Commit | Line | Data |
---|---|---|
3696a8a4 MR |
1 | /* |
2 | * linux/arch/arm/mach-pxa/cm-x270.c | |
3 | * | |
4 | * Copyright (C) 2007 CompuLab, Ltd. | |
5 | * Mike Rapoport <mike@compulab.co.il> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | ||
12 | #include <linux/types.h> | |
13 | #include <linux/pm.h> | |
14 | #include <linux/fb.h> | |
15 | #include <linux/platform_device.h> | |
16 | #include <linux/irq.h> | |
17 | #include <linux/sysdev.h> | |
18 | #include <linux/io.h> | |
19 | #include <linux/delay.h> | |
20 | ||
21 | #include <linux/dm9000.h> | |
22 | #include <linux/rtc-v3020.h> | |
23 | #include <linux/serial_8250.h> | |
24 | ||
25 | #include <video/mbxfb.h> | |
26 | ||
27 | #include <asm/mach/arch.h> | |
28 | #include <asm/mach-types.h> | |
29 | #include <asm/mach/map.h> | |
30 | ||
31 | #include <asm/arch/pxa-regs.h> | |
bb548dd4 | 32 | #include <asm/arch/pxa2xx-regs.h> |
3696a8a4 MR |
33 | #include <asm/arch/pxafb.h> |
34 | #include <asm/arch/ohci.h> | |
35 | #include <asm/arch/mmc.h> | |
36 | #include <asm/arch/bitfield.h> | |
37 | #include <asm/arch/cm-x270.h> | |
38 | ||
39 | #include <asm/hardware/it8152.h> | |
40 | ||
41 | #include "generic.h" | |
42 | #include "cm-x270-pci.h" | |
43 | ||
44 | #define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22)) | |
45 | #define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22)) | |
46 | ||
47 | static struct resource cmx270_dm9k_resource[] = { | |
48 | [0] = { | |
49 | .start = DM9000_PHYS_BASE, | |
50 | .end = DM9000_PHYS_BASE + 4, | |
51 | .flags = IORESOURCE_MEM, | |
52 | }, | |
53 | [1] = { | |
54 | .start = DM9000_PHYS_BASE + 8, | |
55 | .end = DM9000_PHYS_BASE + 8 + 500, | |
56 | .flags = IORESOURCE_MEM, | |
57 | }, | |
58 | [2] = { | |
59 | .start = CMX270_ETHIRQ, | |
60 | .end = CMX270_ETHIRQ, | |
61 | .flags = IORESOURCE_IRQ, | |
62 | } | |
63 | }; | |
64 | ||
65 | /* for the moment we limit ourselves to 32bit IO until some | |
66 | * better IO routines can be written and tested | |
67 | */ | |
68 | static struct dm9000_plat_data cmx270_dm9k_platdata = { | |
69 | .flags = DM9000_PLATF_32BITONLY, | |
70 | }; | |
71 | ||
72 | /* Ethernet device */ | |
73 | static struct platform_device cmx270_device_dm9k = { | |
74 | .name = "dm9000", | |
75 | .id = 0, | |
76 | .num_resources = ARRAY_SIZE(cmx270_dm9k_resource), | |
77 | .resource = cmx270_dm9k_resource, | |
78 | .dev = { | |
79 | .platform_data = &cmx270_dm9k_platdata, | |
80 | } | |
81 | }; | |
82 | ||
83 | /* audio device */ | |
84 | static struct platform_device cmx270_audio_device = { | |
85 | .name = "pxa2xx-ac97", | |
86 | .id = -1, | |
87 | }; | |
88 | ||
89 | /* touchscreen controller */ | |
90 | static struct platform_device cmx270_ts_device = { | |
91 | .name = "ucb1400_ts", | |
92 | .id = -1, | |
93 | }; | |
94 | ||
95 | /* RTC */ | |
96 | static struct resource cmx270_v3020_resource[] = { | |
97 | [0] = { | |
98 | .start = RTC_PHYS_BASE, | |
99 | .end = RTC_PHYS_BASE + 4, | |
100 | .flags = IORESOURCE_MEM, | |
101 | }, | |
102 | }; | |
103 | ||
104 | struct v3020_platform_data cmx270_v3020_pdata = { | |
105 | .leftshift = 16, | |
106 | }; | |
107 | ||
108 | static struct platform_device cmx270_rtc_device = { | |
109 | .name = "v3020", | |
110 | .num_resources = ARRAY_SIZE(cmx270_v3020_resource), | |
111 | .resource = cmx270_v3020_resource, | |
112 | .id = -1, | |
113 | .dev = { | |
114 | .platform_data = &cmx270_v3020_pdata, | |
115 | } | |
116 | }; | |
117 | ||
118 | /* | |
119 | * CM-X270 LEDs | |
120 | */ | |
121 | static struct platform_device cmx270_led_device = { | |
122 | .name = "cm-x270-led", | |
123 | .id = -1, | |
124 | }; | |
125 | ||
126 | /* 2700G graphics */ | |
127 | static u64 fb_dma_mask = ~(u64)0; | |
128 | ||
129 | static struct resource cmx270_2700G_resource[] = { | |
130 | /* frame buffer memory including ODFB and External SDRAM */ | |
131 | [0] = { | |
132 | .start = MARATHON_PHYS, | |
133 | .end = MARATHON_PHYS + 0x02000000, | |
134 | .flags = IORESOURCE_MEM, | |
135 | }, | |
136 | /* Marathon registers */ | |
137 | [1] = { | |
138 | .start = MARATHON_PHYS + 0x03fe0000, | |
139 | .end = MARATHON_PHYS + 0x03ffffff, | |
140 | .flags = IORESOURCE_MEM, | |
141 | }, | |
142 | }; | |
143 | ||
144 | static unsigned long save_lcd_regs[10]; | |
145 | ||
146 | static int cmx270_marathon_probe(struct fb_info *fb) | |
147 | { | |
148 | /* save PXA-270 pin settings before enabling 2700G */ | |
149 | save_lcd_regs[0] = GPDR1; | |
150 | save_lcd_regs[1] = GPDR2; | |
151 | save_lcd_regs[2] = GAFR1_U; | |
152 | save_lcd_regs[3] = GAFR2_L; | |
153 | save_lcd_regs[4] = GAFR2_U; | |
154 | ||
155 | /* Disable PXA-270 on-chip controller driving pins */ | |
156 | GPDR1 &= ~(0xfc000000); | |
157 | GPDR2 &= ~(0x00c03fff); | |
158 | GAFR1_U &= ~(0xfff00000); | |
159 | GAFR2_L &= ~(0x0fffffff); | |
160 | GAFR2_U &= ~(0x0000f000); | |
161 | return 0; | |
162 | } | |
163 | ||
164 | static int cmx270_marathon_remove(struct fb_info *fb) | |
165 | { | |
166 | GPDR1 = save_lcd_regs[0]; | |
167 | GPDR2 = save_lcd_regs[1]; | |
168 | GAFR1_U = save_lcd_regs[2]; | |
169 | GAFR2_L = save_lcd_regs[3]; | |
170 | GAFR2_U = save_lcd_regs[4]; | |
171 | return 0; | |
172 | } | |
173 | ||
174 | static struct mbxfb_platform_data cmx270_2700G_data = { | |
175 | .xres = { | |
176 | .min = 240, | |
177 | .max = 1200, | |
178 | .defval = 640, | |
179 | }, | |
180 | .yres = { | |
181 | .min = 240, | |
182 | .max = 1200, | |
183 | .defval = 480, | |
184 | }, | |
185 | .bpp = { | |
186 | .min = 16, | |
187 | .max = 32, | |
188 | .defval = 16, | |
189 | }, | |
190 | .memsize = 8*1024*1024, | |
191 | .probe = cmx270_marathon_probe, | |
192 | .remove = cmx270_marathon_remove, | |
193 | }; | |
194 | ||
195 | static struct platform_device cmx270_2700G = { | |
196 | .name = "mbx-fb", | |
197 | .dev = { | |
198 | .platform_data = &cmx270_2700G_data, | |
199 | .dma_mask = &fb_dma_mask, | |
200 | .coherent_dma_mask = 0xffffffff, | |
201 | }, | |
202 | .num_resources = ARRAY_SIZE(cmx270_2700G_resource), | |
203 | .resource = cmx270_2700G_resource, | |
204 | .id = -1, | |
205 | }; | |
206 | ||
207 | static u64 ata_dma_mask = ~(u64)0; | |
208 | ||
209 | static struct platform_device cmx270_ata = { | |
210 | .name = "pata_cm_x270", | |
211 | .id = -1, | |
212 | .dev = { | |
213 | .dma_mask = &ata_dma_mask, | |
214 | .coherent_dma_mask = 0xffffffff, | |
215 | }, | |
216 | }; | |
217 | ||
218 | /* platform devices */ | |
219 | static struct platform_device *platform_devices[] __initdata = { | |
220 | &cmx270_device_dm9k, | |
221 | &cmx270_audio_device, | |
222 | &cmx270_rtc_device, | |
223 | &cmx270_2700G, | |
224 | &cmx270_led_device, | |
225 | &cmx270_ts_device, | |
226 | &cmx270_ata, | |
227 | }; | |
228 | ||
229 | /* Map PCI companion and IDE/General Purpose CS statically */ | |
230 | static struct map_desc cmx270_io_desc[] __initdata = { | |
231 | [0] = { /* IDE/general purpose space */ | |
232 | .virtual = CMX270_IDE104_VIRT, | |
233 | .pfn = __phys_to_pfn(CMX270_IDE104_PHYS), | |
234 | .length = SZ_64M - SZ_8M, | |
235 | .type = MT_DEVICE | |
236 | }, | |
237 | [1] = { /* PCI bridge */ | |
238 | .virtual = CMX270_IT8152_VIRT, | |
239 | .pfn = __phys_to_pfn(CMX270_IT8152_PHYS), | |
240 | .length = SZ_64M, | |
241 | .type = MT_DEVICE | |
242 | }, | |
243 | }; | |
244 | ||
245 | /* | |
246 | Display definitions | |
247 | keep these for backwards compatibility, although symbolic names (as | |
248 | e.g. in lpd270.c) looks better | |
249 | */ | |
250 | #define MTYPE_STN320x240 0 | |
251 | #define MTYPE_TFT640x480 1 | |
252 | #define MTYPE_CRT640x480 2 | |
253 | #define MTYPE_CRT800x600 3 | |
254 | #define MTYPE_TFT320x240 6 | |
255 | #define MTYPE_STN640x480 7 | |
256 | ||
257 | static struct pxafb_mode_info generic_stn_320x240_mode = { | |
258 | .pixclock = 76923, | |
259 | .bpp = 8, | |
260 | .xres = 320, | |
261 | .yres = 240, | |
262 | .hsync_len = 3, | |
263 | .vsync_len = 2, | |
264 | .left_margin = 3, | |
265 | .upper_margin = 0, | |
266 | .right_margin = 3, | |
267 | .lower_margin = 0, | |
268 | .sync = (FB_SYNC_HOR_HIGH_ACT | | |
269 | FB_SYNC_VERT_HIGH_ACT), | |
270 | .cmap_greyscale = 0, | |
271 | }; | |
272 | ||
273 | static struct pxafb_mach_info generic_stn_320x240 = { | |
274 | .modes = &generic_stn_320x240_mode, | |
275 | .num_modes = 1, | |
276 | .lccr0 = 0, | |
277 | .lccr3 = (LCCR3_PixClkDiv(0x03) | | |
278 | LCCR3_Acb(0xff) | | |
279 | LCCR3_PCP), | |
280 | .cmap_inverse = 0, | |
281 | .cmap_static = 0, | |
282 | }; | |
283 | ||
284 | static struct pxafb_mode_info generic_tft_640x480_mode = { | |
285 | .pixclock = 38461, | |
286 | .bpp = 8, | |
287 | .xres = 640, | |
288 | .yres = 480, | |
289 | .hsync_len = 60, | |
290 | .vsync_len = 2, | |
291 | .left_margin = 70, | |
292 | .upper_margin = 10, | |
293 | .right_margin = 70, | |
294 | .lower_margin = 5, | |
295 | .sync = 0, | |
296 | .cmap_greyscale = 0, | |
297 | }; | |
298 | ||
299 | static struct pxafb_mach_info generic_tft_640x480 = { | |
300 | .modes = &generic_tft_640x480_mode, | |
301 | .num_modes = 1, | |
302 | .lccr0 = (LCCR0_PAS), | |
303 | .lccr3 = (LCCR3_PixClkDiv(0x01) | | |
304 | LCCR3_Acb(0xff) | | |
305 | LCCR3_PCP), | |
306 | .cmap_inverse = 0, | |
307 | .cmap_static = 0, | |
308 | }; | |
309 | ||
310 | static struct pxafb_mode_info generic_crt_640x480_mode = { | |
311 | .pixclock = 38461, | |
312 | .bpp = 8, | |
313 | .xres = 640, | |
314 | .yres = 480, | |
315 | .hsync_len = 63, | |
316 | .vsync_len = 2, | |
317 | .left_margin = 81, | |
318 | .upper_margin = 33, | |
319 | .right_margin = 16, | |
320 | .lower_margin = 10, | |
321 | .sync = (FB_SYNC_HOR_HIGH_ACT | | |
322 | FB_SYNC_VERT_HIGH_ACT), | |
323 | .cmap_greyscale = 0, | |
324 | }; | |
325 | ||
326 | static struct pxafb_mach_info generic_crt_640x480 = { | |
327 | .modes = &generic_crt_640x480_mode, | |
328 | .num_modes = 1, | |
329 | .lccr0 = (LCCR0_PAS), | |
330 | .lccr3 = (LCCR3_PixClkDiv(0x01) | | |
331 | LCCR3_Acb(0xff)), | |
332 | .cmap_inverse = 0, | |
333 | .cmap_static = 0, | |
334 | }; | |
335 | ||
336 | static struct pxafb_mode_info generic_crt_800x600_mode = { | |
337 | .pixclock = 28846, | |
338 | .bpp = 8, | |
339 | .xres = 800, | |
340 | .yres = 600, | |
341 | .hsync_len = 63, | |
342 | .vsync_len = 2, | |
343 | .left_margin = 26, | |
344 | .upper_margin = 21, | |
345 | .right_margin = 26, | |
346 | .lower_margin = 11, | |
347 | .sync = (FB_SYNC_HOR_HIGH_ACT | | |
348 | FB_SYNC_VERT_HIGH_ACT), | |
349 | .cmap_greyscale = 0, | |
350 | }; | |
351 | ||
352 | static struct pxafb_mach_info generic_crt_800x600 = { | |
353 | .modes = &generic_crt_800x600_mode, | |
354 | .num_modes = 1, | |
355 | .lccr0 = (LCCR0_PAS), | |
356 | .lccr3 = (LCCR3_PixClkDiv(0x02) | | |
357 | LCCR3_Acb(0xff)), | |
358 | .cmap_inverse = 0, | |
359 | .cmap_static = 0, | |
360 | }; | |
361 | ||
362 | static struct pxafb_mode_info generic_tft_320x240_mode = { | |
363 | .pixclock = 134615, | |
364 | .bpp = 16, | |
365 | .xres = 320, | |
366 | .yres = 240, | |
367 | .hsync_len = 63, | |
368 | .vsync_len = 7, | |
369 | .left_margin = 75, | |
370 | .upper_margin = 0, | |
371 | .right_margin = 15, | |
372 | .lower_margin = 15, | |
373 | .sync = 0, | |
374 | .cmap_greyscale = 0, | |
375 | }; | |
376 | ||
377 | static struct pxafb_mach_info generic_tft_320x240 = { | |
378 | .modes = &generic_tft_320x240_mode, | |
379 | .num_modes = 1, | |
380 | .lccr0 = (LCCR0_PAS), | |
381 | .lccr3 = (LCCR3_PixClkDiv(0x06) | | |
382 | LCCR3_Acb(0xff) | | |
383 | LCCR3_PCP), | |
384 | .cmap_inverse = 0, | |
385 | .cmap_static = 0, | |
386 | }; | |
387 | ||
388 | static struct pxafb_mode_info generic_stn_640x480_mode = { | |
389 | .pixclock = 57692, | |
390 | .bpp = 8, | |
391 | .xres = 640, | |
392 | .yres = 480, | |
393 | .hsync_len = 4, | |
394 | .vsync_len = 2, | |
395 | .left_margin = 10, | |
396 | .upper_margin = 5, | |
397 | .right_margin = 10, | |
398 | .lower_margin = 5, | |
399 | .sync = (FB_SYNC_HOR_HIGH_ACT | | |
400 | FB_SYNC_VERT_HIGH_ACT), | |
401 | .cmap_greyscale = 0, | |
402 | }; | |
403 | ||
404 | static struct pxafb_mach_info generic_stn_640x480 = { | |
405 | .modes = &generic_stn_640x480_mode, | |
406 | .num_modes = 1, | |
407 | .lccr0 = 0, | |
408 | .lccr3 = (LCCR3_PixClkDiv(0x02) | | |
409 | LCCR3_Acb(0xff)), | |
410 | .cmap_inverse = 0, | |
411 | .cmap_static = 0, | |
412 | }; | |
413 | ||
414 | static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480; | |
415 | ||
416 | static int __init cmx270_set_display(char *str) | |
417 | { | |
418 | int disp_type = simple_strtol(str, NULL, 0); | |
419 | switch (disp_type) { | |
420 | case MTYPE_STN320x240: | |
421 | cmx270_display = &generic_stn_320x240; | |
422 | break; | |
423 | case MTYPE_TFT640x480: | |
424 | cmx270_display = &generic_tft_640x480; | |
425 | break; | |
426 | case MTYPE_CRT640x480: | |
427 | cmx270_display = &generic_crt_640x480; | |
428 | break; | |
429 | case MTYPE_CRT800x600: | |
430 | cmx270_display = &generic_crt_800x600; | |
431 | break; | |
432 | case MTYPE_TFT320x240: | |
433 | cmx270_display = &generic_tft_320x240; | |
434 | break; | |
435 | case MTYPE_STN640x480: | |
436 | cmx270_display = &generic_stn_640x480; | |
437 | break; | |
438 | default: /* fallback to CRT 640x480 */ | |
439 | cmx270_display = &generic_crt_640x480; | |
440 | break; | |
441 | } | |
442 | return 1; | |
443 | } | |
444 | ||
445 | /* | |
446 | This should be done really early to get proper configuration for | |
447 | frame buffer. | |
448 | Indeed, pxafb parameters can be used istead, but CM-X270 bootloader | |
449 | has limitied line length for kernel command line, and also it will | |
450 | break compatibitlty with proprietary releases already in field. | |
451 | */ | |
452 | __setup("monitor=", cmx270_set_display); | |
453 | ||
454 | /* PXA27x OHCI controller setup */ | |
455 | static int cmx270_ohci_init(struct device *dev) | |
456 | { | |
457 | /* Set the Power Control Polarity Low */ | |
458 | UHCHR = (UHCHR | UHCHR_PCPL) & | |
459 | ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); | |
460 | ||
461 | return 0; | |
462 | } | |
463 | ||
464 | static struct pxaohci_platform_data cmx270_ohci_platform_data = { | |
465 | .port_mode = PMM_PERPORT_MODE, | |
466 | .init = cmx270_ohci_init, | |
467 | }; | |
468 | ||
469 | ||
470 | static int cmx270_mci_init(struct device *dev, | |
471 | irq_handler_t cmx270_detect_int, | |
472 | void *data) | |
473 | { | |
474 | int err; | |
475 | ||
476 | /* | |
477 | * setup GPIO for PXA27x MMC controller | |
478 | */ | |
479 | pxa_gpio_mode(GPIO32_MMCCLK_MD); | |
480 | pxa_gpio_mode(GPIO112_MMCCMD_MD); | |
481 | pxa_gpio_mode(GPIO92_MMCDAT0_MD); | |
482 | pxa_gpio_mode(GPIO109_MMCDAT1_MD); | |
483 | pxa_gpio_mode(GPIO110_MMCDAT2_MD); | |
484 | pxa_gpio_mode(GPIO111_MMCDAT3_MD); | |
485 | ||
486 | /* SB-X270 uses GPIO105 as SD power enable */ | |
487 | pxa_gpio_mode(105 | GPIO_OUT); | |
488 | ||
489 | /* card detect IRQ on GPIO 83 */ | |
490 | pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ)); | |
3696a8a4 MR |
491 | |
492 | err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int, | |
493 | IRQF_DISABLED | IRQF_TRIGGER_FALLING, | |
494 | "MMC card detect", data); | |
2687bd38 | 495 | if (err) |
3696a8a4 MR |
496 | printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't" |
497 | " request MMC card detect IRQ\n"); | |
3696a8a4 | 498 | |
2687bd38 | 499 | return err; |
3696a8a4 MR |
500 | } |
501 | ||
502 | static void cmx270_mci_setpower(struct device *dev, unsigned int vdd) | |
503 | { | |
504 | struct pxamci_platform_data *p_d = dev->platform_data; | |
505 | ||
506 | if ((1 << vdd) & p_d->ocr_mask) { | |
507 | printk(KERN_DEBUG "%s: on\n", __FUNCTION__); | |
508 | GPCR(105) = GPIO_bit(105); | |
509 | } else { | |
510 | GPSR(105) = GPIO_bit(105); | |
511 | printk(KERN_DEBUG "%s: off\n", __FUNCTION__); | |
512 | } | |
513 | } | |
514 | ||
515 | static void cmx270_mci_exit(struct device *dev, void *data) | |
516 | { | |
517 | free_irq(CMX270_MMC_IRQ, data); | |
518 | } | |
519 | ||
520 | static struct pxamci_platform_data cmx270_mci_platform_data = { | |
521 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | |
522 | .init = cmx270_mci_init, | |
523 | .setpower = cmx270_mci_setpower, | |
524 | .exit = cmx270_mci_exit, | |
525 | }; | |
526 | ||
527 | #ifdef CONFIG_PM | |
528 | static unsigned long sleep_save_msc[10]; | |
529 | ||
530 | static int cmx270_suspend(struct sys_device *dev, pm_message_t state) | |
531 | { | |
532 | cmx270_pci_suspend(); | |
533 | ||
534 | /* save MSC registers */ | |
535 | sleep_save_msc[0] = MSC0; | |
536 | sleep_save_msc[1] = MSC1; | |
537 | sleep_save_msc[2] = MSC2; | |
538 | ||
539 | /* setup power saving mode registers */ | |
540 | PCFR = 0x0; | |
541 | PSLR = 0xff400000; | |
542 | PMCR = 0x00000005; | |
543 | PWER = 0x80000000; | |
544 | PFER = 0x00000000; | |
545 | PRER = 0x00000000; | |
546 | PGSR0 = 0xC0018800; | |
547 | PGSR1 = 0x004F0002; | |
548 | PGSR2 = 0x6021C000; | |
549 | PGSR3 = 0x00020000; | |
550 | ||
551 | return 0; | |
552 | } | |
553 | ||
554 | static int cmx270_resume(struct sys_device *dev) | |
555 | { | |
556 | cmx270_pci_resume(); | |
557 | ||
558 | /* restore MSC registers */ | |
559 | MSC0 = sleep_save_msc[0]; | |
560 | MSC1 = sleep_save_msc[1]; | |
561 | MSC2 = sleep_save_msc[2]; | |
562 | ||
563 | return 0; | |
564 | } | |
565 | ||
566 | static struct sysdev_class cmx270_pm_sysclass = { | |
af5ca3f4 | 567 | .name = "pm", |
3696a8a4 MR |
568 | .resume = cmx270_resume, |
569 | .suspend = cmx270_suspend, | |
570 | }; | |
571 | ||
572 | static struct sys_device cmx270_pm_device = { | |
573 | .cls = &cmx270_pm_sysclass, | |
574 | }; | |
575 | ||
576 | static int __init cmx270_pm_init(void) | |
577 | { | |
578 | int error; | |
579 | error = sysdev_class_register(&cmx270_pm_sysclass); | |
580 | if (error == 0) | |
581 | error = sysdev_register(&cmx270_pm_device); | |
582 | return error; | |
583 | } | |
584 | #else | |
585 | static int __init cmx270_pm_init(void) { return 0; } | |
586 | #endif | |
587 | ||
588 | static void __init cmx270_init(void) | |
589 | { | |
590 | cmx270_pm_init(); | |
591 | ||
592 | set_pxa_fb_info(cmx270_display); | |
593 | ||
594 | /* register CM-X270 platform devices */ | |
595 | platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); | |
596 | ||
597 | /* set MCI and OHCI platform parameters */ | |
598 | pxa_set_mci_info(&cmx270_mci_platform_data); | |
599 | pxa_set_ohci_info(&cmx270_ohci_platform_data); | |
600 | ||
601 | /* This enables the STUART */ | |
602 | pxa_gpio_mode(GPIO46_STRXD_MD); | |
603 | pxa_gpio_mode(GPIO47_STTXD_MD); | |
604 | ||
605 | /* This enables the BTUART */ | |
606 | pxa_gpio_mode(GPIO42_BTRXD_MD); | |
607 | pxa_gpio_mode(GPIO43_BTTXD_MD); | |
608 | pxa_gpio_mode(GPIO44_BTCTS_MD); | |
609 | pxa_gpio_mode(GPIO45_BTRTS_MD); | |
610 | } | |
611 | ||
612 | static void __init cmx270_init_irq(void) | |
613 | { | |
614 | pxa27x_init_irq(); | |
615 | ||
616 | ||
617 | cmx270_pci_init_irq(); | |
618 | ||
619 | /* Setup interrupt for dm9000 */ | |
620 | pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ)); | |
621 | set_irq_type(CMX270_ETHIRQ, IRQT_RISING); | |
622 | ||
623 | /* Setup interrupt for 2700G */ | |
624 | pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ)); | |
625 | set_irq_type(CMX270_GFXIRQ, IRQT_FALLING); | |
626 | } | |
627 | ||
628 | static void __init cmx270_map_io(void) | |
629 | { | |
630 | pxa_map_io(); | |
631 | iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc)); | |
632 | } | |
633 | ||
634 | ||
635 | MACHINE_START(ARMCORE, "Compulab CM-x270") | |
636 | .boot_params = 0xa0000100, | |
637 | .phys_io = 0x40000000, | |
638 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | |
639 | .map_io = cmx270_map_io, | |
640 | .init_irq = cmx270_init_irq, | |
641 | .timer = &pxa_timer, | |
642 | .init_machine = cmx270_init, | |
643 | MACHINE_END |