45 | 278 | static struct sh_mobile_sdhi_info sdhi0_info = { |
341291a6 GL |
279 | .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, |
280 | .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, | |
69bf6f45 GL |
281 | }; |
282 | ||
3a14d039 MD |
283 | static struct resource sdhi0_resources[] = { |
284 | [0] = { | |
285 | .name = "SDHI0", | |
286 | .start = 0xe6850000, | |
287 | .end = 0xe68501ff, | |
288 | .flags = IORESOURCE_MEM, | |
289 | }, | |
290 | [1] = { | |
33c9607a | 291 | .start = evt2irq(0x0e00) /* SDHI0 */, |
3a14d039 MD |
292 | .flags = IORESOURCE_IRQ, |
293 | }, | |
294 | }; | |
295 | ||
296 | static struct platform_device sdhi0_device = { | |
297 | .name = "sh_mobile_sdhi", | |
298 | .num_resources = ARRAY_SIZE(sdhi0_resources), | |
299 | .resource = sdhi0_resources, | |
300 | .id = 0, | |
69bf6f45 GL |
301 | .dev = { |
302 | .platform_data = &sdhi0_info, | |
303 | }, | |
3a14d039 MD |
304 | }; |
305 | ||
341291a6 GL |
306 | /* SDHI1 */ |
307 | static struct sh_mobile_sdhi_info sdhi1_info = { | |
308 | .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, | |
309 | .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, | |
310 | .tmio_ocr_mask = MMC_VDD_165_195, | |
410d878b | 311 | .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, |
341291a6 GL |
312 | }; |
313 | ||
314 | static struct resource sdhi1_resources[] = { | |
315 | [0] = { | |
316 | .name = "SDHI1", | |
317 | .start = 0xe6860000, | |
318 | .end = 0xe68601ff, | |
319 | .flags = IORESOURCE_MEM, | |
320 | }, | |
321 | [1] = { | |
322 | .start = evt2irq(0x0e80), | |
323 | .flags = IORESOURCE_IRQ, | |
324 | }, | |
325 | }; | |
326 | ||
327 | static struct platform_device sdhi1_device = { | |
328 | .name = "sh_mobile_sdhi", | |
329 | .num_resources = ARRAY_SIZE(sdhi1_resources), | |
330 | .resource = sdhi1_resources, | |
331 | .id = 1, | |
332 | .dev = { | |
333 | .platform_data = &sdhi1_info, | |
334 | }, | |
335 | }; | |
336 | ||
fb54d268 | 337 | /* USB1 */ |
bb04e197 | 338 | static void usb1_host_port_power(int port, int power) |
fb54d268 KM |
339 | { |
340 | if (!power) /* only power-on supported for now */ | |
341 | return; | |
342 | ||
343 | /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ | |
344 | __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); | |
345 | } | |
346 | ||
347 | static struct r8a66597_platdata usb1_host_data = { | |
348 | .on_chip = 1, | |
349 | .port_power = usb1_host_port_power, | |
350 | }; | |
351 | ||
352 | static struct resource usb1_host_resources[] = { | |
353 | [0] = { | |
354 | .name = "USBHS", | |
355 | .start = 0xE68B0000, | |
356 | .end = 0xE68B00E6 - 1, | |
357 | .flags = IORESOURCE_MEM, | |
358 | }, | |
359 | [1] = { | |
33c9607a | 360 | .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, |
fb54d268 KM |
361 | .flags = IORESOURCE_IRQ, |
362 | }, | |
363 | }; | |
364 | ||
365 | static struct platform_device usb1_host_device = { | |
366 | .name = "r8a66597_hcd", | |
367 | .id = 1, | |
368 | .dev = { | |
369 | .dma_mask = NULL, /* not use dma */ | |
370 | .coherent_dma_mask = 0xffffffff, | |
371 | .platform_data = &usb1_host_data, | |
372 | }, | |
373 | .num_resources = ARRAY_SIZE(usb1_host_resources), | |
374 | .resource = usb1_host_resources, | |
375 | }; | |
376 | ||
44432407 GL |
377 | const static struct fb_videomode ap4evb_lcdc_modes[] = { |
378 | { | |
379 | #ifdef CONFIG_AP4EVB_QHD | |
380 | .name = "R63302(QHD)", | |
381 | .xres = 544, | |
382 | .yres = 961, | |
383 | .left_margin = 72, | |
384 | .right_margin = 600, | |
385 | .hsync_len = 16, | |
386 | .upper_margin = 8, | |
387 | .lower_margin = 8, | |
388 | .vsync_len = 2, | |
389 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, | |
390 | #else | |
391 | .name = "WVGA Panel", | |
392 | .xres = 800, | |
393 | .yres = 480, | |
394 | .left_margin = 220, | |
395 | .right_margin = 110, | |
396 | .hsync_len = 70, | |
397 | .upper_margin = 20, | |
398 | .lower_margin = 5, | |
399 | .vsync_len = 5, | |
400 | .sync = 0, | |
401 | #endif | |
402 | }, | |
403 | }; | |
404 | ||
9fa1b7fe | 405 | static struct sh_mobile_lcdc_info lcdc_info = { |
8eda2f21 GL |
406 | .ch[0] = { |
407 | .chan = LCDC_CHAN_MAINLCD, | |
408 | .bpp = 16, | |
44432407 GL |
409 | .lcd_cfg = ap4evb_lcdc_modes, |
410 | .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), | |
8eda2f21 GL |
411 | } |
412 | }; | |
413 | ||
414 | static struct resource lcdc_resources[] = { | |
415 | [0] = { | |
416 | .name = "LCDC", | |
417 | .start = 0xfe940000, /* P4-only space */ | |
418 | .end = 0xfe943fff, | |
419 | .flags = IORESOURCE_MEM, | |
420 | }, | |
421 | [1] = { | |
422 | .start = intcs_evt2irq(0x580), | |
423 | .flags = IORESOURCE_IRQ, | |
424 | }, | |
425 | }; | |
426 | ||
427 | static struct platform_device lcdc_device = { | |
428 | .name = "sh_mobile_lcdc_fb", | |
429 | .num_resources = ARRAY_SIZE(lcdc_resources), | |
430 | .resource = lcdc_resources, | |
431 | .dev = { | |
9fa1b7fe | 432 | .platform_data = &lcdc_info, |
8eda2f21 GL |
433 | .coherent_dma_mask = ~0, |
434 | }, | |
435 | }; | |
436 | ||
9fa1b7fe KM |
437 | /* |
438 | * QHD display | |
439 | */ | |
440 | #ifdef CONFIG_AP4EVB_QHD | |
441 | ||
442 | /* KEYSC (Needs SW43 set to ON) */ | |
443 | static struct sh_keysc_info keysc_info = { | |
444 | .mode = SH_KEYSC_MODE_1, | |
445 | .scan_timing = 3, | |
446 | .delay = 2500, | |
447 | .keycodes = { | |
448 | KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, | |
449 | KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, | |
450 | KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, | |
451 | KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, | |
452 | KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, | |
453 | }, | |
454 | }; | |
455 | ||
456 | static struct resource keysc_resources[] = { | |
457 | [0] = { | |
458 | .name = "KEYSC", | |
459 | .start = 0xe61b0000, | |
460 | .end = 0xe61b0063, | |
461 | .flags = IORESOURCE_MEM, | |
462 | }, | |
463 | [1] = { | |
464 | .start = evt2irq(0x0be0), /* KEYSC_KEY */ | |
465 | .flags = IORESOURCE_IRQ, | |
466 | }, | |
467 | }; | |
468 | ||
469 | static struct platform_device keysc_device = { | |
470 | .name = "sh_keysc", | |
471 | .id = 0, /* "keysc0" clock */ | |
472 | .num_resources = ARRAY_SIZE(keysc_resources), | |
473 | .resource = keysc_resources, | |
474 | .dev = { | |
475 | .platform_data = &keysc_info, | |
476 | }, | |
477 | }; | |
478 | ||
479 | /* MIPI-DSI */ | |
8eda2f21 GL |
480 | static struct resource mipidsi0_resources[] = { |
481 | [0] = { | |
482 | .start = 0xffc60000, | |
483 | .end = 0xffc68fff, | |
484 | .flags = IORESOURCE_MEM, | |
485 | }, | |
486 | }; | |
487 | ||
488 | static struct sh_mipi_dsi_info mipidsi0_info = { | |
489 | .data_format = MIPI_RGB888, | |
9fa1b7fe | 490 | .lcd_chan = &lcdc_info.ch[0], |
8eda2f21 GL |
491 | }; |
492 | ||
493 | static struct platform_device mipidsi0_device = { | |
494 | .name = "sh-mipi-dsi", | |
495 | .num_resources = ARRAY_SIZE(mipidsi0_resources), | |
496 | .resource = mipidsi0_resources, | |
497 | .id = 0, | |
498 | .dev = { | |
499 | .platform_data = &mipidsi0_info, | |
500 | }, | |
501 | }; | |
502 | ||
9fa1b7fe KM |
503 | /* This function will disappear when we switch to (runtime) PM */ |
504 | static int __init ap4evb_init_display_clk(void) | |
505 | { | |
506 | struct clk *lcdc_clk; | |
507 | struct clk *dsitx_clk; | |
508 | int ret; | |
509 | ||
510 | lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0"); | |
511 | if (IS_ERR(lcdc_clk)) | |
512 | return PTR_ERR(lcdc_clk); | |
513 | ||
514 | dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0"); | |
515 | if (IS_ERR(dsitx_clk)) { | |
516 | ret = PTR_ERR(dsitx_clk); | |
517 | goto eclkdsitxget; | |
518 | } | |
519 | ||
520 | ret = clk_enable(lcdc_clk); | |
521 | if (ret < 0) | |
522 | goto eclklcdcon; | |
523 | ||
524 | ret = clk_enable(dsitx_clk); | |
525 | if (ret < 0) | |
526 | goto eclkdsitxon; | |
527 | ||
528 | return 0; | |
529 | ||
530 | eclkdsitxon: | |
531 | clk_disable(lcdc_clk); | |
532 | eclklcdcon: | |
533 | clk_put(dsitx_clk); | |
534 | eclkdsitxget: | |
535 | clk_put(lcdc_clk); | |
536 | ||
537 | return ret; | |
538 | } | |
539 | device_initcall(ap4evb_init_display_clk); | |
540 | ||
541 | static struct platform_device *qhd_devices[] __initdata = { | |
542 | &mipidsi0_device, | |
543 | &keysc_device, | |
544 | }; | |
545 | #endif /* CONFIG_AP4EVB_QHD */ | |
546 | ||
cb9215e1 KM |
547 | /* FSI */ |
548 | #define IRQ_FSI evt2irq(0x1840) | |
549 | #define FSIACKCR 0xE6150018 | |
550 | static void fsiackcr_init(struct clk *clk) | |
551 | { | |
552 | u32 status = __raw_readl(clk->enable_reg); | |
553 | ||
554 | /* use external clock */ | |
555 | status &= ~0x000000ff; | |
556 | status |= 0x00000080; | |
557 | __raw_writel(status, clk->enable_reg); | |
558 | } | |
559 | ||
560 | static struct clk_ops fsiackcr_clk_ops = { | |
561 | .init = fsiackcr_init, | |
562 | }; | |
563 | ||
564 | static struct clk fsiackcr_clk = { | |
565 | .ops = &fsiackcr_clk_ops, | |
566 | .enable_reg = (void __iomem *)FSIACKCR, | |
567 | .rate = 0, /* unknown */ | |
568 | }; | |
569 | ||
bb04e197 | 570 | static struct sh_fsi_platform_info fsi_info = { |
cb9215e1 KM |
571 | .porta_flags = SH_FSI_BRS_INV | |
572 | SH_FSI_OUT_SLAVE_MODE | | |
573 | SH_FSI_IN_SLAVE_MODE | | |
574 | SH_FSI_OFMT(PCM) | | |
575 | SH_FSI_IFMT(PCM), | |
576 | }; | |
577 | ||
578 | static struct resource fsi_resources[] = { | |
579 | [0] = { | |
580 | .name = "FSI", | |
581 | .start = 0xFE3C0000, | |
582 | .end = 0xFE3C0400 - 1, | |
583 | .flags = IORESOURCE_MEM, | |
584 | }, | |
585 | [1] = { | |
586 | .start = IRQ_FSI, | |
587 | .flags = IORESOURCE_IRQ, | |
588 | }, | |
589 | }; | |
590 | ||
591 | static struct platform_device fsi_device = { | |
592 | .name = "sh_fsi2", | |
9f6f11b6 | 593 | .id = -1, |
cb9215e1 KM |
594 | .num_resources = ARRAY_SIZE(fsi_resources), |
595 | .resource = fsi_resources, | |
596 | .dev = { | |
597 | .platform_data = &fsi_info, | |
598 | }, | |
599 | }; | |
600 | ||
a91a2d06 GL |
601 | /* |
602 | * If left and right margins are not multiples of 8, | |
603 | * LDHAJR will be adjusted accordingly by the LCDC | |
604 | * driver. Until we start using EDID, these values | |
605 | * might have to be adjusted for different monitors. | |
606 | */ | |
44432407 GL |
607 | const static struct fb_videomode ap4evb_hdmi_modes[] = { |
608 | { | |
609 | .name = "HDMI 720p", | |
610 | .xres = 1280, | |
611 | .yres = 720, | |
612 | ||
44432407 GL |
613 | .left_margin = 200, |
614 | .right_margin = 88, | |
615 | .hsync_len = 48, | |
616 | ||
617 | .upper_margin = 20, | |
618 | .lower_margin = 5, | |
619 | .vsync_len = 5, | |
620 | ||
621 | .pixclock = 13468, | |
622 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, | |
a91a2d06 GL |
623 | }, { |
624 | .name = "1280x1024", | |
625 | .xres = 1280, | |
626 | .yres = 1024, | |
627 | ||
628 | .left_margin = 144, | |
629 | .right_margin = 48, | |
630 | .hsync_len = 64, | |
631 | ||
632 | .upper_margin = 35, | |
633 | .lower_margin = 5, | |
634 | .vsync_len = 3, | |
635 | ||
636 | .pixclock = 9800, | |
637 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, | |
638 | }, { | |
639 | .name = "HDMI 480p", | |
640 | .xres = 720, | |
641 | .yres = 480, | |
642 | ||
643 | .left_margin = 36, | |
644 | .right_margin = 18, | |
645 | .hsync_len = 68, | |
646 | ||
647 | .upper_margin = 36, | |
648 | .lower_margin = 3, | |
649 | .vsync_len = 6, | |
650 | .pixclock = 37037, | |
651 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, | |
44432407 GL |
652 | }, |
653 | }; | |
654 | ||
dfbcdf64 GL |
655 | static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { |
656 | .clock_source = LCDC_CLK_EXTERNAL, | |
657 | .ch[0] = { | |
658 | .chan = LCDC_CHAN_MAINLCD, | |
659 | .bpp = 16, | |
660 | .interface_type = RGB24, | |
661 | .clock_divider = 1, | |
662 | .flags = LCDC_FLAGS_DWPOL, | |
44432407 GL |
663 | .lcd_cfg = ap4evb_hdmi_modes, |
664 | .num_cfg = ARRAY_SIZE(ap4evb_hdmi_modes), | |
dfbcdf64 GL |
665 | } |
666 | }; | |
667 | ||
668 | static struct resource lcdc1_resources[] = { | |
669 | [0] = { | |
670 | .name = "LCDC1", | |
671 | .start = 0xfe944000, | |
672 | .end = 0xfe947fff, | |
673 | .flags = IORESOURCE_MEM, | |
674 | }, | |
675 | [1] = { | |
676 | .start = intcs_evt2irq(0x17a0), | |
677 | .flags = IORESOURCE_IRQ, | |
678 | }, | |
679 | }; | |
680 | ||
681 | static struct platform_device lcdc1_device = { | |
682 | .name = "sh_mobile_lcdc_fb", | |
683 | .num_resources = ARRAY_SIZE(lcdc1_resources), | |
684 | .resource = lcdc1_resources, | |
685 | .id = 1, | |
686 | .dev = { | |
687 | .platform_data = &sh_mobile_lcdc1_info, | |
688 | .coherent_dma_mask = ~0, | |
689 | }, | |
690 | }; | |
691 | ||
692 | static struct sh_mobile_hdmi_info hdmi_info = { | |
693 | .lcd_chan = &sh_mobile_lcdc1_info.ch[0], | |
694 | .lcd_dev = &lcdc1_device.dev, | |
695 | }; | |
696 | ||
697 | static struct resource hdmi_resources[] = { | |
698 | [0] = { | |
699 | .name = "HDMI", | |
700 | .start = 0xe6be0000, | |
701 | .end = 0xe6be00ff, | |
702 | .flags = IORESOURCE_MEM, | |
703 | }, | |
704 | [1] = { | |
705 | /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ | |
706 | .start = evt2irq(0x17e0), | |
707 | .flags = IORESOURCE_IRQ, | |
708 | }, | |
709 | }; | |
710 | ||
711 | static struct platform_device hdmi_device = { | |
712 | .name = "sh-mobile-hdmi", | |
713 | .num_resources = ARRAY_SIZE(hdmi_resources), | |
714 | .resource = hdmi_resources, | |
715 | .id = -1, | |
716 | .dev = { | |
717 | .platform_data = &hdmi_info, | |
718 | }, | |
719 | }; | |
720 | ||
2863e935 AH |
721 | static struct gpio_led ap4evb_leds[] = { |
722 | { | |
723 | .name = "led4", | |
724 | .gpio = GPIO_PORT185, | |
725 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
726 | }, | |
727 | { | |
728 | .name = "led2", | |
729 | .gpio = GPIO_PORT186, | |
730 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
731 | }, | |
732 | { | |
733 | .name = "led3", | |
734 | .gpio = GPIO_PORT187, | |
735 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
736 | }, | |
737 | { | |
738 | .name = "led1", | |
739 | .gpio = GPIO_PORT188, | |
740 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
741 | } | |
742 | }; | |
743 | ||
744 | static struct gpio_led_platform_data ap4evb_leds_pdata = { | |
745 | .num_leds = ARRAY_SIZE(ap4evb_leds), | |
8050fbf2 | 746 | .leds = ap4evb_leds, |
2863e935 AH |
747 | }; |
748 | ||
749 | static struct platform_device leds_device = { | |
750 | .name = "leds-gpio", | |
751 | .id = 0, | |
752 | .dev = { | |
753 | .platform_data = &ap4evb_leds_pdata, | |
754 | }, | |
755 | }; | |
756 | ||
2b7eda63 | 757 | static struct platform_device *ap4evb_devices[] __initdata = { |
2863e935 | 758 | &leds_device, |
2b7eda63 | 759 | &nor_flash_device, |
1b7e0677 | 760 | &smc911x_device, |
3a14d039 | 761 | &sdhi0_device, |
341291a6 | 762 | &sdhi1_device, |
fb54d268 | 763 | &usb1_host_device, |
cb9215e1 | 764 | &fsi_device, |
beccb12f | 765 | &sh_mmcif_device, |
dfbcdf64 GL |
766 | &lcdc1_device, |
767 | &lcdc_device, | |
768 | &hdmi_device, | |
2b7eda63 MD |
769 | }; |
770 | ||
dfbcdf64 GL |
771 | static int __init hdmi_init_pm_clock(void) |
772 | { | |
773 | struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); | |
774 | int ret; | |
775 | long rate; | |
776 | ||
777 | if (IS_ERR(hdmi_ick)) { | |
778 | ret = PTR_ERR(hdmi_ick); | |
779 | pr_err("Cannot get HDMI ICK: %d\n", ret); | |
780 | goto out; | |
781 | } | |
782 | ||
783 | ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk); | |
784 | if (ret < 0) { | |
785 | pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount); | |
786 | goto out; | |
787 | } | |
788 | ||
789 | pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk)); | |
790 | ||
791 | rate = clk_round_rate(&pllc2_clk, 594000000); | |
792 | if (rate < 0) { | |
793 | pr_err("Cannot get suitable rate: %ld\n", rate); | |
794 | ret = rate; | |
795 | goto out; | |
796 | } | |
797 | ||
798 | ret = clk_set_rate(&pllc2_clk, rate); | |
799 | if (ret < 0) { | |
800 | pr_err("Cannot set rate %ld: %d\n", rate, ret); | |
801 | goto out; | |
802 | } | |
803 | ||
804 | pr_debug("PLLC2 set frequency %lu\n", rate); | |
805 | ||
806 | ret = clk_set_parent(hdmi_ick, &pllc2_clk); | |
807 | if (ret < 0) { | |
808 | pr_err("Cannot set HDMI parent: %d\n", ret); | |
809 | goto out; | |
810 | } | |
811 | ||
812 | out: | |
813 | if (!IS_ERR(hdmi_ick)) | |
814 | clk_put(hdmi_ick); | |
815 | return ret; | |
816 | } | |
817 | ||
818 | device_initcall(hdmi_init_pm_clock); | |
819 | ||
71c3ba9a KM |
820 | /* |
821 | * FIXME !! | |
822 | * | |
823 | * gpio_no_direction | |
71c3ba9a KM |
824 | * are quick_hack. |
825 | * | |
826 | * current gpio frame work doesn't have | |
827 | * the method to control only pull up/down/free. | |
828 | * this function should be replaced by correct gpio function | |
829 | */ | |
830 | static void __init gpio_no_direction(u32 addr) | |
831 | { | |
832 | __raw_writeb(0x00, addr); | |
833 | } | |
834 | ||
9fa1b7fe | 835 | /* TouchScreen */ |
52d5ac00 KM |
836 | #ifdef CONFIG_AP4EVB_QHD |
837 | # define GPIO_TSC_IRQ GPIO_FN_IRQ28_123 | |
838 | # define GPIO_TSC_PORT GPIO_PORT123 | |
839 | #else /* WVGA */ | |
840 | # define GPIO_TSC_IRQ GPIO_FN_IRQ7_40 | |
841 | # define GPIO_TSC_PORT GPIO_PORT40 | |
842 | #endif | |
843 | ||
33c9607a | 844 | #define IRQ28 evt2irq(0x3380) /* IRQ28A */ |
9fa1b7fe | 845 | #define IRQ7 evt2irq(0x02e0) /* IRQ7A */ |
52d5ac00 KM |
846 | static int ts_get_pendown_state(void) |
847 | { | |
848 | int val; | |
849 | ||
850 | gpio_free(GPIO_TSC_IRQ); | |
851 | ||
852 | gpio_request(GPIO_TSC_PORT, NULL); | |
853 | ||
854 | gpio_direction_input(GPIO_TSC_PORT); | |
855 | ||
856 | val = gpio_get_value(GPIO_TSC_PORT); | |
857 | ||
858 | gpio_request(GPIO_TSC_IRQ, NULL); | |
859 | ||
860 | return !val; | |
861 | } | |
862 | ||
863 | static int ts_init(void) | |
864 | { | |
865 | gpio_request(GPIO_TSC_IRQ, NULL); | |
866 | ||
867 | return 0; | |
868 | } | |
869 | ||
bb04e197 | 870 | static struct tsc2007_platform_data tsc2007_info = { |
91cf5082 | 871 | .model = 2007, |
52d5ac00 KM |
872 | .x_plate_ohms = 180, |
873 | .get_pendown_state = ts_get_pendown_state, | |
874 | .init_platform_hw = ts_init, | |
91cf5082 KM |
875 | }; |
876 | ||
9fa1b7fe KM |
877 | static struct i2c_board_info tsc_device = { |
878 | I2C_BOARD_INFO("tsc2007", 0x48), | |
879 | .type = "tsc2007", | |
880 | .platform_data = &tsc2007_info, | |
881 | /*.irq is selected on ap4evb_init */ | |
882 | }; | |
883 | ||
91cf5082 | 884 | /* I2C */ |
cb9215e1 KM |
885 | static struct i2c_board_info i2c0_devices[] = { |
886 | { | |
887 | I2C_BOARD_INFO("ak4643", 0x13), | |
888 | }, | |
889 | }; | |
890 | ||
91cf5082 | 891 | static struct i2c_board_info i2c1_devices[] = { |
8fc883c2 KM |
892 | { |
893 | I2C_BOARD_INFO("r2025sd", 0x32), | |
894 | }, | |
91cf5082 KM |
895 | }; |
896 | ||
2b7eda63 MD |
897 | static struct map_desc ap4evb_io_desc[] __initdata = { |
898 | /* create a 1:1 entity map for 0xe6xxxxxx | |
899 | * used by CPGA, INTC and PFC. | |
900 | */ | |
901 | { | |
902 | .virtual = 0xe6000000, | |
903 | .pfn = __phys_to_pfn(0xe6000000), | |
904 | .length = 256 << 20, | |
905 | .type = MT_DEVICE_NONSHARED | |
906 | }, | |
907 | }; | |
908 | ||
909 | static void __init ap4evb_map_io(void) | |
910 | { | |
911 | iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); | |
912 | ||
495b3cea | 913 | /* setup early devices and console here as well */ |
2b7eda63 | 914 | sh7372_add_early_devices(); |
4ae04acb | 915 | shmobile_setup_console(); |
2b7eda63 MD |
916 | } |
917 | ||
cb9215e1 KM |
918 | #define GPIO_PORT9CR 0xE6051009 |
919 | #define GPIO_PORT10CR 0xE605100A | |
2b7eda63 MD |
920 | static void __init ap4evb_init(void) |
921 | { | |
dfbcdf64 | 922 | u32 srcr4; |
cb9215e1 KM |
923 | struct clk *clk; |
924 | ||
1b7e0677 KM |
925 | sh7372_pinmux_init(); |
926 | ||
b228b48e KM |
927 | /* enable SCIFA0 */ |
928 | gpio_request(GPIO_FN_SCIFA0_TXD, NULL); | |
929 | gpio_request(GPIO_FN_SCIFA0_RXD, NULL); | |
930 | ||
1b7e0677 KM |
931 | /* enable SMSC911X */ |
932 | gpio_request(GPIO_FN_CS5A, NULL); | |
933 | gpio_request(GPIO_FN_IRQ6_39, NULL); | |
934 | ||
8cb3a2eb KM |
935 | /* enable Debug switch (S6) */ |
936 | gpio_request(GPIO_PORT32, NULL); | |
937 | gpio_request(GPIO_PORT33, NULL); | |
938 | gpio_request(GPIO_PORT34, NULL); | |
939 | gpio_request(GPIO_PORT35, NULL); | |
940 | gpio_direction_input(GPIO_PORT32); | |
941 | gpio_direction_input(GPIO_PORT33); | |
942 | gpio_direction_input(GPIO_PORT34); | |
943 | gpio_direction_input(GPIO_PORT35); | |
944 | gpio_export(GPIO_PORT32, 0); | |
945 | gpio_export(GPIO_PORT33, 0); | |
946 | gpio_export(GPIO_PORT34, 0); | |
947 | gpio_export(GPIO_PORT35, 0); | |
948 | ||
3a14d039 MD |
949 | /* SDHI0 */ |
950 | gpio_request(GPIO_FN_SDHICD0, NULL); | |
951 | gpio_request(GPIO_FN_SDHIWP0, NULL); | |
952 | gpio_request(GPIO_FN_SDHICMD0, NULL); | |
953 | gpio_request(GPIO_FN_SDHICLK0, NULL); | |
954 | gpio_request(GPIO_FN_SDHID0_3, NULL); | |
955 | gpio_request(GPIO_FN_SDHID0_2, NULL); | |
956 | gpio_request(GPIO_FN_SDHID0_1, NULL); | |
957 | gpio_request(GPIO_FN_SDHID0_0, NULL); | |
958 | ||
9fa1b7fe KM |
959 | /* SDHI1 */ |
960 | gpio_request(GPIO_FN_SDHICMD1, NULL); | |
961 | gpio_request(GPIO_FN_SDHICLK1, NULL); | |
962 | gpio_request(GPIO_FN_SDHID1_3, NULL); | |
963 | gpio_request(GPIO_FN_SDHID1_2, NULL); | |
964 | gpio_request(GPIO_FN_SDHID1_1, NULL); | |
965 | gpio_request(GPIO_FN_SDHID1_0, NULL); | |
91cf5082 | 966 | |
c8ee3d4b KM |
967 | /* MMCIF */ |
968 | gpio_request(GPIO_FN_MMCD0_0, NULL); | |
969 | gpio_request(GPIO_FN_MMCD0_1, NULL); | |
970 | gpio_request(GPIO_FN_MMCD0_2, NULL); | |
971 | gpio_request(GPIO_FN_MMCD0_3, NULL); | |
972 | gpio_request(GPIO_FN_MMCD0_4, NULL); | |
973 | gpio_request(GPIO_FN_MMCD0_5, NULL); | |
974 | gpio_request(GPIO_FN_MMCD0_6, NULL); | |
975 | gpio_request(GPIO_FN_MMCD0_7, NULL); | |
976 | gpio_request(GPIO_FN_MMCCMD0, NULL); | |
977 | gpio_request(GPIO_FN_MMCCLK0, NULL); | |
978 | ||
fb54d268 KM |
979 | /* USB enable */ |
980 | gpio_request(GPIO_FN_VBUS0_1, NULL); | |
981 | gpio_request(GPIO_FN_IDIN_1_18, NULL); | |
982 | gpio_request(GPIO_FN_PWEN_1_115, NULL); | |
983 | gpio_request(GPIO_FN_OVCN_1_114, NULL); | |
984 | gpio_request(GPIO_FN_EXTLP_1, NULL); | |
985 | gpio_request(GPIO_FN_OVCN2_1, NULL); | |
986 | ||
987 | /* setup USB phy */ | |
988 | __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ | |
989 | ||
cb9215e1 KM |
990 | /* enable FSI2 */ |
991 | gpio_request(GPIO_FN_FSIAIBT, NULL); | |
992 | gpio_request(GPIO_FN_FSIAILR, NULL); | |
993 | gpio_request(GPIO_FN_FSIAISLD, NULL); | |
994 | gpio_request(GPIO_FN_FSIAOSLD, NULL); | |
995 | gpio_request(GPIO_PORT161, NULL); | |
996 | gpio_direction_output(GPIO_PORT161, 0); /* slave */ | |
997 | ||
998 | gpio_request(GPIO_PORT9, NULL); | |
999 | gpio_request(GPIO_PORT10, NULL); | |
1000 | gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ | |
1001 | gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ | |
1002 | ||
1003 | /* set SPU2 clock to 119.6 MHz */ | |
1004 | clk = clk_get(NULL, "spu_clk"); | |
2ae2b766 | 1005 | if (!IS_ERR(clk)) { |
cb9215e1 KM |
1006 | clk_set_rate(clk, clk_round_rate(clk, 119600000)); |
1007 | clk_put(clk); | |
1008 | } | |
1009 | ||
1010 | /* change parent of FSI A */ | |
1011 | clk = clk_get(NULL, "fsia_clk"); | |
2ae2b766 | 1012 | if (!IS_ERR(clk)) { |
cb9215e1 KM |
1013 | clk_register(&fsiackcr_clk); |
1014 | clk_set_parent(clk, &fsiackcr_clk); | |
1015 | clk_put(clk); | |
1016 | } | |
1017 | ||
1018 | /* | |
1019 | * set irq priority, to avoid sound chopping | |
1020 | * when NFS rootfs is used | |
1021 | * FSI(3) > SMSC911X(2) | |
1022 | */ | |
1023 | intc_set_priority(IRQ_FSI, 3); | |
1024 | ||
1025 | i2c_register_board_info(0, i2c0_devices, | |
1026 | ARRAY_SIZE(i2c0_devices)); | |
1027 | ||
1028 | i2c_register_board_info(1, i2c1_devices, | |
1029 | ARRAY_SIZE(i2c1_devices)); | |
1030 | ||
9fa1b7fe | 1031 | #ifdef CONFIG_AP4EVB_QHD |
dd8a61a7 | 1032 | |
9fa1b7fe | 1033 | /* |
dd8a61a7 MD |
1034 | * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and |
1035 | * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON. | |
9fa1b7fe KM |
1036 | */ |
1037 | ||
1038 | /* enable KEYSC */ | |
1039 | gpio_request(GPIO_FN_KEYOUT0, NULL); | |
1040 | gpio_request(GPIO_FN_KEYOUT1, NULL); | |
1041 | gpio_request(GPIO_FN_KEYOUT2, NULL); | |
1042 | gpio_request(GPIO_FN_KEYOUT3, NULL); | |
1043 | gpio_request(GPIO_FN_KEYOUT4, NULL); | |
1044 | gpio_request(GPIO_FN_KEYIN0_136, NULL); | |
1045 | gpio_request(GPIO_FN_KEYIN1_135, NULL); | |
1046 | gpio_request(GPIO_FN_KEYIN2_134, NULL); | |
1047 | gpio_request(GPIO_FN_KEYIN3_133, NULL); | |
1048 | gpio_request(GPIO_FN_KEYIN4, NULL); | |
1049 | ||
1050 | /* enable TouchScreen */ | |
9fa1b7fe KM |
1051 | set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); |
1052 | ||
1053 | tsc_device.irq = IRQ28; | |
1054 | i2c_register_board_info(1, &tsc_device, 1); | |
1055 | ||
1056 | /* LCDC0 */ | |
1057 | lcdc_info.clock_source = LCDC_CLK_PERIPHERAL; | |
1058 | lcdc_info.ch[0].interface_type = RGB24; | |
1059 | lcdc_info.ch[0].clock_divider = 1; | |
1060 | lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; | |
9fa1b7fe KM |
1061 | lcdc_info.ch[0].lcd_size_cfg.width = 44; |
1062 | lcdc_info.ch[0].lcd_size_cfg.height = 79; | |
1063 | ||
1064 | platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices)); | |
1065 | ||
1066 | #else | |
1067 | /* | |
dd8a61a7 MD |
1068 | * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and |
1069 | * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF. | |
9fa1b7fe | 1070 | */ |
dd8a61a7 | 1071 | |
9fa1b7fe KM |
1072 | gpio_request(GPIO_FN_LCDD17, NULL); |
1073 | gpio_request(GPIO_FN_LCDD16, NULL); | |
1074 | gpio_request(GPIO_FN_LCDD15, NULL); | |
1075 | gpio_request(GPIO_FN_LCDD14, NULL); | |
1076 | gpio_request(GPIO_FN_LCDD13, NULL); | |
1077 | gpio_request(GPIO_FN_LCDD12, NULL); | |
1078 | gpio_request(GPIO_FN_LCDD11, NULL); | |
1079 | gpio_request(GPIO_FN_LCDD10, NULL); | |
1080 | gpio_request(GPIO_FN_LCDD9, NULL); | |
1081 | gpio_request(GPIO_FN_LCDD8, NULL); | |
1082 | gpio_request(GPIO_FN_LCDD7, NULL); | |
1083 | gpio_request(GPIO_FN_LCDD6, NULL); | |
1084 | gpio_request(GPIO_FN_LCDD5, NULL); | |
1085 | gpio_request(GPIO_FN_LCDD4, NULL); | |
1086 | gpio_request(GPIO_FN_LCDD3, NULL); | |
1087 | gpio_request(GPIO_FN_LCDD2, NULL); | |
1088 | gpio_request(GPIO_FN_LCDD1, NULL); | |
1089 | gpio_request(GPIO_FN_LCDD0, NULL); | |
1090 | gpio_request(GPIO_FN_LCDDISP, NULL); | |
1091 | gpio_request(GPIO_FN_LCDDCK, NULL); | |
1092 | ||
1093 | gpio_request(GPIO_PORT189, NULL); /* backlight */ | |
1094 | gpio_direction_output(GPIO_PORT189, 1); | |
1095 | ||
1096 | gpio_request(GPIO_PORT151, NULL); /* LCDDON */ | |
1097 | gpio_direction_output(GPIO_PORT151, 1); | |
1098 | ||
1099 | lcdc_info.clock_source = LCDC_CLK_BUS; | |
1100 | lcdc_info.ch[0].interface_type = RGB18; | |
1101 | lcdc_info.ch[0].clock_divider = 2; | |
1102 | lcdc_info.ch[0].flags = 0; | |
9fa1b7fe KM |
1103 | lcdc_info.ch[0].lcd_size_cfg.width = 152; |
1104 | lcdc_info.ch[0].lcd_size_cfg.height = 91; | |
1105 | ||
1106 | /* enable TouchScreen */ | |
9fa1b7fe KM |
1107 | set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); |
1108 | ||
1109 | tsc_device.irq = IRQ7; | |
1110 | i2c_register_board_info(0, &tsc_device, 1); | |
1111 | #endif /* CONFIG_AP4EVB_QHD */ | |
341291a6 | 1112 | |
2b7eda63 MD |
1113 | sh7372_add_standard_devices(); |
1114 | ||
dfbcdf64 GL |
1115 | /* HDMI */ |
1116 | gpio_request(GPIO_FN_HDMI_HPD, NULL); | |
1117 | gpio_request(GPIO_FN_HDMI_CEC, NULL); | |
1118 | ||
1119 | /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ | |
1120 | #define SRCR4 0xe61580bc | |
1121 | srcr4 = __raw_readl(SRCR4); | |
1122 | __raw_writel(srcr4 | (1 << 13), SRCR4); | |
1123 | udelay(50); | |
1124 | __raw_writel(srcr4 & ~(1 << 13), SRCR4); | |
1125 | ||
2b7eda63 MD |
1126 | platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); |
1127 | } | |
1128 | ||
495b3cea MD |
1129 | static void __init ap4evb_timer_init(void) |
1130 | { | |
1131 | sh7372_clock_init(); | |
1132 | shmobile_timer.init(); | |
dfbcdf64 GL |
1133 | |
1134 | /* External clock source */ | |
1135 | clk_set_rate(&dv_clki_clk, 27000000); | |
495b3cea MD |
1136 | } |
1137 | ||
1138 | static struct sys_timer ap4evb_timer = { | |
1139 | .init = ap4evb_timer_init, | |
1140 | }; | |
1141 | ||
2b7eda63 MD |
1142 | MACHINE_START(AP4EVB, "ap4evb") |
1143 | .phys_io = 0xe6000000, | |
1144 | .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, | |
1145 | .map_io = ap4evb_map_io, | |
1146 | .init_irq = sh7372_init_irq, | |
1147 | .init_machine = ap4evb_init, | |
495b3cea | 1148 | .timer = &ap4evb_timer, |
2b7eda63 | 1149 | MACHINE_END |