Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | config ARM |
2 | bool | |
3 | default y | |
7563bbf8 | 4 | select ARCH_HAVE_CUSTOM_GPIO_H |
e17c6d56 | 5 | select HAVE_AOUT |
24056f52 | 6 | select HAVE_DMA_API_DEBUG |
d0ee9f40 | 7 | select HAVE_IDE if PCI || ISA || PCMCIA |
2dc6a016 | 8 | select HAVE_DMA_ATTRS |
c7909509 | 9 | select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) |
2778f620 | 10 | select HAVE_MEMBLOCK |
12b824fb | 11 | select RTC_LIB |
75e7153a | 12 | select SYS_SUPPORTS_APM_EMULATION |
a41297a0 | 13 | select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) |
7463449b | 14 | select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE |
fe166148 | 15 | select HAVE_OPROFILE if (HAVE_PERF_EVENTS) |
09f05d85 | 16 | select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL |
5cbad0eb | 17 | select HAVE_ARCH_KGDB |
0693bf68 | 18 | select HAVE_ARCH_TRACEHOOK |
856bc356 | 19 | select HAVE_KPROBES if !XIP_KERNEL |
9edddaa2 | 20 | select HAVE_KRETPROBES if (HAVE_KPROBES) |
606576ce | 21 | select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) |
80be7a7f RV |
22 | select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) |
23 | select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) | |
0e341af8 | 24 | select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) |
e39f5602 | 25 | select ARCH_BINFMT_ELF_RANDOMIZE_PIE |
1fe53268 | 26 | select HAVE_GENERIC_DMA_COHERENT |
e7db7b42 AT |
27 | select HAVE_KERNEL_GZIP |
28 | select HAVE_KERNEL_LZO | |
6e8699f7 | 29 | select HAVE_KERNEL_LZMA |
a7f464f3 | 30 | select HAVE_KERNEL_XZ |
e360adbe | 31 | select HAVE_IRQ_WORK |
7ada189f JI |
32 | select HAVE_PERF_EVENTS |
33 | select PERF_USE_VMALLOC | |
e513f8bf | 34 | select HAVE_REGS_AND_STACK_ACCESS_API |
e399b1a4 | 35 | select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) |
ed60453f | 36 | select HAVE_C_RECORDMCOUNT |
e2a93ecc | 37 | select HAVE_GENERIC_HARDIRQS |
37e74beb SB |
38 | select HARDIRQS_SW_RESEND |
39 | select GENERIC_IRQ_PROBE | |
25a5662a | 40 | select GENERIC_IRQ_SHOW |
c1d7e01d | 41 | select ARCH_WANT_IPC_PARSE_VERSION |
d4aa8b15 | 42 | select HARDIRQS_SW_RESEND |
1fb90263 | 43 | select CPU_PM if (SUSPEND || CPU_IDLE) |
e5bfb72c | 44 | select GENERIC_PCI_IOMAP |
e47b65b0 | 45 | select HAVE_BPF_JIT |
84ec6d57 | 46 | select GENERIC_SMP_IDLE_THREAD |
3d92a71a AMG |
47 | select KTIME_SCALAR |
48 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP | |
8c56cc8b WD |
49 | select GENERIC_STRNCPY_FROM_USER |
50 | select GENERIC_STRNLEN_USER | |
b9a50f74 | 51 | select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN |
1da177e4 LT |
52 | help |
53 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 54 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 55 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 56 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
57 | Europe. There is an ARM Linux project with a web page at |
58 | <http://www.arm.linux.org.uk/>. | |
59 | ||
74facffe RK |
60 | config ARM_HAS_SG_CHAIN |
61 | bool | |
62 | ||
4ce63fcd MS |
63 | config NEED_SG_DMA_LENGTH |
64 | bool | |
65 | ||
66 | config ARM_DMA_USE_IOMMU | |
67 | select NEED_SG_DMA_LENGTH | |
68 | select ARM_HAS_SG_CHAIN | |
69 | bool | |
70 | ||
1a189b97 RK |
71 | config HAVE_PWM |
72 | bool | |
73 | ||
0b05da72 HUK |
74 | config MIGHT_HAVE_PCI |
75 | bool | |
76 | ||
75e7153a RB |
77 | config SYS_SUPPORTS_APM_EMULATION |
78 | bool | |
79 | ||
0a938b97 DB |
80 | config GENERIC_GPIO |
81 | bool | |
0a938b97 | 82 | |
bc581770 LW |
83 | config HAVE_TCM |
84 | bool | |
85 | select GENERIC_ALLOCATOR | |
86 | ||
e119bfff RK |
87 | config HAVE_PROC_CPU |
88 | bool | |
89 | ||
5ea81769 AV |
90 | config NO_IOPORT |
91 | bool | |
5ea81769 | 92 | |
1da177e4 LT |
93 | config EISA |
94 | bool | |
95 | ---help--- | |
96 | The Extended Industry Standard Architecture (EISA) bus was | |
97 | developed as an open alternative to the IBM MicroChannel bus. | |
98 | ||
99 | The EISA bus provided some of the features of the IBM MicroChannel | |
100 | bus while maintaining backward compatibility with cards made for | |
101 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
102 | 1995 when it was made obsolete by the PCI bus. | |
103 | ||
104 | Say Y here if you are building a kernel for an EISA-based machine. | |
105 | ||
106 | Otherwise, say N. | |
107 | ||
108 | config SBUS | |
109 | bool | |
110 | ||
f16fb1ec RK |
111 | config STACKTRACE_SUPPORT |
112 | bool | |
113 | default y | |
114 | ||
f76e9154 NP |
115 | config HAVE_LATENCYTOP_SUPPORT |
116 | bool | |
117 | depends on !SMP | |
118 | default y | |
119 | ||
f16fb1ec RK |
120 | config LOCKDEP_SUPPORT |
121 | bool | |
122 | default y | |
123 | ||
7ad1bcb2 RK |
124 | config TRACE_IRQFLAGS_SUPPORT |
125 | bool | |
126 | default y | |
127 | ||
1da177e4 LT |
128 | config RWSEM_GENERIC_SPINLOCK |
129 | bool | |
130 | default y | |
131 | ||
132 | config RWSEM_XCHGADD_ALGORITHM | |
133 | bool | |
134 | ||
f0d1b0b3 DH |
135 | config ARCH_HAS_ILOG2_U32 |
136 | bool | |
f0d1b0b3 DH |
137 | |
138 | config ARCH_HAS_ILOG2_U64 | |
139 | bool | |
f0d1b0b3 | 140 | |
89c52ed4 BD |
141 | config ARCH_HAS_CPUFREQ |
142 | bool | |
143 | help | |
144 | Internal node to signify that the ARCH has CPUFREQ support | |
145 | and that the relevant menu configurations are displayed for | |
146 | it. | |
147 | ||
b89c3b16 AM |
148 | config GENERIC_HWEIGHT |
149 | bool | |
150 | default y | |
151 | ||
1da177e4 LT |
152 | config GENERIC_CALIBRATE_DELAY |
153 | bool | |
154 | default y | |
155 | ||
a08b6b79 AV |
156 | config ARCH_MAY_HAVE_PC_FDC |
157 | bool | |
158 | ||
5ac6da66 CL |
159 | config ZONE_DMA |
160 | bool | |
5ac6da66 | 161 | |
ccd7ab7f FT |
162 | config NEED_DMA_MAP_STATE |
163 | def_bool y | |
164 | ||
58af4a24 RH |
165 | config ARCH_HAS_DMA_SET_COHERENT_MASK |
166 | bool | |
167 | ||
1da177e4 LT |
168 | config GENERIC_ISA_DMA |
169 | bool | |
170 | ||
1da177e4 LT |
171 | config FIQ |
172 | bool | |
173 | ||
13a5045d RH |
174 | config NEED_RET_TO_USER |
175 | bool | |
176 | ||
034d2f5a AV |
177 | config ARCH_MTD_XIP |
178 | bool | |
179 | ||
c760fc19 HC |
180 | config VECTORS_BASE |
181 | hex | |
6afd6fae | 182 | default 0xffff0000 if MMU || CPU_HIGH_VECTOR |
c760fc19 HC |
183 | default DRAM_BASE if REMAP_VECTORS_TO_RAM |
184 | default 0x00000000 | |
185 | help | |
186 | The base address of exception vectors. | |
187 | ||
dc21af99 | 188 | config ARM_PATCH_PHYS_VIRT |
c1becedc RK |
189 | bool "Patch physical to virtual translations at runtime" if EMBEDDED |
190 | default y | |
b511d75d | 191 | depends on !XIP_KERNEL && MMU |
dc21af99 RK |
192 | depends on !ARCH_REALVIEW || !SPARSEMEM |
193 | help | |
111e9a5c RK |
194 | Patch phys-to-virt and virt-to-phys translation functions at |
195 | boot and module load time according to the position of the | |
196 | kernel in system memory. | |
dc21af99 | 197 | |
111e9a5c | 198 | This can only be used with non-XIP MMU kernels where the base |
daece596 | 199 | of physical memory is at a 16MB boundary. |
dc21af99 | 200 | |
c1becedc RK |
201 | Only disable this option if you know that you do not require |
202 | this feature (eg, building a kernel for a single machine) and | |
203 | you need to shrink the kernel to the minimal size. | |
dc21af99 | 204 | |
c334bc15 RH |
205 | config NEED_MACH_IO_H |
206 | bool | |
207 | help | |
208 | Select this when mach/io.h is required to provide special | |
209 | definitions for this platform. The need for mach/io.h should | |
210 | be avoided when possible. | |
211 | ||
0cdc8b92 | 212 | config NEED_MACH_MEMORY_H |
1b9f95f8 NP |
213 | bool |
214 | help | |
0cdc8b92 NP |
215 | Select this when mach/memory.h is required to provide special |
216 | definitions for this platform. The need for mach/memory.h should | |
217 | be avoided when possible. | |
dc21af99 | 218 | |
1b9f95f8 | 219 | config PHYS_OFFSET |
974c0724 | 220 | hex "Physical address of main memory" if MMU |
0cdc8b92 | 221 | depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H |
974c0724 | 222 | default DRAM_BASE if !MMU |
111e9a5c | 223 | help |
1b9f95f8 NP |
224 | Please provide the physical address corresponding to the |
225 | location of main memory in your system. | |
cada3c08 | 226 | |
87e040b6 SG |
227 | config GENERIC_BUG |
228 | def_bool y | |
229 | depends on BUG | |
230 | ||
1da177e4 LT |
231 | source "init/Kconfig" |
232 | ||
dc52ddc0 MH |
233 | source "kernel/Kconfig.freezer" |
234 | ||
1da177e4 LT |
235 | menu "System Type" |
236 | ||
3c427975 HC |
237 | config MMU |
238 | bool "MMU-based Paged Memory Management Support" | |
239 | default y | |
240 | help | |
241 | Select if you want MMU-based virtualised addressing space | |
242 | support by paged memory management. If unsure, say 'Y'. | |
243 | ||
ccf50e23 RK |
244 | # |
245 | # The "ARM system type" choice list is ordered alphabetically by option | |
246 | # text. Please add new entries in the option alphabetic order. | |
247 | # | |
1da177e4 LT |
248 | choice |
249 | prompt "ARM system type" | |
6a0e2430 | 250 | default ARCH_VERSATILE |
1da177e4 | 251 | |
66314223 DN |
252 | config ARCH_SOCFPGA |
253 | bool "Altera SOCFPGA family" | |
254 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
255 | select ARM_AMBA | |
256 | select ARM_GIC | |
257 | select CACHE_L2X0 | |
258 | select CLKDEV_LOOKUP | |
259 | select COMMON_CLK | |
260 | select CPU_V7 | |
261 | select DW_APB_TIMER | |
262 | select DW_APB_TIMER_OF | |
263 | select GENERIC_CLOCKEVENTS | |
264 | select GPIO_PL061 if GPIOLIB | |
265 | select HAVE_ARM_SCU | |
266 | select SPARSE_IRQ | |
267 | select USE_OF | |
268 | help | |
269 | This enables support for Altera SOCFPGA Cyclone V platform | |
270 | ||
4af6fee1 DS |
271 | config ARCH_INTEGRATOR |
272 | bool "ARM Ltd. Integrator family" | |
273 | select ARM_AMBA | |
89c52ed4 | 274 | select ARCH_HAS_CPUFREQ |
a613163d LW |
275 | select COMMON_CLK |
276 | select CLK_VERSATILE | |
9904f793 | 277 | select HAVE_TCM |
c5a0adb5 | 278 | select ICST |
13edd86d | 279 | select GENERIC_CLOCKEVENTS |
f4b8b319 | 280 | select PLAT_VERSATILE |
c41b16f8 | 281 | select PLAT_VERSATILE_FPGA_IRQ |
c334bc15 | 282 | select NEED_MACH_IO_H |
0cdc8b92 | 283 | select NEED_MACH_MEMORY_H |
695436e3 | 284 | select SPARSE_IRQ |
3108e6ab | 285 | select MULTI_IRQ_HANDLER |
4af6fee1 DS |
286 | help |
287 | Support for ARM's Integrator platform. | |
288 | ||
289 | config ARCH_REALVIEW | |
290 | bool "ARM Ltd. RealView family" | |
291 | select ARM_AMBA | |
6d803ba7 | 292 | select CLKDEV_LOOKUP |
aa3831cf | 293 | select HAVE_MACH_CLKDEV |
c5a0adb5 | 294 | select ICST |
ae30ceac | 295 | select GENERIC_CLOCKEVENTS |
eb7fffa3 | 296 | select ARCH_WANT_OPTIONAL_GPIOLIB |
f4b8b319 | 297 | select PLAT_VERSATILE |
56a34b03 | 298 | select PLAT_VERSATILE_CLOCK |
3cb5ee49 | 299 | select PLAT_VERSATILE_CLCD |
e3887714 | 300 | select ARM_TIMER_SP804 |
b56ba8aa | 301 | select GPIO_PL061 if GPIOLIB |
0cdc8b92 | 302 | select NEED_MACH_MEMORY_H |
4af6fee1 DS |
303 | help |
304 | This enables support for ARM Ltd RealView boards. | |
305 | ||
306 | config ARCH_VERSATILE | |
307 | bool "ARM Ltd. Versatile family" | |
308 | select ARM_AMBA | |
309 | select ARM_VIC | |
6d803ba7 | 310 | select CLKDEV_LOOKUP |
aa3831cf | 311 | select HAVE_MACH_CLKDEV |
c5a0adb5 | 312 | select ICST |
89df1272 | 313 | select GENERIC_CLOCKEVENTS |
bbeddc43 | 314 | select ARCH_WANT_OPTIONAL_GPIOLIB |
9b0f7e39 | 315 | select NEED_MACH_IO_H if PCI |
f4b8b319 | 316 | select PLAT_VERSATILE |
56a34b03 | 317 | select PLAT_VERSATILE_CLOCK |
3414ba8c | 318 | select PLAT_VERSATILE_CLCD |
c41b16f8 | 319 | select PLAT_VERSATILE_FPGA_IRQ |
e3887714 | 320 | select ARM_TIMER_SP804 |
4af6fee1 DS |
321 | help |
322 | This enables support for ARM Ltd Versatile board. | |
323 | ||
ceade897 RK |
324 | config ARCH_VEXPRESS |
325 | bool "ARM Ltd. Versatile Express family" | |
326 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
327 | select ARM_AMBA | |
328 | select ARM_TIMER_SP804 | |
6d803ba7 | 329 | select CLKDEV_LOOKUP |
d1b8a775 | 330 | select COMMON_CLK |
ceade897 | 331 | select GENERIC_CLOCKEVENTS |
ceade897 | 332 | select HAVE_CLK |
95c34f83 | 333 | select HAVE_PATA_PLATFORM |
ceade897 | 334 | select ICST |
ba81f502 | 335 | select NO_IOPORT |
ceade897 | 336 | select PLAT_VERSATILE |
0fb44b91 | 337 | select PLAT_VERSATILE_CLCD |
b2a54ff0 | 338 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
ceade897 RK |
339 | help |
340 | This enables support for the ARM Ltd Versatile Express boards. | |
341 | ||
8fc5ffa0 AV |
342 | config ARCH_AT91 |
343 | bool "Atmel AT91" | |
f373e8c0 | 344 | select ARCH_REQUIRE_GPIOLIB |
93686ae8 | 345 | select HAVE_CLK |
bd602995 | 346 | select CLKDEV_LOOKUP |
e261501d | 347 | select IRQ_DOMAIN |
1ac02d79 | 348 | select NEED_MACH_IO_H if PCCARD |
4af6fee1 | 349 | help |
929e994f NF |
350 | This enables support for systems based on Atmel |
351 | AT91RM9200 and AT91SAM9* processors. | |
4af6fee1 | 352 | |
ccf50e23 RK |
353 | config ARCH_BCMRING |
354 | bool "Broadcom BCMRING" | |
355 | depends on MMU | |
356 | select CPU_V6 | |
357 | select ARM_AMBA | |
82d63734 | 358 | select ARM_TIMER_SP804 |
6d803ba7 | 359 | select CLKDEV_LOOKUP |
ccf50e23 RK |
360 | select GENERIC_CLOCKEVENTS |
361 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
362 | help | |
363 | Support for Broadcom's BCMRing platform. | |
364 | ||
220e6cf7 RH |
365 | config ARCH_HIGHBANK |
366 | bool "Calxeda Highbank-based" | |
367 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
368 | select ARM_AMBA | |
369 | select ARM_GIC | |
370 | select ARM_TIMER_SP804 | |
22d80379 | 371 | select CACHE_L2X0 |
220e6cf7 | 372 | select CLKDEV_LOOKUP |
8d4d9f52 | 373 | select COMMON_CLK |
220e6cf7 RH |
374 | select CPU_V7 |
375 | select GENERIC_CLOCKEVENTS | |
376 | select HAVE_ARM_SCU | |
3b55658a | 377 | select HAVE_SMP |
fdfa64a4 | 378 | select SPARSE_IRQ |
220e6cf7 RH |
379 | select USE_OF |
380 | help | |
381 | Support for the Calxeda Highbank SoC based boards. | |
382 | ||
1da177e4 | 383 | config ARCH_CLPS711X |
0e2fce59 | 384 | bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" |
c750815e | 385 | select CPU_ARM720T |
5cfc8ee0 | 386 | select ARCH_USES_GETTIMEOFFSET |
0cdc8b92 | 387 | select NEED_MACH_MEMORY_H |
f999b8bd | 388 | help |
0e2fce59 | 389 | Support for Cirrus Logic 711x/721x/731x based boards. |
1da177e4 | 390 | |
d94f944e AV |
391 | config ARCH_CNS3XXX |
392 | bool "Cavium Networks CNS3XXX family" | |
00d2711d | 393 | select CPU_V6K |
d94f944e AV |
394 | select GENERIC_CLOCKEVENTS |
395 | select ARM_GIC | |
ce5ea9f3 | 396 | select MIGHT_HAVE_CACHE_L2X0 |
0b05da72 | 397 | select MIGHT_HAVE_PCI |
5f32f7a0 | 398 | select PCI_DOMAINS if PCI |
d94f944e AV |
399 | help |
400 | Support for Cavium Networks CNS3XXX platform. | |
401 | ||
788c9700 RK |
402 | config ARCH_GEMINI |
403 | bool "Cortina Systems Gemini" | |
404 | select CPU_FA526 | |
788c9700 | 405 | select ARCH_REQUIRE_GPIOLIB |
5cfc8ee0 | 406 | select ARCH_USES_GETTIMEOFFSET |
788c9700 RK |
407 | help |
408 | Support for the Cortina Systems Gemini family SoCs | |
409 | ||
3a6cb8ce AB |
410 | config ARCH_PRIMA2 |
411 | bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" | |
412 | select CPU_V7 | |
3a6cb8ce | 413 | select NO_IOPORT |
f6387092 | 414 | select ARCH_REQUIRE_GPIOLIB |
3a6cb8ce AB |
415 | select GENERIC_CLOCKEVENTS |
416 | select CLKDEV_LOOKUP | |
417 | select GENERIC_IRQ_CHIP | |
ce5ea9f3 | 418 | select MIGHT_HAVE_CACHE_L2X0 |
cbd8d842 BS |
419 | select PINCTRL |
420 | select PINCTRL_SIRF | |
3a6cb8ce AB |
421 | select USE_OF |
422 | select ZONE_DMA | |
423 | help | |
424 | Support for CSR SiRFSoC ARM Cortex A9 Platform | |
425 | ||
1da177e4 LT |
426 | config ARCH_EBSA110 |
427 | bool "EBSA-110" | |
c750815e | 428 | select CPU_SA110 |
f7e68bbf | 429 | select ISA |
c5eb2a2b | 430 | select NO_IOPORT |
5cfc8ee0 | 431 | select ARCH_USES_GETTIMEOFFSET |
c334bc15 | 432 | select NEED_MACH_IO_H |
0cdc8b92 | 433 | select NEED_MACH_MEMORY_H |
1da177e4 LT |
434 | help |
435 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 436 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
437 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
438 | parallel port. | |
439 | ||
e7736d47 LB |
440 | config ARCH_EP93XX |
441 | bool "EP93xx-based" | |
c750815e | 442 | select CPU_ARM920T |
e7736d47 LB |
443 | select ARM_AMBA |
444 | select ARM_VIC | |
6d803ba7 | 445 | select CLKDEV_LOOKUP |
7444a72e | 446 | select ARCH_REQUIRE_GPIOLIB |
eb33575c | 447 | select ARCH_HAS_HOLES_MEMORYMODEL |
5cfc8ee0 | 448 | select ARCH_USES_GETTIMEOFFSET |
5725aeae | 449 | select NEED_MACH_MEMORY_H |
e7736d47 LB |
450 | help |
451 | This enables support for the Cirrus EP93xx series of CPUs. | |
452 | ||
1da177e4 LT |
453 | config ARCH_FOOTBRIDGE |
454 | bool "FootBridge" | |
c750815e | 455 | select CPU_SA110 |
1da177e4 | 456 | select FOOTBRIDGE |
4e8d7637 | 457 | select GENERIC_CLOCKEVENTS |
d0ee9f40 | 458 | select HAVE_IDE |
c334bc15 | 459 | select NEED_MACH_IO_H |
0cdc8b92 | 460 | select NEED_MACH_MEMORY_H |
f999b8bd MM |
461 | help |
462 | Support for systems based on the DC21285 companion chip | |
463 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 464 | |
788c9700 RK |
465 | config ARCH_MXC |
466 | bool "Freescale MXC/iMX-based" | |
788c9700 | 467 | select GENERIC_CLOCKEVENTS |
788c9700 | 468 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 469 | select CLKDEV_LOOKUP |
234b6ced | 470 | select CLKSRC_MMIO |
8b6c44f1 | 471 | select GENERIC_IRQ_CHIP |
ffa2ea3f | 472 | select MULTI_IRQ_HANDLER |
8842a9e2 | 473 | select SPARSE_IRQ |
3e62af82 | 474 | select USE_OF |
788c9700 RK |
475 | help |
476 | Support for Freescale MXC/iMX-based family of processors | |
477 | ||
1d3f33d5 SG |
478 | config ARCH_MXS |
479 | bool "Freescale MXS-based" | |
480 | select GENERIC_CLOCKEVENTS | |
481 | select ARCH_REQUIRE_GPIOLIB | |
b9214b97 | 482 | select CLKDEV_LOOKUP |
5c61ddcf | 483 | select CLKSRC_MMIO |
2664681f | 484 | select COMMON_CLK |
6abda3e1 | 485 | select HAVE_CLK_PREPARE |
a0f5e363 | 486 | select PINCTRL |
6c4d4efb | 487 | select USE_OF |
1d3f33d5 SG |
488 | help |
489 | Support for Freescale MXS-based family of processors | |
490 | ||
4af6fee1 DS |
491 | config ARCH_NETX |
492 | bool "Hilscher NetX based" | |
234b6ced | 493 | select CLKSRC_MMIO |
c750815e | 494 | select CPU_ARM926T |
4af6fee1 | 495 | select ARM_VIC |
2fcfe6b8 | 496 | select GENERIC_CLOCKEVENTS |
f999b8bd | 497 | help |
4af6fee1 DS |
498 | This enables support for systems based on the Hilscher NetX Soc |
499 | ||
500 | config ARCH_H720X | |
501 | bool "Hynix HMS720x-based" | |
c750815e | 502 | select CPU_ARM720T |
4af6fee1 | 503 | select ISA_DMA_API |
5cfc8ee0 | 504 | select ARCH_USES_GETTIMEOFFSET |
4af6fee1 DS |
505 | help |
506 | This enables support for systems based on the Hynix HMS720x | |
507 | ||
3b938be6 RK |
508 | config ARCH_IOP13XX |
509 | bool "IOP13xx-based" | |
510 | depends on MMU | |
c750815e | 511 | select CPU_XSC3 |
3b938be6 RK |
512 | select PLAT_IOP |
513 | select PCI | |
514 | select ARCH_SUPPORTS_MSI | |
8d5796d2 | 515 | select VMSPLIT_1G |
c334bc15 | 516 | select NEED_MACH_IO_H |
0cdc8b92 | 517 | select NEED_MACH_MEMORY_H |
13a5045d | 518 | select NEED_RET_TO_USER |
3b938be6 RK |
519 | help |
520 | Support for Intel's IOP13XX (XScale) family of processors. | |
521 | ||
3f7e5815 LB |
522 | config ARCH_IOP32X |
523 | bool "IOP32x-based" | |
a4f7e763 | 524 | depends on MMU |
c750815e | 525 | select CPU_XSCALE |
c334bc15 | 526 | select NEED_MACH_IO_H |
13a5045d | 527 | select NEED_RET_TO_USER |
7ae1f7ec | 528 | select PLAT_IOP |
f7e68bbf | 529 | select PCI |
bb2b180c | 530 | select ARCH_REQUIRE_GPIOLIB |
f999b8bd | 531 | help |
3f7e5815 LB |
532 | Support for Intel's 80219 and IOP32X (XScale) family of |
533 | processors. | |
534 | ||
535 | config ARCH_IOP33X | |
536 | bool "IOP33x-based" | |
537 | depends on MMU | |
c750815e | 538 | select CPU_XSCALE |
c334bc15 | 539 | select NEED_MACH_IO_H |
13a5045d | 540 | select NEED_RET_TO_USER |
7ae1f7ec | 541 | select PLAT_IOP |
3f7e5815 | 542 | select PCI |
bb2b180c | 543 | select ARCH_REQUIRE_GPIOLIB |
3f7e5815 LB |
544 | help |
545 | Support for Intel's IOP33X (XScale) family of processors. | |
1da177e4 | 546 | |
3b938be6 RK |
547 | config ARCH_IXP4XX |
548 | bool "IXP4xx-based" | |
a4f7e763 | 549 | depends on MMU |
58af4a24 | 550 | select ARCH_HAS_DMA_SET_COHERENT_MASK |
234b6ced | 551 | select CLKSRC_MMIO |
c750815e | 552 | select CPU_XSCALE |
9dde0ae3 | 553 | select ARCH_REQUIRE_GPIOLIB |
3b938be6 | 554 | select GENERIC_CLOCKEVENTS |
0b05da72 | 555 | select MIGHT_HAVE_PCI |
c334bc15 | 556 | select NEED_MACH_IO_H |
485bdde7 | 557 | select DMABOUNCE if PCI |
c4713074 | 558 | help |
3b938be6 | 559 | Support for Intel's IXP4XX (XScale) family of processors. |
c4713074 | 560 | |
3e93a22b GC |
561 | config ARCH_MVEBU |
562 | bool "Marvell SOCs with Device Tree support" | |
563 | select GENERIC_CLOCKEVENTS | |
564 | select MULTI_IRQ_HANDLER | |
565 | select SPARSE_IRQ | |
566 | select CLKSRC_MMIO | |
567 | select GENERIC_IRQ_CHIP | |
568 | select IRQ_DOMAIN | |
569 | select COMMON_CLK | |
570 | help | |
571 | Support for the Marvell SoC Family with device tree support | |
572 | ||
edabd38e SB |
573 | config ARCH_DOVE |
574 | bool "Marvell Dove" | |
7b769bb3 | 575 | select CPU_V7 |
edabd38e | 576 | select PCI |
edabd38e | 577 | select ARCH_REQUIRE_GPIOLIB |
edabd38e | 578 | select GENERIC_CLOCKEVENTS |
c334bc15 | 579 | select NEED_MACH_IO_H |
edabd38e SB |
580 | select PLAT_ORION |
581 | help | |
582 | Support for the Marvell Dove SoC 88AP510 | |
583 | ||
651c74c7 SB |
584 | config ARCH_KIRKWOOD |
585 | bool "Marvell Kirkwood" | |
c750815e | 586 | select CPU_FEROCEON |
651c74c7 | 587 | select PCI |
a8865655 | 588 | select ARCH_REQUIRE_GPIOLIB |
651c74c7 | 589 | select GENERIC_CLOCKEVENTS |
c334bc15 | 590 | select NEED_MACH_IO_H |
651c74c7 SB |
591 | select PLAT_ORION |
592 | help | |
593 | Support for the following Marvell Kirkwood series SoCs: | |
594 | 88F6180, 88F6192 and 88F6281. | |
595 | ||
40805949 KW |
596 | config ARCH_LPC32XX |
597 | bool "NXP LPC32XX" | |
234b6ced | 598 | select CLKSRC_MMIO |
40805949 KW |
599 | select CPU_ARM926T |
600 | select ARCH_REQUIRE_GPIOLIB | |
601 | select HAVE_IDE | |
602 | select ARM_AMBA | |
603 | select USB_ARCH_HAS_OHCI | |
6d803ba7 | 604 | select CLKDEV_LOOKUP |
40805949 | 605 | select GENERIC_CLOCKEVENTS |
f5c42271 | 606 | select USE_OF |
c49a1830 | 607 | select HAVE_PWM |
40805949 KW |
608 | help |
609 | Support for the NXP LPC32XX family of processors | |
610 | ||
794d15b2 SS |
611 | config ARCH_MV78XX0 |
612 | bool "Marvell MV78xx0" | |
c750815e | 613 | select CPU_FEROCEON |
794d15b2 | 614 | select PCI |
a8865655 | 615 | select ARCH_REQUIRE_GPIOLIB |
794d15b2 | 616 | select GENERIC_CLOCKEVENTS |
c334bc15 | 617 | select NEED_MACH_IO_H |
794d15b2 SS |
618 | select PLAT_ORION |
619 | help | |
620 | Support for the following Marvell MV78xx0 series SoCs: | |
621 | MV781x0, MV782x0. | |
622 | ||
9dd0b194 | 623 | config ARCH_ORION5X |
585cf175 TP |
624 | bool "Marvell Orion" |
625 | depends on MMU | |
c750815e | 626 | select CPU_FEROCEON |
038ee083 | 627 | select PCI |
a8865655 | 628 | select ARCH_REQUIRE_GPIOLIB |
51cbff1d | 629 | select GENERIC_CLOCKEVENTS |
b5e12229 | 630 | select NEED_MACH_IO_H |
69b02f6a | 631 | select PLAT_ORION |
585cf175 | 632 | help |
9dd0b194 | 633 | Support for the following Marvell Orion 5x series SoCs: |
d2b2a6bb | 634 | Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), |
d323ade1 | 635 | Orion-2 (5281), Orion-1-90 (6183). |
585cf175 | 636 | |
788c9700 | 637 | config ARCH_MMP |
2f7e8fae | 638 | bool "Marvell PXA168/910/MMP2" |
788c9700 | 639 | depends on MMU |
788c9700 | 640 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 641 | select CLKDEV_LOOKUP |
788c9700 | 642 | select GENERIC_CLOCKEVENTS |
157d2644 | 643 | select GPIO_PXA |
c24b3114 | 644 | select IRQ_DOMAIN |
788c9700 | 645 | select PLAT_PXA |
0bd86961 | 646 | select SPARSE_IRQ |
3c7241bd | 647 | select GENERIC_ALLOCATOR |
788c9700 | 648 | help |
2f7e8fae | 649 | Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. |
788c9700 RK |
650 | |
651 | config ARCH_KS8695 | |
652 | bool "Micrel/Kendin KS8695" | |
653 | select CPU_ARM922T | |
98830bc9 | 654 | select ARCH_REQUIRE_GPIOLIB |
5cfc8ee0 | 655 | select ARCH_USES_GETTIMEOFFSET |
0cdc8b92 | 656 | select NEED_MACH_MEMORY_H |
788c9700 RK |
657 | help |
658 | Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based | |
659 | System-on-Chip devices. | |
660 | ||
788c9700 RK |
661 | config ARCH_W90X900 |
662 | bool "Nuvoton W90X900 CPU" | |
663 | select CPU_ARM926T | |
c52d3d68 | 664 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 665 | select CLKDEV_LOOKUP |
6fa5d5f7 | 666 | select CLKSRC_MMIO |
58b5369e | 667 | select GENERIC_CLOCKEVENTS |
788c9700 | 668 | help |
a8bc4ead | 669 | Support for Nuvoton (Winbond logic dept.) ARM9 processor, |
670 | At present, the w90x900 has been renamed nuc900, regarding | |
671 | the ARM series product line, you can login the following | |
672 | link address to know more. | |
673 | ||
674 | <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ | |
675 | ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> | |
788c9700 | 676 | |
c5f80065 EG |
677 | config ARCH_TEGRA |
678 | bool "NVIDIA Tegra" | |
4073723a | 679 | select CLKDEV_LOOKUP |
234b6ced | 680 | select CLKSRC_MMIO |
c5f80065 EG |
681 | select GENERIC_CLOCKEVENTS |
682 | select GENERIC_GPIO | |
683 | select HAVE_CLK | |
3b55658a | 684 | select HAVE_SMP |
ce5ea9f3 | 685 | select MIGHT_HAVE_CACHE_L2X0 |
c334bc15 | 686 | select NEED_MACH_IO_H if PCI |
7056d423 | 687 | select ARCH_HAS_CPUFREQ |
2c95b7e0 | 688 | select USE_OF |
c5f80065 EG |
689 | help |
690 | This enables support for NVIDIA Tegra based systems (Tegra APX, | |
691 | Tegra 6xx and Tegra 2 series). | |
692 | ||
af75655c JI |
693 | config ARCH_PICOXCELL |
694 | bool "Picochip picoXcell" | |
695 | select ARCH_REQUIRE_GPIOLIB | |
696 | select ARM_PATCH_PHYS_VIRT | |
697 | select ARM_VIC | |
698 | select CPU_V6K | |
699 | select DW_APB_TIMER | |
cfda5901 | 700 | select DW_APB_TIMER_OF |
af75655c JI |
701 | select GENERIC_CLOCKEVENTS |
702 | select GENERIC_GPIO | |
af75655c JI |
703 | select HAVE_TCM |
704 | select NO_IOPORT | |
98e27a5c | 705 | select SPARSE_IRQ |
af75655c JI |
706 | select USE_OF |
707 | help | |
708 | This enables support for systems based on the Picochip picoXcell | |
709 | family of Femtocell devices. The picoxcell support requires device tree | |
710 | for all boards. | |
711 | ||
4af6fee1 DS |
712 | config ARCH_PNX4008 |
713 | bool "Philips Nexperia PNX4008 Mobile" | |
c750815e | 714 | select CPU_ARM926T |
6d803ba7 | 715 | select CLKDEV_LOOKUP |
5cfc8ee0 | 716 | select ARCH_USES_GETTIMEOFFSET |
4af6fee1 DS |
717 | help |
718 | This enables support for Philips PNX4008 mobile platform. | |
719 | ||
1da177e4 | 720 | config ARCH_PXA |
2c8086a5 | 721 | bool "PXA2xx/PXA3xx-based" |
a4f7e763 | 722 | depends on MMU |
034d2f5a | 723 | select ARCH_MTD_XIP |
89c52ed4 | 724 | select ARCH_HAS_CPUFREQ |
6d803ba7 | 725 | select CLKDEV_LOOKUP |
234b6ced | 726 | select CLKSRC_MMIO |
7444a72e | 727 | select ARCH_REQUIRE_GPIOLIB |
981d0f39 | 728 | select GENERIC_CLOCKEVENTS |
157d2644 | 729 | select GPIO_PXA |
bd5ce433 | 730 | select PLAT_PXA |
6ac6b817 | 731 | select SPARSE_IRQ |
4e234cc0 | 732 | select AUTO_ZRELADDR |
8a97ae2f | 733 | select MULTI_IRQ_HANDLER |
15e0d9e3 | 734 | select ARM_CPU_SUSPEND if PM |
d0ee9f40 | 735 | select HAVE_IDE |
f999b8bd | 736 | help |
2c8086a5 | 737 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
1da177e4 | 738 | |
788c9700 RK |
739 | config ARCH_MSM |
740 | bool "Qualcomm MSM" | |
4b536b8d | 741 | select HAVE_CLK |
49cbe786 | 742 | select GENERIC_CLOCKEVENTS |
923a081c | 743 | select ARCH_REQUIRE_GPIOLIB |
bd32344a | 744 | select CLKDEV_LOOKUP |
49cbe786 | 745 | help |
4b53eb4f DW |
746 | Support for Qualcomm MSM/QSD based systems. This runs on the |
747 | apps processor of the MSM/QSD and depends on a shared memory | |
748 | interface to the modem processor which runs the baseband | |
749 | stack and controls some vital subsystems | |
750 | (clock and power control, etc). | |
49cbe786 | 751 | |
c793c1b0 | 752 | config ARCH_SHMOBILE |
6d72ad35 PM |
753 | bool "Renesas SH-Mobile / R-Mobile" |
754 | select HAVE_CLK | |
5e93c6b4 | 755 | select CLKDEV_LOOKUP |
aa3831cf | 756 | select HAVE_MACH_CLKDEV |
3b55658a | 757 | select HAVE_SMP |
6d72ad35 | 758 | select GENERIC_CLOCKEVENTS |
ce5ea9f3 | 759 | select MIGHT_HAVE_CACHE_L2X0 |
6d72ad35 PM |
760 | select NO_IOPORT |
761 | select SPARSE_IRQ | |
60f1435c | 762 | select MULTI_IRQ_HANDLER |
e3e01091 | 763 | select PM_GENERIC_DOMAINS if PM |
0cdc8b92 | 764 | select NEED_MACH_MEMORY_H |
c793c1b0 | 765 | help |
6d72ad35 | 766 | Support for Renesas's SH-Mobile and R-Mobile ARM platforms. |
c793c1b0 | 767 | |
1da177e4 LT |
768 | config ARCH_RPC |
769 | bool "RiscPC" | |
770 | select ARCH_ACORN | |
771 | select FIQ | |
a08b6b79 | 772 | select ARCH_MAY_HAVE_PC_FDC |
341eb781 | 773 | select HAVE_PATA_PLATFORM |
065909b9 | 774 | select ISA_DMA_API |
5ea81769 | 775 | select NO_IOPORT |
07f841b7 | 776 | select ARCH_SPARSEMEM_ENABLE |
5cfc8ee0 | 777 | select ARCH_USES_GETTIMEOFFSET |
d0ee9f40 | 778 | select HAVE_IDE |
c334bc15 | 779 | select NEED_MACH_IO_H |
0cdc8b92 | 780 | select NEED_MACH_MEMORY_H |
1da177e4 LT |
781 | help |
782 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
783 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
784 | ||
785 | config ARCH_SA1100 | |
786 | bool "SA1100-based" | |
234b6ced | 787 | select CLKSRC_MMIO |
c750815e | 788 | select CPU_SA1100 |
f7e68bbf | 789 | select ISA |
05944d74 | 790 | select ARCH_SPARSEMEM_ENABLE |
034d2f5a | 791 | select ARCH_MTD_XIP |
89c52ed4 | 792 | select ARCH_HAS_CPUFREQ |
1937f5b9 | 793 | select CPU_FREQ |
3e238be2 | 794 | select GENERIC_CLOCKEVENTS |
4a8f8340 | 795 | select CLKDEV_LOOKUP |
7444a72e | 796 | select ARCH_REQUIRE_GPIOLIB |
d0ee9f40 | 797 | select HAVE_IDE |
0cdc8b92 | 798 | select NEED_MACH_MEMORY_H |
375dec92 | 799 | select SPARSE_IRQ |
f999b8bd MM |
800 | help |
801 | Support for StrongARM 11x0 based boards. | |
1da177e4 | 802 | |
b130d5c2 KK |
803 | config ARCH_S3C24XX |
804 | bool "Samsung S3C24XX SoCs" | |
0a938b97 | 805 | select GENERIC_GPIO |
9d56c02a | 806 | select ARCH_HAS_CPUFREQ |
9483a578 | 807 | select HAVE_CLK |
e83626f2 | 808 | select CLKDEV_LOOKUP |
5cfc8ee0 | 809 | select ARCH_USES_GETTIMEOFFSET |
20676c15 | 810 | select HAVE_S3C2410_I2C if I2C |
b130d5c2 KK |
811 | select HAVE_S3C_RTC if RTC_CLASS |
812 | select HAVE_S3C2410_WATCHDOG if WATCHDOG | |
c334bc15 | 813 | select NEED_MACH_IO_H |
1da177e4 | 814 | help |
b130d5c2 KK |
815 | Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 |
816 | and S3C2450 SoCs based systems, such as the Simtec Electronics BAST | |
817 | (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the | |
818 | Samsung SMDK2410 development board (and derivatives). | |
63b1f51b | 819 | |
a08ab637 BD |
820 | config ARCH_S3C64XX |
821 | bool "Samsung S3C64XX" | |
89f1fa08 | 822 | select PLAT_SAMSUNG |
89f0ce72 | 823 | select CPU_V6 |
89f0ce72 | 824 | select ARM_VIC |
a08ab637 | 825 | select HAVE_CLK |
6700397a | 826 | select HAVE_TCM |
226e85f4 | 827 | select CLKDEV_LOOKUP |
89f0ce72 | 828 | select NO_IOPORT |
5cfc8ee0 | 829 | select ARCH_USES_GETTIMEOFFSET |
89c52ed4 | 830 | select ARCH_HAS_CPUFREQ |
89f0ce72 BD |
831 | select ARCH_REQUIRE_GPIOLIB |
832 | select SAMSUNG_CLKSRC | |
833 | select SAMSUNG_IRQ_VIC_TIMER | |
89f0ce72 | 834 | select S3C_GPIO_TRACK |
89f0ce72 BD |
835 | select S3C_DEV_NAND |
836 | select USB_ARCH_HAS_OHCI | |
837 | select SAMSUNG_GPIOLIB_4BIT | |
20676c15 | 838 | select HAVE_S3C2410_I2C if I2C |
c39d8d55 | 839 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
a08ab637 BD |
840 | help |
841 | Samsung S3C64XX series based systems | |
842 | ||
49b7a491 KK |
843 | config ARCH_S5P64X0 |
844 | bool "Samsung S5P6440 S5P6450" | |
c4ffccdd KK |
845 | select CPU_V6 |
846 | select GENERIC_GPIO | |
847 | select HAVE_CLK | |
d8b22d25 | 848 | select CLKDEV_LOOKUP |
0665ccc4 | 849 | select CLKSRC_MMIO |
c39d8d55 | 850 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
9e65bbf2 | 851 | select GENERIC_CLOCKEVENTS |
20676c15 | 852 | select HAVE_S3C2410_I2C if I2C |
754961a8 | 853 | select HAVE_S3C_RTC if RTC_CLASS |
c4ffccdd | 854 | help |
49b7a491 KK |
855 | Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, |
856 | SMDK6450. | |
c4ffccdd | 857 | |
acc84707 MS |
858 | config ARCH_S5PC100 |
859 | bool "Samsung S5PC100" | |
5a7652f2 BM |
860 | select GENERIC_GPIO |
861 | select HAVE_CLK | |
29e8eb0f | 862 | select CLKDEV_LOOKUP |
5a7652f2 | 863 | select CPU_V7 |
925c68cd | 864 | select ARCH_USES_GETTIMEOFFSET |
20676c15 | 865 | select HAVE_S3C2410_I2C if I2C |
754961a8 | 866 | select HAVE_S3C_RTC if RTC_CLASS |
c39d8d55 | 867 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
5a7652f2 | 868 | help |
acc84707 | 869 | Samsung S5PC100 series based systems |
5a7652f2 | 870 | |
170f4e42 KK |
871 | config ARCH_S5PV210 |
872 | bool "Samsung S5PV210/S5PC110" | |
873 | select CPU_V7 | |
eecb6a84 | 874 | select ARCH_SPARSEMEM_ENABLE |
0f75a96b | 875 | select ARCH_HAS_HOLES_MEMORYMODEL |
170f4e42 KK |
876 | select GENERIC_GPIO |
877 | select HAVE_CLK | |
b2a9dd46 | 878 | select CLKDEV_LOOKUP |
0665ccc4 | 879 | select CLKSRC_MMIO |
d8144aea | 880 | select ARCH_HAS_CPUFREQ |
9e65bbf2 | 881 | select GENERIC_CLOCKEVENTS |
20676c15 | 882 | select HAVE_S3C2410_I2C if I2C |
754961a8 | 883 | select HAVE_S3C_RTC if RTC_CLASS |
c39d8d55 | 884 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
0cdc8b92 | 885 | select NEED_MACH_MEMORY_H |
170f4e42 KK |
886 | help |
887 | Samsung S5PV210/S5PC110 series based systems | |
888 | ||
83014579 KK |
889 | config ARCH_EXYNOS |
890 | bool "SAMSUNG EXYNOS" | |
cc0e72b8 | 891 | select CPU_V7 |
f567fa6f | 892 | select ARCH_SPARSEMEM_ENABLE |
0f75a96b | 893 | select ARCH_HAS_HOLES_MEMORYMODEL |
cc0e72b8 CY |
894 | select GENERIC_GPIO |
895 | select HAVE_CLK | |
badc4f2d | 896 | select CLKDEV_LOOKUP |
b333fb16 | 897 | select ARCH_HAS_CPUFREQ |
cc0e72b8 | 898 | select GENERIC_CLOCKEVENTS |
754961a8 | 899 | select HAVE_S3C_RTC if RTC_CLASS |
20676c15 | 900 | select HAVE_S3C2410_I2C if I2C |
c39d8d55 | 901 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
0cdc8b92 | 902 | select NEED_MACH_MEMORY_H |
cc0e72b8 | 903 | help |
83014579 | 904 | Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) |
cc0e72b8 | 905 | |
1da177e4 LT |
906 | config ARCH_SHARK |
907 | bool "Shark" | |
c750815e | 908 | select CPU_SA110 |
f7e68bbf RK |
909 | select ISA |
910 | select ISA_DMA | |
3bca103a | 911 | select ZONE_DMA |
f7e68bbf | 912 | select PCI |
5cfc8ee0 | 913 | select ARCH_USES_GETTIMEOFFSET |
0cdc8b92 | 914 | select NEED_MACH_MEMORY_H |
c334bc15 | 915 | select NEED_MACH_IO_H |
f999b8bd MM |
916 | help |
917 | Support for the StrongARM based Digital DNARD machine, also known | |
918 | as "Shark" (<http://www.shark-linux.de/shark.html>). | |
1da177e4 | 919 | |
d98aac75 LW |
920 | config ARCH_U300 |
921 | bool "ST-Ericsson U300 Series" | |
922 | depends on MMU | |
234b6ced | 923 | select CLKSRC_MMIO |
d98aac75 | 924 | select CPU_ARM926T |
bc581770 | 925 | select HAVE_TCM |
d98aac75 | 926 | select ARM_AMBA |
5485c1e0 | 927 | select ARM_PATCH_PHYS_VIRT |
d98aac75 | 928 | select ARM_VIC |
d98aac75 | 929 | select GENERIC_CLOCKEVENTS |
6d803ba7 | 930 | select CLKDEV_LOOKUP |
50667d63 | 931 | select COMMON_CLK |
d98aac75 | 932 | select GENERIC_GPIO |
cc890cd7 | 933 | select ARCH_REQUIRE_GPIOLIB |
d98aac75 LW |
934 | help |
935 | Support for ST-Ericsson U300 series mobile platforms. | |
936 | ||
ccf50e23 RK |
937 | config ARCH_U8500 |
938 | bool "ST-Ericsson U8500 Series" | |
67ae14fc | 939 | depends on MMU |
ccf50e23 RK |
940 | select CPU_V7 |
941 | select ARM_AMBA | |
ccf50e23 | 942 | select GENERIC_CLOCKEVENTS |
6d803ba7 | 943 | select CLKDEV_LOOKUP |
94bdc0e2 | 944 | select ARCH_REQUIRE_GPIOLIB |
7c1a70e9 | 945 | select ARCH_HAS_CPUFREQ |
3b55658a | 946 | select HAVE_SMP |
ce5ea9f3 | 947 | select MIGHT_HAVE_CACHE_L2X0 |
ccf50e23 RK |
948 | help |
949 | Support for ST-Ericsson's Ux500 architecture | |
950 | ||
951 | config ARCH_NOMADIK | |
952 | bool "STMicroelectronics Nomadik" | |
953 | select ARM_AMBA | |
954 | select ARM_VIC | |
955 | select CPU_ARM926T | |
4a31bd28 | 956 | select COMMON_CLK |
ccf50e23 | 957 | select GENERIC_CLOCKEVENTS |
0fa7be40 | 958 | select PINCTRL |
ce5ea9f3 | 959 | select MIGHT_HAVE_CACHE_L2X0 |
ccf50e23 RK |
960 | select ARCH_REQUIRE_GPIOLIB |
961 | help | |
962 | Support for the Nomadik platform by ST-Ericsson | |
963 | ||
7c6337e2 KH |
964 | config ARCH_DAVINCI |
965 | bool "TI DaVinci" | |
7c6337e2 | 966 | select GENERIC_CLOCKEVENTS |
dce1115b | 967 | select ARCH_REQUIRE_GPIOLIB |
3bca103a | 968 | select ZONE_DMA |
9232fcc9 | 969 | select HAVE_IDE |
6d803ba7 | 970 | select CLKDEV_LOOKUP |
20e9969b | 971 | select GENERIC_ALLOCATOR |
dc7ad3b3 | 972 | select GENERIC_IRQ_CHIP |
ae88e05a | 973 | select ARCH_HAS_HOLES_MEMORYMODEL |
7c6337e2 KH |
974 | help |
975 | Support for TI's DaVinci platform. | |
976 | ||
3b938be6 RK |
977 | config ARCH_OMAP |
978 | bool "TI OMAP" | |
00a36698 | 979 | depends on MMU |
9483a578 | 980 | select HAVE_CLK |
7444a72e | 981 | select ARCH_REQUIRE_GPIOLIB |
89c52ed4 | 982 | select ARCH_HAS_CPUFREQ |
354a183f | 983 | select CLKSRC_MMIO |
06cad098 | 984 | select GENERIC_CLOCKEVENTS |
9af915da | 985 | select ARCH_HAS_HOLES_MEMORYMODEL |
3b938be6 | 986 | help |
6e457bb0 | 987 | Support for TI's OMAP platform (OMAP1/2/3/4). |
3b938be6 | 988 | |
cee37e50 VK |
989 | config PLAT_SPEAR |
990 | bool "ST SPEAr" | |
991 | select ARM_AMBA | |
992 | select ARCH_REQUIRE_GPIOLIB | |
6d803ba7 | 993 | select CLKDEV_LOOKUP |
5df33a62 | 994 | select COMMON_CLK |
d6e15d78 | 995 | select CLKSRC_MMIO |
cee37e50 | 996 | select GENERIC_CLOCKEVENTS |
cee37e50 VK |
997 | select HAVE_CLK |
998 | help | |
999 | Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). | |
1000 | ||
21f47fbc AC |
1001 | config ARCH_VT8500 |
1002 | bool "VIA/WonderMedia 85xx" | |
1003 | select CPU_ARM926T | |
1004 | select GENERIC_GPIO | |
1005 | select ARCH_HAS_CPUFREQ | |
1006 | select GENERIC_CLOCKEVENTS | |
1007 | select ARCH_REQUIRE_GPIOLIB | |
21f47fbc AC |
1008 | help |
1009 | Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. | |
02c981c0 | 1010 | |
b85a3ef4 JL |
1011 | config ARCH_ZYNQ |
1012 | bool "Xilinx Zynq ARM Cortex A9 Platform" | |
02c981c0 | 1013 | select CPU_V7 |
02c981c0 BD |
1014 | select GENERIC_CLOCKEVENTS |
1015 | select CLKDEV_LOOKUP | |
b85a3ef4 JL |
1016 | select ARM_GIC |
1017 | select ARM_AMBA | |
1018 | select ICST | |
ce5ea9f3 | 1019 | select MIGHT_HAVE_CACHE_L2X0 |
02c981c0 | 1020 | select USE_OF |
02c981c0 | 1021 | help |
b85a3ef4 | 1022 | Support for Xilinx Zynq ARM Cortex A9 Platform |
1da177e4 LT |
1023 | endchoice |
1024 | ||
ccf50e23 RK |
1025 | # |
1026 | # This is sorted alphabetically by mach-* pathname. However, plat-* | |
1027 | # Kconfigs may be included either alphabetically (according to the | |
1028 | # plat- suffix) or along side the corresponding mach-* source. | |
1029 | # | |
3e93a22b GC |
1030 | source "arch/arm/mach-mvebu/Kconfig" |
1031 | ||
95b8f20f RK |
1032 | source "arch/arm/mach-at91/Kconfig" |
1033 | ||
1034 | source "arch/arm/mach-bcmring/Kconfig" | |
1035 | ||
1da177e4 LT |
1036 | source "arch/arm/mach-clps711x/Kconfig" |
1037 | ||
d94f944e AV |
1038 | source "arch/arm/mach-cns3xxx/Kconfig" |
1039 | ||
95b8f20f RK |
1040 | source "arch/arm/mach-davinci/Kconfig" |
1041 | ||
1042 | source "arch/arm/mach-dove/Kconfig" | |
1043 | ||
e7736d47 LB |
1044 | source "arch/arm/mach-ep93xx/Kconfig" |
1045 | ||
1da177e4 LT |
1046 | source "arch/arm/mach-footbridge/Kconfig" |
1047 | ||
59d3a193 PZ |
1048 | source "arch/arm/mach-gemini/Kconfig" |
1049 | ||
95b8f20f RK |
1050 | source "arch/arm/mach-h720x/Kconfig" |
1051 | ||
1da177e4 LT |
1052 | source "arch/arm/mach-integrator/Kconfig" |
1053 | ||
3f7e5815 LB |
1054 | source "arch/arm/mach-iop32x/Kconfig" |
1055 | ||
1056 | source "arch/arm/mach-iop33x/Kconfig" | |
1da177e4 | 1057 | |
285f5fa7 DW |
1058 | source "arch/arm/mach-iop13xx/Kconfig" |
1059 | ||
1da177e4 LT |
1060 | source "arch/arm/mach-ixp4xx/Kconfig" |
1061 | ||
95b8f20f RK |
1062 | source "arch/arm/mach-kirkwood/Kconfig" |
1063 | ||
1064 | source "arch/arm/mach-ks8695/Kconfig" | |
1065 | ||
95b8f20f RK |
1066 | source "arch/arm/mach-msm/Kconfig" |
1067 | ||
794d15b2 SS |
1068 | source "arch/arm/mach-mv78xx0/Kconfig" |
1069 | ||
95b8f20f | 1070 | source "arch/arm/plat-mxc/Kconfig" |
1da177e4 | 1071 | |
1d3f33d5 SG |
1072 | source "arch/arm/mach-mxs/Kconfig" |
1073 | ||
95b8f20f | 1074 | source "arch/arm/mach-netx/Kconfig" |
49cbe786 | 1075 | |
95b8f20f RK |
1076 | source "arch/arm/mach-nomadik/Kconfig" |
1077 | source "arch/arm/plat-nomadik/Kconfig" | |
1078 | ||
d48af15e TL |
1079 | source "arch/arm/plat-omap/Kconfig" |
1080 | ||
1081 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 1082 | |
1dbae815 TL |
1083 | source "arch/arm/mach-omap2/Kconfig" |
1084 | ||
9dd0b194 | 1085 | source "arch/arm/mach-orion5x/Kconfig" |
585cf175 | 1086 | |
95b8f20f RK |
1087 | source "arch/arm/mach-pxa/Kconfig" |
1088 | source "arch/arm/plat-pxa/Kconfig" | |
585cf175 | 1089 | |
95b8f20f RK |
1090 | source "arch/arm/mach-mmp/Kconfig" |
1091 | ||
1092 | source "arch/arm/mach-realview/Kconfig" | |
1093 | ||
1094 | source "arch/arm/mach-sa1100/Kconfig" | |
edabd38e | 1095 | |
cf383678 | 1096 | source "arch/arm/plat-samsung/Kconfig" |
a21765a7 BD |
1097 | source "arch/arm/plat-s3c24xx/Kconfig" |
1098 | ||
cee37e50 | 1099 | source "arch/arm/plat-spear/Kconfig" |
a21765a7 | 1100 | |
85fd6d63 | 1101 | source "arch/arm/mach-s3c24xx/Kconfig" |
b130d5c2 | 1102 | if ARCH_S3C24XX |
a21765a7 BD |
1103 | source "arch/arm/mach-s3c2412/Kconfig" |
1104 | source "arch/arm/mach-s3c2440/Kconfig" | |
a21765a7 | 1105 | endif |
1da177e4 | 1106 | |
a08ab637 | 1107 | if ARCH_S3C64XX |
431107ea | 1108 | source "arch/arm/mach-s3c64xx/Kconfig" |
a08ab637 BD |
1109 | endif |
1110 | ||
49b7a491 | 1111 | source "arch/arm/mach-s5p64x0/Kconfig" |
c4ffccdd | 1112 | |
5a7652f2 | 1113 | source "arch/arm/mach-s5pc100/Kconfig" |
5a7652f2 | 1114 | |
170f4e42 KK |
1115 | source "arch/arm/mach-s5pv210/Kconfig" |
1116 | ||
83014579 | 1117 | source "arch/arm/mach-exynos/Kconfig" |
cc0e72b8 | 1118 | |
882d01f9 | 1119 | source "arch/arm/mach-shmobile/Kconfig" |
52c543f9 | 1120 | |
c5f80065 EG |
1121 | source "arch/arm/mach-tegra/Kconfig" |
1122 | ||
95b8f20f | 1123 | source "arch/arm/mach-u300/Kconfig" |
1da177e4 | 1124 | |
95b8f20f | 1125 | source "arch/arm/mach-ux500/Kconfig" |
1da177e4 LT |
1126 | |
1127 | source "arch/arm/mach-versatile/Kconfig" | |
1128 | ||
ceade897 | 1129 | source "arch/arm/mach-vexpress/Kconfig" |
420c34e4 | 1130 | source "arch/arm/plat-versatile/Kconfig" |
ceade897 | 1131 | |
21f47fbc AC |
1132 | source "arch/arm/mach-vt8500/Kconfig" |
1133 | ||
7ec80ddf | 1134 | source "arch/arm/mach-w90x900/Kconfig" |
1135 | ||
1da177e4 LT |
1136 | # Definitions to make life easier |
1137 | config ARCH_ACORN | |
1138 | bool | |
1139 | ||
7ae1f7ec LB |
1140 | config PLAT_IOP |
1141 | bool | |
469d3044 | 1142 | select GENERIC_CLOCKEVENTS |
7ae1f7ec | 1143 | |
69b02f6a LB |
1144 | config PLAT_ORION |
1145 | bool | |
bfe45e0b | 1146 | select CLKSRC_MMIO |
dc7ad3b3 | 1147 | select GENERIC_IRQ_CHIP |
278b45b0 | 1148 | select IRQ_DOMAIN |
2f129bf4 | 1149 | select COMMON_CLK |
69b02f6a | 1150 | |
bd5ce433 EM |
1151 | config PLAT_PXA |
1152 | bool | |
1153 | ||
f4b8b319 RK |
1154 | config PLAT_VERSATILE |
1155 | bool | |
1156 | ||
e3887714 RK |
1157 | config ARM_TIMER_SP804 |
1158 | bool | |
bfe45e0b | 1159 | select CLKSRC_MMIO |
a7bf6162 | 1160 | select HAVE_SCHED_CLOCK |
e3887714 | 1161 | |
1da177e4 LT |
1162 | source arch/arm/mm/Kconfig |
1163 | ||
958cab0f RK |
1164 | config ARM_NR_BANKS |
1165 | int | |
1166 | default 16 if ARCH_EP93XX | |
1167 | default 8 | |
1168 | ||
afe4b25e LB |
1169 | config IWMMXT |
1170 | bool "Enable iWMMXt support" | |
ef6c8445 HZ |
1171 | depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 |
1172 | default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP | |
afe4b25e LB |
1173 | help |
1174 | Enable support for iWMMXt context switching at run time if | |
1175 | running on a CPU that supports it. | |
1176 | ||
1da177e4 LT |
1177 | config XSCALE_PMU |
1178 | bool | |
bfc994b5 | 1179 | depends on CPU_XSCALE |
1da177e4 LT |
1180 | default y |
1181 | ||
0f4f0672 | 1182 | config CPU_HAS_PMU |
e399b1a4 | 1183 | depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \ |
8954bb0d | 1184 | (!ARCH_OMAP3 || OMAP3_EMU) |
0f4f0672 JI |
1185 | default y |
1186 | bool | |
1187 | ||
52108641 | 1188 | config MULTI_IRQ_HANDLER |
1189 | bool | |
1190 | help | |
1191 | Allow each machine to specify it's own IRQ handler at run time. | |
1192 | ||
3b93e7b0 HC |
1193 | if !MMU |
1194 | source "arch/arm/Kconfig-nommu" | |
1195 | endif | |
1196 | ||
f0c4b8d6 WD |
1197 | config ARM_ERRATA_326103 |
1198 | bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" | |
1199 | depends on CPU_V6 | |
1200 | help | |
1201 | Executing a SWP instruction to read-only memory does not set bit 11 | |
1202 | of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to | |
1203 | treat the access as a read, preventing a COW from occurring and | |
1204 | causing the faulting task to livelock. | |
1205 | ||
9cba3ccc CM |
1206 | config ARM_ERRATA_411920 |
1207 | bool "ARM errata: Invalidation of the Instruction Cache operation can fail" | |
e399b1a4 | 1208 | depends on CPU_V6 || CPU_V6K |
9cba3ccc CM |
1209 | help |
1210 | Invalidation of the Instruction Cache operation can | |
1211 | fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. | |
1212 | It does not affect the MPCore. This option enables the ARM Ltd. | |
1213 | recommended workaround. | |
1214 | ||
7ce236fc CM |
1215 | config ARM_ERRATA_430973 |
1216 | bool "ARM errata: Stale prediction on replaced interworking branch" | |
1217 | depends on CPU_V7 | |
1218 | help | |
1219 | This option enables the workaround for the 430973 Cortex-A8 | |
1220 | (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb | |
1221 | interworking branch is replaced with another code sequence at the | |
1222 | same virtual address, whether due to self-modifying code or virtual | |
1223 | to physical address re-mapping, Cortex-A8 does not recover from the | |
1224 | stale interworking branch prediction. This results in Cortex-A8 | |
1225 | executing the new code sequence in the incorrect ARM or Thumb state. | |
1226 | The workaround enables the BTB/BTAC operations by setting ACTLR.IBE | |
1227 | and also flushes the branch target cache at every context switch. | |
1228 | Note that setting specific bits in the ACTLR register may not be | |
1229 | available in non-secure mode. | |
1230 | ||
855c551f CM |
1231 | config ARM_ERRATA_458693 |
1232 | bool "ARM errata: Processor deadlock when a false hazard is created" | |
1233 | depends on CPU_V7 | |
1234 | help | |
1235 | This option enables the workaround for the 458693 Cortex-A8 (r2p0) | |
1236 | erratum. For very specific sequences of memory operations, it is | |
1237 | possible for a hazard condition intended for a cache line to instead | |
1238 | be incorrectly associated with a different cache line. This false | |
1239 | hazard might then cause a processor deadlock. The workaround enables | |
1240 | the L1 caching of the NEON accesses and disables the PLD instruction | |
1241 | in the ACTLR register. Note that setting specific bits in the ACTLR | |
1242 | register may not be available in non-secure mode. | |
1243 | ||
0516e464 CM |
1244 | config ARM_ERRATA_460075 |
1245 | bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" | |
1246 | depends on CPU_V7 | |
1247 | help | |
1248 | This option enables the workaround for the 460075 Cortex-A8 (r2p0) | |
1249 | erratum. Any asynchronous access to the L2 cache may encounter a | |
1250 | situation in which recent store transactions to the L2 cache are lost | |
1251 | and overwritten with stale memory contents from external memory. The | |
1252 | workaround disables the write-allocate mode for the L2 cache via the | |
1253 | ACTLR register. Note that setting specific bits in the ACTLR register | |
1254 | may not be available in non-secure mode. | |
1255 | ||
9f05027c WD |
1256 | config ARM_ERRATA_742230 |
1257 | bool "ARM errata: DMB operation may be faulty" | |
1258 | depends on CPU_V7 && SMP | |
1259 | help | |
1260 | This option enables the workaround for the 742230 Cortex-A9 | |
1261 | (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction | |
1262 | between two write operations may not ensure the correct visibility | |
1263 | ordering of the two writes. This workaround sets a specific bit in | |
1264 | the diagnostic register of the Cortex-A9 which causes the DMB | |
1265 | instruction to behave as a DSB, ensuring the correct behaviour of | |
1266 | the two writes. | |
1267 | ||
a672e99b WD |
1268 | config ARM_ERRATA_742231 |
1269 | bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" | |
1270 | depends on CPU_V7 && SMP | |
1271 | help | |
1272 | This option enables the workaround for the 742231 Cortex-A9 | |
1273 | (r2p0..r2p2) erratum. Under certain conditions, specific to the | |
1274 | Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, | |
1275 | accessing some data located in the same cache line, may get corrupted | |
1276 | data due to bad handling of the address hazard when the line gets | |
1277 | replaced from one of the CPUs at the same time as another CPU is | |
1278 | accessing it. This workaround sets specific bits in the diagnostic | |
1279 | register of the Cortex-A9 which reduces the linefill issuing | |
1280 | capabilities of the processor. | |
1281 | ||
9e65582a | 1282 | config PL310_ERRATA_588369 |
fa0ce403 | 1283 | bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" |
2839e06c | 1284 | depends on CACHE_L2X0 |
9e65582a SS |
1285 | help |
1286 | The PL310 L2 cache controller implements three types of Clean & | |
1287 | Invalidate maintenance operations: by Physical Address | |
1288 | (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). | |
1289 | They are architecturally defined to behave as the execution of a | |
1290 | clean operation followed immediately by an invalidate operation, | |
1291 | both performing to the same memory location. This functionality | |
1292 | is not correctly implemented in PL310 as clean lines are not | |
2839e06c | 1293 | invalidated as a result of these operations. |
cdf357f1 WD |
1294 | |
1295 | config ARM_ERRATA_720789 | |
1296 | bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" | |
e66dc745 | 1297 | depends on CPU_V7 |
cdf357f1 WD |
1298 | help |
1299 | This option enables the workaround for the 720789 Cortex-A9 (prior to | |
1300 | r2p0) erratum. A faulty ASID can be sent to the other CPUs for the | |
1301 | broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. | |
1302 | As a consequence of this erratum, some TLB entries which should be | |
1303 | invalidated are not, resulting in an incoherency in the system page | |
1304 | tables. The workaround changes the TLB flushing routines to invalidate | |
1305 | entries regardless of the ASID. | |
475d92fc | 1306 | |
1f0090a1 | 1307 | config PL310_ERRATA_727915 |
fa0ce403 | 1308 | bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" |
1f0090a1 RK |
1309 | depends on CACHE_L2X0 |
1310 | help | |
1311 | PL310 implements the Clean & Invalidate by Way L2 cache maintenance | |
1312 | operation (offset 0x7FC). This operation runs in background so that | |
1313 | PL310 can handle normal accesses while it is in progress. Under very | |
1314 | rare circumstances, due to this erratum, write data can be lost when | |
1315 | PL310 treats a cacheable write transaction during a Clean & | |
1316 | Invalidate by Way operation. | |
1317 | ||
475d92fc WD |
1318 | config ARM_ERRATA_743622 |
1319 | bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" | |
1320 | depends on CPU_V7 | |
1321 | help | |
1322 | This option enables the workaround for the 743622 Cortex-A9 | |
efbc74ac | 1323 | (r2p*) erratum. Under very rare conditions, a faulty |
475d92fc WD |
1324 | optimisation in the Cortex-A9 Store Buffer may lead to data |
1325 | corruption. This workaround sets a specific bit in the diagnostic | |
1326 | register of the Cortex-A9 which disables the Store Buffer | |
1327 | optimisation, preventing the defect from occurring. This has no | |
1328 | visible impact on the overall performance or power consumption of the | |
1329 | processor. | |
1330 | ||
9a27c27c WD |
1331 | config ARM_ERRATA_751472 |
1332 | bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" | |
ba90c516 | 1333 | depends on CPU_V7 |
9a27c27c WD |
1334 | help |
1335 | This option enables the workaround for the 751472 Cortex-A9 (prior | |
1336 | to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the | |
1337 | completion of a following broadcasted operation if the second | |
1338 | operation is received by a CPU before the ICIALLUIS has completed, | |
1339 | potentially leading to corrupted entries in the cache or TLB. | |
1340 | ||
fa0ce403 WD |
1341 | config PL310_ERRATA_753970 |
1342 | bool "PL310 errata: cache sync operation may be faulty" | |
885028e4 SK |
1343 | depends on CACHE_PL310 |
1344 | help | |
1345 | This option enables the workaround for the 753970 PL310 (r3p0) erratum. | |
1346 | ||
1347 | Under some condition the effect of cache sync operation on | |
1348 | the store buffer still remains when the operation completes. | |
1349 | This means that the store buffer is always asked to drain and | |
1350 | this prevents it from merging any further writes. The workaround | |
1351 | is to replace the normal offset of cache sync operation (0x730) | |
1352 | by another offset targeting an unmapped PL310 register 0x740. | |
1353 | This has the same effect as the cache sync operation: store buffer | |
1354 | drain and waiting for all buffers empty. | |
1355 | ||
fcbdc5fe WD |
1356 | config ARM_ERRATA_754322 |
1357 | bool "ARM errata: possible faulty MMU translations following an ASID switch" | |
1358 | depends on CPU_V7 | |
1359 | help | |
1360 | This option enables the workaround for the 754322 Cortex-A9 (r2p*, | |
1361 | r3p*) erratum. A speculative memory access may cause a page table walk | |
1362 | which starts prior to an ASID switch but completes afterwards. This | |
1363 | can populate the micro-TLB with a stale entry which may be hit with | |
1364 | the new ASID. This workaround places two dsb instructions in the mm | |
1365 | switching code so that no page table walks can cross the ASID switch. | |
1366 | ||
5dab26af WD |
1367 | config ARM_ERRATA_754327 |
1368 | bool "ARM errata: no automatic Store Buffer drain" | |
1369 | depends on CPU_V7 && SMP | |
1370 | help | |
1371 | This option enables the workaround for the 754327 Cortex-A9 (prior to | |
1372 | r2p0) erratum. The Store Buffer does not have any automatic draining | |
1373 | mechanism and therefore a livelock may occur if an external agent | |
1374 | continuously polls a memory location waiting to observe an update. | |
1375 | This workaround defines cpu_relax() as smp_mb(), preventing correctly | |
1376 | written polling loops from denying visibility of updates to memory. | |
1377 | ||
145e10e1 CM |
1378 | config ARM_ERRATA_364296 |
1379 | bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" | |
1380 | depends on CPU_V6 && !SMP | |
1381 | help | |
1382 | This options enables the workaround for the 364296 ARM1136 | |
1383 | r0p2 erratum (possible cache data corruption with | |
1384 | hit-under-miss enabled). It sets the undocumented bit 31 in | |
1385 | the auxiliary control register and the FI bit in the control | |
1386 | register, thus disabling hit-under-miss without putting the | |
1387 | processor into full low interrupt latency mode. ARM11MPCore | |
1388 | is not affected. | |
1389 | ||
f630c1bd WD |
1390 | config ARM_ERRATA_764369 |
1391 | bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" | |
1392 | depends on CPU_V7 && SMP | |
1393 | help | |
1394 | This option enables the workaround for erratum 764369 | |
1395 | affecting Cortex-A9 MPCore with two or more processors (all | |
1396 | current revisions). Under certain timing circumstances, a data | |
1397 | cache line maintenance operation by MVA targeting an Inner | |
1398 | Shareable memory region may fail to proceed up to either the | |
1399 | Point of Coherency or to the Point of Unification of the | |
1400 | system. This workaround adds a DSB instruction before the | |
1401 | relevant cache maintenance functions and sets a specific bit | |
1402 | in the diagnostic control register of the SCU. | |
1403 | ||
11ed0ba1 WD |
1404 | config PL310_ERRATA_769419 |
1405 | bool "PL310 errata: no automatic Store Buffer drain" | |
1406 | depends on CACHE_L2X0 | |
1407 | help | |
1408 | On revisions of the PL310 prior to r3p2, the Store Buffer does | |
1409 | not automatically drain. This can cause normal, non-cacheable | |
1410 | writes to be retained when the memory system is idle, leading | |
1411 | to suboptimal I/O performance for drivers using coherent DMA. | |
1412 | This option adds a write barrier to the cpu_idle loop so that, | |
1413 | on systems with an outer cache, the store buffer is drained | |
1414 | explicitly. | |
1415 | ||
1da177e4 LT |
1416 | endmenu |
1417 | ||
1418 | source "arch/arm/common/Kconfig" | |
1419 | ||
1da177e4 LT |
1420 | menu "Bus support" |
1421 | ||
1422 | config ARM_AMBA | |
1423 | bool | |
1424 | ||
1425 | config ISA | |
1426 | bool | |
1da177e4 LT |
1427 | help |
1428 | Find out whether you have ISA slots on your motherboard. ISA is the | |
1429 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
1430 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
1431 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
1432 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
1433 | ||
065909b9 | 1434 | # Select ISA DMA controller support |
1da177e4 LT |
1435 | config ISA_DMA |
1436 | bool | |
065909b9 | 1437 | select ISA_DMA_API |
1da177e4 | 1438 | |
065909b9 | 1439 | # Select ISA DMA interface |
5cae841b AV |
1440 | config ISA_DMA_API |
1441 | bool | |
5cae841b | 1442 | |
1da177e4 | 1443 | config PCI |
0b05da72 | 1444 | bool "PCI support" if MIGHT_HAVE_PCI |
1da177e4 LT |
1445 | help |
1446 | Find out whether you have a PCI motherboard. PCI is the name of a | |
1447 | bus system, i.e. the way the CPU talks to the other stuff inside | |
1448 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
1449 | VESA. If you have PCI, say Y, otherwise N. | |
1450 | ||
52882173 AV |
1451 | config PCI_DOMAINS |
1452 | bool | |
1453 | depends on PCI | |
1454 | ||
b080ac8a MRJ |
1455 | config PCI_NANOENGINE |
1456 | bool "BSE nanoEngine PCI support" | |
1457 | depends on SA1100_NANOENGINE | |
1458 | help | |
1459 | Enable PCI on the BSE nanoEngine board. | |
1460 | ||
36e23590 MW |
1461 | config PCI_SYSCALL |
1462 | def_bool PCI | |
1463 | ||
1da177e4 LT |
1464 | # Select the host bridge type |
1465 | config PCI_HOST_VIA82C505 | |
1466 | bool | |
1467 | depends on PCI && ARCH_SHARK | |
1468 | default y | |
1469 | ||
a0113a99 MR |
1470 | config PCI_HOST_ITE8152 |
1471 | bool | |
1472 | depends on PCI && MACH_ARMCORE | |
1473 | default y | |
1474 | select DMABOUNCE | |
1475 | ||
1da177e4 LT |
1476 | source "drivers/pci/Kconfig" |
1477 | ||
1478 | source "drivers/pcmcia/Kconfig" | |
1479 | ||
1480 | endmenu | |
1481 | ||
1482 | menu "Kernel Features" | |
1483 | ||
3b55658a DM |
1484 | config HAVE_SMP |
1485 | bool | |
1486 | help | |
1487 | This option should be selected by machines which have an SMP- | |
1488 | capable CPU. | |
1489 | ||
1490 | The only effect of this option is to make the SMP-related | |
1491 | options available to the user for configuration. | |
1492 | ||
1da177e4 | 1493 | config SMP |
bb2d8130 | 1494 | bool "Symmetric Multi-Processing" |
fbb4ddac | 1495 | depends on CPU_V6K || CPU_V7 |
bc28248e | 1496 | depends on GENERIC_CLOCKEVENTS |
3b55658a | 1497 | depends on HAVE_SMP |
9934ebb8 | 1498 | depends on MMU |
f6dd9fa5 | 1499 | select USE_GENERIC_SMP_HELPERS |
89c3dedf | 1500 | select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP |
1da177e4 LT |
1501 | help |
1502 | This enables support for systems with more than one CPU. If you have | |
1503 | a system with only one CPU, like most personal computers, say N. If | |
1504 | you have a system with more than one CPU, say Y. | |
1505 | ||
1506 | If you say N here, the kernel will run on single and multiprocessor | |
1507 | machines, but will use only one CPU of a multiprocessor machine. If | |
1508 | you say Y here, the kernel will run on many, but not all, single | |
1509 | processor machines. On a single processor machine, the kernel will | |
1510 | run faster if you say N here. | |
1511 | ||
395cf969 | 1512 | See also <file:Documentation/x86/i386/IO-APIC.txt>, |
1da177e4 | 1513 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
50a23e6e | 1514 | <http://tldp.org/HOWTO/SMP-HOWTO.html>. |
1da177e4 LT |
1515 | |
1516 | If you don't know what to do here, say N. | |
1517 | ||
f00ec48f RK |
1518 | config SMP_ON_UP |
1519 | bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" | |
1520 | depends on EXPERIMENTAL | |
4d2692a7 | 1521 | depends on SMP && !XIP_KERNEL |
f00ec48f RK |
1522 | default y |
1523 | help | |
1524 | SMP kernels contain instructions which fail on non-SMP processors. | |
1525 | Enabling this option allows the kernel to modify itself to make | |
1526 | these instructions safe. Disabling it allows about 1K of space | |
1527 | savings. | |
1528 | ||
1529 | If you don't know what to do here, say Y. | |
1530 | ||
c9018aab VG |
1531 | config ARM_CPU_TOPOLOGY |
1532 | bool "Support cpu topology definition" | |
1533 | depends on SMP && CPU_V7 | |
1534 | default y | |
1535 | help | |
1536 | Support ARM cpu topology definition. The MPIDR register defines | |
1537 | affinity between processors which is then used to describe the cpu | |
1538 | topology of an ARM System. | |
1539 | ||
1540 | config SCHED_MC | |
1541 | bool "Multi-core scheduler support" | |
1542 | depends on ARM_CPU_TOPOLOGY | |
1543 | help | |
1544 | Multi-core scheduler support improves the CPU scheduler's decision | |
1545 | making when dealing with multi-core CPU chips at a cost of slightly | |
1546 | increased overhead in some places. If unsure say N here. | |
1547 | ||
1548 | config SCHED_SMT | |
1549 | bool "SMT scheduler support" | |
1550 | depends on ARM_CPU_TOPOLOGY | |
1551 | help | |
1552 | Improves the CPU scheduler's decision making when dealing with | |
1553 | MultiThreading at a cost of slightly increased overhead in some | |
1554 | places. If unsure say N here. | |
1555 | ||
a8cbcd92 RK |
1556 | config HAVE_ARM_SCU |
1557 | bool | |
a8cbcd92 RK |
1558 | help |
1559 | This option enables support for the ARM system coherency unit | |
1560 | ||
022c03a2 MZ |
1561 | config ARM_ARCH_TIMER |
1562 | bool "Architected timer support" | |
1563 | depends on CPU_V7 | |
1564 | help | |
1565 | This option enables support for the ARM architected timer | |
1566 | ||
f32f4ce2 RK |
1567 | config HAVE_ARM_TWD |
1568 | bool | |
1569 | depends on SMP | |
1570 | help | |
1571 | This options enables support for the ARM timer and watchdog unit | |
1572 | ||
8d5796d2 LB |
1573 | choice |
1574 | prompt "Memory split" | |
1575 | default VMSPLIT_3G | |
1576 | help | |
1577 | Select the desired split between kernel and user memory. | |
1578 | ||
1579 | If you are not absolutely sure what you are doing, leave this | |
1580 | option alone! | |
1581 | ||
1582 | config VMSPLIT_3G | |
1583 | bool "3G/1G user/kernel split" | |
1584 | config VMSPLIT_2G | |
1585 | bool "2G/2G user/kernel split" | |
1586 | config VMSPLIT_1G | |
1587 | bool "1G/3G user/kernel split" | |
1588 | endchoice | |
1589 | ||
1590 | config PAGE_OFFSET | |
1591 | hex | |
1592 | default 0x40000000 if VMSPLIT_1G | |
1593 | default 0x80000000 if VMSPLIT_2G | |
1594 | default 0xC0000000 | |
1595 | ||
1da177e4 LT |
1596 | config NR_CPUS |
1597 | int "Maximum number of CPUs (2-32)" | |
1598 | range 2 32 | |
1599 | depends on SMP | |
1600 | default "4" | |
1601 | ||
a054a811 RK |
1602 | config HOTPLUG_CPU |
1603 | bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" | |
1604 | depends on SMP && HOTPLUG && EXPERIMENTAL | |
1605 | help | |
1606 | Say Y here to experiment with turning CPUs off and on. CPUs | |
1607 | can be controlled through /sys/devices/system/cpu. | |
1608 | ||
37ee16ae RK |
1609 | config LOCAL_TIMERS |
1610 | bool "Use local timer interrupts" | |
971acb9b | 1611 | depends on SMP |
37ee16ae | 1612 | default y |
30d8bead | 1613 | select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT) |
37ee16ae RK |
1614 | help |
1615 | Enable support for local timers on SMP platforms, rather then the | |
1616 | legacy IPI broadcast method. Local timers allows the system | |
1617 | accounting to be spread across the timer interval, preventing a | |
1618 | "thundering herd" at every timer tick. | |
1619 | ||
44986ab0 PDSN |
1620 | config ARCH_NR_GPIO |
1621 | int | |
3dea19e8 | 1622 | default 1024 if ARCH_SHMOBILE || ARCH_TEGRA |
70227a45 | 1623 | default 355 if ARCH_U8500 |
9a01ec30 | 1624 | default 264 if MACH_H4700 |
39f47d9f | 1625 | default 512 if SOC_OMAP5 |
44986ab0 PDSN |
1626 | default 0 |
1627 | help | |
1628 | Maximum number of GPIOs in the system. | |
1629 | ||
1630 | If unsure, leave the default value. | |
1631 | ||
d45a398f | 1632 | source kernel/Kconfig.preempt |
1da177e4 | 1633 | |
f8065813 RK |
1634 | config HZ |
1635 | int | |
b130d5c2 | 1636 | default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ |
a73ddc61 | 1637 | ARCH_S5PV210 || ARCH_EXYNOS4 |
bfe65704 | 1638 | default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER |
5248c657 | 1639 | default AT91_TIMER_HZ if ARCH_AT91 |
5da3e714 | 1640 | default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE |
f8065813 RK |
1641 | default 100 |
1642 | ||
16c79651 | 1643 | config THUMB2_KERNEL |
4a50bfe3 | 1644 | bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" |
e399b1a4 | 1645 | depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL |
16c79651 CM |
1646 | select AEABI |
1647 | select ARM_ASM_UNIFIED | |
89bace65 | 1648 | select ARM_UNWIND |
16c79651 CM |
1649 | help |
1650 | By enabling this option, the kernel will be compiled in | |
1651 | Thumb-2 mode. A compiler/assembler that understand the unified | |
1652 | ARM-Thumb syntax is needed. | |
1653 | ||
1654 | If unsure, say N. | |
1655 | ||
6f685c5c DM |
1656 | config THUMB2_AVOID_R_ARM_THM_JUMP11 |
1657 | bool "Work around buggy Thumb-2 short branch relocations in gas" | |
1658 | depends on THUMB2_KERNEL && MODULES | |
1659 | default y | |
1660 | help | |
1661 | Various binutils versions can resolve Thumb-2 branches to | |
1662 | locally-defined, preemptible global symbols as short-range "b.n" | |
1663 | branch instructions. | |
1664 | ||
1665 | This is a problem, because there's no guarantee the final | |
1666 | destination of the symbol, or any candidate locations for a | |
1667 | trampoline, are within range of the branch. For this reason, the | |
1668 | kernel does not support fixing up the R_ARM_THM_JUMP11 (102) | |
1669 | relocation in modules at all, and it makes little sense to add | |
1670 | support. | |
1671 | ||
1672 | The symptom is that the kernel fails with an "unsupported | |
1673 | relocation" error when loading some modules. | |
1674 | ||
1675 | Until fixed tools are available, passing | |
1676 | -fno-optimize-sibling-calls to gcc should prevent gcc generating | |
1677 | code which hits this problem, at the cost of a bit of extra runtime | |
1678 | stack usage in some cases. | |
1679 | ||
1680 | The problem is described in more detail at: | |
1681 | https://bugs.launchpad.net/binutils-linaro/+bug/725126 | |
1682 | ||
1683 | Only Thumb-2 kernels are affected. | |
1684 | ||
1685 | Unless you are sure your tools don't have this problem, say Y. | |
1686 | ||
0becb088 CM |
1687 | config ARM_ASM_UNIFIED |
1688 | bool | |
1689 | ||
704bdda0 NP |
1690 | config AEABI |
1691 | bool "Use the ARM EABI to compile the kernel" | |
1692 | help | |
1693 | This option allows for the kernel to be compiled using the latest | |
1694 | ARM ABI (aka EABI). This is only useful if you are using a user | |
1695 | space environment that is also compiled with EABI. | |
1696 | ||
1697 | Since there are major incompatibilities between the legacy ABI and | |
1698 | EABI, especially with regard to structure member alignment, this | |
1699 | option also changes the kernel syscall calling convention to | |
1700 | disambiguate both ABIs and allow for backward compatibility support | |
1701 | (selected with CONFIG_OABI_COMPAT). | |
1702 | ||
1703 | To use this you need GCC version 4.0.0 or later. | |
1704 | ||
6c90c872 | 1705 | config OABI_COMPAT |
a73a3ff1 | 1706 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
9bc433a1 | 1707 | depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL |
6c90c872 NP |
1708 | default y |
1709 | help | |
1710 | This option preserves the old syscall interface along with the | |
1711 | new (ARM EABI) one. It also provides a compatibility layer to | |
1712 | intercept syscalls that have structure arguments which layout | |
1713 | in memory differs between the legacy ABI and the new ARM EABI | |
1714 | (only for non "thumb" binaries). This option adds a tiny | |
1715 | overhead to all syscalls and produces a slightly larger kernel. | |
1716 | If you know you'll be using only pure EABI user space then you | |
1717 | can say N here. If this option is not selected and you attempt | |
1718 | to execute a legacy ABI binary then the result will be | |
1719 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
1720 | at all). If in doubt say Y. | |
1721 | ||
eb33575c | 1722 | config ARCH_HAS_HOLES_MEMORYMODEL |
e80d6a24 | 1723 | bool |
e80d6a24 | 1724 | |
05944d74 RK |
1725 | config ARCH_SPARSEMEM_ENABLE |
1726 | bool | |
1727 | ||
07a2f737 RK |
1728 | config ARCH_SPARSEMEM_DEFAULT |
1729 | def_bool ARCH_SPARSEMEM_ENABLE | |
1730 | ||
05944d74 | 1731 | config ARCH_SELECT_MEMORY_MODEL |
be370302 | 1732 | def_bool ARCH_SPARSEMEM_ENABLE |
c80d79d7 | 1733 | |
7b7bf499 WD |
1734 | config HAVE_ARCH_PFN_VALID |
1735 | def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM | |
1736 | ||
053a96ca | 1737 | config HIGHMEM |
e8db89a2 RK |
1738 | bool "High Memory Support" |
1739 | depends on MMU | |
053a96ca NP |
1740 | help |
1741 | The address space of ARM processors is only 4 Gigabytes large | |
1742 | and it has to accommodate user address space, kernel address | |
1743 | space as well as some memory mapped IO. That means that, if you | |
1744 | have a large amount of physical memory and/or IO, not all of the | |
1745 | memory can be "permanently mapped" by the kernel. The physical | |
1746 | memory that is not permanently mapped is called "high memory". | |
1747 | ||
1748 | Depending on the selected kernel/user memory split, minimum | |
1749 | vmalloc space and actual amount of RAM, you may not need this | |
1750 | option which should result in a slightly faster kernel. | |
1751 | ||
1752 | If unsure, say n. | |
1753 | ||
65cec8e3 RK |
1754 | config HIGHPTE |
1755 | bool "Allocate 2nd-level pagetables from highmem" | |
1756 | depends on HIGHMEM | |
65cec8e3 | 1757 | |
1b8873a0 JI |
1758 | config HW_PERF_EVENTS |
1759 | bool "Enable hardware performance counter support for perf events" | |
fe166148 | 1760 | depends on PERF_EVENTS && CPU_HAS_PMU |
1b8873a0 JI |
1761 | default y |
1762 | help | |
1763 | Enable hardware performance counter support for perf events. If | |
1764 | disabled, perf events will use software events only. | |
1765 | ||
3f22ab27 DH |
1766 | source "mm/Kconfig" |
1767 | ||
c1b2d970 MD |
1768 | config FORCE_MAX_ZONEORDER |
1769 | int "Maximum zone order" if ARCH_SHMOBILE | |
1770 | range 11 64 if ARCH_SHMOBILE | |
1771 | default "9" if SA1111 | |
1772 | default "11" | |
1773 | help | |
1774 | The kernel memory allocator divides physically contiguous memory | |
1775 | blocks into "zones", where each zone is a power of two number of | |
1776 | pages. This option selects the largest power of two that the kernel | |
1777 | keeps in the memory allocator. If you need to allocate very large | |
1778 | blocks of physically contiguous memory, then you may need to | |
1779 | increase this value. | |
1780 | ||
1781 | This config option is actually maximum order plus one. For example, | |
1782 | a value of 11 means that the largest free memory block is 2^10 pages. | |
1783 | ||
1da177e4 LT |
1784 | config LEDS |
1785 | bool "Timer and CPU usage LEDs" | |
e055d5bf | 1786 | depends on ARCH_CDB89712 || ARCH_EBSA110 || \ |
8c8fdbc9 | 1787 | ARCH_EBSA285 || ARCH_INTEGRATOR || \ |
1da177e4 LT |
1788 | ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ |
1789 | ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ | |
73a59c1c | 1790 | ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ |
25329671 | 1791 | ARCH_AT91 || ARCH_DAVINCI || \ |
ff3042fb | 1792 | ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW |
1da177e4 LT |
1793 | help |
1794 | If you say Y here, the LEDs on your machine will be used | |
1795 | to provide useful information about your current system status. | |
1796 | ||
1797 | If you are compiling a kernel for a NetWinder or EBSA-285, you will | |
1798 | be able to select which LEDs are active using the options below. If | |
1799 | you are compiling a kernel for the EBSA-110 or the LART however, the | |
1800 | red LED will simply flash regularly to indicate that the system is | |
1801 | still functional. It is safe to say Y here if you have a CATS | |
1802 | system, but the driver will do nothing. | |
1803 | ||
1804 | config LEDS_TIMER | |
1805 | bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ | |
eebdf7d7 DB |
1806 | OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ |
1807 | || MACH_OMAP_PERSEUS2 | |
1da177e4 | 1808 | depends on LEDS |
0567a0c0 | 1809 | depends on !GENERIC_CLOCKEVENTS |
1da177e4 LT |
1810 | default y if ARCH_EBSA110 |
1811 | help | |
1812 | If you say Y here, one of the system LEDs (the green one on the | |
1813 | NetWinder, the amber one on the EBSA285, or the red one on the LART) | |
1814 | will flash regularly to indicate that the system is still | |
1815 | operational. This is mainly useful to kernel hackers who are | |
1816 | debugging unstable kernels. | |
1817 | ||
1818 | The LART uses the same LED for both Timer LED and CPU usage LED | |
1819 | functions. You may choose to use both, but the Timer LED function | |
1820 | will overrule the CPU usage LED. | |
1821 | ||
1822 | config LEDS_CPU | |
1823 | bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ | |
eebdf7d7 DB |
1824 | !ARCH_OMAP) \ |
1825 | || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ | |
1826 | || MACH_OMAP_PERSEUS2 | |
1da177e4 LT |
1827 | depends on LEDS |
1828 | help | |
1829 | If you say Y here, the red LED will be used to give a good real | |
1830 | time indication of CPU usage, by lighting whenever the idle task | |
1831 | is not currently executing. | |
1832 | ||
1833 | The LART uses the same LED for both Timer LED and CPU usage LED | |
1834 | functions. You may choose to use both, but the Timer LED function | |
1835 | will overrule the CPU usage LED. | |
1836 | ||
1837 | config ALIGNMENT_TRAP | |
1838 | bool | |
f12d0d7c | 1839 | depends on CPU_CP15_MMU |
1da177e4 | 1840 | default y if !ARCH_EBSA110 |
e119bfff | 1841 | select HAVE_PROC_CPU if PROC_FS |
1da177e4 | 1842 | help |
84eb8d06 | 1843 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
1844 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
1845 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
1846 | fetch/store instructions will be emulated in software if you say | |
1847 | here, which has a severe performance impact. This is necessary for | |
1848 | correct operation of some network protocols. With an IP-only | |
1849 | configuration it is safe to say N, otherwise say Y. | |
1850 | ||
39ec58f3 LB |
1851 | config UACCESS_WITH_MEMCPY |
1852 | bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)" | |
1853 | depends on MMU && EXPERIMENTAL | |
1854 | default y if CPU_FEROCEON | |
1855 | help | |
1856 | Implement faster copy_to_user and clear_user methods for CPU | |
1857 | cores where a 8-word STM instruction give significantly higher | |
1858 | memory write throughput than a sequence of individual 32bit stores. | |
1859 | ||
1860 | A possible side effect is a slight increase in scheduling latency | |
1861 | between threads sharing the same address space if they invoke | |
1862 | such copy operations with large buffers. | |
1863 | ||
1864 | However, if the CPU data cache is using a write-allocate mode, | |
1865 | this option is unlikely to provide any performance gain. | |
1866 | ||
70c70d97 NP |
1867 | config SECCOMP |
1868 | bool | |
1869 | prompt "Enable seccomp to safely compute untrusted bytecode" | |
1870 | ---help--- | |
1871 | This kernel feature is useful for number crunching applications | |
1872 | that may need to compute untrusted bytecode during their | |
1873 | execution. By using pipes or other transports made available to | |
1874 | the process as file descriptors supporting the read/write | |
1875 | syscalls, it's possible to isolate those applications in | |
1876 | their own address space using seccomp. Once seccomp is | |
1877 | enabled via prctl(PR_SET_SECCOMP), it cannot be disabled | |
1878 | and the task is only allowed to execute a few safe syscalls | |
1879 | defined by each seccomp mode. | |
1880 | ||
c743f380 NP |
1881 | config CC_STACKPROTECTOR |
1882 | bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" | |
4a50bfe3 | 1883 | depends on EXPERIMENTAL |
c743f380 NP |
1884 | help |
1885 | This option turns on the -fstack-protector GCC feature. This | |
1886 | feature puts, at the beginning of functions, a canary value on | |
1887 | the stack just before the return address, and validates | |
1888 | the value just before actually returning. Stack based buffer | |
1889 | overflows (that need to overwrite this return address) now also | |
1890 | overwrite the canary, which gets detected and the attack is then | |
1891 | neutralized via a kernel panic. | |
1892 | This feature requires gcc version 4.2 or above. | |
1893 | ||
73a65b3f UKK |
1894 | config DEPRECATED_PARAM_STRUCT |
1895 | bool "Provide old way to pass kernel parameters" | |
1896 | help | |
1897 | This was deprecated in 2001 and announced to live on for 5 years. | |
1898 | Some old boot loaders still use this way. | |
1899 | ||
1da177e4 LT |
1900 | endmenu |
1901 | ||
1902 | menu "Boot options" | |
1903 | ||
9eb8f674 GL |
1904 | config USE_OF |
1905 | bool "Flattened Device Tree support" | |
1906 | select OF | |
1907 | select OF_EARLY_FLATTREE | |
08a543ad | 1908 | select IRQ_DOMAIN |
9eb8f674 GL |
1909 | help |
1910 | Include support for flattened device tree machine descriptions. | |
1911 | ||
1da177e4 LT |
1912 | # Compressed boot loader in ROM. Yes, we really want to ask about |
1913 | # TEXT and BSS so we preserve their values in the config files. | |
1914 | config ZBOOT_ROM_TEXT | |
1915 | hex "Compressed ROM boot loader base address" | |
1916 | default "0" | |
1917 | help | |
1918 | The physical address at which the ROM-able zImage is to be | |
1919 | placed in the target. Platforms which normally make use of | |
1920 | ROM-able zImage formats normally set this to a suitable | |
1921 | value in their defconfig file. | |
1922 | ||
1923 | If ZBOOT_ROM is not enabled, this has no effect. | |
1924 | ||
1925 | config ZBOOT_ROM_BSS | |
1926 | hex "Compressed ROM boot loader BSS address" | |
1927 | default "0" | |
1928 | help | |
f8c440b2 DF |
1929 | The base address of an area of read/write memory in the target |
1930 | for the ROM-able zImage which must be available while the | |
1931 | decompressor is running. It must be large enough to hold the | |
1932 | entire decompressed kernel plus an additional 128 KiB. | |
1933 | Platforms which normally make use of ROM-able zImage formats | |
1934 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
1935 | |
1936 | If ZBOOT_ROM is not enabled, this has no effect. | |
1937 | ||
1938 | config ZBOOT_ROM | |
1939 | bool "Compressed boot loader in ROM/flash" | |
1940 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
1941 | help | |
1942 | Say Y here if you intend to execute your compressed kernel image | |
1943 | (zImage) directly from ROM or flash. If unsure, say N. | |
1944 | ||
090ab3ff SH |
1945 | choice |
1946 | prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" | |
1947 | depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL | |
1948 | default ZBOOT_ROM_NONE | |
1949 | help | |
1950 | Include experimental SD/MMC loading code in the ROM-able zImage. | |
59bf8964 | 1951 | With this enabled it is possible to write the ROM-able zImage |
090ab3ff SH |
1952 | kernel image to an MMC or SD card and boot the kernel straight |
1953 | from the reset vector. At reset the processor Mask ROM will load | |
59bf8964 | 1954 | the first part of the ROM-able zImage which in turn loads the |
090ab3ff SH |
1955 | rest the kernel image to RAM. |
1956 | ||
1957 | config ZBOOT_ROM_NONE | |
1958 | bool "No SD/MMC loader in zImage (EXPERIMENTAL)" | |
1959 | help | |
1960 | Do not load image from SD or MMC | |
1961 | ||
f45b1149 SH |
1962 | config ZBOOT_ROM_MMCIF |
1963 | bool "Include MMCIF loader in zImage (EXPERIMENTAL)" | |
f45b1149 | 1964 | help |
090ab3ff SH |
1965 | Load image from MMCIF hardware block. |
1966 | ||
1967 | config ZBOOT_ROM_SH_MOBILE_SDHI | |
1968 | bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)" | |
1969 | help | |
1970 | Load image from SDHI hardware block | |
1971 | ||
1972 | endchoice | |
f45b1149 | 1973 | |
e2a6a3aa JB |
1974 | config ARM_APPENDED_DTB |
1975 | bool "Use appended device tree blob to zImage (EXPERIMENTAL)" | |
1976 | depends on OF && !ZBOOT_ROM && EXPERIMENTAL | |
1977 | help | |
1978 | With this option, the boot code will look for a device tree binary | |
1979 | (DTB) appended to zImage | |
1980 | (e.g. cat zImage <filename>.dtb > zImage_w_dtb). | |
1981 | ||
1982 | This is meant as a backward compatibility convenience for those | |
1983 | systems with a bootloader that can't be upgraded to accommodate | |
1984 | the documented boot protocol using a device tree. | |
1985 | ||
1986 | Beware that there is very little in terms of protection against | |
1987 | this option being confused by leftover garbage in memory that might | |
1988 | look like a DTB header after a reboot if no actual DTB is appended | |
1989 | to zImage. Do not leave this option active in a production kernel | |
1990 | if you don't intend to always append a DTB. Proper passing of the | |
1991 | location into r2 of a bootloader provided DTB is always preferable | |
1992 | to this option. | |
1993 | ||
b90b9a38 NP |
1994 | config ARM_ATAG_DTB_COMPAT |
1995 | bool "Supplement the appended DTB with traditional ATAG information" | |
1996 | depends on ARM_APPENDED_DTB | |
1997 | help | |
1998 | Some old bootloaders can't be updated to a DTB capable one, yet | |
1999 | they provide ATAGs with memory configuration, the ramdisk address, | |
2000 | the kernel cmdline string, etc. Such information is dynamically | |
2001 | provided by the bootloader and can't always be stored in a static | |
2002 | DTB. To allow a device tree enabled kernel to be used with such | |
2003 | bootloaders, this option allows zImage to extract the information | |
2004 | from the ATAG list and store it at run time into the appended DTB. | |
2005 | ||
d0f34a11 GR |
2006 | choice |
2007 | prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT | |
2008 | default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
2009 | ||
2010 | config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
2011 | bool "Use bootloader kernel arguments if available" | |
2012 | help | |
2013 | Uses the command-line options passed by the boot loader instead of | |
2014 | the device tree bootargs property. If the boot loader doesn't provide | |
2015 | any, the device tree bootargs property will be used. | |
2016 | ||
2017 | config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND | |
2018 | bool "Extend with bootloader kernel arguments" | |
2019 | help | |
2020 | The command-line arguments provided by the boot loader will be | |
2021 | appended to the the device tree bootargs property. | |
2022 | ||
2023 | endchoice | |
2024 | ||
1da177e4 LT |
2025 | config CMDLINE |
2026 | string "Default kernel command string" | |
2027 | default "" | |
2028 | help | |
2029 | On some architectures (EBSA110 and CATS), there is currently no way | |
2030 | for the boot loader to pass arguments to the kernel. For these | |
2031 | architectures, you should supply some command-line options at build | |
2032 | time by entering them here. As a minimum, you should specify the | |
2033 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
2034 | ||
4394c124 VB |
2035 | choice |
2036 | prompt "Kernel command line type" if CMDLINE != "" | |
2037 | default CMDLINE_FROM_BOOTLOADER | |
2038 | ||
2039 | config CMDLINE_FROM_BOOTLOADER | |
2040 | bool "Use bootloader kernel arguments if available" | |
2041 | help | |
2042 | Uses the command-line options passed by the boot loader. If | |
2043 | the boot loader doesn't provide any, the default kernel command | |
2044 | string provided in CMDLINE will be used. | |
2045 | ||
2046 | config CMDLINE_EXTEND | |
2047 | bool "Extend bootloader kernel arguments" | |
2048 | help | |
2049 | The command-line arguments provided by the boot loader will be | |
2050 | appended to the default kernel command string. | |
2051 | ||
92d2040d AH |
2052 | config CMDLINE_FORCE |
2053 | bool "Always use the default kernel command string" | |
92d2040d AH |
2054 | help |
2055 | Always use the default kernel command string, even if the boot | |
2056 | loader passes other arguments to the kernel. | |
2057 | This is useful if you cannot or don't want to change the | |
2058 | command-line options your boot loader passes to the kernel. | |
4394c124 | 2059 | endchoice |
92d2040d | 2060 | |
1da177e4 LT |
2061 | config XIP_KERNEL |
2062 | bool "Kernel Execute-In-Place from ROM" | |
497b7e94 | 2063 | depends on !ZBOOT_ROM && !ARM_LPAE |
1da177e4 LT |
2064 | help |
2065 | Execute-In-Place allows the kernel to run from non-volatile storage | |
2066 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
2067 | space since the text section of the kernel is not loaded from flash | |
2068 | to RAM. Read-write sections, such as the data section and stack, | |
2069 | are still copied to RAM. The XIP kernel is not compressed since | |
2070 | it has to run directly from flash, so it will take more space to | |
2071 | store it. The flash address used to link the kernel object files, | |
2072 | and for storing it, is configuration dependent. Therefore, if you | |
2073 | say Y here, you must know the proper physical address where to | |
2074 | store the kernel image depending on your own flash memory usage. | |
2075 | ||
2076 | Also note that the make target becomes "make xipImage" rather than | |
2077 | "make zImage" or "make Image". The final kernel binary to put in | |
2078 | ROM memory will be arch/arm/boot/xipImage. | |
2079 | ||
2080 | If unsure, say N. | |
2081 | ||
2082 | config XIP_PHYS_ADDR | |
2083 | hex "XIP Kernel Physical Location" | |
2084 | depends on XIP_KERNEL | |
2085 | default "0x00080000" | |
2086 | help | |
2087 | This is the physical address in your flash memory the kernel will | |
2088 | be linked for and stored to. This address is dependent on your | |
2089 | own flash usage. | |
2090 | ||
c587e4a6 RP |
2091 | config KEXEC |
2092 | bool "Kexec system call (EXPERIMENTAL)" | |
02b73e2e | 2093 | depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU) |
c587e4a6 RP |
2094 | help |
2095 | kexec is a system call that implements the ability to shutdown your | |
2096 | current kernel, and to start another kernel. It is like a reboot | |
01dd2fbf | 2097 | but it is independent of the system firmware. And like a reboot |
c587e4a6 RP |
2098 | you can start any kernel with it, not just Linux. |
2099 | ||
2100 | It is an ongoing process to be certain the hardware in a machine | |
2101 | is properly shutdown, so do not be surprised if this code does not | |
2102 | initially work for you. It may help to enable device hotplugging | |
2103 | support. | |
2104 | ||
4cd9d6f7 RP |
2105 | config ATAGS_PROC |
2106 | bool "Export atags in procfs" | |
b98d7291 UL |
2107 | depends on KEXEC |
2108 | default y | |
4cd9d6f7 RP |
2109 | help |
2110 | Should the atags used to boot the kernel be exported in an "atags" | |
2111 | file in procfs. Useful with kexec. | |
2112 | ||
cb5d39b3 MW |
2113 | config CRASH_DUMP |
2114 | bool "Build kdump crash kernel (EXPERIMENTAL)" | |
2115 | depends on EXPERIMENTAL | |
2116 | help | |
2117 | Generate crash dump after being started by kexec. This should | |
2118 | be normally only set in special crash dump kernels which are | |
2119 | loaded in the main kernel with kexec-tools into a specially | |
2120 | reserved region and then later executed after a crash by | |
2121 | kdump/kexec. The crash dump kernel must be compiled to a | |
2122 | memory address not used by the main kernel | |
2123 | ||
2124 | For more details see Documentation/kdump/kdump.txt | |
2125 | ||
e69edc79 EM |
2126 | config AUTO_ZRELADDR |
2127 | bool "Auto calculation of the decompressed kernel image address" | |
2128 | depends on !ZBOOT_ROM && !ARCH_U300 | |
2129 | help | |
2130 | ZRELADDR is the physical address where the decompressed kernel | |
2131 | image will be placed. If AUTO_ZRELADDR is selected, the address | |
2132 | will be determined at run-time by masking the current IP with | |
2133 | 0xf8000000. This assumes the zImage being placed in the first 128MB | |
2134 | from start of memory. | |
2135 | ||
1da177e4 LT |
2136 | endmenu |
2137 | ||
ac9d7efc | 2138 | menu "CPU Power Management" |
1da177e4 | 2139 | |
89c52ed4 | 2140 | if ARCH_HAS_CPUFREQ |
1da177e4 LT |
2141 | |
2142 | source "drivers/cpufreq/Kconfig" | |
2143 | ||
64f102b6 YS |
2144 | config CPU_FREQ_IMX |
2145 | tristate "CPUfreq driver for i.MX CPUs" | |
2146 | depends on ARCH_MXC && CPU_FREQ | |
2147 | help | |
2148 | This enables the CPUfreq driver for i.MX CPUs. | |
2149 | ||
1da177e4 LT |
2150 | config CPU_FREQ_SA1100 |
2151 | bool | |
1da177e4 LT |
2152 | |
2153 | config CPU_FREQ_SA1110 | |
2154 | bool | |
1da177e4 LT |
2155 | |
2156 | config CPU_FREQ_INTEGRATOR | |
2157 | tristate "CPUfreq driver for ARM Integrator CPUs" | |
2158 | depends on ARCH_INTEGRATOR && CPU_FREQ | |
2159 | default y | |
2160 | help | |
2161 | This enables the CPUfreq driver for ARM Integrator CPUs. | |
2162 | ||
2163 | For details, take a look at <file:Documentation/cpu-freq>. | |
2164 | ||
2165 | If in doubt, say Y. | |
2166 | ||
9e2697ff RK |
2167 | config CPU_FREQ_PXA |
2168 | bool | |
2169 | depends on CPU_FREQ && ARCH_PXA && PXA25x | |
2170 | default y | |
ca7d156e | 2171 | select CPU_FREQ_TABLE |
9e2697ff RK |
2172 | select CPU_FREQ_DEFAULT_GOV_USERSPACE |
2173 | ||
9d56c02a BD |
2174 | config CPU_FREQ_S3C |
2175 | bool | |
2176 | help | |
2177 | Internal configuration node for common cpufreq on Samsung SoC | |
2178 | ||
2179 | config CPU_FREQ_S3C24XX | |
4a50bfe3 | 2180 | bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" |
b130d5c2 | 2181 | depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL |
9d56c02a BD |
2182 | select CPU_FREQ_S3C |
2183 | help | |
2184 | This enables the CPUfreq driver for the Samsung S3C24XX family | |
2185 | of CPUs. | |
2186 | ||
2187 | For details, take a look at <file:Documentation/cpu-freq>. | |
2188 | ||
2189 | If in doubt, say N. | |
2190 | ||
2191 | config CPU_FREQ_S3C24XX_PLL | |
4a50bfe3 | 2192 | bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" |
9d56c02a BD |
2193 | depends on CPU_FREQ_S3C24XX && EXPERIMENTAL |
2194 | help | |
2195 | Compile in support for changing the PLL frequency from the | |
2196 | S3C24XX series CPUfreq driver. The PLL takes time to settle | |
2197 | after a frequency change, so by default it is not enabled. | |
2198 | ||
2199 | This also means that the PLL tables for the selected CPU(s) will | |
2200 | be built which may increase the size of the kernel image. | |
2201 | ||
2202 | config CPU_FREQ_S3C24XX_DEBUG | |
2203 | bool "Debug CPUfreq Samsung driver core" | |
2204 | depends on CPU_FREQ_S3C24XX | |
2205 | help | |
2206 | Enable s3c_freq_dbg for the Samsung S3C CPUfreq core | |
2207 | ||
2208 | config CPU_FREQ_S3C24XX_IODEBUG | |
2209 | bool "Debug CPUfreq Samsung driver IO timing" | |
2210 | depends on CPU_FREQ_S3C24XX | |
2211 | help | |
2212 | Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core | |
2213 | ||
e6d197a6 BD |
2214 | config CPU_FREQ_S3C24XX_DEBUGFS |
2215 | bool "Export debugfs for CPUFreq" | |
2216 | depends on CPU_FREQ_S3C24XX && DEBUG_FS | |
2217 | help | |
2218 | Export status information via debugfs. | |
2219 | ||
1da177e4 LT |
2220 | endif |
2221 | ||
ac9d7efc RK |
2222 | source "drivers/cpuidle/Kconfig" |
2223 | ||
2224 | endmenu | |
2225 | ||
1da177e4 LT |
2226 | menu "Floating point emulation" |
2227 | ||
2228 | comment "At least one emulation must be selected" | |
2229 | ||
2230 | config FPE_NWFPE | |
2231 | bool "NWFPE math emulation" | |
593c252a | 2232 | depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL |
1da177e4 LT |
2233 | ---help--- |
2234 | Say Y to include the NWFPE floating point emulator in the kernel. | |
2235 | This is necessary to run most binaries. Linux does not currently | |
2236 | support floating point hardware so you need to say Y here even if | |
2237 | your machine has an FPA or floating point co-processor podule. | |
2238 | ||
2239 | You may say N here if you are going to load the Acorn FPEmulator | |
2240 | early in the bootup. | |
2241 | ||
2242 | config FPE_NWFPE_XP | |
2243 | bool "Support extended precision" | |
bedf142b | 2244 | depends on FPE_NWFPE |
1da177e4 LT |
2245 | help |
2246 | Say Y to include 80-bit support in the kernel floating-point | |
2247 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
2248 | Note that gcc does not generate 80-bit operations by default, | |
2249 | so in most cases this option only enlarges the size of the | |
2250 | floating point emulator without any good reason. | |
2251 | ||
2252 | You almost surely want to say N here. | |
2253 | ||
2254 | config FPE_FASTFPE | |
2255 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
8993a44c | 2256 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL |
1da177e4 LT |
2257 | ---help--- |
2258 | Say Y here to include the FAST floating point emulator in the kernel. | |
2259 | This is an experimental much faster emulator which now also has full | |
2260 | precision for the mantissa. It does not support any exceptions. | |
2261 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
2262 | ||
2263 | It should be sufficient for most programs. It may be not suitable | |
2264 | for scientific calculations, but you have to check this for yourself. | |
2265 | If you do not feel you need a faster FP emulation you should better | |
2266 | choose NWFPE. | |
2267 | ||
2268 | config VFP | |
2269 | bool "VFP-format floating point maths" | |
e399b1a4 | 2270 | depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
1da177e4 LT |
2271 | help |
2272 | Say Y to include VFP support code in the kernel. This is needed | |
2273 | if your hardware includes a VFP unit. | |
2274 | ||
2275 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
2276 | release notes and additional status information. | |
2277 | ||
2278 | Say N if your target does not have VFP hardware. | |
2279 | ||
25ebee02 CM |
2280 | config VFPv3 |
2281 | bool | |
2282 | depends on VFP | |
2283 | default y if CPU_V7 | |
2284 | ||
b5872db4 CM |
2285 | config NEON |
2286 | bool "Advanced SIMD (NEON) Extension support" | |
2287 | depends on VFPv3 && CPU_V7 | |
2288 | help | |
2289 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD | |
2290 | Extension. | |
2291 | ||
1da177e4 LT |
2292 | endmenu |
2293 | ||
2294 | menu "Userspace binary formats" | |
2295 | ||
2296 | source "fs/Kconfig.binfmt" | |
2297 | ||
2298 | config ARTHUR | |
2299 | tristate "RISC OS personality" | |
704bdda0 | 2300 | depends on !AEABI |
1da177e4 LT |
2301 | help |
2302 | Say Y here to include the kernel code necessary if you want to run | |
2303 | Acorn RISC OS/Arthur binaries under Linux. This code is still very | |
2304 | experimental; if this sounds frightening, say N and sleep in peace. | |
2305 | You can also say M here to compile this support as a module (which | |
2306 | will be called arthur). | |
2307 | ||
2308 | endmenu | |
2309 | ||
2310 | menu "Power management options" | |
2311 | ||
eceab4ac | 2312 | source "kernel/power/Kconfig" |
1da177e4 | 2313 | |
f4cb5700 | 2314 | config ARCH_SUSPEND_POSSIBLE |
3d5e8af4 | 2315 | depends on !ARCH_S5PC100 && !ARCH_TEGRA |
6a786182 | 2316 | depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ |
3f5d0819 | 2317 | CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK |
f4cb5700 JB |
2318 | def_bool y |
2319 | ||
15e0d9e3 AB |
2320 | config ARM_CPU_SUSPEND |
2321 | def_bool PM_SLEEP | |
2322 | ||
1da177e4 LT |
2323 | endmenu |
2324 | ||
d5950b43 SR |
2325 | source "net/Kconfig" |
2326 | ||
ac25150f | 2327 | source "drivers/Kconfig" |
1da177e4 LT |
2328 | |
2329 | source "fs/Kconfig" | |
2330 | ||
1da177e4 LT |
2331 | source "arch/arm/Kconfig.debug" |
2332 | ||
2333 | source "security/Kconfig" | |
2334 | ||
2335 | source "crypto/Kconfig" | |
2336 | ||
2337 | source "lib/Kconfig" |