/*
- * Copyright (c) 2013 TRUSTONIC LIMITED
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * 3. Neither the name of the TRUSTONIC LIMITED nor the names of its
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
+Copyright © Trustonic Limited 2013
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Trustonic Limited nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
/** \addtogroup ROOTPA AIDL Interfaces
* @{
/**
* This API contains method(s) that are intended to be used for developer
- * TA installation. Note that this API may be removed in the future when the
- * developer TA installation is handled by a service manager and installation of
+ * trustlet installation. Note that this API may be removed in the future when the
+ * developer trustlet installation is handled by a service manager and installation of
* all trutlets follow the same architecture for RootPA point of view.
*
* The service is started by sending intent com.gd.mobicore.pa.service.DEVELOPER_SERVICE in binding.
interface RootPADeveloperIfc{
/**
- * This method can be used for installing "developer TA" that is not tied to any
+ * This method can be used for installing "developer trustlet" that is not tied to any
* service provider and/or service manager. It contacts Service Enabler and asks it to
* perform the tasks, so the device has to be connected to network in order for this to
* succeed.
* The service progress is informed with the same Intents as is progress of the
* @ref RootPAServiceIfc#doProvisioning, however there is an additional
* Intent com.gd.mobicore.pa.service.INSTALL_TRUSTLET for returning the encrypted
- * TA binary (in case of dynamic installation where taBinary is given
+ * trustlet binary (in case of dynamic installation where trustletBinary is given
* as a parameter).
*
* There are constants related to the intents in @ref RootPAProvisioningIntents
*
* @param spid service provider id
- * @param uuid uuid of the TA in hex, without dashes. Needs to be correct length.
- * @param taBinary TA binary to be encrypted with and returned back.
+ * @param uuid uuid of the trustlet in hex, without dashes. Needs to be correct length.
+ * @param trustletBinary trustlet binary to be encrypted with and returned back.
* If the binary is already encrypted, this array must be empty. The binary
- * has to be encrypted for transfer. Note that only either taBinary
+ * has to be encrypted for transfer. Note that only either trustletBinary
* or key can be given. There are sperate instructions on how the binary is to
- * be encrypted and packaged. Key and taBinary are exclusive, only one of
+ * be encrypted and packaged. Key and trustletBinary are exclusive, only one of
* them can be given. This methods uses default values for memoryType (2),
- * numberOfInstances (1) and flags (0) when TA binary is installed.
- * @param key a key that has been used to encrypt the TA binary in case when
- * the TA binary is not given as a parameter. This key has to be
+ * numberOfInstances (1) and flags (0) when trustlet binary is installed.
+ * @param key a key that has been used to encrypt the trustlet binary in case when
+ * the trustlet binary is not given as a parameter. This key has to be
* encrypted for transfer. There are sperate instructions on how the key is to
- * be encrypted and packaged. Key and taBinary are exclusive, only one of
+ * be encrypted and packaged. Key and trustletBinary are exclusive, only one of
* them can be given.
- * @param minTltVersion minimum version of the TA
+ * @param minTltVersion minimum version of the trustlet
* @param tltPukHash this field is not used at the moment, null is fine here.
*
* @return indication of successful start of provisioning thread (ROOTPA_OK) or an error code
*/
CommandResult installTrustletOrKey(in int spid,
in byte[] uuid,
- in byte[] taBinary,
+ in byte[] trustletBinary,
in byte[] key,
in int minTltVersion,
in byte[] tltPukHash);
/**
- * This method can be used for installing "developer TA" that is not tied to any
+ * This method can be used for installing "developer trustlet" that is not tied to any
* service provider and/or service manager. It contacts Service Enabler and asks it to
* perform the tasks, so the device has to be connected to network in order for this to
* succeed.
* The service progress is informed with the same Intents as is progress of the
* @ref RootPAServiceIfc#doProvisioning, however there is an additional
* Intent com.gd.mobicore.pa.service.INSTALL_TRUSTLET for returning the encrypted
- * TA binary.
+ * trustlet binary.
*
* There are constants related to the intents in @ref RootPAProvisioningIntents
*
* @param spid service provider id
- * @param uuid uuid of the TA in hex, without dashes. Needs to be correct length.
- * @param taBinary TA binary to be encrypted with and returned back.
+ * @param uuid uuid of the trustlet in hex, without dashes. Needs to be correct length.
+ * @param trustletBinary trustlet binary to be encrypted with and returned back.
* If the binary is already encrypted, this array must be empty. The binary
- * has to be encrypted for transfer. Note that only either taBinary
+ * has to be encrypted for transfer. Note that only either trustletBinary
* or key can be given. There are sperate instructions on how the binary is to
* be encrypted and packaged.
- * @param minTltVersion minimum version of the TA
+ * @param minTltVersion minimum version of the trustlet
* @param tltPukHash this field is not used at the moment, null is fine here.
- * @param memoryType memory where the TA is to be loaded and executed: 0 - if enough space is available,
- load the TA into the internal memory, otherwise into the external memory, 1 - internal memory,
+ * @param memoryType memory where the trustlet is to be loaded and executed: 0 - if enough space is available,
+ load the Trustlet into the internal memory, otherwise into the external memory, 1 - internal memory,
2 - external memory
- * @param numberOfInstances indicates how many instances of a TA can be installed (run) in parallel
+ * @param numberOfInstances indicates how many instances of a trustlet can be installed (run) in parallel
* @param flags current flags are: 1 - permanent, 2 - service has no WSW control interface, 4 - debuggable
*
* @return indication of successful start of provisioning thread (ROOTPA_OK) or an error code
*/
CommandResult installTrustlet(in int spid,
in byte[] uuid,
- in byte[] taBinary,
+ in byte[] trustletBinary,
in int minTltVersion,
in byte[] tltPukHash,
in int memoryType,
projects / GitHub / LineageOS / android_hardware_samsung_slsi_exynos7580.git / blobdiff