[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / arm / mach-omap1 / devices.c

/*
 * linux/arch/arm/mach-omap1/devices.c
 *
 * OMAP1 platform device setup/initialization
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/spi/spi.h>

#include <mach/camera.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>

#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>

/*-------------------------------------------------------------------------*/

#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)

#define	OMAP_RTC_BASE		0xfffb4800

static struct resource rtc_resources[] = {
	{
		.start		= OMAP_RTC_BASE,
		.end		= OMAP_RTC_BASE + 0x5f,
		.flags		= IORESOURCE_MEM,
	},
	{
		.start		= INT_RTC_TIMER,
		.flags		= IORESOURCE_IRQ,
	},
	{
		.start		= INT_RTC_ALARM,
		.flags		= IORESOURCE_IRQ,
	},
};

static struct platform_device omap_rtc_device = {
	.name           = "omap_rtc",
	.id             = -1,
	.num_resources	= ARRAY_SIZE(rtc_resources),
	.resource	= rtc_resources,
};

static void omap_init_rtc(void)
{
	(void) platform_device_register(&omap_rtc_device);
}
#else
static inline void omap_init_rtc(void) {}
#endif

static inline void omap_init_mbox(void) { }

/*-------------------------------------------------------------------------*/

#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)

static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
			int controller_nr)
{
	if (controller_nr == 0) {
		if (cpu_is_omap7xx()) {
			omap_cfg_reg(MMC_7XX_CMD);
			omap_cfg_reg(MMC_7XX_CLK);
			omap_cfg_reg(MMC_7XX_DAT0);
		} else {
			omap_cfg_reg(MMC_CMD);
			omap_cfg_reg(MMC_CLK);
			omap_cfg_reg(MMC_DAT0);
		}

		if (cpu_is_omap1710()) {
			omap_cfg_reg(M15_1710_MMC_CLKI);
			omap_cfg_reg(P19_1710_MMC_CMDDIR);
			omap_cfg_reg(P20_1710_MMC_DATDIR0);
		}
		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
			omap_cfg_reg(MMC_DAT1);
			/* NOTE: DAT2 can be on W10 (here) or M15 */
			if (!mmc_controller->slots[0].nomux)
				omap_cfg_reg(MMC_DAT2);
			omap_cfg_reg(MMC_DAT3);
		}
	}

	/* Block 2 is on newer chips, and has many pinout options */
	if (cpu_is_omap16xx() && controller_nr == 1) {
		if (!mmc_controller->slots[1].nomux) {
			omap_cfg_reg(Y8_1610_MMC2_CMD);
			omap_cfg_reg(Y10_1610_MMC2_CLK);
			omap_cfg_reg(R18_1610_MMC2_CLKIN);
			omap_cfg_reg(W8_1610_MMC2_DAT0);
			if (mmc_controller->slots[1].wires == 4) {
				omap_cfg_reg(V8_1610_MMC2_DAT1);
				omap_cfg_reg(W15_1610_MMC2_DAT2);
				omap_cfg_reg(R10_1610_MMC2_DAT3);
			}

			/* These are needed for the level shifter */
			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
		}

		/* Feedback clock must be set on OMAP-1710 MMC2 */
		if (cpu_is_omap1710())
			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
					MOD_CONF_CTRL_1);
	}
}

void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
			int nr_controllers)
{
	int i;

	for (i = 0; i < nr_controllers; i++) {
		unsigned long base, size;
		unsigned int irq = 0;

		if (!mmc_data[i])
			continue;

		omap1_mmc_mux(mmc_data[i], i);

		switch (i) {
		case 0:
			base = OMAP1_MMC1_BASE;
			irq = INT_MMC;
			break;
		case 1:
			if (!cpu_is_omap16xx())
				return;
			base = OMAP1_MMC2_BASE;
			irq = INT_1610_MMC2;
			break;
		default:
			continue;
		}
		size = OMAP1_MMC_SIZE;

		omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
	};
}

#endif

/*-------------------------------------------------------------------------*/

/* OMAP7xx SPI support */
#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)

struct platform_device omap_spi1 = {
	.name           = "omap1_spi100k",
	.id             = 1,
};

struct platform_device omap_spi2 = {
	.name           = "omap1_spi100k",
	.id             = 2,
};

static void omap_init_spi100k(void)
{
	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
	if (omap_spi1.dev.platform_data)
		platform_device_register(&omap_spi1);

	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
	if (omap_spi2.dev.platform_data)
		platform_device_register(&omap_spi2);
}

#else
static inline void omap_init_spi100k(void)
{
}
#endif


#define OMAP1_CAMERA_BASE	0xfffb6800
#define OMAP1_CAMERA_IOSIZE	0x1c

static struct resource omap1_camera_resources[] = {
	[0] = {
		.start	= OMAP1_CAMERA_BASE,
		.end	= OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= INT_CAMERA,
		.flags	= IORESOURCE_IRQ,
	},
};

static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);

static struct platform_device omap1_camera_device = {
	.name		= "omap1-camera",
	.id		= 0, /* This is used to put cameras on this interface */
	.dev		= {
		.dma_mask		= &omap1_camera_dma_mask,
		.coherent_dma_mask	= DMA_BIT_MASK(32),
	},
	.num_resources	= ARRAY_SIZE(omap1_camera_resources),
	.resource	= omap1_camera_resources,
};

void __init omap1_camera_init(void *info)
{
	struct platform_device *dev = &omap1_camera_device;
	int ret;

	dev->dev.platform_data = info;

	ret = platform_device_register(dev);
	if (ret)
		dev_err(&dev->dev, "unable to register device: %d\n", ret);
}


/*-------------------------------------------------------------------------*/

static inline void omap_init_sti(void) {}

#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)

static struct platform_device omap_pcm = {
	.name	= "omap-pcm-audio",
	.id	= -1,
};

OMAP_MCBSP_PLATFORM_DEVICE(1);
OMAP_MCBSP_PLATFORM_DEVICE(2);
OMAP_MCBSP_PLATFORM_DEVICE(3);

static void omap_init_audio(void)
{
	platform_device_register(&omap_mcbsp1);
	platform_device_register(&omap_mcbsp2);
	if (!cpu_is_omap7xx())
		platform_device_register(&omap_mcbsp3);
	platform_device_register(&omap_pcm);
}

#else
static inline void omap_init_audio(void) {}
#endif

/*-------------------------------------------------------------------------*/

/*
 * This gets called after board-specific INIT_MACHINE, and initializes most
 * on-chip peripherals accessible on this board (except for few like USB):
 *
 *  (a) Does any "standard config" pin muxing needed.  Board-specific
 *	code will have muxed GPIO pins and done "nonstandard" setup;
 *	that code could live in the boot loader.
 *  (b) Populating board-specific platform_data with the data drivers
 *	rely on to handle wiring variations.
 *  (c) Creating platform devices as meaningful on this board and
 *	with this kernel configuration.
 *
 * Claiming GPIOs, and setting their direction and initial values, is the
 * responsibility of the device drivers.  So is responding to probe().
 *
 * Board-specific knowledge like creating devices or pin setup is to be
 * kept out of drivers as much as possible.  In particular, pin setup
 * may be handled by the boot loader, and drivers should expect it will
 * normally have been done by the time they're probed.
 */
static int __init omap1_init_devices(void)
{
	if (!cpu_class_is_omap1())
		return -ENODEV;

	/* please keep these calls, and their implementations above,
	 * in alphabetical order so they're easier to sort through.
	 */

	omap_init_mbox();
	omap_init_rtc();
	omap_init_spi100k();
	omap_init_sti();
	omap_init_audio();

	return 0;
}
arch_initcall(omap1_init_devices);

#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)

static struct resource wdt_resources[] = {
	{
		.start		= 0xfffeb000,
		.end		= 0xfffeb07F,
		.flags		= IORESOURCE_MEM,
	},
};

static struct platform_device omap_wdt_device = {
	.name	   = "omap_wdt",
	.id	     = -1,
	.num_resources	= ARRAY_SIZE(wdt_resources),
	.resource	= wdt_resources,
};

static int __init omap_init_wdt(void)
{
	if (!cpu_is_omap16xx())
		return -ENODEV;

	return platform_device_register(&omap_wdt_device);
}
subsys_initcall(omap_init_wdt);
#endif
Commit	Line	Data
7c38cf02 TL	1	/*
	2	* linux/arch/arm/mach-omap1/devices.c
	3	*
	4	* OMAP1 platform device setup/initialization
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*/
	11
1a96edd7	12	#include <linux/dma-mapping.h>
7c38cf02 TL	13	#include <linux/module.h>
	14	#include <linux/kernel.h>
	15	#include <linux/init.h>
d052d1be	16	#include <linux/platform_device.h>
fced80c7	17	#include <linux/io.h>
c5c4dce4	18	#include <linux/spi/spi.h>
7c38cf02	19
706afdda	20	#include <mach/camera.h>
a09e64fb	21	#include <mach/hardware.h>
7c38cf02 TL	22	#include <asm/mach/map.h>
7c38cf02 TL	23
ce491cf8 TL	24	#include <plat/tc.h>
	25	#include <plat/board.h>
	26	#include <plat/mux.h>
a09e64fb	27	#include <mach/gpio.h>
ce491cf8	28	#include <plat/mmc.h>
c5c4dce4	29	#include <plat/omap7xx.h>
f0fba2ad	30	#include <plat/mcbsp.h>
7c38cf02	31
7c38cf02 TL	32	/-------------------------------------------------------------------------/
7c38cf02 TL	33
db68b189	34	#if defined(CONFIG_RTC_DRV_OMAP) \|\| defined(CONFIG_RTC_DRV_OMAP_MODULE)
7c38cf02 TL	35
	36	#define OMAP_RTC_BASE 0xfffb4800
	37
	38	static struct resource rtc_resources[] = {
	39	{
	40	.start = OMAP_RTC_BASE,
	41	.end = OMAP_RTC_BASE + 0x5f,
	42	.flags = IORESOURCE_MEM,
	43	},
	44	{
	45	.start = INT_RTC_TIMER,
	46	.flags = IORESOURCE_IRQ,
	47	},
	48	{
	49	.start = INT_RTC_ALARM,
	50	.flags = IORESOURCE_IRQ,
	51	},
	52	};
	53
	54	static struct platform_device omap_rtc_device = {
	55	.name = "omap_rtc",
	56	.id = -1,
7c38cf02 TL	57	.num_resources = ARRAY_SIZE(rtc_resources),
	58	.resource = rtc_resources,
	59	};
	60
	61	static void omap_init_rtc(void)
	62	{
	63	(void) platform_device_register(&omap_rtc_device);
	64	}
	65	#else
	66	static inline void omap_init_rtc(void) {}
	67	#endif
	68
c40fae95	69	static inline void omap_init_mbox(void) { }
c40fae95	70
d8874665 TL	71	/-------------------------------------------------------------------------/
	72
	73	#if defined(CONFIG_MMC_OMAP) \|\| defined(CONFIG_MMC_OMAP_MODULE)
	74
	75	static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
	76	int controller_nr)
	77	{
	78	if (controller_nr == 0) {
490a5665 CM	79	if (cpu_is_omap7xx()) {
	80	omap_cfg_reg(MMC_7XX_CMD);
	81	omap_cfg_reg(MMC_7XX_CLK);
	82	omap_cfg_reg(MMC_7XX_DAT0);
	83	} else {
	84	omap_cfg_reg(MMC_CMD);
	85	omap_cfg_reg(MMC_CLK);
	86	omap_cfg_reg(MMC_DAT0);
	87	}
	88
d8874665 TL	89	if (cpu_is_omap1710()) {
	90	omap_cfg_reg(M15_1710_MMC_CLKI);
	91	omap_cfg_reg(P19_1710_MMC_CMDDIR);
	92	omap_cfg_reg(P20_1710_MMC_DATDIR0);
	93	}
490a5665	94	if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
d8874665 TL	95	omap_cfg_reg(MMC_DAT1);
	96	/* NOTE: DAT2 can be on W10 (here) or M15 */
	97	if (!mmc_controller->slots[0].nomux)
	98	omap_cfg_reg(MMC_DAT2);
	99	omap_cfg_reg(MMC_DAT3);
	100	}
	101	}
	102
	103	/* Block 2 is on newer chips, and has many pinout options */
	104	if (cpu_is_omap16xx() && controller_nr == 1) {
	105	if (!mmc_controller->slots[1].nomux) {
	106	omap_cfg_reg(Y8_1610_MMC2_CMD);
	107	omap_cfg_reg(Y10_1610_MMC2_CLK);
	108	omap_cfg_reg(R18_1610_MMC2_CLKIN);
	109	omap_cfg_reg(W8_1610_MMC2_DAT0);
90c62bf0	110	if (mmc_controller->slots[1].wires == 4) {
d8874665 TL	111	omap_cfg_reg(V8_1610_MMC2_DAT1);
	112	omap_cfg_reg(W15_1610_MMC2_DAT2);
	113	omap_cfg_reg(R10_1610_MMC2_DAT3);
	114	}
	115
	116	/* These are needed for the level shifter */
	117	omap_cfg_reg(V9_1610_MMC2_CMDDIR);
	118	omap_cfg_reg(V5_1610_MMC2_DATDIR0);
	119	omap_cfg_reg(W19_1610_MMC2_DATDIR1);
	120	}
	121
	122	/* Feedback clock must be set on OMAP-1710 MMC2 */
	123	if (cpu_is_omap1710())
	124	omap_writel(omap_readl(MOD_CONF_CTRL_1) \| (1 << 24),
	125	MOD_CONF_CTRL_1);
	126	}
	127	}
	128
	129	void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
	130	int nr_controllers)
	131	{
	132	int i;
	133
	134	for (i = 0; i < nr_controllers; i++) {
	135	unsigned long base, size;
	136	unsigned int irq = 0;
	137
	138	if (!mmc_data[i])
	139	continue;
	140
	141	omap1_mmc_mux(mmc_data[i], i);
	142
	143	switch (i) {
	144	case 0:
	145	base = OMAP1_MMC1_BASE;
	146	irq = INT_MMC;
	147	break;
	148	case 1:
	149	if (!cpu_is_omap16xx())
	150	return;
	151	base = OMAP1_MMC2_BASE;
	152	irq = INT_1610_MMC2;
	153	break;
	154	default:
	155	continue;
	156	}
	157	size = OMAP1_MMC_SIZE;
	158
0dffb5c5	159	omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
d8874665 TL	160	};
	161	}
	162
	163	#endif
	164
	165	/-------------------------------------------------------------------------/
	166
c5c4dce4 CM	167	/* OMAP7xx SPI support */
	168	#if defined(CONFIG_SPI_OMAP_100K) \|\| defined(CONFIG_SPI_OMAP_100K_MODULE)
	169
	170	struct platform_device omap_spi1 = {
	171	.name = "omap1_spi100k",
	172	.id = 1,
	173	};
	174
	175	struct platform_device omap_spi2 = {
	176	.name = "omap1_spi100k",
	177	.id = 2,
	178	};
	179
	180	static void omap_init_spi100k(void)
	181	{
	182	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
	183	if (omap_spi1.dev.platform_data)
	184	platform_device_register(&omap_spi1);
	185
	186	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
	187	if (omap_spi2.dev.platform_data)
	188	platform_device_register(&omap_spi2);
	189	}
	190
	191	#else
	192	static inline void omap_init_spi100k(void)
	193	{
	194	}
	195	#endif
	196
1a96edd7 JK	197
	198	#define OMAP1_CAMERA_BASE 0xfffb6800
	199	#define OMAP1_CAMERA_IOSIZE 0x1c
	200
	201	static struct resource omap1_camera_resources[] = {
	202	[0] = {
	203	.start = OMAP1_CAMERA_BASE,
	204	.end = OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
	205	.flags = IORESOURCE_MEM,
	206	},
	207	[1] = {
	208	.start = INT_CAMERA,
	209	.flags = IORESOURCE_IRQ,
	210	},
	211	};
	212
	213	static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);
	214
	215	static struct platform_device omap1_camera_device = {
	216	.name = "omap1-camera",
	217	.id = 0, /* This is used to put cameras on this interface */
	218	.dev = {
	219	.dma_mask = &omap1_camera_dma_mask,
	220	.coherent_dma_mask = DMA_BIT_MASK(32),
	221	},
	222	.num_resources = ARRAY_SIZE(omap1_camera_resources),
	223	.resource = omap1_camera_resources,
	224	};
	225
	226	void __init omap1_camera_init(void *info)
	227	{
	228	struct platform_device *dev = &omap1_camera_device;
	229	int ret;
	230
	231	dev->dev.platform_data = info;
	232
	233	ret = platform_device_register(dev);
	234	if (ret)
	235	dev_err(&dev->dev, "unable to register device: %d\n", ret);
	236	}
	237
	238
c5c4dce4 CM	239	/-------------------------------------------------------------------------/
c5c4dce4 CM	240
9b6553cd	241	static inline void omap_init_sti(void) {}
7c38cf02	242
f0fba2ad LG	243	#if defined(CONFIG_SND_SOC) \|\| defined(CONFIG_SND_SOC_MODULE)
	244
	245	static struct platform_device omap_pcm = {
	246	.name = "omap-pcm-audio",
	247	.id = -1,
	248	};
	249
	250	OMAP_MCBSP_PLATFORM_DEVICE(1);
	251	OMAP_MCBSP_PLATFORM_DEVICE(2);
	252	OMAP_MCBSP_PLATFORM_DEVICE(3);
	253
	254	static void omap_init_audio(void)
	255	{
	256	platform_device_register(&omap_mcbsp1);
	257	platform_device_register(&omap_mcbsp2);
	258	if (!cpu_is_omap7xx())
	259	platform_device_register(&omap_mcbsp3);
	260	platform_device_register(&omap_pcm);
	261	}
	262
	263	#else
	264	static inline void omap_init_audio(void) {}
	265	#endif
	266
7c38cf02 TL	267	/-------------------------------------------------------------------------/
	268
	269	/*
	270	* This gets called after board-specific INIT_MACHINE, and initializes most
	271	* on-chip peripherals accessible on this board (except for few like USB):
	272	*
	273	* (a) Does any "standard config" pin muxing needed. Board-specific
	274	* code will have muxed GPIO pins and done "nonstandard" setup;
	275	* that code could live in the boot loader.
	276	* (b) Populating board-specific platform_data with the data drivers
	277	* rely on to handle wiring variations.
	278	* (c) Creating platform devices as meaningful on this board and
	279	* with this kernel configuration.
	280	*
	281	* Claiming GPIOs, and setting their direction and initial values, is the
	282	* responsibility of the device drivers. So is responding to probe().
	283	*
25985edc	284	* Board-specific knowledge like creating devices or pin setup is to be
7c38cf02 TL	285	* kept out of drivers as much as possible. In particular, pin setup
	286	* may be handled by the boot loader, and drivers should expect it will
	287	* normally have been done by the time they're probed.
	288	*/
3179a019	289	static int __init omap1_init_devices(void)
7c38cf02	290	{
7f9187c2 TL	291	if (!cpu_class_is_omap1())
	292	return -ENODEV;
	293
7c38cf02 TL	294	/* please keep these calls, and their implementations above,
	295	* in alphabetical order so they're easier to sort through.
	296	*/
c40fae95 TL	297
c40fae95 TL	298	omap_init_mbox();
7c38cf02	299	omap_init_rtc();
c5c4dce4	300	omap_init_spi100k();
9b6553cd	301	omap_init_sti();
f0fba2ad	302	omap_init_audio();
7c38cf02 TL	303
	304	return 0;
	305	}
3179a019	306	arch_initcall(omap1_init_devices);
7c38cf02	307
f2ce6231 VC	308	#if defined(CONFIG_OMAP_WATCHDOG) \|\| defined(CONFIG_OMAP_WATCHDOG_MODULE)
	309
	310	static struct resource wdt_resources[] = {
	311	{
	312	.start = 0xfffeb000,
	313	.end = 0xfffeb07F,
	314	.flags = IORESOURCE_MEM,
	315	},
	316	};
	317
	318	static struct platform_device omap_wdt_device = {
	319	.name = "omap_wdt",
	320	.id = -1,
	321	.num_resources = ARRAY_SIZE(wdt_resources),
	322	.resource = wdt_resources,
	323	};
	324
	325	static int __init omap_init_wdt(void)
	326	{
	327	if (!cpu_is_omap16xx())
dfcccd3a	328	return -ENODEV;
f2ce6231	329
dfcccd3a	330	return platform_device_register(&omap_wdt_device);
f2ce6231 VC	331	}
	332	subsys_initcall(omap_init_wdt);
	333	#endif