Commit | Line | Data |
---|---|---|
63c85238 PW |
1 | /* |
2 | * omap_hwmod macros, structures | |
3 | * | |
550c8092 | 4 | * Copyright (C) 2009-2011 Nokia Corporation |
e6d3a8b0 | 5 | * Copyright (C) 2011-2012 Texas Instruments, Inc. |
63c85238 PW |
6 | * Paul Walmsley |
7 | * | |
43b40992 | 8 | * Created in collaboration with (alphabetical order): Benoît Cousson, |
63c85238 PW |
9 | * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari |
10 | * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License version 2 as | |
14 | * published by the Free Software Foundation. | |
15 | * | |
16 | * These headers and macros are used to define OMAP on-chip module | |
17 | * data and their integration with other OMAP modules and Linux. | |
74ff3a68 PW |
18 | * Copious documentation and references can also be found in the |
19 | * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this | |
20 | * writing). | |
63c85238 PW |
21 | * |
22 | * To do: | |
23 | * - add interconnect error log structures | |
24 | * - add pinmuxing | |
25 | * - init_conn_id_bit (CONNID_BIT_VECTOR) | |
26 | * - implement default hwmod SMS/SDRC flags? | |
b56b7bc8 | 27 | * - move Linux-specific data ("non-ROM data") out |
63c85238 PW |
28 | * |
29 | */ | |
30 | #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H | |
31 | #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H | |
32 | ||
33 | #include <linux/kernel.h> | |
a2debdbd | 34 | #include <linux/init.h> |
358f0e63 | 35 | #include <linux/list.h> |
63c85238 | 36 | #include <linux/ioport.h> |
dc6d1cda | 37 | #include <linux/spinlock.h> |
63c85238 PW |
38 | |
39 | struct omap_device; | |
40 | ||
358f0e63 TG |
41 | extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1; |
42 | extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; | |
248b3b3d | 43 | extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; |
358f0e63 TG |
44 | |
45 | /* | |
46 | * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant | |
47 | * with the original PRCM protocol defined for OMAP2420 | |
48 | */ | |
49 | #define SYSC_TYPE1_MIDLEMODE_SHIFT 12 | |
4ce107cc | 50 | #define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT) |
358f0e63 | 51 | #define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8 |
4ce107cc | 52 | #define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT) |
358f0e63 | 53 | #define SYSC_TYPE1_SIDLEMODE_SHIFT 3 |
4ce107cc | 54 | #define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT) |
358f0e63 | 55 | #define SYSC_TYPE1_ENAWAKEUP_SHIFT 2 |
4ce107cc | 56 | #define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT) |
358f0e63 | 57 | #define SYSC_TYPE1_SOFTRESET_SHIFT 1 |
4ce107cc | 58 | #define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT) |
358f0e63 | 59 | #define SYSC_TYPE1_AUTOIDLE_SHIFT 0 |
4ce107cc | 60 | #define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT) |
358f0e63 TG |
61 | |
62 | /* | |
63 | * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant | |
64 | * with the new PRCM protocol defined for new OMAP4 IPs. | |
65 | */ | |
66 | #define SYSC_TYPE2_SOFTRESET_SHIFT 0 | |
67 | #define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT) | |
68 | #define SYSC_TYPE2_SIDLEMODE_SHIFT 2 | |
69 | #define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT) | |
70 | #define SYSC_TYPE2_MIDLEMODE_SHIFT 4 | |
71 | #define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT) | |
6668546f KVA |
72 | #define SYSC_TYPE2_DMADISABLE_SHIFT 16 |
73 | #define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT) | |
63c85238 | 74 | |
248b3b3d VH |
75 | /* |
76 | * OCP SYSCONFIG bit shifts/masks TYPE3. | |
77 | * This is applicable for some IPs present in AM33XX | |
78 | */ | |
79 | #define SYSC_TYPE3_SIDLEMODE_SHIFT 0 | |
80 | #define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT) | |
81 | #define SYSC_TYPE3_MIDLEMODE_SHIFT 2 | |
82 | #define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT) | |
63c85238 PW |
83 | |
84 | /* OCP SYSSTATUS bit shifts/masks */ | |
85 | #define SYSS_RESETDONE_SHIFT 0 | |
86 | #define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT) | |
87 | ||
88 | /* Master standby/slave idle mode flags */ | |
89 | #define HWMOD_IDLEMODE_FORCE (1 << 0) | |
90 | #define HWMOD_IDLEMODE_NO (1 << 1) | |
91 | #define HWMOD_IDLEMODE_SMART (1 << 2) | |
86009eb3 | 92 | #define HWMOD_IDLEMODE_SMART_WKUP (1 << 3) |
63c85238 | 93 | |
03fdefe5 BC |
94 | /* modulemode control type (SW or HW) */ |
95 | #define MODULEMODE_HWCTRL 1 | |
96 | #define MODULEMODE_SWCTRL 2 | |
97 | ||
7dedd346 RN |
98 | #define DEBUG_OMAP2UART1_FLAGS 0 |
99 | #define DEBUG_OMAP2UART2_FLAGS 0 | |
100 | #define DEBUG_OMAP2UART3_FLAGS 0 | |
101 | #define DEBUG_OMAP3UART3_FLAGS 0 | |
102 | #define DEBUG_OMAP3UART4_FLAGS 0 | |
103 | #define DEBUG_OMAP4UART3_FLAGS 0 | |
104 | #define DEBUG_OMAP4UART4_FLAGS 0 | |
105 | #define DEBUG_TI81XXUART1_FLAGS 0 | |
106 | #define DEBUG_TI81XXUART2_FLAGS 0 | |
107 | #define DEBUG_TI81XXUART3_FLAGS 0 | |
108 | #define DEBUG_AM33XXUART1_FLAGS 0 | |
109 | ||
110 | #define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) | |
111 | ||
63aa945b TL |
112 | #ifdef CONFIG_OMAP_GPMC_DEBUG |
113 | #define DEBUG_OMAP_GPMC_HWMOD_FLAGS HWMOD_INIT_NO_RESET | |
114 | #else | |
115 | #define DEBUG_OMAP_GPMC_HWMOD_FLAGS 0 | |
116 | #endif | |
117 | ||
7dedd346 RN |
118 | #if defined(CONFIG_DEBUG_OMAP2UART1) |
119 | #undef DEBUG_OMAP2UART1_FLAGS | |
120 | #define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS | |
121 | #elif defined(CONFIG_DEBUG_OMAP2UART2) | |
122 | #undef DEBUG_OMAP2UART2_FLAGS | |
123 | #define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS | |
124 | #elif defined(CONFIG_DEBUG_OMAP2UART3) | |
125 | #undef DEBUG_OMAP2UART3_FLAGS | |
126 | #define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS | |
127 | #elif defined(CONFIG_DEBUG_OMAP3UART3) | |
128 | #undef DEBUG_OMAP3UART3_FLAGS | |
129 | #define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS | |
130 | #elif defined(CONFIG_DEBUG_OMAP3UART4) | |
131 | #undef DEBUG_OMAP3UART4_FLAGS | |
132 | #define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS | |
133 | #elif defined(CONFIG_DEBUG_OMAP4UART3) | |
134 | #undef DEBUG_OMAP4UART3_FLAGS | |
135 | #define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS | |
136 | #elif defined(CONFIG_DEBUG_OMAP4UART4) | |
137 | #undef DEBUG_OMAP4UART4_FLAGS | |
138 | #define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS | |
139 | #elif defined(CONFIG_DEBUG_TI81XXUART1) | |
140 | #undef DEBUG_TI81XXUART1_FLAGS | |
141 | #define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS | |
142 | #elif defined(CONFIG_DEBUG_TI81XXUART2) | |
143 | #undef DEBUG_TI81XXUART2_FLAGS | |
144 | #define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS | |
145 | #elif defined(CONFIG_DEBUG_TI81XXUART3) | |
146 | #undef DEBUG_TI81XXUART3_FLAGS | |
147 | #define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS | |
148 | #elif defined(CONFIG_DEBUG_AM33XXUART1) | |
149 | #undef DEBUG_AM33XXUART1_FLAGS | |
150 | #define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS | |
151 | #endif | |
03fdefe5 | 152 | |
9796b323 TL |
153 | /** |
154 | * struct omap_hwmod_mux_info - hwmod specific mux configuration | |
155 | * @pads: array of omap_device_pad entries | |
156 | * @nr_pads: number of omap_device_pad entries | |
157 | * | |
158 | * Note that this is currently built during init as needed. | |
159 | */ | |
160 | struct omap_hwmod_mux_info { | |
161 | int nr_pads; | |
162 | struct omap_device_pad *pads; | |
029268e4 TL |
163 | int nr_pads_dynamic; |
164 | struct omap_device_pad **pads_dynamic; | |
13a3fe52 | 165 | int *irqs; |
029268e4 | 166 | bool enabled; |
9796b323 TL |
167 | }; |
168 | ||
63c85238 | 169 | /** |
718bfd76 PW |
170 | * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod |
171 | * @name: name of the IRQ channel (module local name) | |
212738a4 | 172 | * @irq: IRQ channel ID (should be non-negative except -1 = terminator) |
718bfd76 PW |
173 | * |
174 | * @name should be something short, e.g., "tx" or "rx". It is for use | |
175 | * by platform_get_resource_byname(). It is defined locally to the | |
176 | * hwmod. | |
177 | */ | |
178 | struct omap_hwmod_irq_info { | |
179 | const char *name; | |
212738a4 | 180 | s16 irq; |
718bfd76 PW |
181 | }; |
182 | ||
183 | /** | |
184 | * struct omap_hwmod_dma_info - DMA channels used by the hwmod | |
63c85238 | 185 | * @name: name of the DMA channel (module local name) |
bc614958 | 186 | * @dma_req: DMA request ID (should be non-negative except -1 = terminator) |
63c85238 PW |
187 | * |
188 | * @name should be something short, e.g., "tx" or "rx". It is for use | |
189 | * by platform_get_resource_byname(). It is defined locally to the | |
190 | * hwmod. | |
191 | */ | |
192 | struct omap_hwmod_dma_info { | |
193 | const char *name; | |
bc614958 | 194 | s16 dma_req; |
63c85238 PW |
195 | }; |
196 | ||
5365efbe BC |
197 | /** |
198 | * struct omap_hwmod_rst_info - IPs reset lines use by hwmod | |
199 | * @name: name of the reset line (module local name) | |
200 | * @rst_shift: Offset of the reset bit | |
cc1226e7 | 201 | * @st_shift: Offset of the reset status bit (OMAP2/3 only) |
5365efbe BC |
202 | * |
203 | * @name should be something short, e.g., "cpu0" or "rst". It is defined | |
204 | * locally to the hwmod. | |
205 | */ | |
206 | struct omap_hwmod_rst_info { | |
207 | const char *name; | |
208 | u8 rst_shift; | |
cc1226e7 | 209 | u8 st_shift; |
5365efbe BC |
210 | }; |
211 | ||
63c85238 PW |
212 | /** |
213 | * struct omap_hwmod_opt_clk - optional clocks used by this hwmod | |
214 | * @role: "sys", "32k", "tv", etc -- for use in clk_get() | |
50ebdac2 | 215 | * @clk: opt clock: OMAP clock name |
63c85238 PW |
216 | * @_clk: pointer to the struct clk (filled in at runtime) |
217 | * | |
218 | * The module's interface clock and main functional clock should not | |
219 | * be added as optional clocks. | |
220 | */ | |
221 | struct omap_hwmod_opt_clk { | |
222 | const char *role; | |
50ebdac2 | 223 | const char *clk; |
63c85238 PW |
224 | struct clk *_clk; |
225 | }; | |
226 | ||
227 | ||
228 | /* omap_hwmod_omap2_firewall.flags bits */ | |
229 | #define OMAP_FIREWALL_L3 (1 << 0) | |
230 | #define OMAP_FIREWALL_L4 (1 << 1) | |
231 | ||
232 | /** | |
233 | * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data | |
234 | * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_* | |
235 | * @l4_fw_region: L4 firewall region ID | |
236 | * @l4_prot_group: L4 protection group ID | |
237 | * @flags: (see omap_hwmod_omap2_firewall.flags macros above) | |
238 | */ | |
239 | struct omap_hwmod_omap2_firewall { | |
240 | u8 l3_perm_bit; | |
241 | u8 l4_fw_region; | |
242 | u8 l4_prot_group; | |
243 | u8 flags; | |
244 | }; | |
245 | ||
246 | ||
247 | /* | |
248 | * omap_hwmod_addr_space.flags bits | |
249 | * | |
250 | * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init. | |
251 | * ADDR_TYPE_RT: Address space contains module register target data. | |
252 | */ | |
b56b7bc8 | 253 | #define ADDR_MAP_ON_INIT (1 << 0) /* XXX does not belong */ |
63c85238 PW |
254 | #define ADDR_TYPE_RT (1 << 1) |
255 | ||
256 | /** | |
cd503802 KVA |
257 | * struct omap_hwmod_addr_space - address space handled by the hwmod |
258 | * @name: name of the address space | |
63c85238 PW |
259 | * @pa_start: starting physical address |
260 | * @pa_end: ending physical address | |
261 | * @flags: (see omap_hwmod_addr_space.flags macros above) | |
262 | * | |
263 | * Address space doesn't necessarily follow physical interconnect | |
264 | * structure. GPMC is one example. | |
265 | */ | |
266 | struct omap_hwmod_addr_space { | |
cd503802 | 267 | const char *name; |
63c85238 PW |
268 | u32 pa_start; |
269 | u32 pa_end; | |
270 | u8 flags; | |
271 | }; | |
272 | ||
273 | ||
274 | /* | |
275 | * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this | |
276 | * interface to interact with the hwmod. Used to add sleep dependencies | |
277 | * when the module is enabled or disabled. | |
278 | */ | |
279 | #define OCP_USER_MPU (1 << 0) | |
280 | #define OCP_USER_SDMA (1 << 1) | |
3d10f0d6 | 281 | #define OCP_USER_DSP (1 << 2) |
42b9e387 | 282 | #define OCP_USER_IVA (1 << 3) |
63c85238 PW |
283 | |
284 | /* omap_hwmod_ocp_if.flags bits */ | |
33f7ec81 BC |
285 | #define OCPIF_SWSUP_IDLE (1 << 0) |
286 | #define OCPIF_CAN_BURST (1 << 1) | |
63c85238 | 287 | |
2221b5cd PW |
288 | /* omap_hwmod_ocp_if._int_flags possibilities */ |
289 | #define _OCPIF_INT_FLAGS_REGISTERED (1 << 0) | |
290 | ||
291 | ||
63c85238 PW |
292 | /** |
293 | * struct omap_hwmod_ocp_if - OCP interface data | |
294 | * @master: struct omap_hwmod that initiates OCP transactions on this link | |
295 | * @slave: struct omap_hwmod that responds to OCP transactions on this link | |
296 | * @addr: address space associated with this link | |
50ebdac2 | 297 | * @clk: interface clock: OMAP clock name |
63c85238 PW |
298 | * @_clk: pointer to the interface struct clk (filled in at runtime) |
299 | * @fw: interface firewall data | |
63c85238 | 300 | * @width: OCP data width |
63c85238 PW |
301 | * @user: initiators using this interface (see OCP_USER_* macros above) |
302 | * @flags: OCP interface flags (see OCPIF_* macros above) | |
2221b5cd | 303 | * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above) |
63c85238 PW |
304 | * |
305 | * It may also be useful to add a tag_cnt field for OCP2.x devices. | |
306 | * | |
307 | * Parameter names beginning with an underscore are managed internally by | |
308 | * the omap_hwmod code and should not be set during initialization. | |
309 | */ | |
310 | struct omap_hwmod_ocp_if { | |
311 | struct omap_hwmod *master; | |
312 | struct omap_hwmod *slave; | |
313 | struct omap_hwmod_addr_space *addr; | |
50ebdac2 | 314 | const char *clk; |
63c85238 | 315 | struct clk *_clk; |
a1e31235 | 316 | struct list_head node; |
63c85238 PW |
317 | union { |
318 | struct omap_hwmod_omap2_firewall omap2; | |
319 | } fw; | |
63c85238 | 320 | u8 width; |
63c85238 PW |
321 | u8 user; |
322 | u8 flags; | |
2221b5cd | 323 | u8 _int_flags; |
63c85238 PW |
324 | }; |
325 | ||
326 | ||
327 | /* Macros for use in struct omap_hwmod_sysconfig */ | |
328 | ||
329 | /* Flags for use in omap_hwmod_sysconfig.idlemodes */ | |
86009eb3 | 330 | #define MASTER_STANDBY_SHIFT 4 |
63c85238 PW |
331 | #define SLAVE_IDLE_SHIFT 0 |
332 | #define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT) | |
333 | #define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT) | |
334 | #define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT) | |
86009eb3 | 335 | #define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT) |
63c85238 PW |
336 | #define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) |
337 | #define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) | |
338 | #define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) | |
724019b0 | 339 | #define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT) |
63c85238 PW |
340 | |
341 | /* omap_hwmod_sysconfig.sysc_flags capability flags */ | |
342 | #define SYSC_HAS_AUTOIDLE (1 << 0) | |
343 | #define SYSC_HAS_SOFTRESET (1 << 1) | |
344 | #define SYSC_HAS_ENAWAKEUP (1 << 2) | |
345 | #define SYSC_HAS_EMUFREE (1 << 3) | |
346 | #define SYSC_HAS_CLOCKACTIVITY (1 << 4) | |
347 | #define SYSC_HAS_SIDLEMODE (1 << 5) | |
348 | #define SYSC_HAS_MIDLEMODE (1 << 6) | |
2cb06814 | 349 | #define SYSS_HAS_RESET_STATUS (1 << 7) |
883edfdd | 350 | #define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ |
2cb06814 | 351 | #define SYSC_HAS_RESET_STATUS (1 << 9) |
6668546f | 352 | #define SYSC_HAS_DMADISABLE (1 << 10) |
63c85238 PW |
353 | |
354 | /* omap_hwmod_sysconfig.clockact flags */ | |
355 | #define CLOCKACT_TEST_BOTH 0x0 | |
356 | #define CLOCKACT_TEST_MAIN 0x1 | |
357 | #define CLOCKACT_TEST_ICLK 0x2 | |
358 | #define CLOCKACT_TEST_NONE 0x3 | |
359 | ||
358f0e63 TG |
360 | /** |
361 | * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets. | |
362 | * @midle_shift: Offset of the midle bit | |
363 | * @clkact_shift: Offset of the clockactivity bit | |
364 | * @sidle_shift: Offset of the sidle bit | |
365 | * @enwkup_shift: Offset of the enawakeup bit | |
366 | * @srst_shift: Offset of the softreset bit | |
43b40992 | 367 | * @autoidle_shift: Offset of the autoidle bit |
6668546f | 368 | * @dmadisable_shift: Offset of the dmadisable bit |
358f0e63 TG |
369 | */ |
370 | struct omap_hwmod_sysc_fields { | |
371 | u8 midle_shift; | |
372 | u8 clkact_shift; | |
373 | u8 sidle_shift; | |
374 | u8 enwkup_shift; | |
375 | u8 srst_shift; | |
376 | u8 autoidle_shift; | |
6668546f | 377 | u8 dmadisable_shift; |
358f0e63 TG |
378 | }; |
379 | ||
63c85238 | 380 | /** |
43b40992 | 381 | * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data |
63c85238 PW |
382 | * @rev_offs: IP block revision register offset (from module base addr) |
383 | * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) | |
384 | * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) | |
d99de7f5 | 385 | * @srst_udelay: Delay needed after doing a softreset in usecs |
63c85238 PW |
386 | * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} |
387 | * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported | |
388 | * @clockact: the default value of the module CLOCKACTIVITY bits | |
389 | * | |
390 | * @clockact describes to the module which clocks are likely to be | |
391 | * disabled when the PRCM issues its idle request to the module. Some | |
392 | * modules have separate clockdomains for the interface clock and main | |
393 | * functional clock, and can check whether they should acknowledge the | |
394 | * idle request based on the internal module functionality that has | |
395 | * been associated with the clocks marked in @clockact. This field is | |
396 | * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below) | |
397 | * | |
358f0e63 TG |
398 | * @sysc_fields: structure containing the offset positions of various bits in |
399 | * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or | |
400 | * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on | |
401 | * whether the device ip is compliant with the original PRCM protocol | |
43b40992 PW |
402 | * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs. |
403 | * If the device follows a different scheme for the sysconfig register , | |
358f0e63 | 404 | * then this field has to be populated with the correct offset structure. |
63c85238 | 405 | */ |
43b40992 | 406 | struct omap_hwmod_class_sysconfig { |
515237d6 PW |
407 | u32 rev_offs; |
408 | u32 sysc_offs; | |
409 | u32 syss_offs; | |
56dc79ab | 410 | u16 sysc_flags; |
d99de7f5 FGL |
411 | struct omap_hwmod_sysc_fields *sysc_fields; |
412 | u8 srst_udelay; | |
63c85238 | 413 | u8 idlemodes; |
63c85238 PW |
414 | }; |
415 | ||
416 | /** | |
417 | * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data | |
418 | * @module_offs: PRCM submodule offset from the start of the PRM/CM | |
419 | * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3) | |
420 | * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs | |
421 | * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3) | |
422 | * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit | |
423 | * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit | |
424 | * | |
425 | * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST, | |
426 | * WKEN, GRPSEL registers. In an ideal world, no extra information | |
427 | * would be needed for IDLEST information, but alas, there are some | |
428 | * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit | |
429 | * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST) | |
430 | */ | |
431 | struct omap_hwmod_omap2_prcm { | |
432 | s16 module_offs; | |
433 | u8 prcm_reg_id; | |
434 | u8 module_bit; | |
435 | u8 idlest_reg_id; | |
436 | u8 idlest_idle_bit; | |
437 | u8 idlest_stdby_bit; | |
438 | }; | |
439 | ||
46b3af27 TK |
440 | /* |
441 | * Possible values for struct omap_hwmod_omap4_prcm.flags | |
442 | * | |
443 | * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM | |
444 | * module-level context loss register associated with them; this | |
445 | * flag bit should be set in those cases | |
60a5b875 DG |
446 | * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL |
447 | * offset of zero; this flag bit should be set in those cases to | |
448 | * distinguish from hwmods that have no clkctrl offset. | |
46b3af27 TK |
449 | */ |
450 | #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0) | |
60a5b875 | 451 | #define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1) |
63c85238 PW |
452 | |
453 | /** | |
454 | * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data | |
e6d3a8b0 RN |
455 | * @clkctrl_offs: offset of the PRCM clock control register |
456 | * @rstctrl_offs: offset of the XXX_RSTCTRL register located in the PRM | |
457 | * @context_offs: offset of the RM_*_CONTEXT register | |
ce80979a | 458 | * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register |
768c69f5 | 459 | * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM |
63c85238 | 460 | * @submodule_wkdep_bit: bit shift of the WKDEP range |
46b3af27 | 461 | * @flags: PRCM register capabilities for this IP block |
e6d3a8b0 RN |
462 | * @modulemode: allowable modulemodes |
463 | * @context_lost_counter: Count of module level context lost | |
ce80979a TK |
464 | * |
465 | * If @lostcontext_mask is not defined, context loss check code uses | |
466 | * whole register without masking. @lostcontext_mask should only be | |
467 | * defined in cases where @context_offs register is shared by two or | |
468 | * more hwmods. | |
63c85238 PW |
469 | */ |
470 | struct omap_hwmod_omap4_prcm { | |
d0f0631d | 471 | u16 clkctrl_offs; |
eaac329d | 472 | u16 rstctrl_offs; |
768c69f5 | 473 | u16 rstst_offs; |
27bb00b5 | 474 | u16 context_offs; |
ce80979a | 475 | u32 lostcontext_mask; |
53934aa7 | 476 | u8 submodule_wkdep_bit; |
03fdefe5 | 477 | u8 modulemode; |
46b3af27 | 478 | u8 flags; |
e6d3a8b0 | 479 | int context_lost_counter; |
63c85238 PW |
480 | }; |
481 | ||
482 | ||
483 | /* | |
484 | * omap_hwmod.flags definitions | |
485 | * | |
486 | * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out | |
487 | * of idle, rather than relying on module smart-idle | |
092bc089 GI |
488 | * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and |
489 | * out of standby, rather than relying on module smart-standby | |
63c85238 | 490 | * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for |
b56b7bc8 | 491 | * SDRAM controller, etc. XXX probably belongs outside the main hwmod file |
550c8092 | 492 | * XXX Should be HWMOD_SETUP_NO_RESET |
63c85238 | 493 | * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM |
b56b7bc8 | 494 | * controller, etc. XXX probably belongs outside the main hwmod file |
550c8092 | 495 | * XXX Should be HWMOD_SETUP_NO_IDLE |
4d2274c5 | 496 | * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE) |
726072e5 PW |
497 | * when module is enabled, rather than the default, which is to |
498 | * enable autoidle | |
63c85238 | 499 | * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup |
bd36179e | 500 | * HWMOD_NO_IDLEST: this module does not have idle status - this is the case |
33f7ec81 | 501 | * only for few initiator modules on OMAP2 & 3. |
96835af9 BC |
502 | * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset. |
503 | * This is needed for devices like DSS that require optional clocks enabled | |
504 | * in order to complete the reset. Optional clocks will be disabled | |
505 | * again after the reset. | |
cc7a1d2a | 506 | * HWMOD_16BIT_REG: Module has 16bit registers |
5fb3d522 PW |
507 | * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for |
508 | * this IP block comes from an off-chip source and is not always | |
509 | * enabled. This prevents the hwmod code from being able to | |
510 | * enable and reset the IP block early. XXX Eventually it should | |
511 | * be possible to query the clock framework for this information. | |
fa200222 PW |
512 | * HWMOD_BLOCK_WFI: Some OMAP peripherals apparently don't work |
513 | * correctly if the MPU is allowed to go idle while the | |
514 | * peripherals are active. This is apparently true for the I2C on | |
515 | * OMAP2420, and also the EMAC on AM3517/3505. It's unlikely that | |
516 | * this is really true -- we're probably not configuring something | |
517 | * correctly, or this is being abused to deal with some PM latency | |
518 | * issues -- but we're currently suffering from a shortage of | |
519 | * folks who are able to track these issues down properly. | |
092bc089 GI |
520 | * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device |
521 | * is kept in force-standby mode. Failing to do so causes PM problems | |
522 | * with musb on OMAP3630 at least. Note that musb has a dedicated register | |
523 | * to control MSTANDBY signal when MIDLEMODE is set to force-standby. | |
ca43ea34 RN |
524 | * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module |
525 | * out of idle, but rely on smart-idle to the put it back in idle, | |
526 | * so the wakeups are still functional (Only known case for now is UART) | |
6a08b11a TL |
527 | * HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up |
528 | * events by calling _reconfigure_io_chain() when a device is enabled | |
529 | * or idled. | |
c12ba8ce PU |
530 | * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to |
531 | * operate and they need to be handled at the same time as the main_clk. | |
2e18f5a1 LV |
532 | * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain |
533 | * IPs like CPSW on DRA7, where clocks to this module cannot be disabled. | |
8ff42da4 RQ |
534 | * HWMOD_CLKDM_NOAUTO: Allows the hwmod's clockdomain to be prevented from |
535 | * entering HW_AUTO while hwmod is active. This is needed to workaround | |
536 | * some modules which don't function correctly with HW_AUTO. For example, | |
537 | * DCAN on DRA7x SoC needs this to workaround errata i893. | |
63c85238 PW |
538 | */ |
539 | #define HWMOD_SWSUP_SIDLE (1 << 0) | |
540 | #define HWMOD_SWSUP_MSTANDBY (1 << 1) | |
541 | #define HWMOD_INIT_NO_RESET (1 << 2) | |
542 | #define HWMOD_INIT_NO_IDLE (1 << 3) | |
726072e5 PW |
543 | #define HWMOD_NO_OCP_AUTOIDLE (1 << 4) |
544 | #define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) | |
33f7ec81 | 545 | #define HWMOD_NO_IDLEST (1 << 6) |
96835af9 | 546 | #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) |
cc7a1d2a | 547 | #define HWMOD_16BIT_REG (1 << 8) |
5fb3d522 | 548 | #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) |
fa200222 | 549 | #define HWMOD_BLOCK_WFI (1 << 10) |
092bc089 | 550 | #define HWMOD_FORCE_MSTANDBY (1 << 11) |
ca43ea34 | 551 | #define HWMOD_SWSUP_SIDLE_ACT (1 << 12) |
6a08b11a | 552 | #define HWMOD_RECONFIG_IO_CHAIN (1 << 13) |
c12ba8ce | 553 | #define HWMOD_OPT_CLKS_NEEDED (1 << 14) |
2e18f5a1 | 554 | #define HWMOD_NO_IDLE (1 << 15) |
8ff42da4 | 555 | #define HWMOD_CLKDM_NOAUTO (1 << 16) |
63c85238 PW |
556 | |
557 | /* | |
558 | * omap_hwmod._int_flags definitions | |
559 | * These are for internal use only and are managed by the omap_hwmod code. | |
560 | * | |
561 | * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module | |
63c85238 | 562 | * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached |
aacf0941 RN |
563 | * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - |
564 | * causes the first call to _enable() to only update the pinmux | |
63c85238 PW |
565 | */ |
566 | #define _HWMOD_NO_MPU_PORT (1 << 0) | |
4280943b RN |
567 | #define _HWMOD_SYSCONFIG_LOADED (1 << 1) |
568 | #define _HWMOD_SKIP_ENABLE (1 << 2) | |
63c85238 PW |
569 | |
570 | /* | |
571 | * omap_hwmod._state definitions | |
572 | * | |
573 | * INITIALIZED: reset (optionally), initialized, enabled, disabled | |
574 | * (optionally) | |
575 | * | |
576 | * | |
577 | */ | |
578 | #define _HWMOD_STATE_UNKNOWN 0 | |
579 | #define _HWMOD_STATE_REGISTERED 1 | |
580 | #define _HWMOD_STATE_CLKS_INITED 2 | |
581 | #define _HWMOD_STATE_INITIALIZED 3 | |
582 | #define _HWMOD_STATE_ENABLED 4 | |
583 | #define _HWMOD_STATE_IDLE 5 | |
584 | #define _HWMOD_STATE_DISABLED 6 | |
585 | ||
43b40992 PW |
586 | /** |
587 | * struct omap_hwmod_class - the type of an IP block | |
588 | * @name: name of the hwmod_class | |
589 | * @sysc: device SYSCONFIG/SYSSTATUS register data | |
590 | * @rev: revision of the IP class | |
e4dc8f50 | 591 | * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown |
bd36179e | 592 | * @reset: ptr to fn to be executed in place of the standard hwmod reset fn |
6d266f63 | 593 | * @enable_preprogram: ptr to fn to be executed during device enable |
aaf2c0fb LV |
594 | * @lock: ptr to fn to be executed to lock IP registers |
595 | * @unlock: ptr to fn to be executed to unlock IP registers | |
43b40992 PW |
596 | * |
597 | * Represent the class of a OMAP hardware "modules" (e.g. timer, | |
598 | * smartreflex, gpio, uart...) | |
e4dc8f50 PW |
599 | * |
600 | * @pre_shutdown is a function that will be run immediately before | |
601 | * hwmod clocks are disabled, etc. It is intended for use for hwmods | |
602 | * like the MPU watchdog, which cannot be disabled with the standard | |
603 | * omap_hwmod_shutdown(). The function should return 0 upon success, | |
604 | * or some negative error upon failure. Returning an error will cause | |
605 | * omap_hwmod_shutdown() to abort the device shutdown and return an | |
606 | * error. | |
bd36179e PW |
607 | * |
608 | * If @reset is defined, then the function it points to will be | |
609 | * executed in place of the standard hwmod _reset() code in | |
610 | * mach-omap2/omap_hwmod.c. This is needed for IP blocks which have | |
611 | * unusual reset sequences - usually processor IP blocks like the IVA. | |
43b40992 PW |
612 | */ |
613 | struct omap_hwmod_class { | |
614 | const char *name; | |
615 | struct omap_hwmod_class_sysconfig *sysc; | |
616 | u32 rev; | |
e4dc8f50 | 617 | int (*pre_shutdown)(struct omap_hwmod *oh); |
bd36179e | 618 | int (*reset)(struct omap_hwmod *oh); |
6d266f63 | 619 | int (*enable_preprogram)(struct omap_hwmod *oh); |
aaf2c0fb LV |
620 | void (*lock)(struct omap_hwmod *oh); |
621 | void (*unlock)(struct omap_hwmod *oh); | |
43b40992 PW |
622 | }; |
623 | ||
63c85238 PW |
624 | /** |
625 | * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks) | |
626 | * @name: name of the hwmod | |
43b40992 | 627 | * @class: struct omap_hwmod_class * to the class of this hwmod |
63c85238 | 628 | * @od: struct omap_device currently associated with this hwmod (internal use) |
212738a4 | 629 | * @mpu_irqs: ptr to an array of MPU IRQs |
bc614958 | 630 | * @sdma_reqs: ptr to an array of System DMA request IDs |
63c85238 | 631 | * @prcm: PRCM data pertaining to this hwmod |
50ebdac2 | 632 | * @main_clk: main clock: OMAP clock name |
63c85238 PW |
633 | * @_clk: pointer to the main struct clk (filled in at runtime) |
634 | * @opt_clks: other device clocks that drivers can request (0..*) | |
3b92408c | 635 | * @voltdm: pointer to voltage domain (filled in at runtime) |
63c85238 PW |
636 | * @dev_attr: arbitrary device attributes that can be passed to the driver |
637 | * @_sysc_cache: internal-use hwmod flags | |
130142d9 | 638 | * @mpu_rt_idx: index of device address space for register target (for DT boot) |
db2a60bf | 639 | * @_mpu_rt_va: cached register target start address (internal use) |
2221b5cd | 640 | * @_mpu_port: cached MPU register target slave (internal use) |
63c85238 PW |
641 | * @opt_clks_cnt: number of @opt_clks |
642 | * @master_cnt: number of @master entries | |
643 | * @slaves_cnt: number of @slave entries | |
644 | * @response_lat: device OCP response latency (in interface clock cycles) | |
645 | * @_int_flags: internal-use hwmod flags | |
646 | * @_state: internal-use hwmod state | |
2092e5cc | 647 | * @_postsetup_state: internal-use state to leave the hwmod in after _setup() |
63c85238 | 648 | * @flags: hwmod flags (documented below) |
dc6d1cda | 649 | * @_lock: spinlock serializing operations on this hwmod |
63c85238 | 650 | * @node: list node for hwmod list (internal use) |
f22d2545 | 651 | * @parent_hwmod: (temporary) a pointer to the hierarchical parent of this hwmod |
63c85238 | 652 | * |
50ebdac2 PW |
653 | * @main_clk refers to this module's "main clock," which for our |
654 | * purposes is defined as "the functional clock needed for register | |
655 | * accesses to complete." Modules may not have a main clock if the | |
656 | * interface clock also serves as a main clock. | |
63c85238 PW |
657 | * |
658 | * Parameter names beginning with an underscore are managed internally by | |
659 | * the omap_hwmod code and should not be set during initialization. | |
2221b5cd PW |
660 | * |
661 | * @masters and @slaves are now deprecated. | |
f22d2545 TV |
662 | * |
663 | * @parent_hwmod is temporary; there should be no need for it, as this | |
664 | * information should already be expressed in the OCP interface | |
665 | * structures. @parent_hwmod is present as a workaround until we improve | |
666 | * handling for hwmods with multiple parents (e.g., OMAP4+ DSS with | |
667 | * multiple register targets across different interconnects). | |
63c85238 PW |
668 | */ |
669 | struct omap_hwmod { | |
670 | const char *name; | |
43b40992 | 671 | struct omap_hwmod_class *class; |
63c85238 | 672 | struct omap_device *od; |
9796b323 | 673 | struct omap_hwmod_mux_info *mux; |
718bfd76 | 674 | struct omap_hwmod_irq_info *mpu_irqs; |
9ee9fff9 | 675 | struct omap_hwmod_dma_info *sdma_reqs; |
5365efbe | 676 | struct omap_hwmod_rst_info *rst_lines; |
63c85238 PW |
677 | union { |
678 | struct omap_hwmod_omap2_prcm omap2; | |
679 | struct omap_hwmod_omap4_prcm omap4; | |
680 | } prcm; | |
50ebdac2 | 681 | const char *main_clk; |
63c85238 PW |
682 | struct clk *_clk; |
683 | struct omap_hwmod_opt_clk *opt_clks; | |
3cdf2f80 | 684 | const char *clkdm_name; |
6ae76997 | 685 | struct clockdomain *clkdm; |
2221b5cd | 686 | struct list_head slave_ports; /* connect to *_TA */ |
63c85238 PW |
687 | void *dev_attr; |
688 | u32 _sysc_cache; | |
db2a60bf | 689 | void __iomem *_mpu_rt_va; |
dc6d1cda | 690 | spinlock_t _lock; |
69317952 | 691 | struct lock_class_key hwmod_key; /* unique lock class */ |
63c85238 | 692 | struct list_head node; |
2221b5cd | 693 | struct omap_hwmod_ocp_if *_mpu_port; |
0fb22a8f | 694 | unsigned int (*xlate_irq)(unsigned int); |
390c0682 | 695 | u32 flags; |
130142d9 | 696 | u8 mpu_rt_idx; |
63c85238 | 697 | u8 response_lat; |
5365efbe | 698 | u8 rst_lines_cnt; |
63c85238 | 699 | u8 opt_clks_cnt; |
63c85238 PW |
700 | u8 slaves_cnt; |
701 | u8 hwmods_cnt; | |
702 | u8 _int_flags; | |
703 | u8 _state; | |
2092e5cc | 704 | u8 _postsetup_state; |
f22d2545 | 705 | struct omap_hwmod *parent_hwmod; |
63c85238 PW |
706 | }; |
707 | ||
63c85238 | 708 | struct omap_hwmod *omap_hwmod_lookup(const char *name); |
97d60162 PW |
709 | int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), |
710 | void *data); | |
63c85238 | 711 | |
a2debdbd | 712 | int __init omap_hwmod_setup_one(const char *name); |
63c85238 PW |
713 | |
714 | int omap_hwmod_enable(struct omap_hwmod *oh); | |
715 | int omap_hwmod_idle(struct omap_hwmod *oh); | |
716 | int omap_hwmod_shutdown(struct omap_hwmod *oh); | |
717 | ||
aee48e3c PW |
718 | int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); |
719 | int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); | |
63c85238 | 720 | |
cc7a1d2a RN |
721 | void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); |
722 | u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); | |
6d3c55fd | 723 | int omap_hwmod_softreset(struct omap_hwmod *oh); |
63c85238 | 724 | |
dad4191d | 725 | int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags); |
63c85238 | 726 | int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); |
b82b04e8 | 727 | int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); |
5e8370f1 PW |
728 | int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, |
729 | const char *name, struct resource *res); | |
63c85238 PW |
730 | |
731 | struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); | |
db2a60bf | 732 | void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); |
63c85238 | 733 | |
63c85238 PW |
734 | int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); |
735 | int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); | |
736 | ||
43b40992 PW |
737 | int omap_hwmod_for_each_by_class(const char *classname, |
738 | int (*fn)(struct omap_hwmod *oh, | |
739 | void *user), | |
740 | void *user); | |
741 | ||
2092e5cc | 742 | int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state); |
fc013873 | 743 | int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); |
2092e5cc | 744 | |
9ebfd285 KH |
745 | extern void __init omap_hwmod_init(void); |
746 | ||
68c9a95e TL |
747 | const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); |
748 | ||
c02060d8 PW |
749 | /* |
750 | * | |
751 | */ | |
752 | ||
753 | extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh); | |
461932df LV |
754 | void omap_hwmod_rtc_unlock(struct omap_hwmod *oh); |
755 | void omap_hwmod_rtc_lock(struct omap_hwmod *oh); | |
c02060d8 | 756 | |
7359154e PW |
757 | /* |
758 | * Chip variant-specific hwmod init routines - XXX should be converted | |
759 | * to use initcalls once the initial boot ordering is straightened out | |
760 | */ | |
761 | extern int omap2420_hwmod_init(void); | |
762 | extern int omap2430_hwmod_init(void); | |
763 | extern int omap3xxx_hwmod_init(void); | |
55d2cb08 | 764 | extern int omap44xx_hwmod_init(void); |
08e4830d | 765 | extern int omap54xx_hwmod_init(void); |
a2cfc509 | 766 | extern int am33xx_hwmod_init(void); |
0f3ccb24 TL |
767 | extern int dm814x_hwmod_init(void); |
768 | extern int dm816x_hwmod_init(void); | |
90020c7b | 769 | extern int dra7xx_hwmod_init(void); |
6913952f | 770 | int am43xx_hwmod_init(void); |
7359154e | 771 | |
2221b5cd PW |
772 | extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois); |
773 | ||
63c85238 | 774 | #endif |