Commit | Line | Data |
---|---|---|
0fbc5592 SR |
1 | /* |
2 | * TI DA850/OMAP-L138 EVM board | |
3 | * | |
4 | * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ | |
5 | * | |
6 | * Derived from: arch/arm/mach-davinci/board-da830-evm.c | |
7 | * Original Copyrights follow: | |
8 | * | |
9 | * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under | |
10 | * the terms of the GNU General Public License version 2. This program | |
11 | * is licensed "as is" without any warranty of any kind, whether express | |
12 | * or implied. | |
13 | */ | |
0fbc5592 | 14 | #include <linux/console.h> |
6809084a MP |
15 | #include <linux/delay.h> |
16 | #include <linux/gpio.h> | |
17 | #include <linux/gpio_keys.h> | |
18 | #include <linux/init.h> | |
19 | #include <linux/kernel.h> | |
0fbc5592 SR |
20 | #include <linux/i2c.h> |
21 | #include <linux/i2c/at24.h> | |
75e2ea64 | 22 | #include <linux/i2c/pca953x.h> |
75929f5e | 23 | #include <linux/input.h> |
6809084a | 24 | #include <linux/input/tps6507x-ts.h> |
0bc20bba | 25 | #include <linux/mfd/tps6507x.h> |
38beb929 SR |
26 | #include <linux/mtd/mtd.h> |
27 | #include <linux/mtd/nand.h> | |
28 | #include <linux/mtd/partitions.h> | |
7c5ec609 | 29 | #include <linux/mtd/physmap.h> |
6809084a MP |
30 | #include <linux/platform_device.h> |
31 | #include <linux/platform_data/mtd-davinci.h> | |
32 | #include <linux/platform_data/mtd-davinci-aemif.h> | |
33 | #include <linux/platform_data/spi-davinci.h> | |
ae41d17a | 34 | #include <linux/platform_data/uio_pruss.h> |
a9eb1f67 | 35 | #include <linux/regulator/machine.h> |
8b24599e | 36 | #include <linux/regulator/tps6507x.h> |
fdce5568 SN |
37 | #include <linux/spi/spi.h> |
38 | #include <linux/spi/flash.h> | |
ab3f5c1f | 39 | #include <linux/wl12xx.h> |
0fbc5592 | 40 | |
0fbc5592 SR |
41 | #include <mach/cp_intc.h> |
42 | #include <mach/da8xx.h> | |
7761ef67 | 43 | #include <mach/mux.h> |
6a2461a4 | 44 | #include <mach/sram.h> |
6809084a MP |
45 | |
46 | #include <asm/mach-types.h> | |
47 | #include <asm/mach/arch.h> | |
48 | #include <asm/system_info.h> | |
0fbc5592 | 49 | |
1e046d17 | 50 | #include <media/tvp514x.h> |
2bd4e58c | 51 | #include <media/adv7343.h> |
1e046d17 | 52 | |
f6f97588 | 53 | #define DA850_EVM_PHY_ID "davinci_mdio-0:00" |
7761ef67 | 54 | #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) |
5cbdf276 | 55 | #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) |
5cbdf276 | 56 | |
700691f2 SR |
57 | #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) |
58 | #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) | |
59 | ||
ab3f5c1f IY |
60 | #define DA850_WLAN_EN GPIO_TO_PIN(6, 9) |
61 | #define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10) | |
62 | ||
2206771c C |
63 | #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) |
64 | ||
fdce5568 SN |
65 | static struct mtd_partition da850evm_spiflash_part[] = { |
66 | [0] = { | |
67 | .name = "UBL", | |
68 | .offset = 0, | |
69 | .size = SZ_64K, | |
70 | .mask_flags = MTD_WRITEABLE, | |
71 | }, | |
72 | [1] = { | |
73 | .name = "U-Boot", | |
74 | .offset = MTDPART_OFS_APPEND, | |
75 | .size = SZ_512K, | |
76 | .mask_flags = MTD_WRITEABLE, | |
77 | }, | |
78 | [2] = { | |
79 | .name = "U-Boot-Env", | |
80 | .offset = MTDPART_OFS_APPEND, | |
81 | .size = SZ_64K, | |
82 | .mask_flags = MTD_WRITEABLE, | |
83 | }, | |
84 | [3] = { | |
85 | .name = "Kernel", | |
86 | .offset = MTDPART_OFS_APPEND, | |
87 | .size = SZ_2M + SZ_512K, | |
88 | .mask_flags = 0, | |
89 | }, | |
90 | [4] = { | |
91 | .name = "Filesystem", | |
92 | .offset = MTDPART_OFS_APPEND, | |
93 | .size = SZ_4M, | |
94 | .mask_flags = 0, | |
95 | }, | |
96 | [5] = { | |
97 | .name = "MAC-Address", | |
98 | .offset = SZ_8M - SZ_64K, | |
99 | .size = SZ_64K, | |
100 | .mask_flags = MTD_WRITEABLE, | |
101 | }, | |
102 | }; | |
103 | ||
104 | static struct flash_platform_data da850evm_spiflash_data = { | |
105 | .name = "m25p80", | |
106 | .parts = da850evm_spiflash_part, | |
107 | .nr_parts = ARRAY_SIZE(da850evm_spiflash_part), | |
108 | .type = "m25p64", | |
109 | }; | |
110 | ||
111 | static struct davinci_spi_config da850evm_spiflash_cfg = { | |
112 | .io_type = SPI_IO_TYPE_DMA, | |
113 | .c2tdelay = 8, | |
114 | .t2cdelay = 8, | |
115 | }; | |
116 | ||
117 | static struct spi_board_info da850evm_spi_info[] = { | |
118 | { | |
119 | .modalias = "m25p80", | |
120 | .platform_data = &da850evm_spiflash_data, | |
121 | .controller_data = &da850evm_spiflash_cfg, | |
122 | .mode = SPI_MODE_0, | |
123 | .max_speed_hz = 30000000, | |
124 | .bus_num = 1, | |
125 | .chip_select = 0, | |
126 | }, | |
127 | }; | |
128 | ||
810198bc RS |
129 | #ifdef CONFIG_MTD |
130 | static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) | |
131 | { | |
132 | char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; | |
133 | size_t retlen; | |
134 | ||
135 | if (!strcmp(mtd->name, "MAC-Address")) { | |
329ad399 | 136 | mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr); |
810198bc RS |
137 | if (retlen == ETH_ALEN) |
138 | pr_info("Read MAC addr from SPI Flash: %pM\n", | |
139 | mac_addr); | |
140 | } | |
141 | } | |
142 | ||
143 | static struct mtd_notifier da850evm_spi_notifier = { | |
144 | .add = da850_evm_m25p80_notify_add, | |
145 | }; | |
146 | ||
147 | static void da850_evm_setup_mac_addr(void) | |
148 | { | |
149 | register_mtd_user(&da850evm_spi_notifier); | |
150 | } | |
151 | #else | |
152 | static void da850_evm_setup_mac_addr(void) { } | |
153 | #endif | |
154 | ||
7c5ec609 SR |
155 | static struct mtd_partition da850_evm_norflash_partition[] = { |
156 | { | |
e2abd5a2 | 157 | .name = "bootloaders + env", |
7c5ec609 | 158 | .offset = 0, |
e2abd5a2 SR |
159 | .size = SZ_512K, |
160 | .mask_flags = MTD_WRITEABLE, | |
161 | }, | |
162 | { | |
163 | .name = "kernel", | |
164 | .offset = MTDPART_OFS_APPEND, | |
165 | .size = SZ_2M, | |
166 | .mask_flags = 0, | |
167 | }, | |
168 | { | |
169 | .name = "filesystem", | |
170 | .offset = MTDPART_OFS_APPEND, | |
7c5ec609 SR |
171 | .size = MTDPART_SIZ_FULL, |
172 | .mask_flags = 0, | |
173 | }, | |
174 | }; | |
175 | ||
176 | static struct physmap_flash_data da850_evm_norflash_data = { | |
177 | .width = 2, | |
178 | .parts = da850_evm_norflash_partition, | |
179 | .nr_parts = ARRAY_SIZE(da850_evm_norflash_partition), | |
180 | }; | |
181 | ||
182 | static struct resource da850_evm_norflash_resource[] = { | |
183 | { | |
184 | .start = DA8XX_AEMIF_CS2_BASE, | |
185 | .end = DA8XX_AEMIF_CS2_BASE + SZ_32M - 1, | |
186 | .flags = IORESOURCE_MEM, | |
187 | }, | |
188 | }; | |
189 | ||
190 | static struct platform_device da850_evm_norflash_device = { | |
191 | .name = "physmap-flash", | |
192 | .id = 0, | |
193 | .dev = { | |
194 | .platform_data = &da850_evm_norflash_data, | |
195 | }, | |
196 | .num_resources = 1, | |
197 | .resource = da850_evm_norflash_resource, | |
198 | }; | |
199 | ||
63534443 SN |
200 | static struct davinci_pm_config da850_pm_pdata = { |
201 | .sleepcount = 128, | |
202 | }; | |
203 | ||
204 | static struct platform_device da850_pm_device = { | |
205 | .name = "pm-davinci", | |
206 | .dev = { | |
207 | .platform_data = &da850_pm_pdata, | |
208 | }, | |
209 | .id = -1, | |
210 | }; | |
211 | ||
38beb929 SR |
212 | /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash |
213 | * (128K blocks). It may be used instead of the (default) SPI flash | |
214 | * to boot, using TI's tools to install the secondary boot loader | |
215 | * (UBL) and U-Boot. | |
216 | */ | |
db549d22 | 217 | static struct mtd_partition da850_evm_nandflash_partition[] = { |
38beb929 SR |
218 | { |
219 | .name = "u-boot env", | |
220 | .offset = 0, | |
221 | .size = SZ_128K, | |
222 | .mask_flags = MTD_WRITEABLE, | |
223 | }, | |
224 | { | |
225 | .name = "UBL", | |
226 | .offset = MTDPART_OFS_APPEND, | |
227 | .size = SZ_128K, | |
228 | .mask_flags = MTD_WRITEABLE, | |
229 | }, | |
230 | { | |
231 | .name = "u-boot", | |
232 | .offset = MTDPART_OFS_APPEND, | |
233 | .size = 4 * SZ_128K, | |
234 | .mask_flags = MTD_WRITEABLE, | |
235 | }, | |
236 | { | |
237 | .name = "kernel", | |
238 | .offset = 0x200000, | |
239 | .size = SZ_2M, | |
240 | .mask_flags = 0, | |
241 | }, | |
242 | { | |
243 | .name = "filesystem", | |
244 | .offset = MTDPART_OFS_APPEND, | |
245 | .size = MTDPART_SIZ_FULL, | |
246 | .mask_flags = 0, | |
247 | }, | |
248 | }; | |
249 | ||
18a8505c SN |
250 | static struct davinci_aemif_timing da850_evm_nandflash_timing = { |
251 | .wsetup = 24, | |
252 | .wstrobe = 21, | |
253 | .whold = 14, | |
254 | .rsetup = 19, | |
255 | .rstrobe = 50, | |
256 | .rhold = 0, | |
257 | .ta = 20, | |
258 | }; | |
259 | ||
38beb929 SR |
260 | static struct davinci_nand_pdata da850_evm_nandflash_data = { |
261 | .parts = da850_evm_nandflash_partition, | |
262 | .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition), | |
263 | .ecc_mode = NAND_ECC_HW, | |
fc42e335 | 264 | .ecc_bits = 4, |
bb9ebd4e | 265 | .bbt_options = NAND_BBT_USE_FLASH, |
18a8505c | 266 | .timing = &da850_evm_nandflash_timing, |
38beb929 SR |
267 | }; |
268 | ||
269 | static struct resource da850_evm_nandflash_resource[] = { | |
270 | { | |
271 | .start = DA8XX_AEMIF_CS3_BASE, | |
272 | .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1, | |
273 | .flags = IORESOURCE_MEM, | |
274 | }, | |
275 | { | |
276 | .start = DA8XX_AEMIF_CTL_BASE, | |
277 | .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, | |
278 | .flags = IORESOURCE_MEM, | |
279 | }, | |
280 | }; | |
281 | ||
282 | static struct platform_device da850_evm_nandflash_device = { | |
283 | .name = "davinci_nand", | |
284 | .id = 1, | |
285 | .dev = { | |
286 | .platform_data = &da850_evm_nandflash_data, | |
287 | }, | |
288 | .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), | |
289 | .resource = da850_evm_nandflash_resource, | |
290 | }; | |
291 | ||
59858b71 | 292 | static struct platform_device *da850_evm_devices[] = { |
039c5ee3 SR |
293 | &da850_evm_nandflash_device, |
294 | &da850_evm_norflash_device, | |
295 | }; | |
296 | ||
297 | #define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 | |
298 | #define DA8XX_AEMIF_ASIZE_16BIT 0x1 | |
299 | ||
300 | static void __init da850_evm_init_nor(void) | |
301 | { | |
302 | void __iomem *aemif_addr; | |
303 | ||
304 | aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); | |
305 | ||
306 | /* Configure data bus width of CS2 to 16 bit */ | |
307 | writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | | |
308 | DA8XX_AEMIF_ASIZE_16BIT, | |
309 | aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); | |
310 | ||
311 | iounmap(aemif_addr); | |
312 | } | |
313 | ||
f48ecc2f SS |
314 | static const short da850_evm_nand_pins[] = { |
315 | DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, | |
316 | DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, | |
317 | DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4, | |
318 | DA850_NEMA_WE, DA850_NEMA_OE, | |
319 | -1 | |
320 | }; | |
321 | ||
322 | static const short da850_evm_nor_pins[] = { | |
323 | DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2, | |
324 | DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1, | |
325 | DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5, | |
326 | DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9, | |
327 | DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13, | |
328 | DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1, | |
329 | DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5, | |
330 | DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9, | |
331 | DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13, | |
332 | DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17, | |
333 | DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21, | |
334 | DA850_EMA_A_22, DA850_EMA_A_23, | |
335 | -1 | |
336 | }; | |
337 | ||
a0a56db9 | 338 | #define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) |
039c5ee3 | 339 | |
f48ecc2f | 340 | static inline void da850_evm_setup_nor_nand(void) |
039c5ee3 SR |
341 | { |
342 | int ret = 0; | |
343 | ||
b688c2fb | 344 | if (!HAS_MMC) { |
f48ecc2f | 345 | ret = davinci_cfg_reg_list(da850_evm_nand_pins); |
039c5ee3 | 346 | if (ret) |
6c7c23cc RT |
347 | pr_warn("%s: NAND mux setup failed: %d\n", |
348 | __func__, ret); | |
039c5ee3 | 349 | |
f48ecc2f | 350 | ret = davinci_cfg_reg_list(da850_evm_nor_pins); |
039c5ee3 | 351 | if (ret) |
6c7c23cc RT |
352 | pr_warn("%s: NOR mux setup failed: %d\n", |
353 | __func__, ret); | |
039c5ee3 SR |
354 | |
355 | da850_evm_init_nor(); | |
356 | ||
357 | platform_add_devices(da850_evm_devices, | |
358 | ARRAY_SIZE(da850_evm_devices)); | |
359 | } | |
360 | } | |
75e2ea64 | 361 | |
bae10587 SN |
362 | #ifdef CONFIG_DA850_UI_RMII |
363 | static inline void da850_evm_setup_emac_rmii(int rmii_sel) | |
364 | { | |
365 | struct davinci_soc_info *soc_info = &davinci_soc_info; | |
366 | ||
367 | soc_info->emac_pdata->rmii_en = 1; | |
47e7cb14 | 368 | gpio_set_value_cansleep(rmii_sel, 0); |
bae10587 SN |
369 | } |
370 | #else | |
371 | static inline void da850_evm_setup_emac_rmii(int rmii_sel) { } | |
372 | #endif | |
373 | ||
75929f5e BG |
374 | |
375 | #define DA850_KEYS_DEBOUNCE_MS 10 | |
376 | /* | |
377 | * At 200ms polling interval it is possible to miss an | |
378 | * event by tapping very lightly on the push button but most | |
379 | * pushes do result in an event; longer intervals require the | |
380 | * user to hold the button whereas shorter intervals require | |
381 | * more CPU time for polling. | |
382 | */ | |
383 | #define DA850_GPIO_KEYS_POLL_MS 200 | |
384 | ||
385 | enum da850_evm_ui_exp_pins { | |
386 | DA850_EVM_UI_EXP_SEL_C = 5, | |
387 | DA850_EVM_UI_EXP_SEL_B, | |
388 | DA850_EVM_UI_EXP_SEL_A, | |
389 | DA850_EVM_UI_EXP_PB8, | |
390 | DA850_EVM_UI_EXP_PB7, | |
391 | DA850_EVM_UI_EXP_PB6, | |
392 | DA850_EVM_UI_EXP_PB5, | |
393 | DA850_EVM_UI_EXP_PB4, | |
394 | DA850_EVM_UI_EXP_PB3, | |
395 | DA850_EVM_UI_EXP_PB2, | |
396 | DA850_EVM_UI_EXP_PB1, | |
397 | }; | |
398 | ||
58b6c5a1 | 399 | static const char * const da850_evm_ui_exp[] = { |
75929f5e BG |
400 | [DA850_EVM_UI_EXP_SEL_C] = "sel_c", |
401 | [DA850_EVM_UI_EXP_SEL_B] = "sel_b", | |
402 | [DA850_EVM_UI_EXP_SEL_A] = "sel_a", | |
403 | [DA850_EVM_UI_EXP_PB8] = "pb8", | |
404 | [DA850_EVM_UI_EXP_PB7] = "pb7", | |
405 | [DA850_EVM_UI_EXP_PB6] = "pb6", | |
406 | [DA850_EVM_UI_EXP_PB5] = "pb5", | |
407 | [DA850_EVM_UI_EXP_PB4] = "pb4", | |
408 | [DA850_EVM_UI_EXP_PB3] = "pb3", | |
409 | [DA850_EVM_UI_EXP_PB2] = "pb2", | |
410 | [DA850_EVM_UI_EXP_PB1] = "pb1", | |
411 | }; | |
412 | ||
413 | #define DA850_N_UI_PB 8 | |
414 | ||
415 | static struct gpio_keys_button da850_evm_ui_keys[] = { | |
416 | [0 ... DA850_N_UI_PB - 1] = { | |
417 | .type = EV_KEY, | |
418 | .active_low = 1, | |
419 | .wakeup = 0, | |
420 | .debounce_interval = DA850_KEYS_DEBOUNCE_MS, | |
421 | .code = -1, /* assigned at runtime */ | |
422 | .gpio = -1, /* assigned at runtime */ | |
423 | .desc = NULL, /* assigned at runtime */ | |
424 | }, | |
425 | }; | |
426 | ||
427 | static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = { | |
428 | .buttons = da850_evm_ui_keys, | |
429 | .nbuttons = ARRAY_SIZE(da850_evm_ui_keys), | |
430 | .poll_interval = DA850_GPIO_KEYS_POLL_MS, | |
431 | }; | |
432 | ||
433 | static struct platform_device da850_evm_ui_keys_device = { | |
434 | .name = "gpio-keys-polled", | |
435 | .id = 0, | |
436 | .dev = { | |
437 | .platform_data = &da850_evm_ui_keys_pdata | |
438 | }, | |
439 | }; | |
440 | ||
441 | static void da850_evm_ui_keys_init(unsigned gpio) | |
442 | { | |
443 | int i; | |
444 | struct gpio_keys_button *button; | |
445 | ||
446 | for (i = 0; i < DA850_N_UI_PB; i++) { | |
447 | button = &da850_evm_ui_keys[i]; | |
448 | button->code = KEY_F8 - i; | |
449 | button->desc = (char *) | |
450 | da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i]; | |
451 | button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i; | |
452 | } | |
453 | } | |
454 | ||
1e046d17 MH |
455 | #ifdef CONFIG_DA850_UI_SD_VIDEO_PORT |
456 | static inline void da850_evm_setup_video_port(int video_sel) | |
457 | { | |
458 | gpio_set_value_cansleep(video_sel, 0); | |
459 | } | |
460 | #else | |
461 | static inline void da850_evm_setup_video_port(int video_sel) { } | |
462 | #endif | |
463 | ||
75e2ea64 C |
464 | static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, |
465 | unsigned ngpio, void *c) | |
466 | { | |
467 | int sel_a, sel_b, sel_c, ret; | |
468 | ||
53c2897d BG |
469 | sel_a = gpio + DA850_EVM_UI_EXP_SEL_A; |
470 | sel_b = gpio + DA850_EVM_UI_EXP_SEL_B; | |
471 | sel_c = gpio + DA850_EVM_UI_EXP_SEL_C; | |
75e2ea64 | 472 | |
53c2897d | 473 | ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]); |
75e2ea64 | 474 | if (ret) { |
6c7c23cc | 475 | pr_warn("Cannot open UI expander pin %d\n", sel_a); |
75e2ea64 C |
476 | goto exp_setup_sela_fail; |
477 | } | |
478 | ||
53c2897d | 479 | ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]); |
75e2ea64 | 480 | if (ret) { |
6c7c23cc | 481 | pr_warn("Cannot open UI expander pin %d\n", sel_b); |
75e2ea64 C |
482 | goto exp_setup_selb_fail; |
483 | } | |
484 | ||
53c2897d | 485 | ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]); |
75e2ea64 | 486 | if (ret) { |
6c7c23cc | 487 | pr_warn("Cannot open UI expander pin %d\n", sel_c); |
75e2ea64 C |
488 | goto exp_setup_selc_fail; |
489 | } | |
490 | ||
491 | /* deselect all functionalities */ | |
492 | gpio_direction_output(sel_a, 1); | |
493 | gpio_direction_output(sel_b, 1); | |
494 | gpio_direction_output(sel_c, 1); | |
495 | ||
75929f5e BG |
496 | da850_evm_ui_keys_init(gpio); |
497 | ret = platform_device_register(&da850_evm_ui_keys_device); | |
498 | if (ret) { | |
6c7c23cc | 499 | pr_warn("Could not register UI GPIO expander push-buttons"); |
75929f5e BG |
500 | goto exp_setup_keys_fail; |
501 | } | |
502 | ||
75e2ea64 C |
503 | pr_info("DA850/OMAP-L138 EVM UI card detected\n"); |
504 | ||
505 | da850_evm_setup_nor_nand(); | |
506 | ||
bae10587 | 507 | da850_evm_setup_emac_rmii(sel_a); |
2206771c | 508 | |
1e046d17 MH |
509 | da850_evm_setup_video_port(sel_c); |
510 | ||
75e2ea64 C |
511 | return 0; |
512 | ||
75929f5e BG |
513 | exp_setup_keys_fail: |
514 | gpio_free(sel_c); | |
75e2ea64 C |
515 | exp_setup_selc_fail: |
516 | gpio_free(sel_b); | |
517 | exp_setup_selb_fail: | |
518 | gpio_free(sel_a); | |
519 | exp_setup_sela_fail: | |
520 | return ret; | |
521 | } | |
522 | ||
523 | static int da850_evm_ui_expander_teardown(struct i2c_client *client, | |
524 | unsigned gpio, unsigned ngpio, void *c) | |
525 | { | |
75929f5e BG |
526 | platform_device_unregister(&da850_evm_ui_keys_device); |
527 | ||
75e2ea64 | 528 | /* deselect all functionalities */ |
53c2897d BG |
529 | gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1); |
530 | gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1); | |
531 | gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1); | |
75e2ea64 | 532 | |
53c2897d BG |
533 | gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C); |
534 | gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B); | |
535 | gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A); | |
75e2ea64 C |
536 | |
537 | return 0; | |
538 | } | |
539 | ||
70b30939 BG |
540 | /* assign the baseboard expander's GPIOs after the UI board's */ |
541 | #define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp) | |
542 | #define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS) | |
543 | ||
544 | enum da850_evm_bb_exp_pins { | |
545 | DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0, | |
546 | DA850_EVM_BB_EXP_SW_RST, | |
547 | DA850_EVM_BB_EXP_TP_23, | |
548 | DA850_EVM_BB_EXP_TP_22, | |
549 | DA850_EVM_BB_EXP_TP_21, | |
550 | DA850_EVM_BB_EXP_USER_PB1, | |
551 | DA850_EVM_BB_EXP_USER_LED2, | |
552 | DA850_EVM_BB_EXP_USER_LED1, | |
553 | DA850_EVM_BB_EXP_USER_SW1, | |
554 | DA850_EVM_BB_EXP_USER_SW2, | |
555 | DA850_EVM_BB_EXP_USER_SW3, | |
556 | DA850_EVM_BB_EXP_USER_SW4, | |
557 | DA850_EVM_BB_EXP_USER_SW5, | |
558 | DA850_EVM_BB_EXP_USER_SW6, | |
559 | DA850_EVM_BB_EXP_USER_SW7, | |
560 | DA850_EVM_BB_EXP_USER_SW8 | |
561 | }; | |
562 | ||
58b6c5a1 | 563 | static const char * const da850_evm_bb_exp[] = { |
70b30939 BG |
564 | [DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en", |
565 | [DA850_EVM_BB_EXP_SW_RST] = "sw_rst", | |
566 | [DA850_EVM_BB_EXP_TP_23] = "tp_23", | |
567 | [DA850_EVM_BB_EXP_TP_22] = "tp_22", | |
568 | [DA850_EVM_BB_EXP_TP_21] = "tp_21", | |
569 | [DA850_EVM_BB_EXP_USER_PB1] = "user_pb1", | |
570 | [DA850_EVM_BB_EXP_USER_LED2] = "user_led2", | |
571 | [DA850_EVM_BB_EXP_USER_LED1] = "user_led1", | |
572 | [DA850_EVM_BB_EXP_USER_SW1] = "user_sw1", | |
573 | [DA850_EVM_BB_EXP_USER_SW2] = "user_sw2", | |
574 | [DA850_EVM_BB_EXP_USER_SW3] = "user_sw3", | |
575 | [DA850_EVM_BB_EXP_USER_SW4] = "user_sw4", | |
576 | [DA850_EVM_BB_EXP_USER_SW5] = "user_sw5", | |
577 | [DA850_EVM_BB_EXP_USER_SW6] = "user_sw6", | |
578 | [DA850_EVM_BB_EXP_USER_SW7] = "user_sw7", | |
579 | [DA850_EVM_BB_EXP_USER_SW8] = "user_sw8", | |
580 | }; | |
581 | ||
582 | #define DA850_N_BB_USER_SW 8 | |
583 | ||
584 | static struct gpio_keys_button da850_evm_bb_keys[] = { | |
585 | [0] = { | |
586 | .type = EV_KEY, | |
587 | .active_low = 1, | |
588 | .wakeup = 0, | |
589 | .debounce_interval = DA850_KEYS_DEBOUNCE_MS, | |
590 | .code = KEY_PROG1, | |
591 | .desc = NULL, /* assigned at runtime */ | |
592 | .gpio = -1, /* assigned at runtime */ | |
593 | }, | |
594 | [1 ... DA850_N_BB_USER_SW] = { | |
595 | .type = EV_SW, | |
596 | .active_low = 1, | |
597 | .wakeup = 0, | |
598 | .debounce_interval = DA850_KEYS_DEBOUNCE_MS, | |
599 | .code = -1, /* assigned at runtime */ | |
600 | .desc = NULL, /* assigned at runtime */ | |
601 | .gpio = -1, /* assigned at runtime */ | |
602 | }, | |
603 | }; | |
604 | ||
605 | static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = { | |
606 | .buttons = da850_evm_bb_keys, | |
607 | .nbuttons = ARRAY_SIZE(da850_evm_bb_keys), | |
608 | .poll_interval = DA850_GPIO_KEYS_POLL_MS, | |
609 | }; | |
610 | ||
611 | static struct platform_device da850_evm_bb_keys_device = { | |
612 | .name = "gpio-keys-polled", | |
613 | .id = 1, | |
614 | .dev = { | |
615 | .platform_data = &da850_evm_bb_keys_pdata | |
616 | }, | |
617 | }; | |
618 | ||
619 | static void da850_evm_bb_keys_init(unsigned gpio) | |
620 | { | |
621 | int i; | |
622 | struct gpio_keys_button *button; | |
623 | ||
624 | button = &da850_evm_bb_keys[0]; | |
625 | button->desc = (char *) | |
626 | da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1]; | |
627 | button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1; | |
628 | ||
629 | for (i = 0; i < DA850_N_BB_USER_SW; i++) { | |
630 | button = &da850_evm_bb_keys[i + 1]; | |
631 | button->code = SW_LID + i; | |
632 | button->desc = (char *) | |
633 | da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i]; | |
634 | button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i; | |
635 | } | |
636 | } | |
637 | ||
638 | #define DA850_N_BB_USER_LED 2 | |
639 | ||
640 | static struct gpio_led da850_evm_bb_leds[] = { | |
641 | [0 ... DA850_N_BB_USER_LED - 1] = { | |
642 | .active_low = 1, | |
643 | .gpio = -1, /* assigned at runtime */ | |
644 | .name = NULL, /* assigned at runtime */ | |
645 | }, | |
646 | }; | |
647 | ||
648 | static struct gpio_led_platform_data da850_evm_bb_leds_pdata = { | |
649 | .leds = da850_evm_bb_leds, | |
650 | .num_leds = ARRAY_SIZE(da850_evm_bb_leds), | |
651 | }; | |
652 | ||
653 | static struct platform_device da850_evm_bb_leds_device = { | |
654 | .name = "leds-gpio", | |
655 | .id = -1, | |
656 | .dev = { | |
657 | .platform_data = &da850_evm_bb_leds_pdata | |
658 | } | |
659 | }; | |
660 | ||
661 | static void da850_evm_bb_leds_init(unsigned gpio) | |
662 | { | |
663 | int i; | |
664 | struct gpio_led *led; | |
665 | ||
666 | for (i = 0; i < DA850_N_BB_USER_LED; i++) { | |
667 | led = &da850_evm_bb_leds[i]; | |
668 | ||
669 | led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i; | |
670 | led->name = | |
671 | da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i]; | |
672 | } | |
673 | } | |
674 | ||
675 | static int da850_evm_bb_expander_setup(struct i2c_client *client, | |
676 | unsigned gpio, unsigned ngpio, | |
677 | void *c) | |
678 | { | |
679 | int ret; | |
680 | ||
681 | /* | |
682 | * Register the switches and pushbutton on the baseboard as a gpio-keys | |
683 | * device. | |
684 | */ | |
685 | da850_evm_bb_keys_init(gpio); | |
686 | ret = platform_device_register(&da850_evm_bb_keys_device); | |
687 | if (ret) { | |
6c7c23cc | 688 | pr_warn("Could not register baseboard GPIO expander keys"); |
70b30939 BG |
689 | goto io_exp_setup_sw_fail; |
690 | } | |
691 | ||
692 | da850_evm_bb_leds_init(gpio); | |
693 | ret = platform_device_register(&da850_evm_bb_leds_device); | |
694 | if (ret) { | |
6c7c23cc | 695 | pr_warn("Could not register baseboard GPIO expander LEDs"); |
70b30939 BG |
696 | goto io_exp_setup_leds_fail; |
697 | } | |
698 | ||
699 | return 0; | |
700 | ||
701 | io_exp_setup_leds_fail: | |
702 | platform_device_unregister(&da850_evm_bb_keys_device); | |
703 | io_exp_setup_sw_fail: | |
704 | return ret; | |
705 | } | |
706 | ||
707 | static int da850_evm_bb_expander_teardown(struct i2c_client *client, | |
708 | unsigned gpio, unsigned ngpio, void *c) | |
709 | { | |
710 | platform_device_unregister(&da850_evm_bb_leds_device); | |
711 | platform_device_unregister(&da850_evm_bb_keys_device); | |
712 | ||
713 | return 0; | |
714 | } | |
715 | ||
75e2ea64 C |
716 | static struct pca953x_platform_data da850_evm_ui_expander_info = { |
717 | .gpio_base = DAVINCI_N_GPIO, | |
718 | .setup = da850_evm_ui_expander_setup, | |
719 | .teardown = da850_evm_ui_expander_teardown, | |
75929f5e | 720 | .names = da850_evm_ui_exp, |
75e2ea64 C |
721 | }; |
722 | ||
70b30939 BG |
723 | static struct pca953x_platform_data da850_evm_bb_expander_info = { |
724 | .gpio_base = DA850_BB_EXPANDER_GPIO_BASE, | |
725 | .setup = da850_evm_bb_expander_setup, | |
726 | .teardown = da850_evm_bb_expander_teardown, | |
727 | .names = da850_evm_bb_exp, | |
728 | }; | |
729 | ||
1a7ff8ff C |
730 | static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { |
731 | { | |
732 | I2C_BOARD_INFO("tlv320aic3x", 0x18), | |
75e2ea64 C |
733 | }, |
734 | { | |
735 | I2C_BOARD_INFO("tca6416", 0x20), | |
736 | .platform_data = &da850_evm_ui_expander_info, | |
737 | }, | |
70b30939 BG |
738 | { |
739 | I2C_BOARD_INFO("tca6416", 0x21), | |
740 | .platform_data = &da850_evm_bb_expander_info, | |
741 | }, | |
1a7ff8ff C |
742 | }; |
743 | ||
0fbc5592 SR |
744 | static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { |
745 | .bus_freq = 100, /* kHz */ | |
746 | .bus_delay = 0, /* usec */ | |
747 | }; | |
748 | ||
749 | static struct davinci_uart_config da850_evm_uart_config __initdata = { | |
750 | .enabled_uarts = 0x7, | |
751 | }; | |
752 | ||
491214e1 C |
753 | /* davinci da850 evm audio machine driver */ |
754 | static u8 da850_iis_serializer_direction[] = { | |
755 | INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, | |
756 | INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, | |
757 | INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE, | |
758 | RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, | |
759 | }; | |
760 | ||
761 | static struct snd_platform_data da850_evm_snd_data = { | |
88abfd5b MP |
762 | .tx_dma_offset = 0x2000, |
763 | .rx_dma_offset = 0x2000, | |
764 | .op_mode = DAVINCI_MCASP_IIS_MODE, | |
765 | .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), | |
766 | .tdm_slots = 2, | |
767 | .serial_dir = da850_iis_serializer_direction, | |
768 | .asp_chan_q = EVENTQ_0, | |
769 | .ram_chan_q = EVENTQ_1, | |
770 | .version = MCASP_VERSION_2, | |
771 | .txnumevt = 1, | |
772 | .rxnumevt = 1, | |
773 | .sram_size_playback = SZ_8K, | |
774 | .sram_size_capture = SZ_8K, | |
491214e1 C |
775 | }; |
776 | ||
c840fc74 MW |
777 | static const short da850_evm_mcasp_pins[] __initconst = { |
778 | DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, | |
779 | DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, | |
780 | DA850_AXR_11, DA850_AXR_12, | |
781 | -1 | |
782 | }; | |
783 | ||
700691f2 SR |
784 | static int da850_evm_mmc_get_ro(int index) |
785 | { | |
786 | return gpio_get_value(DA850_MMCSD_WP_PIN); | |
787 | } | |
788 | ||
789 | static int da850_evm_mmc_get_cd(int index) | |
790 | { | |
791 | return !gpio_get_value(DA850_MMCSD_CD_PIN); | |
792 | } | |
793 | ||
794 | static struct davinci_mmc_config da850_mmc_config = { | |
795 | .get_ro = da850_evm_mmc_get_ro, | |
796 | .get_cd = da850_evm_mmc_get_cd, | |
797 | .wires = 4, | |
0046d0bf C |
798 | .max_freq = 50000000, |
799 | .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, | |
700691f2 SR |
800 | }; |
801 | ||
5a0d80ea MW |
802 | static const short da850_evm_mmcsd0_pins[] __initconst = { |
803 | DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, | |
804 | DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, | |
805 | DA850_GPIO4_0, DA850_GPIO4_1, | |
806 | -1 | |
807 | }; | |
808 | ||
d52f235f C |
809 | static void da850_panel_power_ctrl(int val) |
810 | { | |
811 | /* lcd backlight */ | |
812 | gpio_set_value(DA850_LCD_BL_PIN, val); | |
813 | ||
814 | /* lcd power */ | |
815 | gpio_set_value(DA850_LCD_PWR_PIN, val); | |
816 | } | |
817 | ||
5cbdf276 SR |
818 | static int da850_lcd_hw_init(void) |
819 | { | |
820 | int status; | |
821 | ||
822 | status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n"); | |
823 | if (status < 0) | |
824 | return status; | |
825 | ||
826 | status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n"); | |
827 | if (status < 0) { | |
828 | gpio_free(DA850_LCD_BL_PIN); | |
829 | return status; | |
830 | } | |
831 | ||
832 | gpio_direction_output(DA850_LCD_BL_PIN, 0); | |
833 | gpio_direction_output(DA850_LCD_PWR_PIN, 0); | |
834 | ||
d52f235f C |
835 | /* Switch off panel power and backlight */ |
836 | da850_panel_power_ctrl(0); | |
5cbdf276 | 837 | |
d52f235f C |
838 | /* Switch on panel power and backlight */ |
839 | da850_panel_power_ctrl(1); | |
5cbdf276 SR |
840 | |
841 | return 0; | |
842 | } | |
491214e1 | 843 | |
a9eb1f67 SN |
844 | /* TPS65070 voltage regulator support */ |
845 | ||
846 | /* 3.3V */ | |
db549d22 | 847 | static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { |
a9eb1f67 SN |
848 | { |
849 | .supply = "usb0_vdda33", | |
850 | }, | |
851 | { | |
852 | .supply = "usb1_vdda33", | |
853 | }, | |
854 | }; | |
855 | ||
856 | /* 3.3V or 1.8V */ | |
db549d22 | 857 | static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { |
a9eb1f67 SN |
858 | { |
859 | .supply = "dvdd3318_a", | |
860 | }, | |
861 | { | |
862 | .supply = "dvdd3318_b", | |
863 | }, | |
864 | { | |
865 | .supply = "dvdd3318_c", | |
866 | }, | |
867 | }; | |
868 | ||
869 | /* 1.2V */ | |
db549d22 | 870 | static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = { |
a9eb1f67 SN |
871 | { |
872 | .supply = "cvdd", | |
873 | }, | |
874 | }; | |
875 | ||
876 | /* 1.8V LDO */ | |
db549d22 | 877 | static struct regulator_consumer_supply tps65070_ldo1_consumers[] = { |
a9eb1f67 SN |
878 | { |
879 | .supply = "sata_vddr", | |
880 | }, | |
881 | { | |
882 | .supply = "usb0_vdda18", | |
883 | }, | |
884 | { | |
885 | .supply = "usb1_vdda18", | |
886 | }, | |
887 | { | |
888 | .supply = "ddr_dvdd18", | |
889 | }, | |
890 | }; | |
891 | ||
892 | /* 1.2V LDO */ | |
db549d22 | 893 | static struct regulator_consumer_supply tps65070_ldo2_consumers[] = { |
a9eb1f67 SN |
894 | { |
895 | .supply = "sata_vdd", | |
896 | }, | |
897 | { | |
898 | .supply = "pll0_vdda", | |
899 | }, | |
900 | { | |
901 | .supply = "pll1_vdda", | |
902 | }, | |
903 | { | |
904 | .supply = "usbs_cvdd", | |
905 | }, | |
906 | { | |
907 | .supply = "vddarnwa1", | |
908 | }, | |
909 | }; | |
910 | ||
8b24599e SN |
911 | /* We take advantage of the fact that both defdcdc{2,3} are tied high */ |
912 | static struct tps6507x_reg_platform_data tps6507x_platform_data = { | |
913 | .defdcdc_default = true, | |
914 | }; | |
915 | ||
db549d22 | 916 | static struct regulator_init_data tps65070_regulator_data[] = { |
a9eb1f67 SN |
917 | /* dcdc1 */ |
918 | { | |
919 | .constraints = { | |
920 | .min_uV = 3150000, | |
921 | .max_uV = 3450000, | |
922 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | | |
923 | REGULATOR_CHANGE_STATUS), | |
924 | .boot_on = 1, | |
925 | }, | |
926 | .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers), | |
927 | .consumer_supplies = tps65070_dcdc1_consumers, | |
928 | }, | |
929 | ||
930 | /* dcdc2 */ | |
931 | { | |
932 | .constraints = { | |
933 | .min_uV = 1710000, | |
934 | .max_uV = 3450000, | |
935 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | | |
936 | REGULATOR_CHANGE_STATUS), | |
937 | .boot_on = 1, | |
938 | }, | |
939 | .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers), | |
940 | .consumer_supplies = tps65070_dcdc2_consumers, | |
8b24599e | 941 | .driver_data = &tps6507x_platform_data, |
a9eb1f67 SN |
942 | }, |
943 | ||
944 | /* dcdc3 */ | |
945 | { | |
946 | .constraints = { | |
947 | .min_uV = 950000, | |
28bd2c34 | 948 | .max_uV = 1350000, |
a9eb1f67 SN |
949 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | |
950 | REGULATOR_CHANGE_STATUS), | |
951 | .boot_on = 1, | |
952 | }, | |
953 | .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers), | |
954 | .consumer_supplies = tps65070_dcdc3_consumers, | |
8b24599e | 955 | .driver_data = &tps6507x_platform_data, |
a9eb1f67 SN |
956 | }, |
957 | ||
958 | /* ldo1 */ | |
959 | { | |
960 | .constraints = { | |
961 | .min_uV = 1710000, | |
962 | .max_uV = 1890000, | |
963 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | | |
964 | REGULATOR_CHANGE_STATUS), | |
965 | .boot_on = 1, | |
966 | }, | |
967 | .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers), | |
968 | .consumer_supplies = tps65070_ldo1_consumers, | |
969 | }, | |
970 | ||
971 | /* ldo2 */ | |
972 | { | |
973 | .constraints = { | |
974 | .min_uV = 1140000, | |
975 | .max_uV = 1320000, | |
976 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | | |
977 | REGULATOR_CHANGE_STATUS), | |
978 | .boot_on = 1, | |
979 | }, | |
980 | .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers), | |
981 | .consumer_supplies = tps65070_ldo2_consumers, | |
982 | }, | |
983 | }; | |
984 | ||
da1e3680 TF |
985 | static struct touchscreen_init_data tps6507x_touchscreen_data = { |
986 | .poll_period = 30, /* ms between touch samples */ | |
987 | .min_pressure = 0x30, /* minimum pressure to trigger touch */ | |
988 | .vref = 0, /* turn off vref when not using A/D */ | |
989 | .vendor = 0, /* /sys/class/input/input?/id/vendor */ | |
990 | .product = 65070, /* /sys/class/input/input?/id/product */ | |
991 | .version = 0x100, /* /sys/class/input/input?/id/version */ | |
992 | }; | |
993 | ||
0bc20bba TF |
994 | static struct tps6507x_board tps_board = { |
995 | .tps6507x_pmic_init_data = &tps65070_regulator_data[0], | |
da1e3680 | 996 | .tps6507x_ts_init_data = &tps6507x_touchscreen_data, |
0bc20bba TF |
997 | }; |
998 | ||
3506f277 | 999 | static struct i2c_board_info __initdata da850_evm_tps65070_info[] = { |
a9eb1f67 SN |
1000 | { |
1001 | I2C_BOARD_INFO("tps6507x", 0x48), | |
0bc20bba | 1002 | .platform_data = &tps_board, |
a9eb1f67 SN |
1003 | }, |
1004 | }; | |
1005 | ||
1006 | static int __init pmic_tps65070_init(void) | |
1007 | { | |
3506f277 BG |
1008 | return i2c_register_board_info(1, da850_evm_tps65070_info, |
1009 | ARRAY_SIZE(da850_evm_tps65070_info)); | |
a9eb1f67 SN |
1010 | } |
1011 | ||
7761ef67 SR |
1012 | static const short da850_evm_lcdc_pins[] = { |
1013 | DA850_GPIO2_8, DA850_GPIO2_15, | |
1014 | -1 | |
1015 | }; | |
1016 | ||
85b8307f SS |
1017 | static const short da850_evm_mii_pins[] = { |
1018 | DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, | |
1019 | DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, | |
1020 | DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, | |
1021 | DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, | |
1022 | DA850_MDIO_D, | |
1023 | -1 | |
1024 | }; | |
1025 | ||
1026 | static const short da850_evm_rmii_pins[] = { | |
1027 | DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, | |
1028 | DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, | |
1029 | DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, | |
1030 | DA850_MDIO_D, | |
1031 | -1 | |
1032 | }; | |
1033 | ||
bae10587 | 1034 | static int __init da850_evm_config_emac(void) |
2206771c C |
1035 | { |
1036 | void __iomem *cfg_chip3_base; | |
1037 | int ret; | |
1038 | u32 val; | |
bae10587 SN |
1039 | struct davinci_soc_info *soc_info = &davinci_soc_info; |
1040 | u8 rmii_en = soc_info->emac_pdata->rmii_en; | |
1041 | ||
1042 | if (!machine_is_davinci_da850_evm()) | |
1043 | return 0; | |
2206771c | 1044 | |
d2de0582 | 1045 | cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); |
2206771c | 1046 | |
2206771c | 1047 | val = __raw_readl(cfg_chip3_base); |
17fadd9a SN |
1048 | |
1049 | if (rmii_en) { | |
2206771c | 1050 | val |= BIT(8); |
85b8307f | 1051 | ret = davinci_cfg_reg_list(da850_evm_rmii_pins); |
17fadd9a SN |
1052 | pr_info("EMAC: RMII PHY configured, MII PHY will not be" |
1053 | " functional\n"); | |
1054 | } else { | |
2206771c | 1055 | val &= ~BIT(8); |
85b8307f | 1056 | ret = davinci_cfg_reg_list(da850_evm_mii_pins); |
17fadd9a SN |
1057 | pr_info("EMAC: MII PHY configured, RMII PHY will not be" |
1058 | " functional\n"); | |
1059 | } | |
1060 | ||
2206771c | 1061 | if (ret) |
6c7c23cc RT |
1062 | pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n", |
1063 | __func__, ret); | |
2206771c | 1064 | |
17fadd9a SN |
1065 | /* configure the CFGCHIP3 register for RMII or MII */ |
1066 | __raw_writel(val, cfg_chip3_base); | |
1067 | ||
2206771c C |
1068 | ret = davinci_cfg_reg(DA850_GPIO2_6); |
1069 | if (ret) | |
6c7c23cc | 1070 | pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__); |
2206771c C |
1071 | |
1072 | ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en"); | |
1073 | if (ret) { | |
6c7c23cc | 1074 | pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN); |
2206771c C |
1075 | return ret; |
1076 | } | |
1077 | ||
17fadd9a SN |
1078 | /* Enable/Disable MII MDIO clock */ |
1079 | gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en); | |
2206771c | 1080 | |
782f2d78 | 1081 | soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID; |
bae10587 SN |
1082 | |
1083 | ret = da8xx_register_emac(); | |
1084 | if (ret) | |
6c7c23cc | 1085 | pr_warn("%s: EMAC registration failed: %d\n", __func__, ret); |
bae10587 | 1086 | |
2206771c C |
1087 | return 0; |
1088 | } | |
bae10587 | 1089 | device_initcall(da850_evm_config_emac); |
2206771c | 1090 | |
a941c503 RS |
1091 | /* |
1092 | * The following EDMA channels/slots are not being used by drivers (for | |
1093 | * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence | |
1094 | * they are being reserved for codecs on the DSP side. | |
1095 | */ | |
1096 | static const s16 da850_dma0_rsv_chans[][2] = { | |
1097 | /* (offset, number) */ | |
1098 | { 8, 6}, | |
1099 | {24, 4}, | |
1100 | {30, 2}, | |
1101 | {-1, -1} | |
1102 | }; | |
1103 | ||
1104 | static const s16 da850_dma0_rsv_slots[][2] = { | |
1105 | /* (offset, number) */ | |
1106 | { 8, 6}, | |
1107 | {24, 4}, | |
1108 | {30, 50}, | |
1109 | {-1, -1} | |
1110 | }; | |
1111 | ||
1112 | static const s16 da850_dma1_rsv_chans[][2] = { | |
1113 | /* (offset, number) */ | |
1114 | { 0, 28}, | |
1115 | {30, 2}, | |
1116 | {-1, -1} | |
1117 | }; | |
1118 | ||
1119 | static const s16 da850_dma1_rsv_slots[][2] = { | |
1120 | /* (offset, number) */ | |
1121 | { 0, 28}, | |
1122 | {30, 90}, | |
1123 | {-1, -1} | |
1124 | }; | |
1125 | ||
1126 | static struct edma_rsv_info da850_edma_cc0_rsv = { | |
1127 | .rsv_chans = da850_dma0_rsv_chans, | |
1128 | .rsv_slots = da850_dma0_rsv_slots, | |
1129 | }; | |
1130 | ||
1131 | static struct edma_rsv_info da850_edma_cc1_rsv = { | |
1132 | .rsv_chans = da850_dma1_rsv_chans, | |
1133 | .rsv_slots = da850_dma1_rsv_slots, | |
1134 | }; | |
1135 | ||
1136 | static struct edma_rsv_info *da850_edma_rsv[2] = { | |
1137 | &da850_edma_cc0_rsv, | |
1138 | &da850_edma_cc1_rsv, | |
1139 | }; | |
1140 | ||
28bd2c34 SN |
1141 | #ifdef CONFIG_CPU_FREQ |
1142 | static __init int da850_evm_init_cpufreq(void) | |
1143 | { | |
1144 | switch (system_rev & 0xF) { | |
1145 | case 3: | |
1146 | da850_max_speed = 456000; | |
1147 | break; | |
1148 | case 2: | |
1149 | da850_max_speed = 408000; | |
1150 | break; | |
1151 | case 1: | |
1152 | da850_max_speed = 372000; | |
1153 | break; | |
1154 | } | |
1155 | ||
1156 | return da850_register_cpufreq("pll0_sysclk3"); | |
1157 | } | |
1158 | #else | |
1159 | static __init int da850_evm_init_cpufreq(void) { return 0; } | |
1160 | #endif | |
1161 | ||
1e046d17 MH |
1162 | #if defined(CONFIG_DA850_UI_SD_VIDEO_PORT) |
1163 | ||
1164 | #define TVP5147_CH0 "tvp514x-0" | |
1165 | #define TVP5147_CH1 "tvp514x-1" | |
1166 | ||
1167 | /* VPIF capture configuration */ | |
1168 | static struct tvp514x_platform_data tvp5146_pdata = { | |
1169 | .clk_polarity = 0, | |
1170 | .hs_polarity = 1, | |
1171 | .vs_polarity = 1, | |
1172 | }; | |
1173 | ||
1174 | #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) | |
1175 | ||
1176 | static const struct vpif_input da850_ch0_inputs[] = { | |
1177 | { | |
1178 | .input = { | |
1179 | .index = 0, | |
1180 | .name = "Composite", | |
1181 | .type = V4L2_INPUT_TYPE_CAMERA, | |
7aaad131 | 1182 | .capabilities = V4L2_IN_CAP_STD, |
1e046d17 MH |
1183 | .std = TVP514X_STD_ALL, |
1184 | }, | |
7aaad131 HV |
1185 | .input_route = INPUT_CVBS_VI2B, |
1186 | .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, | |
1e046d17 MH |
1187 | .subdev_name = TVP5147_CH0, |
1188 | }, | |
1189 | }; | |
1190 | ||
1191 | static const struct vpif_input da850_ch1_inputs[] = { | |
1192 | { | |
1193 | .input = { | |
1194 | .index = 0, | |
1195 | .name = "S-Video", | |
1196 | .type = V4L2_INPUT_TYPE_CAMERA, | |
7aaad131 | 1197 | .capabilities = V4L2_IN_CAP_STD, |
1e046d17 MH |
1198 | .std = TVP514X_STD_ALL, |
1199 | }, | |
7aaad131 HV |
1200 | .input_route = INPUT_SVIDEO_VI2C_VI1C, |
1201 | .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, | |
1e046d17 MH |
1202 | .subdev_name = TVP5147_CH1, |
1203 | }, | |
1204 | }; | |
1205 | ||
1206 | static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = { | |
1207 | { | |
1208 | .name = TVP5147_CH0, | |
1209 | .board_info = { | |
1210 | I2C_BOARD_INFO("tvp5146", 0x5d), | |
1211 | .platform_data = &tvp5146_pdata, | |
1212 | }, | |
1e046d17 MH |
1213 | }, |
1214 | { | |
1215 | .name = TVP5147_CH1, | |
1216 | .board_info = { | |
1217 | I2C_BOARD_INFO("tvp5146", 0x5c), | |
1218 | .platform_data = &tvp5146_pdata, | |
1219 | }, | |
1e046d17 MH |
1220 | }, |
1221 | }; | |
1222 | ||
1223 | static struct vpif_capture_config da850_vpif_capture_config = { | |
1224 | .subdev_info = da850_vpif_capture_sdev_info, | |
1225 | .subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info), | |
1226 | .chan_config[0] = { | |
1227 | .inputs = da850_ch0_inputs, | |
1228 | .input_count = ARRAY_SIZE(da850_ch0_inputs), | |
0d4f35f3 HV |
1229 | .vpif_if = { |
1230 | .if_type = VPIF_IF_BT656, | |
1231 | .hd_pol = 1, | |
1232 | .vd_pol = 1, | |
1233 | .fid_pol = 0, | |
1234 | }, | |
1e046d17 MH |
1235 | }, |
1236 | .chan_config[1] = { | |
1237 | .inputs = da850_ch1_inputs, | |
1238 | .input_count = ARRAY_SIZE(da850_ch1_inputs), | |
0d4f35f3 HV |
1239 | .vpif_if = { |
1240 | .if_type = VPIF_IF_BT656, | |
1241 | .hd_pol = 1, | |
1242 | .vd_pol = 1, | |
1243 | .fid_pol = 0, | |
1244 | }, | |
1e046d17 MH |
1245 | }, |
1246 | .card_name = "DA850/OMAP-L138 Video Capture", | |
1247 | }; | |
1248 | ||
1249 | /* VPIF display configuration */ | |
3e85a44a LP |
1250 | |
1251 | static struct adv7343_platform_data adv7343_pdata = { | |
1252 | .mode_config = { | |
1253 | .dac_3 = 1, | |
1254 | .dac_2 = 1, | |
1255 | .dac_1 = 1, | |
1256 | }, | |
1257 | .sd_config = { | |
1258 | .sd_dac_out1 = 1, | |
1259 | }, | |
1260 | }; | |
1261 | ||
1e046d17 MH |
1262 | static struct vpif_subdev_info da850_vpif_subdev[] = { |
1263 | { | |
1264 | .name = "adv7343", | |
1265 | .board_info = { | |
1266 | I2C_BOARD_INFO("adv7343", 0x2a), | |
3e85a44a | 1267 | .platform_data = &adv7343_pdata, |
1e046d17 MH |
1268 | }, |
1269 | }, | |
1270 | }; | |
1271 | ||
2bd4e58c LP |
1272 | static const struct vpif_output da850_ch0_outputs[] = { |
1273 | { | |
1274 | .output = { | |
1275 | .index = 0, | |
1276 | .name = "Composite", | |
1277 | .type = V4L2_OUTPUT_TYPE_ANALOG, | |
1278 | .capabilities = V4L2_OUT_CAP_STD, | |
1279 | .std = V4L2_STD_ALL, | |
1280 | }, | |
1281 | .subdev_name = "adv7343", | |
1282 | .output_route = ADV7343_COMPOSITE_ID, | |
1283 | }, | |
1284 | { | |
1285 | .output = { | |
1286 | .index = 1, | |
1287 | .name = "S-Video", | |
1288 | .type = V4L2_OUTPUT_TYPE_ANALOG, | |
1289 | .capabilities = V4L2_OUT_CAP_STD, | |
1290 | .std = V4L2_STD_ALL, | |
1291 | }, | |
1292 | .subdev_name = "adv7343", | |
1293 | .output_route = ADV7343_SVIDEO_ID, | |
1294 | }, | |
1e046d17 MH |
1295 | }; |
1296 | ||
1297 | static struct vpif_display_config da850_vpif_display_config = { | |
1298 | .subdevinfo = da850_vpif_subdev, | |
1299 | .subdev_count = ARRAY_SIZE(da850_vpif_subdev), | |
2bd4e58c LP |
1300 | .chan_config[0] = { |
1301 | .outputs = da850_ch0_outputs, | |
1302 | .output_count = ARRAY_SIZE(da850_ch0_outputs), | |
1303 | }, | |
1e046d17 MH |
1304 | .card_name = "DA850/OMAP-L138 Video Display", |
1305 | }; | |
1306 | ||
1307 | static __init void da850_vpif_init(void) | |
1308 | { | |
1309 | int ret; | |
1310 | ||
1311 | ret = da850_register_vpif(); | |
1312 | if (ret) | |
1313 | pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret); | |
1314 | ||
1315 | ret = davinci_cfg_reg_list(da850_vpif_capture_pins); | |
1316 | if (ret) | |
1317 | pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n", | |
1318 | ret); | |
1319 | ||
1320 | ret = da850_register_vpif_capture(&da850_vpif_capture_config); | |
1321 | if (ret) | |
1322 | pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret); | |
1323 | ||
1324 | ret = davinci_cfg_reg_list(da850_vpif_display_pins); | |
1325 | if (ret) | |
1326 | pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n", | |
1327 | ret); | |
1328 | ||
1329 | ret = da850_register_vpif_display(&da850_vpif_display_config); | |
1330 | if (ret) | |
1331 | pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret); | |
1332 | } | |
1333 | ||
1334 | #else | |
1335 | static __init void da850_vpif_init(void) {} | |
1336 | #endif | |
1337 | ||
ab3f5c1f IY |
1338 | #ifdef CONFIG_DA850_WL12XX |
1339 | ||
1340 | static void wl12xx_set_power(int index, bool power_on) | |
1341 | { | |
1342 | static bool power_state; | |
1343 | ||
1344 | pr_debug("Powering %s wl12xx", power_on ? "on" : "off"); | |
1345 | ||
1346 | if (power_on == power_state) | |
1347 | return; | |
1348 | power_state = power_on; | |
1349 | ||
1350 | if (power_on) { | |
1351 | /* Power up sequence required for wl127x devices */ | |
1352 | gpio_set_value(DA850_WLAN_EN, 1); | |
1353 | usleep_range(15000, 15000); | |
1354 | gpio_set_value(DA850_WLAN_EN, 0); | |
1355 | usleep_range(1000, 1000); | |
1356 | gpio_set_value(DA850_WLAN_EN, 1); | |
1357 | msleep(70); | |
1358 | } else { | |
1359 | gpio_set_value(DA850_WLAN_EN, 0); | |
1360 | } | |
1361 | } | |
1362 | ||
1363 | static struct davinci_mmc_config da850_wl12xx_mmc_config = { | |
1364 | .set_power = wl12xx_set_power, | |
1365 | .wires = 4, | |
1366 | .max_freq = 25000000, | |
1367 | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE | | |
1368 | MMC_CAP_POWER_OFF_CARD, | |
ab3f5c1f IY |
1369 | }; |
1370 | ||
1371 | static const short da850_wl12xx_pins[] __initconst = { | |
1372 | DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2, | |
1373 | DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD, | |
1374 | DA850_GPIO6_9, DA850_GPIO6_10, | |
1375 | -1 | |
1376 | }; | |
1377 | ||
1378 | static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = { | |
1379 | .irq = -1, | |
1380 | .board_ref_clock = WL12XX_REFCLOCK_38, | |
1381 | .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ, | |
1382 | }; | |
1383 | ||
1384 | static __init int da850_wl12xx_init(void) | |
1385 | { | |
1386 | int ret; | |
1387 | ||
1388 | ret = davinci_cfg_reg_list(da850_wl12xx_pins); | |
1389 | if (ret) { | |
1390 | pr_err("wl12xx/mmc mux setup failed: %d\n", ret); | |
1391 | goto exit; | |
1392 | } | |
1393 | ||
1394 | ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config); | |
1395 | if (ret) { | |
1396 | pr_err("wl12xx/mmc registration failed: %d\n", ret); | |
1397 | goto exit; | |
1398 | } | |
1399 | ||
1400 | ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en"); | |
1401 | if (ret) { | |
1402 | pr_err("Could not request wl12xx enable gpio: %d\n", ret); | |
1403 | goto exit; | |
1404 | } | |
1405 | ||
1406 | ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq"); | |
1407 | if (ret) { | |
1408 | pr_err("Could not request wl12xx irq gpio: %d\n", ret); | |
1409 | goto free_wlan_en; | |
1410 | } | |
1411 | ||
1412 | da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ); | |
1413 | ||
1414 | ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data); | |
1415 | if (ret) { | |
1416 | pr_err("Could not set wl12xx data: %d\n", ret); | |
1417 | goto free_wlan_irq; | |
1418 | } | |
1419 | ||
1420 | return 0; | |
1421 | ||
1422 | free_wlan_irq: | |
1423 | gpio_free(DA850_WLAN_IRQ); | |
1424 | ||
1425 | free_wlan_en: | |
1426 | gpio_free(DA850_WLAN_EN); | |
1427 | ||
1428 | exit: | |
1429 | return ret; | |
1430 | } | |
1431 | ||
1432 | #else /* CONFIG_DA850_WL12XX */ | |
1433 | ||
1434 | static __init int da850_wl12xx_init(void) | |
1435 | { | |
1436 | return 0; | |
1437 | } | |
1438 | ||
1439 | #endif /* CONFIG_DA850_WL12XX */ | |
1440 | ||
8bb2c481 SN |
1441 | #define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000) |
1442 | ||
0fbc5592 SR |
1443 | static __init void da850_evm_init(void) |
1444 | { | |
1445 | int ret; | |
1446 | ||
a9eb1f67 SN |
1447 | ret = pmic_tps65070_init(); |
1448 | if (ret) | |
6c7c23cc | 1449 | pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret); |
a9eb1f67 | 1450 | |
a941c503 | 1451 | ret = da850_register_edma(da850_edma_rsv); |
0fbc5592 | 1452 | if (ret) |
6c7c23cc | 1453 | pr_warn("%s: EDMA registration failed: %d\n", __func__, ret); |
0fbc5592 | 1454 | |
3821d10a | 1455 | ret = davinci_cfg_reg_list(da850_i2c0_pins); |
0fbc5592 | 1456 | if (ret) |
6c7c23cc | 1457 | pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret); |
0fbc5592 SR |
1458 | |
1459 | ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata); | |
1460 | if (ret) | |
6c7c23cc | 1461 | pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret); |
0fbc5592 | 1462 | |
5a4b1315 | 1463 | |
0fbc5592 SR |
1464 | ret = da8xx_register_watchdog(); |
1465 | if (ret) | |
6c7c23cc RT |
1466 | pr_warn("%s: watchdog registration failed: %d\n", |
1467 | __func__, ret); | |
0fbc5592 | 1468 | |
820c4fe3 | 1469 | if (HAS_MMC) { |
5a0d80ea | 1470 | ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins); |
820c4fe3 | 1471 | if (ret) |
6c7c23cc RT |
1472 | pr_warn("%s: MMCSD0 mux setup failed: %d\n", |
1473 | __func__, ret); | |
820c4fe3 SR |
1474 | |
1475 | ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n"); | |
1476 | if (ret) | |
6c7c23cc RT |
1477 | pr_warn("%s: can not open GPIO %d\n", |
1478 | __func__, DA850_MMCSD_CD_PIN); | |
820c4fe3 SR |
1479 | gpio_direction_input(DA850_MMCSD_CD_PIN); |
1480 | ||
1481 | ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n"); | |
1482 | if (ret) | |
6c7c23cc RT |
1483 | pr_warn("%s: can not open GPIO %d\n", |
1484 | __func__, DA850_MMCSD_WP_PIN); | |
820c4fe3 SR |
1485 | gpio_direction_input(DA850_MMCSD_WP_PIN); |
1486 | ||
1487 | ret = da8xx_register_mmcsd0(&da850_mmc_config); | |
1488 | if (ret) | |
6c7c23cc RT |
1489 | pr_warn("%s: MMCSD0 registration failed: %d\n", |
1490 | __func__, ret); | |
ab3f5c1f IY |
1491 | |
1492 | ret = da850_wl12xx_init(); | |
1493 | if (ret) | |
6c7c23cc RT |
1494 | pr_warn("%s: WL12xx initialization failed: %d\n", |
1495 | __func__, ret); | |
820c4fe3 | 1496 | } |
700691f2 | 1497 | |
0fbc5592 SR |
1498 | davinci_serial_init(&da850_evm_uart_config); |
1499 | ||
1a7ff8ff C |
1500 | i2c_register_board_info(1, da850_evm_i2c_devices, |
1501 | ARRAY_SIZE(da850_evm_i2c_devices)); | |
1502 | ||
0fbc5592 SR |
1503 | /* |
1504 | * shut down uart 0 and 1; they are not used on the board and | |
1505 | * accessing them causes endless "too much work in irq53" messages | |
1506 | * with arago fs | |
1507 | */ | |
1508 | __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30); | |
1509 | __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30); | |
491214e1 | 1510 | |
c840fc74 | 1511 | ret = davinci_cfg_reg_list(da850_evm_mcasp_pins); |
491214e1 | 1512 | if (ret) |
6c7c23cc | 1513 | pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret); |
491214e1 | 1514 | |
88abfd5b | 1515 | da850_evm_snd_data.sram_pool = sram_get_gen_pool(); |
b8864aa4 | 1516 | da8xx_register_mcasp(0, &da850_evm_snd_data); |
5cbdf276 | 1517 | |
3821d10a | 1518 | ret = davinci_cfg_reg_list(da850_lcdcntl_pins); |
5cbdf276 | 1519 | if (ret) |
6c7c23cc | 1520 | pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret); |
5cbdf276 | 1521 | |
ae41d17a MP |
1522 | ret = da8xx_register_uio_pruss(); |
1523 | if (ret) | |
1524 | pr_warn("da850_evm_init: pruss initialization failed: %d\n", | |
1525 | ret); | |
1526 | ||
7761ef67 | 1527 | /* Handle board specific muxing for LCD here */ |
3821d10a | 1528 | ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); |
7761ef67 | 1529 | if (ret) |
6c7c23cc RT |
1530 | pr_warn("%s: EVM specific LCD mux setup failed: %d\n", |
1531 | __func__, ret); | |
7761ef67 | 1532 | |
5cbdf276 SR |
1533 | ret = da850_lcd_hw_init(); |
1534 | if (ret) | |
6c7c23cc | 1535 | pr_warn("%s: LCD initialization failed: %d\n", __func__, ret); |
5cbdf276 | 1536 | |
d52f235f | 1537 | sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl, |
b9e6342b | 1538 | ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); |
5cbdf276 | 1539 | if (ret) |
6c7c23cc | 1540 | pr_warn("%s: LCDC registration failed: %d\n", __func__, ret); |
c51df70b MG |
1541 | |
1542 | ret = da8xx_register_rtc(); | |
1543 | if (ret) | |
6c7c23cc | 1544 | pr_warn("%s: RTC setup failed: %d\n", __func__, ret); |
09dc2d45 | 1545 | |
28bd2c34 | 1546 | ret = da850_evm_init_cpufreq(); |
09dc2d45 | 1547 | if (ret) |
6c7c23cc | 1548 | pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret); |
5aeb15aa SN |
1549 | |
1550 | ret = da8xx_register_cpuidle(); | |
1551 | if (ret) | |
6c7c23cc | 1552 | pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret); |
63534443 SN |
1553 | |
1554 | ret = da850_register_pm(&da850_pm_device); | |
1555 | if (ret) | |
6c7c23cc | 1556 | pr_warn("%s: suspend registration failed: %d\n", __func__, ret); |
fdce5568 | 1557 | |
1e046d17 MH |
1558 | da850_vpif_init(); |
1559 | ||
0273612c VD |
1560 | ret = spi_register_board_info(da850evm_spi_info, |
1561 | ARRAY_SIZE(da850evm_spi_info)); | |
1562 | if (ret) | |
1563 | pr_warn("%s: spi info registration failed: %d\n", __func__, | |
1564 | ret); | |
1565 | ||
1566 | ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info)); | |
fdce5568 | 1567 | if (ret) |
6c7c23cc | 1568 | pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret); |
8bb2c481 SN |
1569 | |
1570 | ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE); | |
1571 | if (ret) | |
6c7c23cc | 1572 | pr_warn("%s: SATA registration failed: %d\n", __func__, ret); |
810198bc RS |
1573 | |
1574 | da850_evm_setup_mac_addr(); | |
54288134 RT |
1575 | |
1576 | ret = da8xx_register_rproc(); | |
1577 | if (ret) | |
1578 | pr_warn("%s: dsp/rproc registration failed: %d\n", | |
1579 | __func__, ret); | |
0fbc5592 SR |
1580 | } |
1581 | ||
1582 | #ifdef CONFIG_SERIAL_8250_CONSOLE | |
1583 | static int __init da850_evm_console_init(void) | |
1584 | { | |
1aa5f2a9 MW |
1585 | if (!machine_is_davinci_da850_evm()) |
1586 | return 0; | |
1587 | ||
0fbc5592 SR |
1588 | return add_preferred_console("ttyS", 2, "115200"); |
1589 | } | |
1590 | console_initcall(da850_evm_console_init); | |
1591 | #endif | |
1592 | ||
0fbc5592 SR |
1593 | static void __init da850_evm_map_io(void) |
1594 | { | |
1595 | da850_init(); | |
1596 | } | |
1597 | ||
48ea89ea | 1598 | MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") |
e7e56014 | 1599 | .atag_offset = 0x100, |
0fbc5592 | 1600 | .map_io = da850_evm_map_io, |
bd808947 | 1601 | .init_irq = cp_intc_init, |
6bb27d73 | 1602 | .init_time = davinci_timer_init, |
0fbc5592 | 1603 | .init_machine = da850_evm_init, |
3aa3e840 | 1604 | .init_late = davinci_init_late, |
f68deabf | 1605 | .dma_zone_size = SZ_128M, |
c6121ddd | 1606 | .restart = da8xx_restart, |
54288134 | 1607 | .reserve = da8xx_rproc_reserve_cma, |
0fbc5592 | 1608 | MACHINE_END |