[GitHub/LineageOS/G12/android_hardware_amlogic_kernel-modules_dhd-driver.git] / firmware / wifi / bcm43436b0 / nvram_ap6236.txt

#AP6236_NVRAM_V1.1_20170804
# NVRAM file for BCM943430WLPTH, Bx Chip
# 2.4 GHz, 20 MHz BW mode

# The following parameter values are just placeholders, need to be updated.
manfid=0x2d0
prodid=0x0727
vendid=0x14e4
devid=0x43e2
boardtype=0x0727
boardrev=0x1331
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=11
boardflags=0x00404201
boardflags3=0x08000000
xtalfreq=26000
nocrc=1
ag0=255
aa2g=1
ccode=ALL

pa0itssit=0x20
extpagain2g=0
#PA parameters for 2.4GHz, measured at CHIP OUTPUT
pa2ga0=-202,5582,-671
AvVmid_c0=0x0,0xc8
cckpwroffset0=5

# PPR params
maxp2ga0=74
txpwrbckof=6
cckbw202gpo=0x2222
legofdmbw202gpo=0x55555555
mcsbw202gpo=0x76666666
propbw202gpo=0xcc

# OFDM IIR :
ofdmdigfilttype=18
ofdmdigfilttypebe=18
# PAPD mode:
papdmode=1
pacalidx2g=42
papdepsoffset=-22
papdendidx=58

# LTECX flags
ltecxmux=0
ltecxpadnum=0x0102
ltecxfnsel=0x44
ltecxgcigpio=0x01

il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b

deadman_to=0xffffffff
# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
muxenab=0x10
# CLDO PWM voltage settings - 0x4 - 1.1 volt
#cldo_pwm=0x4

#VCO freq 326.4MHz
spurconfig=0x3 

AvVmidIQcal=0x2,0xa8
Commit	Line	Data
e9f3219f JA	1	#AP6236_NVRAM_V1.1_20170804
	2	# NVRAM file for BCM943430WLPTH, Bx Chip
	3	# 2.4 GHz, 20 MHz BW mode
	4
	5	# The following parameter values are just placeholders, need to be updated.
	6	manfid=0x2d0
	7	prodid=0x0727
	8	vendid=0x14e4
	9	devid=0x43e2
	10	boardtype=0x0727
	11	boardrev=0x1331
	12	boardnum=22
	13	macaddr=00:90:4c:c5:12:38
	14	sromrev=11
	15	boardflags=0x00404201
	16	boardflags3=0x08000000
	17	xtalfreq=26000
	18	nocrc=1
	19	ag0=255
	20	aa2g=1
	21	ccode=ALL
	22
	23	pa0itssit=0x20
	24	extpagain2g=0
	25	#PA parameters for 2.4GHz, measured at CHIP OUTPUT
	26	pa2ga0=-202,5582,-671
	27	AvVmid_c0=0x0,0xc8
	28	cckpwroffset0=5
	29
	30	# PPR params
	31	maxp2ga0=74
	32	txpwrbckof=6
	33	cckbw202gpo=0x2222
	34	legofdmbw202gpo=0x55555555
	35	mcsbw202gpo=0x76666666
	36	propbw202gpo=0xcc
	37
	38	# OFDM IIR :
	39	ofdmdigfilttype=18
	40	ofdmdigfilttypebe=18
	41	# PAPD mode:
	42	papdmode=1
	43	pacalidx2g=42
	44	papdepsoffset=-22
	45	papdendidx=58
	46
	47	# LTECX flags
	48	ltecxmux=0
	49	ltecxpadnum=0x0102
	50	ltecxfnsel=0x44
	51	ltecxgcigpio=0x01
	52
	53	il0macaddr=00:90:4c:c5:12:38
	54	wl0id=0x431b
	55
	56	deadman_to=0xffffffff
	57	# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
	58	muxenab=0x10
	59	# CLDO PWM voltage settings - 0x4 - 1.1 volt
	60	#cldo_pwm=0x4
	61
	62	#VCO freq 326.4MHz
	63	spurconfig=0x3
	64
65	AvVmidIQcal=0x2,0xa8