projects / GitHub / LineageOS / G12 / android_hardware_amlogic_kernel-modules_dhd-driver.git / blame
projects / GitHub / LineageOS / G12 / android_hardware_amlogic_kernel-modules_dhd-driver.git / blame
| Commit | Line | Data |
|---|---|---|
| d2839953 RC |
1 | /* |
| 2 | * Custom OID/ioctl definitions for | |
| 3 | * Broadcom 802.11abg Networking Device Driver | |
| 4 | * | |
| 5 | * Definitions subject to change without notice. | |
| 6 | * | |
| 965f77c4 | 7 | * Copyright (C) 1999-2019, Broadcom. |
| d2839953 RC |
8 | * |
| 9 | * Unless you and Broadcom execute a separate written software license | |
| 10 | * agreement governing use of this software, this software is licensed to you | |
| 11 | * under the terms of the GNU General Public License version 2 (the "GPL"), | |
| 12 | * available at http://www.broadcom.com/licenses/GPLv2.php, with the | |
| 13 | * following added to such license: | |
| 14 | * | |
| 15 | * As a special exception, the copyright holders of this software give you | |
| 16 | * permission to link this software with independent modules, and to copy and | |
| 17 | * distribute the resulting executable under terms of your choice, provided that | |
| 18 | * you also meet, for each linked independent module, the terms and conditions of | |
| 19 | * the license of that module. An independent module is a module which is not | |
| 20 | * derived from this software. The special exception does not apply to any | |
| 21 | * modifications of the software. | |
| 22 | * | |
| 23 | * Notwithstanding the above, under no circumstances may you combine this | |
| 24 | * software in any way with any other Broadcom software provided under a license | |
| 25 | * other than the GPL, without Broadcom's express prior written consent. | |
| 26 | * | |
| 27 | * | |
| 28 | * <<Broadcom-WL-IPTag/Open:>> | |
| 29 | * | |
| 965f77c4 | 30 | * $Id: wlioctl_defs.h 826113 2019-06-18 21:04:03Z $ |
| d2839953 RC |
31 | */ |
| 32 | ||
| 33 | #ifndef wlioctl_defs_h | |
| 34 | #define wlioctl_defs_h | |
| 35 | ||
| 36 | /* All builds use the new 11ac ratespec/chanspec */ | |
| 37 | #undef D11AC_IOTYPES | |
| 38 | #define D11AC_IOTYPES | |
| 39 | ||
| 40 | #ifndef USE_NEW_RSPEC_DEFS | |
| 965f77c4 RC |
41 | /* Remove when no referencing branches exist. |
| 42 | * These macros will be used only in older branches (prior to K branch). | |
| 43 | * Wl layer in newer branches and trunk use those defined in bcmwifi_rspec.h. | |
| 44 | * Non-wl layer in newer branches and trunk may use these as well | |
| 45 | * until they are removed. | |
| 46 | */ | |
| d2839953 RC |
47 | /* WL_RSPEC defines for rate information */ |
| 48 | #define WL_RSPEC_RATE_MASK 0x000000FF /* rate or HT MCS value */ | |
| d2839953 RC |
49 | #define WL_RSPEC_VHT_MCS_MASK 0x0000000F /* VHT MCS value */ |
| 50 | #define WL_RSPEC_VHT_NSS_MASK 0x000000F0 /* VHT Nss value */ | |
| 51 | #define WL_RSPEC_VHT_NSS_SHIFT 4 /* VHT Nss value shift */ | |
| 52 | #define WL_RSPEC_TXEXP_MASK 0x00000300 | |
| 53 | #define WL_RSPEC_TXEXP_SHIFT 8 | |
| 54 | #define WL_RSPEC_BW_MASK 0x00070000 /* bandwidth mask */ | |
| 55 | #define WL_RSPEC_BW_SHIFT 16 /* bandwidth shift */ | |
| 56 | #define WL_RSPEC_STBC 0x00100000 /* STBC encoding, Nsts = 2 x Nss */ | |
| 57 | #define WL_RSPEC_TXBF 0x00200000 /* bit indicates TXBF mode */ | |
| 58 | #define WL_RSPEC_LDPC 0x00400000 /* bit indicates adv coding in use */ | |
| 59 | #define WL_RSPEC_SGI 0x00800000 /* Short GI mode */ | |
| 60 | #define WL_RSPEC_ENCODING_MASK 0x03000000 /* Encoding of Rate/MCS field */ | |
| 61 | #define WL_RSPEC_OVERRIDE_RATE 0x40000000 /* bit indicate to override mcs only */ | |
| 62 | #define WL_RSPEC_OVERRIDE_MODE 0x80000000 /* bit indicates override rate & mode */ | |
| 63 | ||
| 64 | /* WL_RSPEC_ENCODING field defs */ | |
| 65 | #define WL_RSPEC_ENCODE_RATE 0x00000000 /* Legacy rate is stored in RSPEC_RATE_MASK */ | |
| 66 | #define WL_RSPEC_ENCODE_HT 0x01000000 /* HT MCS is stored in RSPEC_RATE_MASK */ | |
| 67 | #define WL_RSPEC_ENCODE_VHT 0x02000000 /* VHT MCS and Nss is stored in RSPEC_RATE_MASK */ | |
| d2839953 RC |
68 | |
| 69 | /* WL_RSPEC_BW field defs */ | |
| 70 | #define WL_RSPEC_BW_UNSPECIFIED 0 | |
| 71 | #define WL_RSPEC_BW_20MHZ 0x00010000 | |
| 72 | #define WL_RSPEC_BW_40MHZ 0x00020000 | |
| 73 | #define WL_RSPEC_BW_80MHZ 0x00030000 | |
| 74 | #define WL_RSPEC_BW_160MHZ 0x00040000 | |
| 75 | #define WL_RSPEC_BW_10MHZ 0x00050000 | |
| 76 | #define WL_RSPEC_BW_5MHZ 0x00060000 | |
| 77 | #define WL_RSPEC_BW_2P5MHZ 0x00070000 | |
| 78 | ||
| 79 | #define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */ | |
| 80 | ||
| 81 | #endif /* !USE_NEW_RSPEC_DEFS */ | |
| 82 | ||
| 83 | /* Legacy defines for the nrate iovar */ | |
| 84 | #define OLD_NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */ | |
| 85 | #define OLD_NRATE_RATE_MASK 0x0000007f /* rate/mcs value */ | |
| 86 | #define OLD_NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */ | |
| 87 | #define OLD_NRATE_STF_SHIFT 8 /* stf mode shift */ | |
| 88 | #define OLD_NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */ | |
| 89 | #define OLD_NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */ | |
| 90 | #define OLD_NRATE_SGI 0x00800000 /* sgi mode */ | |
| 91 | #define OLD_NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */ | |
| 92 | ||
| 93 | #define OLD_NRATE_STF_SISO 0 /* stf mode SISO */ | |
| 94 | #define OLD_NRATE_STF_CDD 1 /* stf mode CDD */ | |
| 95 | #define OLD_NRATE_STF_STBC 2 /* stf mode STBC */ | |
| 96 | #define OLD_NRATE_STF_SDM 3 /* stf mode SDM */ | |
| 97 | ||
| 98 | #define WLC_11N_N_PROP_MCS 6 | |
| 99 | #define WLC_11N_FIRST_PROP_MCS 87 | |
| 100 | #define WLC_11N_LAST_PROP_MCS 102 | |
| 101 | ||
| 102 | #define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */ | |
| 103 | #define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */ | |
| 104 | ||
| 105 | #define IBSS_MED 15 /* Mediom in-bss congestion percentage */ | |
| 106 | #define IBSS_HI 25 /* Hi in-bss congestion percentage */ | |
| 107 | #define OBSS_MED 12 | |
| 108 | #define OBSS_HI 25 | |
| 109 | #define INTERFER_MED 5 | |
| 110 | #define INTERFER_HI 10 | |
| 111 | ||
| 112 | #define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */ | |
| 113 | #define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */ | |
| 114 | #define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */ | |
| 115 | #define CCA_FLAGS_PREFER_1_6_11 0x10 | |
| 116 | #define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */ | |
| 117 | ||
| 118 | #define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */ | |
| 119 | #define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */ | |
| 120 | #define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */ | |
| 121 | #define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */ | |
| 122 | #define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */ | |
| 123 | ||
| 124 | #define WL_STA_AID(a) ((a) &~ 0xc000) | |
| 125 | ||
| 126 | /* Flags for sta_info_t indicating properties of STA */ | |
| 127 | #define WL_STA_BRCM 0x00000001 /* Running a Broadcom driver */ | |
| 128 | #define WL_STA_WME 0x00000002 /* WMM association */ | |
| 129 | #define WL_STA_NONERP 0x00000004 /* No ERP */ | |
| 130 | #define WL_STA_AUTHE 0x00000008 /* Authenticated */ | |
| 131 | #define WL_STA_ASSOC 0x00000010 /* Associated */ | |
| 132 | #define WL_STA_AUTHO 0x00000020 /* Authorized */ | |
| 133 | #define WL_STA_WDS 0x00000040 /* Wireless Distribution System */ | |
| 134 | #define WL_STA_WDS_LINKUP 0x00000080 /* WDS traffic/probes flowing properly */ | |
| 135 | #define WL_STA_PS 0x00000100 /* STA is in power save mode from AP's viewpoint */ | |
| 136 | #define WL_STA_APSD_BE 0x00000200 /* APSD delv/trigger for AC_BE is default enabled */ | |
| 137 | #define WL_STA_APSD_BK 0x00000400 /* APSD delv/trigger for AC_BK is default enabled */ | |
| 138 | #define WL_STA_APSD_VI 0x00000800 /* APSD delv/trigger for AC_VI is default enabled */ | |
| 139 | #define WL_STA_APSD_VO 0x00001000 /* APSD delv/trigger for AC_VO is default enabled */ | |
| 140 | #define WL_STA_N_CAP 0x00002000 /* STA 802.11n capable */ | |
| 141 | #define WL_STA_SCBSTATS 0x00004000 /* Per STA debug stats */ | |
| 142 | #define WL_STA_AMPDU_CAP 0x00008000 /* STA AMPDU capable */ | |
| 143 | #define WL_STA_AMSDU_CAP 0x00010000 /* STA AMSDU capable */ | |
| 144 | #define WL_STA_MIMO_PS 0x00020000 /* mimo ps mode is enabled */ | |
| 145 | #define WL_STA_MIMO_RTS 0x00040000 /* send rts in mimo ps mode */ | |
| 146 | #define WL_STA_RIFS_CAP 0x00080000 /* rifs enabled */ | |
| 147 | #define WL_STA_VHT_CAP 0x00100000 /* STA VHT(11ac) capable */ | |
| 148 | #define WL_STA_WPS 0x00200000 /* WPS state */ | |
| 149 | #define WL_STA_DWDS_CAP 0x01000000 /* DWDS CAP */ | |
| 150 | #define WL_STA_DWDS 0x02000000 /* DWDS active */ | |
| 151 | #define WL_WDS_LINKUP WL_STA_WDS_LINKUP /* deprecated */ | |
| 152 | ||
| 153 | /* STA HT cap fields */ | |
| 154 | #define WL_STA_CAP_LDPC_CODING 0x0001 /* Support for rx of LDPC coded pkts */ | |
| 155 | #define WL_STA_CAP_40MHZ 0x0002 /* FALSE:20Mhz, TRUE:20/40MHZ supported */ | |
| 156 | #define WL_STA_CAP_MIMO_PS_MASK 0x000C /* Mimo PS mask */ | |
| 157 | #define WL_STA_CAP_MIMO_PS_SHIFT 0x0002 /* Mimo PS shift */ | |
| 158 | #define WL_STA_CAP_MIMO_PS_OFF 0x0003 /* Mimo PS, no restriction */ | |
| 159 | #define WL_STA_CAP_MIMO_PS_RTS 0x0001 /* Mimo PS, send RTS/CTS around MIMO frames */ | |
| 160 | #define WL_STA_CAP_MIMO_PS_ON 0x0000 /* Mimo PS, MIMO disallowed */ | |
| 161 | #define WL_STA_CAP_GF 0x0010 /* Greenfield preamble support */ | |
| 162 | #define WL_STA_CAP_SHORT_GI_20 0x0020 /* 20MHZ short guard interval support */ | |
| 163 | #define WL_STA_CAP_SHORT_GI_40 0x0040 /* 40Mhz short guard interval support */ | |
| 164 | #define WL_STA_CAP_TX_STBC 0x0080 /* Tx STBC support */ | |
| 165 | #define WL_STA_CAP_RX_STBC_MASK 0x0300 /* Rx STBC mask */ | |
| 166 | #define WL_STA_CAP_RX_STBC_SHIFT 8 /* Rx STBC shift */ | |
| 167 | #define WL_STA_CAP_DELAYED_BA 0x0400 /* delayed BA support */ | |
| 168 | #define WL_STA_CAP_MAX_AMSDU 0x0800 /* Max AMSDU size in bytes , 0=3839, 1=7935 */ | |
| 169 | #define WL_STA_CAP_DSSS_CCK 0x1000 /* DSSS/CCK supported by the BSS */ | |
| 170 | #define WL_STA_CAP_PSMP 0x2000 /* Power Save Multi Poll support */ | |
| 171 | #define WL_STA_CAP_40MHZ_INTOLERANT 0x4000 /* 40MHz Intolerant */ | |
| 172 | #define WL_STA_CAP_LSIG_TXOP 0x8000 /* L-SIG TXOP protection support */ | |
| 173 | ||
| 174 | #define WL_STA_CAP_RX_STBC_NO 0x0 /* no rx STBC support */ | |
| 175 | #define WL_STA_CAP_RX_STBC_ONE_STREAM 0x1 /* rx STBC support of 1 spatial stream */ | |
| 176 | #define WL_STA_CAP_RX_STBC_TWO_STREAM 0x2 /* rx STBC support of 1-2 spatial streams */ | |
| 177 | #define WL_STA_CAP_RX_STBC_THREE_STREAM 0x3 /* rx STBC support of 1-3 spatial streams */ | |
| 178 | ||
| 179 | /* scb vht flags */ | |
| 180 | #define WL_STA_VHT_LDPCCAP 0x0001 | |
| 181 | #define WL_STA_SGI80 0x0002 | |
| 182 | #define WL_STA_SGI160 0x0004 | |
| 183 | #define WL_STA_VHT_TX_STBCCAP 0x0008 | |
| 184 | #define WL_STA_VHT_RX_STBCCAP 0x0010 | |
| 185 | #define WL_STA_SU_BEAMFORMER 0x0020 | |
| 186 | #define WL_STA_SU_BEAMFORMEE 0x0040 | |
| 187 | #define WL_STA_MU_BEAMFORMER 0x0080 | |
| 188 | #define WL_STA_MU_BEAMFORMEE 0x0100 | |
| 189 | #define WL_STA_VHT_TXOP_PS 0x0200 | |
| 190 | #define WL_STA_HTC_VHT_CAP 0x0400 | |
| 191 | ||
| 192 | /* Values for TX Filter override mode */ | |
| 193 | #define WLC_TXFILTER_OVERRIDE_DISABLED 0 | |
| 194 | #define WLC_TXFILTER_OVERRIDE_ENABLED 1 | |
| 195 | ||
| 196 | #define WL_IOCTL_ACTION_GET 0x0 | |
| 197 | #define WL_IOCTL_ACTION_SET 0x1 | |
| 198 | #define WL_IOCTL_ACTION_OVL_IDX_MASK 0x1e | |
| 199 | #define WL_IOCTL_ACTION_OVL_RSV 0x20 | |
| 200 | #define WL_IOCTL_ACTION_OVL 0x40 | |
| 201 | #define WL_IOCTL_ACTION_MASK 0x7e | |
| 202 | #define WL_IOCTL_ACTION_OVL_SHIFT 1 | |
| 203 | ||
| 204 | /* For WLC_SET_INFRA ioctl & infra_configuration iovar SET/GET operations */ | |
| 205 | #define WL_BSSTYPE_INDEP 0 | |
| 206 | #define WL_BSSTYPE_INFRA 1 | |
| 207 | #define WL_BSSTYPE_ANY 2 /* deprecated */ | |
| 208 | #define WL_BSSTYPE_MESH 3 | |
| 209 | ||
| 210 | /* Bit definitions of mws_active_scan_throttle iovar */ | |
| 211 | ||
| 212 | #define WL_SCAN_THROTTLE_MASK 0xF | |
| 213 | ||
| 214 | #define WL_SCAN_THROTTLE_ASSOCSCAN (1U << 0) | |
| 215 | #define WL_SCAN_THROTTLE_ROAMSCAN (1U << 1) | |
| 216 | #define WL_SCAN_THROTTLE_OTHER_FW_SCAN (1U << 2) /* for other scans like pno etc */ | |
| 217 | #define WL_SCAN_THROTTLE_HOSTSCAN (1U << 3) | |
| 218 | ||
| 219 | #define WL_SCANFLAGS_CLIENT_MASK 0xF00 | |
| 220 | #define WL_SCANFLAGS_CLIENT_SHIFT 8 | |
| 221 | ||
| 222 | /* Bitmask for scan_type */ | |
| 965f77c4 RC |
223 | /* Reserved flag precludes the use of 0xff for scan_type which is |
| 224 | * interpreted as default for backward compatibility. | |
| 225 | * Low priority scan uses currently reserved bit, | |
| 226 | * this should be changed as scan_type extended. | |
| 227 | * So, reserved flag definition removed. | |
| 228 | */ | |
| d2839953 RC |
229 | /* Use lower 16 bit for scan flags, the upper 16 bits are for internal use */ |
| 230 | #define WL_SCANFLAGS_PASSIVE 0x01 /* force passive scan */ | |
| 231 | #define WL_SCANFLAGS_LOW_PRIO 0x02 /* Low priority scan */ | |
| 232 | #define WL_SCANFLAGS_PROHIBITED 0x04 /* allow scanning prohibited channels */ | |
| 233 | #define WL_SCANFLAGS_OFFCHAN 0x08 /* allow scanning/reporting off-channel APs */ | |
| 234 | #define WL_SCANFLAGS_HOTSPOT 0x10 /* automatic ANQP to hotspot APs */ | |
| 235 | #define WL_SCANFLAGS_SWTCHAN 0x20 /* Force channel switch for differerent bandwidth */ | |
| 236 | #define WL_SCANFLAGS_FORCE_PARALLEL 0x40 /* Force parallel scan even when actcb_fn_t is on. | |
| 237 | * by default parallel scan will be disabled if actcb_fn_t | |
| 238 | * is provided. | |
| 239 | */ | |
| 240 | #define WL_SCANFLAGS_SISO 0x40 /* Use 1 RX chain for scanning */ | |
| 241 | #define WL_SCANFLAGS_MIMO 0x80 /* Force MIMO scanning */ | |
| 242 | #define WL_SCANFLAGS_ASSOCSCAN 0x100 /* Assoc scan */ | |
| 243 | #define WL_SCANFLAGS_ROAMSCAN 0x200 /* Roam scan */ | |
| 244 | #define WL_SCANFLAGS_FWSCAN 0x400 /* Other FW scan */ | |
| 245 | #define WL_SCANFLAGS_HOSTSCAN 0x800 /* Host scan */ | |
| 965f77c4 RC |
246 | #define WL_SCANFLAGS_LOW_POWER_SCAN 0x1000 /* LOW power scan, scheduled scan |
| 247 | * only on scancore | |
| 248 | */ | |
| 249 | #define WL_SCANFLAGS_HIGH_ACCURACY 0x2000 /* High accuracy scan, which needs | |
| 250 | * reliable scan results | |
| 251 | */ | |
| 252 | #define WL_SCANFLAGS_LOW_SPAN 0x4000 /* LOW span scan, which expects | |
| 253 | * scan to be completed ASAP | |
| 254 | */ | |
| d2839953 RC |
255 | |
| 256 | /* wl_iscan_results status values */ | |
| 257 | #define WL_SCAN_RESULTS_SUCCESS 0 | |
| 258 | #define WL_SCAN_RESULTS_PARTIAL 1 | |
| 259 | #define WL_SCAN_RESULTS_PENDING 2 | |
| 260 | #define WL_SCAN_RESULTS_ABORTED 3 | |
| 261 | #define WL_SCAN_RESULTS_NO_MEM 4 | |
| 262 | ||
| 965f77c4 RC |
263 | /* Flags for parallel scan */ |
| 264 | /* Bitmap to enable/disable rsdb parallel scan, 5g-5g/2g-2g parallel scan | |
| 265 | * SCAN_PARALLEL_PASSIVE_5G ==> 5g-5g parallel scan | |
| 266 | * SCAN_PARALLEL_PASSIVE_2G ==> 2g-2g parallel scan | |
| 267 | */ | |
| 268 | #define SCAN_PARALLEL_PASSIVE_5G (0x40) | |
| 269 | #define SCAN_PARALLEL_PASSIVE_2G (0x80) | |
| 270 | ||
| d2839953 RC |
271 | #define SCANOL_ENABLED (1 << 0) |
| 272 | #define SCANOL_BCAST_SSID (1 << 1) | |
| 273 | #define SCANOL_NOTIFY_BCAST_SSID (1 << 2) | |
| 274 | #define SCANOL_RESULTS_PER_CYCLE (1 << 3) | |
| 275 | ||
| 276 | /* scan times in milliseconds */ | |
| 277 | #define SCANOL_HOME_TIME 45 /* for home channel processing */ | |
| 278 | #define SCANOL_ASSOC_TIME 20 /* dwell on a channel while associated */ | |
| 279 | #define SCANOL_UNASSOC_TIME 40 /* dwell on a channel while unassociated */ | |
| 280 | #define SCANOL_PASSIVE_TIME 110 /* listen on a channelfor passive scan */ | |
| 281 | #define SCANOL_AWAY_LIMIT 100 /* max time to be away from home channel */ | |
| 282 | #define SCANOL_IDLE_REST_TIME 40 | |
| 283 | #define SCANOL_IDLE_REST_MULTIPLIER 0 | |
| 284 | #define SCANOL_ACTIVE_REST_TIME 20 | |
| 285 | #define SCANOL_ACTIVE_REST_MULTIPLIER 0 | |
| 286 | #define SCANOL_CYCLE_IDLE_REST_TIME 300000 /* Idle Rest Time between Scan Cycle (msec) */ | |
| 287 | #define SCANOL_CYCLE_IDLE_REST_MULTIPLIER 0 /* Idle Rest Time Multiplier */ | |
| 288 | #define SCANOL_CYCLE_ACTIVE_REST_TIME 200 | |
| 289 | #define SCANOL_CYCLE_ACTIVE_REST_MULTIPLIER 0 | |
| 290 | #define SCANOL_MAX_REST_TIME 3600000 /* max rest time between scan cycle (msec) */ | |
| 291 | #define SCANOL_CYCLE_DEFAULT 0 /* default for Max Scan Cycle, 0 = forever */ | |
| 292 | #define SCANOL_CYCLE_MAX 864000 /* Max Scan Cycle */ | |
| 293 | /* 10 sec/scan cycle => 100 days */ | |
| 294 | #define SCANOL_NPROBES 2 /* for Active scan; send n probes on each channel */ | |
| 295 | #define SCANOL_NPROBES_MAX 5 /* for Active scan; send n probes on each channel */ | |
| 296 | #define SCANOL_SCAN_START_DLY 10 /* delay start of offload scan (sec) */ | |
| 297 | #define SCANOL_SCAN_START_DLY_MAX 240 /* delay start of offload scan (sec) */ | |
| 298 | #define SCANOL_MULTIPLIER_MAX 10 /* Max Multiplier */ | |
| 299 | #define SCANOL_UNASSOC_TIME_MAX 100 /* max dwell on a channel while unassociated */ | |
| 300 | #define SCANOL_PASSIVE_TIME_MAX 500 /* max listen on a channel for passive scan */ | |
| 301 | #define SCANOL_SSID_MAX 16 /* max supported preferred SSID */ | |
| 302 | ||
| 303 | /* masks for channel and ssid count */ | |
| 304 | #define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff | |
| 305 | #define WL_SCAN_PARAMS_NSSID_SHIFT 16 | |
| 306 | ||
| 307 | #define WL_SCAN_ACTION_START 1 | |
| 308 | #define WL_SCAN_ACTION_CONTINUE 2 | |
| 309 | #define WL_SCAN_ACTION_ABORT 3 | |
| 310 | #if defined(SIMPLE_ISCAN) | |
| 311 | #define ISCAN_RETRY_CNT 5 | |
| 312 | #define ISCAN_STATE_IDLE 0 | |
| 313 | #define ISCAN_STATE_SCANING 1 | |
| 314 | #define ISCAN_STATE_PENDING 2 | |
| 315 | #endif /* SIMPLE_ISCAN */ | |
| 316 | ||
| 317 | #define ANTENNA_NUM_1 1 /* total number of antennas to be used */ | |
| 318 | #define ANTENNA_NUM_2 2 | |
| 319 | #define ANTENNA_NUM_3 3 | |
| 320 | #define ANTENNA_NUM_4 4 | |
| 321 | ||
| 322 | #define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */ | |
| 323 | #define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */ | |
| 324 | #define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */ | |
| 325 | #define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */ | |
| 326 | #define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */ | |
| 327 | #define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */ | |
| 328 | ||
| 329 | /* interference source detection and identification mode */ | |
| 330 | #define ITFR_MODE_DISABLE 0 /* disable feature */ | |
| 331 | #define ITFR_MODE_MANUAL_ENABLE 1 /* enable manual detection */ | |
| 332 | #define ITFR_MODE_AUTO_ENABLE 2 /* enable auto detection */ | |
| 333 | ||
| 334 | /* bit definitions for flags in interference source report */ | |
| 335 | #define ITFR_INTERFERENCED 1 /* interference detected */ | |
| 336 | #define ITFR_HOME_CHANNEL 2 /* home channel has interference */ | |
| 337 | #define ITFR_NOISY_ENVIRONMENT 4 /* noisy environemnt so feature stopped */ | |
| 338 | ||
| 339 | #define WL_NUM_RPI_BINS 8 | |
| 340 | #define WL_RM_TYPE_BASIC 1 | |
| 341 | #define WL_RM_TYPE_CCA 2 | |
| 342 | #define WL_RM_TYPE_RPI 3 | |
| 343 | #define WL_RM_TYPE_ABORT -1 /* ABORT any in-progress RM request */ | |
| 344 | ||
| 345 | #define WL_RM_FLAG_PARALLEL (1<<0) | |
| 346 | ||
| 347 | #define WL_RM_FLAG_LATE (1<<1) | |
| 348 | #define WL_RM_FLAG_INCAPABLE (1<<2) | |
| 349 | #define WL_RM_FLAG_REFUSED (1<<3) | |
| 350 | ||
| 351 | /* flags */ | |
| 352 | #define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */ | |
| 353 | ||
| 354 | #define WLC_CIS_DEFAULT 0 /* built-in default */ | |
| 355 | #define WLC_CIS_SROM 1 /* source is sprom */ | |
| 356 | #define WLC_CIS_OTP 2 /* source is otp */ | |
| 357 | ||
| 358 | /* PCL - Power Control Loop */ | |
| 359 | /* current gain setting is replaced by user input */ | |
| 360 | #define WL_ATTEN_APP_INPUT_PCL_OFF 0 /* turn off PCL, apply supplied input */ | |
| 361 | #define WL_ATTEN_PCL_ON 1 /* turn on PCL */ | |
| 362 | /* current gain setting is maintained */ | |
| 363 | #define WL_ATTEN_PCL_OFF 2 /* turn off PCL. */ | |
| 364 | ||
| 365 | /* defines used by poweridx iovar - it controls power in a-band */ | |
| 366 | /* current gain setting is maintained */ | |
| 367 | #define WL_PWRIDX_PCL_OFF -2 /* turn off PCL. */ | |
| 368 | #define WL_PWRIDX_PCL_ON -1 /* turn on PCL */ | |
| 369 | #define WL_PWRIDX_LOWER_LIMIT -2 /* lower limit */ | |
| 370 | #define WL_PWRIDX_UPPER_LIMIT 63 /* upper limit */ | |
| 371 | /* value >= 0 causes | |
| 372 | * - input to be set to that value | |
| 373 | * - PCL to be off | |
| 374 | */ | |
| 375 | ||
| 376 | #define BCM_MAC_STATUS_INDICATION (0x40010200L) | |
| 377 | ||
| 378 | /* Values for TX Filter override mode */ | |
| 379 | #define WLC_TXFILTER_OVERRIDE_DISABLED 0 | |
| 380 | #define WLC_TXFILTER_OVERRIDE_ENABLED 1 | |
| 381 | ||
| 382 | /* magic pattern used for mismatch driver and wl */ | |
| 383 | #define WL_TXFIFO_SZ_MAGIC 0xa5a5 | |
| 384 | ||
| 385 | /* check this magic number */ | |
| 386 | #define WLC_IOCTL_MAGIC 0x14e46c77 | |
| 387 | ||
| 388 | /* bss_info_cap_t flags */ | |
| 389 | #define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */ | |
| 390 | #define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */ | |
| 391 | #define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info received on channel (vs offchannel) */ | |
| 392 | #define WL_BSS_FLAGS_HS20 0x08 /* hotspot 2.0 capable */ | |
| 393 | #define WL_BSS_FLAGS_RSSI_INVALID 0x10 /* BSS contains invalid RSSI */ | |
| 394 | #define WL_BSS_FLAGS_RSSI_INACCURATE 0x20 /* BSS contains inaccurate RSSI */ | |
| 395 | #define WL_BSS_FLAGS_SNR_INVALID 0x40 /* BSS contains invalid SNR */ | |
| 396 | #define WL_BSS_FLAGS_NF_INVALID 0x80 /* BSS contains invalid noise floor */ | |
| 397 | ||
| 398 | /* bit definitions for bcnflags in wl_bss_info */ | |
| 399 | #define WL_BSS_BCNFLAGS_INTERWORK_PRESENT 0x01 /* beacon had IE, accessnet valid */ | |
| 400 | #define WL_BSS_BCNFLAGS_INTERWORK_PRESENT_VALID 0x02 /* on indicates support for this API */ | |
| 965f77c4 RC |
401 | #define WL_BSS_BCNFLAGS_MULTIPLE_BSSID_SET 0x4 /* this AP belongs to a multiple BSSID set */ |
| 402 | #define WL_BSS_BCNFLAGS_NONTRANSMITTED_BSSID 0x8 /* this AP is the transmitted BSSID */ | |
| d2839953 RC |
403 | |
| 404 | /* bssinfo flag for nbss_cap */ | |
| 405 | #define VHT_BI_SGI_80MHZ 0x00000100 | |
| 406 | #define VHT_BI_80MHZ 0x00000200 | |
| 407 | #define VHT_BI_160MHZ 0x00000400 | |
| 408 | #define VHT_BI_8080MHZ 0x00000800 | |
| 409 | ||
| 410 | /* reference to wl_ioctl_t struct used by usermode driver */ | |
| 411 | #define ioctl_subtype set /* subtype param */ | |
| 412 | #define ioctl_pid used /* pid param */ | |
| 413 | #define ioctl_status needed /* status param */ | |
| 414 | ||
| 415 | /* Enumerate crypto algorithms */ | |
| 416 | #define CRYPTO_ALGO_OFF 0 | |
| 417 | #define CRYPTO_ALGO_WEP1 1 | |
| 418 | #define CRYPTO_ALGO_TKIP 2 | |
| 419 | #define CRYPTO_ALGO_WEP128 3 | |
| 420 | #define CRYPTO_ALGO_AES_CCM 4 | |
| 421 | #define CRYPTO_ALGO_AES_OCB_MSDU 5 | |
| 422 | #define CRYPTO_ALGO_AES_OCB_MPDU 6 | |
| 423 | #if !defined(BCMCCX) && !defined(BCMEXTCCX) | |
| 424 | #define CRYPTO_ALGO_NALG 7 | |
| 425 | #else | |
| 426 | #define CRYPTO_ALGO_CKIP 7 | |
| 427 | #define CRYPTO_ALGO_CKIP_MMH 8 | |
| 428 | #define CRYPTO_ALGO_WEP_MMH 9 | |
| 429 | #define CRYPTO_ALGO_NALG 10 | |
| 430 | #endif /* !BCMCCX && !BCMEXTCCX */ | |
| 431 | ||
| 432 | #define CRYPTO_ALGO_SMS4 11 | |
| 433 | #define CRYPTO_ALGO_PMK 12 /* for 802.1x supp to set PMK before 4-way */ | |
| 434 | #define CRYPTO_ALGO_BIP 13 /* 802.11w BIP (aes cmac) */ | |
| 435 | ||
| 436 | #define CRYPTO_ALGO_AES_GCM 14 /* 128 bit GCM */ | |
| 437 | #define CRYPTO_ALGO_AES_CCM256 15 /* 256 bit CCM */ | |
| 438 | #define CRYPTO_ALGO_AES_GCM256 16 /* 256 bit GCM */ | |
| 439 | #define CRYPTO_ALGO_BIP_CMAC256 17 /* 256 bit BIP CMAC */ | |
| 440 | #define CRYPTO_ALGO_BIP_GMAC 18 /* 128 bit BIP GMAC */ | |
| 441 | #define CRYPTO_ALGO_BIP_GMAC256 19 /* 256 bit BIP GMAC */ | |
| 442 | ||
| 443 | #define CRYPTO_ALGO_NONE CRYPTO_ALGO_OFF | |
| 444 | ||
| 445 | /* algo bit vector */ | |
| 446 | #define KEY_ALGO_MASK(_algo) (1 << _algo) | |
| 447 | ||
| 448 | #if defined(BCMCCX) || defined(BCMEXTCCX) | |
| 449 | #define KEY_ALGO_MASK_CCX (KEY_ALGO_MASK(CRYPTO_ALGO_CKIP) | \ | |
| 450 | KEY_ALGO_MASK(CRYPTO_ALGO_CKIP_MMH) | \ | |
| 451 | KEY_ALGO_MASK(CRYPTO_ALGO_WEP_MMH)) | |
| 452 | #endif /* defined(BCMCCX) || defined(BCMEXTCCX) */ | |
| 453 | ||
| 454 | #define KEY_ALGO_MASK_WEP (KEY_ALGO_MASK(CRYPTO_ALGO_WEP1) | \ | |
| 455 | KEY_ALGO_MASK(CRYPTO_ALGO_WEP128) | \ | |
| 456 | KEY_ALGO_MASK(CRYPTO_ALGO_NALG)) | |
| 457 | ||
| 458 | #define KEY_ALGO_MASK_AES (KEY_ALGO_MASK(CRYPTO_ALGO_AES_CCM) | \ | |
| 459 | KEY_ALGO_MASK(CRYPTO_ALGO_AES_CCM256) | \ | |
| 460 | KEY_ALGO_MASK(CRYPTO_ALGO_AES_GCM) | \ | |
| 461 | KEY_ALGO_MASK(CRYPTO_ALGO_AES_GCM256)) | |
| 462 | #define KEY_ALGO_MASK_TKIP (KEY_ALGO_MASK(CRYPTO_ALGO_TKIP)) | |
| 463 | #define KEY_ALGO_MASK_WAPI (KEY_ALGO_MASK(CRYPTO_ALGO_SMS4)) | |
| 464 | ||
| 465 | #define WSEC_GEN_MIC_ERROR 0x0001 | |
| 466 | #define WSEC_GEN_REPLAY 0x0002 | |
| 467 | #define WSEC_GEN_ICV_ERROR 0x0004 | |
| 468 | #define WSEC_GEN_MFP_ACT_ERROR 0x0008 | |
| 469 | #define WSEC_GEN_MFP_DISASSOC_ERROR 0x0010 | |
| 470 | #define WSEC_GEN_MFP_DEAUTH_ERROR 0x0020 | |
| 471 | ||
| 472 | #define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ | |
| 473 | #define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ | |
| 474 | #if defined(BCMCCX) || defined(BCMEXTCCX) | |
| 475 | #define WL_CKIP_KP (1 << 4) /* CMIC */ | |
| 476 | #define WL_CKIP_MMH (1 << 5) /* CKIP */ | |
| 477 | #else | |
| 478 | #define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ | |
| 479 | #define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ | |
| 480 | #endif /* BCMCCX || BCMEXTCCX */ | |
| 481 | #define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */ | |
| 965f77c4 RC |
482 | #define WL_LINK_KEY (1 << 7) /* For linking keys of both cores */ |
| 483 | #define WL_UNLINK_KEY (1 << 8) /* For unlinking keys of both cores */ | |
| d2839953 RC |
484 | |
| 485 | /* wireless security bitvec */ | |
| 486 | #define WSEC_NONE 0x0 | |
| 487 | #define WEP_ENABLED 0x0001 | |
| 488 | #define TKIP_ENABLED 0x0002 | |
| 489 | #define AES_ENABLED 0x0004 | |
| 490 | #define WSEC_SWFLAG 0x0008 | |
| 491 | #ifdef BCMCCX | |
| 492 | #define CKIP_KP_ENABLED 0x0010 | |
| 493 | #define CKIP_MIC_ENABLED 0x0020 | |
| 494 | #endif /* BCMCCX */ | |
| 495 | #define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ | |
| 496 | #ifdef BCMWAPI_WPI | |
| 497 | #define SMS4_ENABLED 0x0100 | |
| 498 | #endif /* BCMWAPI_WPI */ | |
| 499 | ||
| 500 | #define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) | |
| 501 | #define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) | |
| 502 | #define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) | |
| 503 | ||
| 504 | /* Macros to check if algorithm is enabled */ | |
| 505 | #define WSEC_INFO_ALGO_ENABLED(_wi, _algo) \ | |
| 506 | (_wi).cur_algos & (1 << CRYPTO_ALGO_##_algo) | |
| 507 | ||
| 508 | #define WSEC_INFO_ALGO_NONE(_wi) (((_wi).cur_algos) == 0) | |
| 509 | ||
| 510 | #ifdef BCMCCX | |
| 511 | #define WSEC_CKIP_KP_ENABLED(wsec) ((wsec) & CKIP_KP_ENABLED) | |
| 512 | #define WSEC_CKIP_MIC_ENABLED(wsec) ((wsec) & CKIP_MIC_ENABLED) | |
| 513 | #define WSEC_CKIP_ENABLED(wsec) ((wsec) & (CKIP_KP_ENABLED|CKIP_MIC_ENABLED)) | |
| 514 | ||
| 515 | #ifdef BCMWAPI_WPI | |
| 516 | #define WSEC_ENABLED(wsec) \ | |
| 517 | ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | \ | |
| 518 | CKIP_MIC_ENABLED | SMS4_ENABLED)) | |
| 519 | #else /* BCMWAPI_WPI */ | |
| 520 | #define WSEC_ENABLED(wsec) \ | |
| 521 | ((wsec) & \ | |
| 522 | (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | CKIP_MIC_ENABLED)) | |
| 523 | #endif /* BCMWAPI_WPI */ | |
| 524 | #else /* defined BCMCCX */ | |
| 525 | #ifdef BCMWAPI_WPI | |
| 526 | #define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | SMS4_ENABLED)) | |
| 527 | #else /* BCMWAPI_WPI */ | |
| 528 | #define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) | |
| 529 | #endif /* BCMWAPI_WPI */ | |
| 530 | #endif /* BCMCCX */ | |
| 531 | ||
| 532 | #define WSEC_SES_OW_ENABLED(wsec) ((wsec) & SES_OW_ENABLED) | |
| 533 | #ifdef BCMWAPI_WAI | |
| 534 | #define WSEC_SMS4_ENABLED(wsec) ((wsec) & SMS4_ENABLED) | |
| 535 | #endif /* BCMWAPI_WAI */ | |
| 536 | ||
| 537 | /* Following macros are not used any more. Just kept here to | |
| 538 | * avoid build issue in BISON/CARIBOU branch | |
| 539 | */ | |
| 540 | #define MFP_CAPABLE 0x0200 | |
| 541 | #define MFP_REQUIRED 0x0400 | |
| 542 | #define MFP_SHA256 0x0800 /* a special configuration for STA for WIFI test tool */ | |
| 543 | ||
| 544 | /* WPA authentication mode bitvec */ | |
| 545 | #define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ | |
| 546 | #define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ | |
| 547 | #define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ | |
| 548 | #define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ | |
| 549 | #if defined(BCMCCX) || defined(BCMEXTCCX) | |
| 550 | #define WPA_AUTH_CCKM 0x0008 /* CCKM */ | |
| 551 | #define WPA2_AUTH_CCKM 0x0010 /* CCKM2 */ | |
| 552 | #endif /* BCMCCX || BCMEXTCCX */ | |
| 553 | /* #define WPA_AUTH_8021X 0x0020 */ /* 802.1x, reserved */ | |
| 554 | #define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ | |
| 555 | #define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ | |
| 556 | #define BRCM_AUTH_PSK 0x0100 /* BRCM specific PSK */ | |
| 557 | #define BRCM_AUTH_DPT 0x0200 /* DPT PSK without group keys */ | |
| 558 | #if defined(BCMWAPI_WAI) || defined(BCMWAPI_WPI) | |
| 965f77c4 | 559 | #define WPA_AUTH_WAPI 0x0400 /* why it is same as WAPI_AUTH_UNSPECIFIED */ |
| d2839953 RC |
560 | #define WAPI_AUTH_NONE WPA_AUTH_NONE /* none (IBSS) */ |
| 561 | #define WAPI_AUTH_UNSPECIFIED 0x0400 /* over AS */ | |
| 562 | #define WAPI_AUTH_PSK 0x0800 /* Pre-shared key */ | |
| 563 | #endif /* BCMWAPI_WAI || BCMWAPI_WPI */ | |
| 564 | #define WPA2_AUTH_1X_SHA256 0x1000 /* 1X with SHA256 key derivation */ | |
| 565 | #define WPA2_AUTH_TPK 0x2000 /* TDLS Peer Key */ | |
| 566 | #define WPA2_AUTH_FT 0x4000 /* Fast Transition. */ | |
| 567 | #define WPA2_AUTH_PSK_SHA256 0x8000 /* PSK with SHA256 key derivation */ | |
| 568 | #define WPA2_AUTH_FILS_SHA256 0x10000 /* FILS with SHA256 key derivation */ | |
| 569 | #define WPA2_AUTH_FILS_SHA384 0x20000 /* FILS with SHA384 key derivation */ | |
| 570 | #define WPA2_AUTH_IS_FILS(auth) ((auth) & (WPA2_AUTH_FILS_SHA256 | WPA2_AUTH_FILS_SHA384)) | |
| 571 | #define WPA3_AUTH_SAE_PSK 0x40000 /* SAE with 4-way handshake */ | |
| d2839953 RC |
572 | #define WPA3_AUTH_OWE 0x100000 /* OWE */ |
| 573 | #define WPA3_AUTH_1X_SUITE_B_SHA256 0x200000 /* Suite B SHA256 */ | |
| 574 | #define WPA3_AUTH_1X_SUITE_B_SHA384 0x400000 /* Suite B-192 SHA384 */ | |
| 575 | #define WPA3_AUTH_PSK_SHA384 0x800000 /* PSK with SHA384 key derivation */ | |
| 965f77c4 | 576 | #define WPA3_AUTH_SAE_AP_ONLY 0x1000000 /* SAE restriction to connect to pure SAE APs */ |
| d2839953 RC |
577 | /* WPA2_AUTH_SHA256 not used anymore. Just kept here to avoid build issue in DINGO */ |
| 578 | #define WPA2_AUTH_SHA256 0x8000 | |
| 579 | #define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */ | |
| 580 | ||
| 581 | /* pmkid */ | |
| 965f77c4 | 582 | #define MAXPMKID 16 /* max # PMKID cache entries NDIS */ |
| d2839953 RC |
583 | |
| 584 | /* SROM12 changes */ | |
| 585 | #define WLC_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */ | |
| 586 | ||
| 587 | #define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ | |
| 588 | #define WLC_IOCTL_MEDLEN 1896 /* "med" length ioctl buffer required */ | |
| 589 | #if defined(LCNCONF) || defined(LCN40CONF) || defined(LCN20CONF) | |
| 590 | #define WLC_SAMPLECOLLECT_MAXLEN 8192 /* Max Sample Collect buffer */ | |
| 591 | #else | |
| 592 | #define WLC_SAMPLECOLLECT_MAXLEN 10240 /* Max Sample Collect buffer for two cores */ | |
| 593 | #endif // endif | |
| 594 | #define WLC_SAMPLECOLLECT_MAXLEN_LCN40 8192 | |
| 595 | ||
| 596 | #define WLC_IOCTL_NANRESP_MAXLEN 4096u /* "max" length nan ioctl resp buffer required */ | |
| 597 | #define WLC_IOCTL_NANRESP_MEDLEN 800u /* "med" length nan ioctl resp buffer required */ | |
| 598 | ||
| 599 | /* common ioctl definitions */ | |
| 600 | #define WLC_GET_MAGIC 0 | |
| 601 | #define WLC_GET_VERSION 1 | |
| 602 | #define WLC_UP 2 | |
| 603 | #define WLC_DOWN 3 | |
| 604 | #define WLC_GET_LOOP 4 | |
| 605 | #define WLC_SET_LOOP 5 | |
| 606 | #define WLC_DUMP 6 | |
| 607 | #define WLC_GET_MSGLEVEL 7 | |
| 608 | #define WLC_SET_MSGLEVEL 8 | |
| 609 | #define WLC_GET_PROMISC 9 | |
| 610 | #define WLC_SET_PROMISC 10 | |
| 611 | /* #define WLC_OVERLAY_IOCTL 11 */ /* not supported */ | |
| 612 | #define WLC_GET_RATE 12 | |
| 613 | #define WLC_GET_MAX_RATE 13 | |
| 614 | #define WLC_GET_INSTANCE 14 | |
| 615 | /* #define WLC_GET_FRAG 15 */ /* no longer supported */ | |
| 616 | /* #define WLC_SET_FRAG 16 */ /* no longer supported */ | |
| 617 | /* #define WLC_GET_RTS 17 */ /* no longer supported */ | |
| 618 | /* #define WLC_SET_RTS 18 */ /* no longer supported */ | |
| 619 | #define WLC_GET_INFRA 19 | |
| 620 | #define WLC_SET_INFRA 20 | |
| 621 | #define WLC_GET_AUTH 21 | |
| 622 | #define WLC_SET_AUTH 22 | |
| 623 | #define WLC_GET_BSSID 23 | |
| 624 | #define WLC_SET_BSSID 24 | |
| 625 | #define WLC_GET_SSID 25 | |
| 626 | #define WLC_SET_SSID 26 | |
| 627 | #define WLC_RESTART 27 | |
| 628 | #define WLC_TERMINATED 28 | |
| 629 | /* #define WLC_DUMP_SCB 28 */ /* no longer supported */ | |
| 630 | #define WLC_GET_CHANNEL 29 | |
| 631 | #define WLC_SET_CHANNEL 30 | |
| 632 | #define WLC_GET_SRL 31 | |
| 633 | #define WLC_SET_SRL 32 | |
| 634 | #define WLC_GET_LRL 33 | |
| 635 | #define WLC_SET_LRL 34 | |
| 636 | #define WLC_GET_PLCPHDR 35 | |
| 637 | #define WLC_SET_PLCPHDR 36 | |
| 638 | #define WLC_GET_RADIO 37 | |
| 639 | #define WLC_SET_RADIO 38 | |
| 640 | #define WLC_GET_PHYTYPE 39 | |
| 641 | #define WLC_DUMP_RATE 40 | |
| 642 | #define WLC_SET_RATE_PARAMS 41 | |
| 643 | #define WLC_GET_FIXRATE 42 | |
| 644 | #define WLC_SET_FIXRATE 43 | |
| 645 | /* #define WLC_GET_WEP 42 */ /* no longer supported */ | |
| 646 | /* #define WLC_SET_WEP 43 */ /* no longer supported */ | |
| 647 | #define WLC_GET_KEY 44 | |
| 648 | #define WLC_SET_KEY 45 | |
| 649 | #define WLC_GET_REGULATORY 46 | |
| 650 | #define WLC_SET_REGULATORY 47 | |
| 651 | #define WLC_GET_PASSIVE_SCAN 48 | |
| 652 | #define WLC_SET_PASSIVE_SCAN 49 | |
| 653 | #define WLC_SCAN 50 | |
| 654 | #define WLC_SCAN_RESULTS 51 | |
| 655 | #define WLC_DISASSOC 52 | |
| 656 | #define WLC_REASSOC 53 | |
| 657 | #define WLC_GET_ROAM_TRIGGER 54 | |
| 658 | #define WLC_SET_ROAM_TRIGGER 55 | |
| 659 | #define WLC_GET_ROAM_DELTA 56 | |
| 660 | #define WLC_SET_ROAM_DELTA 57 | |
| 661 | #define WLC_GET_ROAM_SCAN_PERIOD 58 | |
| 662 | #define WLC_SET_ROAM_SCAN_PERIOD 59 | |
| 663 | #define WLC_EVM 60 /* diag */ | |
| 664 | #define WLC_GET_TXANT 61 | |
| 665 | #define WLC_SET_TXANT 62 | |
| 666 | #define WLC_GET_ANTDIV 63 | |
| 667 | #define WLC_SET_ANTDIV 64 | |
| 668 | /* #define WLC_GET_TXPWR 65 */ /* no longer supported */ | |
| 669 | /* #define WLC_SET_TXPWR 66 */ /* no longer supported */ | |
| 670 | #define WLC_GET_CLOSED 67 | |
| 671 | #define WLC_SET_CLOSED 68 | |
| 672 | #define WLC_GET_MACLIST 69 | |
| 673 | #define WLC_SET_MACLIST 70 | |
| 674 | #define WLC_GET_RATESET 71 | |
| 675 | #define WLC_SET_RATESET 72 | |
| 676 | /* #define WLC_GET_LOCALE 73 */ /* no longer supported */ | |
| 677 | #define WLC_LONGTRAIN 74 | |
| 678 | #define WLC_GET_BCNPRD 75 | |
| 679 | #define WLC_SET_BCNPRD 76 | |
| 680 | #define WLC_GET_DTIMPRD 77 | |
| 681 | #define WLC_SET_DTIMPRD 78 | |
| 682 | #define WLC_GET_SROM 79 | |
| 683 | #define WLC_SET_SROM 80 | |
| 684 | #define WLC_GET_WEP_RESTRICT 81 | |
| 685 | #define WLC_SET_WEP_RESTRICT 82 | |
| 686 | #define WLC_GET_COUNTRY 83 | |
| 687 | #define WLC_SET_COUNTRY 84 | |
| 688 | #define WLC_GET_PM 85 | |
| 689 | #define WLC_SET_PM 86 | |
| 690 | #define WLC_GET_WAKE 87 | |
| 691 | #define WLC_SET_WAKE 88 | |
| 692 | /* #define WLC_GET_D11CNTS 89 */ /* -> "counters" iovar */ | |
| 693 | #define WLC_GET_FORCELINK 90 /* ndis only */ | |
| 694 | #define WLC_SET_FORCELINK 91 /* ndis only */ | |
| 695 | #define WLC_FREQ_ACCURACY 92 /* diag */ | |
| 696 | #define WLC_CARRIER_SUPPRESS 93 /* diag */ | |
| 697 | #define WLC_GET_PHYREG 94 | |
| 698 | #define WLC_SET_PHYREG 95 | |
| 699 | #define WLC_GET_RADIOREG 96 | |
| 700 | #define WLC_SET_RADIOREG 97 | |
| 701 | #define WLC_GET_REVINFO 98 | |
| 702 | #define WLC_GET_UCANTDIV 99 | |
| 703 | #define WLC_SET_UCANTDIV 100 | |
| 704 | #define WLC_R_REG 101 | |
| 705 | #define WLC_W_REG 102 | |
| 706 | /* #define WLC_DIAG_LOOPBACK 103 old tray diag */ | |
| 707 | /* #define WLC_RESET_D11CNTS 104 */ /* -> "reset_d11cnts" iovar */ | |
| 708 | #define WLC_GET_MACMODE 105 | |
| 709 | #define WLC_SET_MACMODE 106 | |
| 710 | #define WLC_GET_MONITOR 107 | |
| 711 | #define WLC_SET_MONITOR 108 | |
| 712 | #define WLC_GET_GMODE 109 | |
| 713 | #define WLC_SET_GMODE 110 | |
| 714 | #define WLC_GET_LEGACY_ERP 111 | |
| 715 | #define WLC_SET_LEGACY_ERP 112 | |
| 716 | #define WLC_GET_RX_ANT 113 | |
| 717 | #define WLC_GET_CURR_RATESET 114 /* current rateset */ | |
| 718 | #define WLC_GET_SCANSUPPRESS 115 | |
| 719 | #define WLC_SET_SCANSUPPRESS 116 | |
| 720 | #define WLC_GET_AP 117 | |
| 721 | #define WLC_SET_AP 118 | |
| 722 | #define WLC_GET_EAP_RESTRICT 119 | |
| 723 | #define WLC_SET_EAP_RESTRICT 120 | |
| 724 | #define WLC_SCB_AUTHORIZE 121 | |
| 725 | #define WLC_SCB_DEAUTHORIZE 122 | |
| 726 | #define WLC_GET_WDSLIST 123 | |
| 727 | #define WLC_SET_WDSLIST 124 | |
| 728 | #define WLC_GET_ATIM 125 | |
| 729 | #define WLC_SET_ATIM 126 | |
| 730 | #define WLC_GET_RSSI 127 | |
| 731 | #define WLC_GET_PHYANTDIV 128 | |
| 732 | #define WLC_SET_PHYANTDIV 129 | |
| 733 | #define WLC_AP_RX_ONLY 130 | |
| 734 | #define WLC_GET_TX_PATH_PWR 131 | |
| 735 | #define WLC_SET_TX_PATH_PWR 132 | |
| 736 | #define WLC_GET_WSEC 133 | |
| 737 | #define WLC_SET_WSEC 134 | |
| 738 | #define WLC_GET_PHY_NOISE 135 | |
| 739 | #define WLC_GET_BSS_INFO 136 | |
| 740 | #define WLC_GET_PKTCNTS 137 | |
| 741 | #define WLC_GET_LAZYWDS 138 | |
| 742 | #define WLC_SET_LAZYWDS 139 | |
| 743 | #define WLC_GET_BANDLIST 140 | |
| 744 | ||
| 745 | #define WLC_GET_BAND 141 | |
| 746 | #define WLC_SET_BAND 142 | |
| 747 | #define WLC_SCB_DEAUTHENTICATE 143 | |
| 748 | #define WLC_GET_SHORTSLOT 144 | |
| 749 | #define WLC_GET_SHORTSLOT_OVERRIDE 145 | |
| 750 | #define WLC_SET_SHORTSLOT_OVERRIDE 146 | |
| 751 | #define WLC_GET_SHORTSLOT_RESTRICT 147 | |
| 752 | #define WLC_SET_SHORTSLOT_RESTRICT 148 | |
| 753 | #define WLC_GET_GMODE_PROTECTION 149 | |
| 754 | #define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 | |
| 755 | #define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 | |
| 756 | #define WLC_UPGRADE 152 | |
| 757 | /* #define WLC_GET_MRATE 153 */ /* no longer supported */ | |
| 758 | /* #define WLC_SET_MRATE 154 */ /* no longer supported */ | |
| 759 | #define WLC_GET_IGNORE_BCNS 155 | |
| 760 | #define WLC_SET_IGNORE_BCNS 156 | |
| 761 | #define WLC_GET_SCB_TIMEOUT 157 | |
| 762 | #define WLC_SET_SCB_TIMEOUT 158 | |
| 763 | #define WLC_GET_ASSOCLIST 159 | |
| 764 | #define WLC_GET_CLK 160 | |
| 765 | #define WLC_SET_CLK 161 | |
| 766 | #define WLC_GET_UP 162 | |
| 767 | #define WLC_OUT 163 | |
| 768 | #define WLC_GET_WPA_AUTH 164 | |
| 769 | #define WLC_SET_WPA_AUTH 165 | |
| 770 | #define WLC_GET_UCFLAGS 166 | |
| 771 | #define WLC_SET_UCFLAGS 167 | |
| 772 | #define WLC_GET_PWRIDX 168 | |
| 773 | #define WLC_SET_PWRIDX 169 | |
| 774 | #define WLC_GET_TSSI 170 | |
| 775 | #define WLC_GET_SUP_RATESET_OVERRIDE 171 | |
| 776 | #define WLC_SET_SUP_RATESET_OVERRIDE 172 | |
| 777 | /* #define WLC_SET_FAST_TIMER 173 */ /* no longer supported */ | |
| 778 | /* #define WLC_GET_FAST_TIMER 174 */ /* no longer supported */ | |
| 779 | /* #define WLC_SET_SLOW_TIMER 175 */ /* no longer supported */ | |
| 780 | /* #define WLC_GET_SLOW_TIMER 176 */ /* no longer supported */ | |
| 781 | /* #define WLC_DUMP_PHYREGS 177 */ /* no longer supported */ | |
| 782 | #define WLC_GET_PROTECTION_CONTROL 178 | |
| 783 | #define WLC_SET_PROTECTION_CONTROL 179 | |
| 784 | #define WLC_GET_PHYLIST 180 | |
| 785 | #define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ | |
| 786 | #define WLC_DECRYPT_STATUS 182 /* ndis only */ | |
| 787 | #define WLC_GET_KEY_SEQ 183 | |
| 788 | #define WLC_GET_SCAN_CHANNEL_TIME 184 | |
| 789 | #define WLC_SET_SCAN_CHANNEL_TIME 185 | |
| 790 | #define WLC_GET_SCAN_UNASSOC_TIME 186 | |
| 791 | #define WLC_SET_SCAN_UNASSOC_TIME 187 | |
| 792 | #define WLC_GET_SCAN_HOME_TIME 188 | |
| 793 | #define WLC_SET_SCAN_HOME_TIME 189 | |
| 794 | #define WLC_GET_SCAN_NPROBES 190 | |
| 795 | #define WLC_SET_SCAN_NPROBES 191 | |
| 796 | #define WLC_GET_PRB_RESP_TIMEOUT 192 | |
| 797 | #define WLC_SET_PRB_RESP_TIMEOUT 193 | |
| 798 | #define WLC_GET_ATTEN 194 | |
| 799 | #define WLC_SET_ATTEN 195 | |
| 800 | #define WLC_GET_SHMEM 196 /* diag */ | |
| 801 | #define WLC_SET_SHMEM 197 /* diag */ | |
| 802 | /* #define WLC_GET_GMODE_PROTECTION_CTS 198 */ /* no longer supported */ | |
| 803 | /* #define WLC_SET_GMODE_PROTECTION_CTS 199 */ /* no longer supported */ | |
| 804 | #define WLC_SET_WSEC_TEST 200 | |
| 805 | #define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 | |
| 806 | #define WLC_TKIP_COUNTERMEASURES 202 | |
| 807 | #define WLC_GET_PIOMODE 203 | |
| 808 | #define WLC_SET_PIOMODE 204 | |
| 809 | #define WLC_SET_ASSOC_PREFER 205 | |
| 810 | #define WLC_GET_ASSOC_PREFER 206 | |
| 811 | #define WLC_SET_ROAM_PREFER 207 | |
| 812 | #define WLC_GET_ROAM_PREFER 208 | |
| 813 | #define WLC_SET_LED 209 | |
| 814 | #define WLC_GET_LED 210 | |
| 815 | #define WLC_GET_INTERFERENCE_MODE 211 | |
| 816 | #define WLC_SET_INTERFERENCE_MODE 212 | |
| 817 | #define WLC_GET_CHANNEL_QA 213 | |
| 818 | #define WLC_START_CHANNEL_QA 214 | |
| 819 | #define WLC_GET_CHANNEL_SEL 215 | |
| 820 | #define WLC_START_CHANNEL_SEL 216 | |
| 821 | #define WLC_GET_VALID_CHANNELS 217 | |
| 822 | #define WLC_GET_FAKEFRAG 218 | |
| 823 | #define WLC_SET_FAKEFRAG 219 | |
| 824 | #define WLC_GET_PWROUT_PERCENTAGE 220 | |
| 825 | #define WLC_SET_PWROUT_PERCENTAGE 221 | |
| 826 | #define WLC_SET_BAD_FRAME_PREEMPT 222 | |
| 827 | #define WLC_GET_BAD_FRAME_PREEMPT 223 | |
| 828 | #define WLC_SET_LEAP_LIST 224 | |
| 829 | #define WLC_GET_LEAP_LIST 225 | |
| 830 | #define WLC_GET_CWMIN 226 | |
| 831 | #define WLC_SET_CWMIN 227 | |
| 832 | #define WLC_GET_CWMAX 228 | |
| 833 | #define WLC_SET_CWMAX 229 | |
| 834 | #define WLC_GET_WET 230 | |
| 835 | #define WLC_SET_WET 231 | |
| 836 | #define WLC_GET_PUB 232 | |
| 837 | /* #define WLC_SET_GLACIAL_TIMER 233 */ /* no longer supported */ | |
| 838 | /* #define WLC_GET_GLACIAL_TIMER 234 */ /* no longer supported */ | |
| 839 | #define WLC_GET_KEY_PRIMARY 235 | |
| 840 | #define WLC_SET_KEY_PRIMARY 236 | |
| 841 | ||
| 842 | /* #define WLC_DUMP_RADIOREGS 237 */ /* no longer supported */ | |
| 843 | #define WLC_GET_ACI_ARGS 238 | |
| 844 | #define WLC_SET_ACI_ARGS 239 | |
| 845 | #define WLC_UNSET_CALLBACK 240 | |
| 846 | #define WLC_SET_CALLBACK 241 | |
| 847 | #define WLC_GET_RADAR 242 | |
| 848 | #define WLC_SET_RADAR 243 | |
| 849 | #define WLC_SET_SPECT_MANAGMENT 244 | |
| 850 | #define WLC_GET_SPECT_MANAGMENT 245 | |
| 851 | #define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */ | |
| 852 | #define WLC_WDS_GET_WPA_SUP 247 | |
| 853 | #define WLC_SET_CS_SCAN_TIMER 248 | |
| 854 | #define WLC_GET_CS_SCAN_TIMER 249 | |
| 855 | #define WLC_MEASURE_REQUEST 250 | |
| 856 | #define WLC_INIT 251 | |
| 857 | #define WLC_SEND_QUIET 252 | |
| 858 | #define WLC_KEEPALIVE 253 | |
| 859 | #define WLC_SEND_PWR_CONSTRAINT 254 | |
| 860 | #define WLC_UPGRADE_STATUS 255 | |
| 861 | #define WLC_CURRENT_PWR 256 | |
| 862 | #define WLC_GET_SCAN_PASSIVE_TIME 257 | |
| 863 | #define WLC_SET_SCAN_PASSIVE_TIME 258 | |
| 864 | #define WLC_LEGACY_LINK_BEHAVIOR 259 | |
| 865 | #define WLC_GET_CHANNELS_IN_COUNTRY 260 | |
| 866 | #define WLC_GET_COUNTRY_LIST 261 | |
| 867 | #define WLC_GET_VAR 262 /* get value of named variable */ | |
| 868 | #define WLC_SET_VAR 263 /* set named variable to value */ | |
| 869 | #define WLC_NVRAM_GET 264 /* deprecated */ | |
| 870 | #define WLC_NVRAM_SET 265 | |
| 871 | #define WLC_NVRAM_DUMP 266 | |
| 872 | #define WLC_REBOOT 267 | |
| 873 | #define WLC_SET_WSEC_PMK 268 | |
| 874 | #define WLC_GET_AUTH_MODE 269 | |
| 875 | #define WLC_SET_AUTH_MODE 270 | |
| 876 | #define WLC_GET_WAKEENTRY 271 | |
| 877 | #define WLC_SET_WAKEENTRY 272 | |
| 878 | #define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */ | |
| 879 | #define WLC_NVOTPW 274 | |
| 880 | #define WLC_OTPW 275 | |
| 881 | #define WLC_IOV_BLOCK_GET 276 | |
| 882 | #define WLC_IOV_MODULES_GET 277 | |
| 883 | #define WLC_SOFT_RESET 278 | |
| 884 | #define WLC_GET_ALLOW_MODE 279 | |
| 885 | #define WLC_SET_ALLOW_MODE 280 | |
| 886 | #define WLC_GET_DESIRED_BSSID 281 | |
| 887 | #define WLC_SET_DESIRED_BSSID 282 | |
| 888 | #define WLC_DISASSOC_MYAP 283 | |
| 889 | #define WLC_GET_NBANDS 284 /* for Dongle EXT_STA support */ | |
| 890 | #define WLC_GET_BANDSTATES 285 /* for Dongle EXT_STA support */ | |
| 891 | #define WLC_GET_WLC_BSS_INFO 286 /* for Dongle EXT_STA support */ | |
| 892 | #define WLC_GET_ASSOC_INFO 287 /* for Dongle EXT_STA support */ | |
| 893 | #define WLC_GET_OID_PHY 288 /* for Dongle EXT_STA support */ | |
| 894 | #define WLC_SET_OID_PHY 289 /* for Dongle EXT_STA support */ | |
| 895 | #define WLC_SET_ASSOC_TIME 290 /* for Dongle EXT_STA support */ | |
| 896 | #define WLC_GET_DESIRED_SSID 291 /* for Dongle EXT_STA support */ | |
| 897 | #define WLC_GET_CHANSPEC 292 /* for Dongle EXT_STA support */ | |
| 898 | #define WLC_GET_ASSOC_STATE 293 /* for Dongle EXT_STA support */ | |
| 899 | #define WLC_SET_PHY_STATE 294 /* for Dongle EXT_STA support */ | |
| 900 | #define WLC_GET_SCAN_PENDING 295 /* for Dongle EXT_STA support */ | |
| 901 | #define WLC_GET_SCANREQ_PENDING 296 /* for Dongle EXT_STA support */ | |
| 902 | #define WLC_GET_PREV_ROAM_REASON 297 /* for Dongle EXT_STA support */ | |
| 903 | #define WLC_SET_PREV_ROAM_REASON 298 /* for Dongle EXT_STA support */ | |
| 904 | #define WLC_GET_BANDSTATES_PI 299 /* for Dongle EXT_STA support */ | |
| 905 | #define WLC_GET_PHY_STATE 300 /* for Dongle EXT_STA support */ | |
| 906 | #define WLC_GET_BSS_WPA_RSN 301 /* for Dongle EXT_STA support */ | |
| 907 | #define WLC_GET_BSS_WPA2_RSN 302 /* for Dongle EXT_STA support */ | |
| 908 | #define WLC_GET_BSS_BCN_TS 303 /* for Dongle EXT_STA support */ | |
| 909 | #define WLC_GET_INT_DISASSOC 304 /* for Dongle EXT_STA support */ | |
| 910 | #define WLC_SET_NUM_PEERS 305 /* for Dongle EXT_STA support */ | |
| 911 | #define WLC_GET_NUM_BSS 306 /* for Dongle EXT_STA support */ | |
| 912 | #define WLC_PHY_SAMPLE_COLLECT 307 /* phy sample collect mode */ | |
| 913 | /* #define WLC_UM_PRIV 308 */ /* Deprecated: usermode driver */ | |
| 914 | #define WLC_GET_CMD 309 | |
| 915 | /* #define WLC_LAST 310 */ /* Never used - can be reused */ | |
| 916 | #define WLC_SET_INTERFERENCE_OVERRIDE_MODE 311 /* set inter mode override */ | |
| 917 | #define WLC_GET_INTERFERENCE_OVERRIDE_MODE 312 /* get inter mode override */ | |
| 918 | /* #define WLC_GET_WAI_RESTRICT 313 */ | |
| 919 | /* #define WLC_SET_WAI_RESTRICT 314 */ | |
| 920 | /* #define WLC_SET_WAI_REKEY 315 */ | |
| 921 | #define WLC_SET_NAT_CONFIG 316 /* for configuring NAT filter driver */ | |
| 922 | #define WLC_GET_NAT_STATE 317 | |
| 923 | #define WLC_GET_TXBF_RATESET 318 | |
| 924 | #define WLC_SET_TXBF_RATESET 319 | |
| 925 | #define WLC_SCAN_CQ 320 | |
| 926 | #define WLC_GET_RSSI_QDB 321 /* qdB portion of the RSSI */ | |
| 927 | #define WLC_DUMP_RATESET 322 | |
| 928 | #define WLC_ECHO 323 | |
| 965f77c4 RC |
929 | #define WLC_LAST 324 /* The last ioctl. Also push this |
| 930 | * number when adding new ioctls | |
| 931 | */ | |
| 932 | /* | |
| 933 | * Alert: | |
| 934 | * Duplicate a few definitions that irelay requires from epiioctl.h here | |
| 935 | * so caller doesn't have to include this file and epiioctl.h . | |
| 936 | * If this grows any more, it would be time to move these irelay-specific | |
| 937 | * definitions out of the epiioctl.h and into a separate driver common file. | |
| 938 | */ | |
| d2839953 RC |
939 | #define WLC_SPEC_FLAG 0x80000000 /* For some special IOCTL */ |
| 940 | #ifndef EPICTRL_COOKIE | |
| 941 | #define EPICTRL_COOKIE 0xABADCEDE | |
| 942 | #endif // endif | |
| 943 | ||
| 944 | /* vx wlc ioctl's offset */ | |
| 945 | #define CMN_IOCTL_OFF 0x180 | |
| 946 | ||
| 947 | /* | |
| 948 | * custom OID support | |
| 949 | * | |
| 950 | * 0xFF - implementation specific OID | |
| 951 | * 0xE4 - first byte of Broadcom PCI vendor ID | |
| 952 | * 0x14 - second byte of Broadcom PCI vendor ID | |
| 953 | * 0xXX - the custom OID number | |
| 954 | */ | |
| 955 | ||
| 956 | /* begin 0x1f values beyond the start of the ET driver range. */ | |
| 957 | #define WL_OID_BASE 0xFFE41420 | |
| 958 | ||
| 959 | /* NDIS overrides */ | |
| 960 | #define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) | |
| 961 | #define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK) | |
| 962 | #define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK) | |
| 963 | #define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH) | |
| 964 | #define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS) | |
| 965 | #define OID_LEGACY_LINK_BEHAVIOR (WL_OID_BASE + WLC_LEGACY_LINK_BEHAVIOR) | |
| 966 | #define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM) | |
| 967 | ||
| 968 | /* EXT_STA Dongle suuport */ | |
| 969 | #define OID_STA_CHANSPEC (WL_OID_BASE + WLC_GET_CHANSPEC) | |
| 970 | #define OID_STA_NBANDS (WL_OID_BASE + WLC_GET_NBANDS) | |
| 971 | #define OID_STA_GET_PHY (WL_OID_BASE + WLC_GET_OID_PHY) | |
| 972 | #define OID_STA_SET_PHY (WL_OID_BASE + WLC_SET_OID_PHY) | |
| 973 | #define OID_STA_ASSOC_TIME (WL_OID_BASE + WLC_SET_ASSOC_TIME) | |
| 974 | #define OID_STA_DESIRED_SSID (WL_OID_BASE + WLC_GET_DESIRED_SSID) | |
| 975 | #define OID_STA_SET_PHY_STATE (WL_OID_BASE + WLC_SET_PHY_STATE) | |
| 976 | #define OID_STA_SCAN_PENDING (WL_OID_BASE + WLC_GET_SCAN_PENDING) | |
| 977 | #define OID_STA_SCANREQ_PENDING (WL_OID_BASE + WLC_GET_SCANREQ_PENDING) | |
| 978 | #define OID_STA_GET_ROAM_REASON (WL_OID_BASE + WLC_GET_PREV_ROAM_REASON) | |
| 979 | #define OID_STA_SET_ROAM_REASON (WL_OID_BASE + WLC_SET_PREV_ROAM_REASON) | |
| 980 | #define OID_STA_GET_PHY_STATE (WL_OID_BASE + WLC_GET_PHY_STATE) | |
| 981 | #define OID_STA_INT_DISASSOC (WL_OID_BASE + WLC_GET_INT_DISASSOC) | |
| 982 | #define OID_STA_SET_NUM_PEERS (WL_OID_BASE + WLC_SET_NUM_PEERS) | |
| 983 | #define OID_STA_GET_NUM_BSS (WL_OID_BASE + WLC_GET_NUM_BSS) | |
| 984 | ||
| 985 | /* NAT filter driver support */ | |
| 986 | #define OID_NAT_SET_CONFIG (WL_OID_BASE + WLC_SET_NAT_CONFIG) | |
| 987 | #define OID_NAT_GET_STATE (WL_OID_BASE + WLC_GET_NAT_STATE) | |
| 988 | ||
| 989 | #define WL_DECRYPT_STATUS_SUCCESS 1 | |
| 990 | #define WL_DECRYPT_STATUS_FAILURE 2 | |
| 991 | #define WL_DECRYPT_STATUS_UNKNOWN 3 | |
| 992 | ||
| 993 | /* allows user-mode app to poll the status of USB image upgrade */ | |
| 994 | #define WLC_UPGRADE_SUCCESS 0 | |
| 995 | #define WLC_UPGRADE_PENDING 1 | |
| 996 | ||
| 997 | /* WLC_GET_AUTH, WLC_SET_AUTH values */ | |
| 998 | #define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */ | |
| 999 | #define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */ | |
| 1000 | #define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */ | |
| 1001 | #define WL_AUTH_FILS_SHARED 4 /* d11 fils shared key authentication */ | |
| 1002 | #define WL_AUTH_FILS_SHARED_PFS 5 /* d11 fils shared key w/ pfs authentication */ | |
| 1003 | #define WL_AUTH_FILS_PUBLIC 6 /* d11 fils public key authentication */ | |
| 1004 | ||
| 1005 | /* a large TX Power as an init value to factor out of MIN() calculations, | |
| 1006 | * keep low enough to fit in an int8, units are .25 dBm | |
| 1007 | */ | |
| 1008 | #define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */ | |
| 1009 | ||
| 1010 | /* "diag" iovar argument and error code */ | |
| 1011 | #define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */ | |
| 1012 | #define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */ | |
| 1013 | #define WL_DIAG_MEMORY 3 /* d11 memory test */ | |
| 1014 | #define WL_DIAG_LED 4 /* LED test */ | |
| 1015 | #define WL_DIAG_REG 5 /* d11/phy register test */ | |
| 1016 | #define WL_DIAG_SROM 6 /* srom read/crc test */ | |
| 1017 | #define WL_DIAG_DMA 7 /* DMA test */ | |
| 1018 | #define WL_DIAG_LOOPBACK_EXT 8 /* enhenced d11 loopback data test */ | |
| 1019 | ||
| 1020 | #define WL_DIAGERR_SUCCESS 0 | |
| 1021 | #define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */ | |
| 1022 | #define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */ | |
| 1023 | #define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */ | |
| 1024 | #define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */ | |
| 1025 | #define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */ | |
| 1026 | #define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */ | |
| 1027 | #define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */ | |
| 1028 | #define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */ | |
| 1029 | #define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */ | |
| 1030 | #define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */ | |
| 1031 | ||
| 1032 | #define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */ | |
| 1033 | #define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */ | |
| 1034 | ||
| 1035 | /* band types */ | |
| 1036 | #define WLC_BAND_AUTO 0 /* auto-select */ | |
| 1037 | #define WLC_BAND_5G 1 /* 5 Ghz */ | |
| 1038 | #define WLC_BAND_2G 2 /* 2.4 Ghz */ | |
| 1039 | #define WLC_BAND_ALL 3 /* all bands */ | |
| 1040 | #define WLC_BAND_6G 4 /* 6 Ghz */ | |
| 1041 | #define WLC_BAND_INVALID -1 /* Invalid band */ | |
| 1042 | ||
| 1043 | /* band range returned by band_range iovar */ | |
| 1044 | #define WL_CHAN_FREQ_RANGE_2G 0 | |
| 1045 | #define WL_CHAN_FREQ_RANGE_5GL 1 | |
| 1046 | #define WL_CHAN_FREQ_RANGE_5GM 2 | |
| 1047 | #define WL_CHAN_FREQ_RANGE_5GH 3 | |
| 1048 | ||
| 1049 | #define WL_CHAN_FREQ_RANGE_5GLL_5BAND 4 | |
| 1050 | #define WL_CHAN_FREQ_RANGE_5GLH_5BAND 5 | |
| 1051 | #define WL_CHAN_FREQ_RANGE_5GML_5BAND 6 | |
| 1052 | #define WL_CHAN_FREQ_RANGE_5GMH_5BAND 7 | |
| 1053 | #define WL_CHAN_FREQ_RANGE_5GH_5BAND 8 | |
| 1054 | ||
| 1055 | #define WL_CHAN_FREQ_RANGE_5G_BAND0 1 | |
| 1056 | #define WL_CHAN_FREQ_RANGE_5G_BAND1 2 | |
| 1057 | #define WL_CHAN_FREQ_RANGE_5G_BAND2 3 | |
| 1058 | #define WL_CHAN_FREQ_RANGE_5G_BAND3 4 | |
| 1059 | #define WL_CHAN_FREQ_RANGE_5G_4BAND 5 | |
| 1060 | ||
| 1061 | /* SROM12 */ | |
| 1062 | #define WL_CHAN_FREQ_RANGE_5G_BAND4 5 | |
| 1063 | #define WL_CHAN_FREQ_RANGE_2G_40 6 | |
| 1064 | #define WL_CHAN_FREQ_RANGE_5G_BAND0_40 7 | |
| 1065 | #define WL_CHAN_FREQ_RANGE_5G_BAND1_40 8 | |
| 1066 | #define WL_CHAN_FREQ_RANGE_5G_BAND2_40 9 | |
| 1067 | #define WL_CHAN_FREQ_RANGE_5G_BAND3_40 10 | |
| 1068 | #define WL_CHAN_FREQ_RANGE_5G_BAND4_40 11 | |
| 1069 | #define WL_CHAN_FREQ_RANGE_5G_BAND0_80 12 | |
| 1070 | #define WL_CHAN_FREQ_RANGE_5G_BAND1_80 13 | |
| 1071 | #define WL_CHAN_FREQ_RANGE_5G_BAND2_80 14 | |
| 1072 | #define WL_CHAN_FREQ_RANGE_5G_BAND3_80 15 | |
| 1073 | #define WL_CHAN_FREQ_RANGE_5G_BAND4_80 16 | |
| 1074 | ||
| 1075 | #define WL_CHAN_FREQ_RANGE_5G_5BAND 18 | |
| 1076 | #define WL_CHAN_FREQ_RANGE_5G_5BAND_40 19 | |
| 1077 | #define WL_CHAN_FREQ_RANGE_5G_5BAND_80 20 | |
| 1078 | ||
| 1079 | #define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ | |
| 1080 | #define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ | |
| 1081 | #define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ | |
| 1082 | ||
| 1083 | /* | |
| 1084 | * 54g modes (basic bits may still be overridden) | |
| 1085 | * | |
| 1086 | * GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11 | |
| 1087 | * Preamble: Long | |
| 1088 | * Shortslot: Off | |
| 1089 | * GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 | |
| 1090 | * Extended Rateset: 6, 9, 12, 48 | |
| 1091 | * Preamble: Long | |
| 1092 | * Shortslot: Auto | |
| 1093 | * GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 | |
| 1094 | * Extended Rateset: 6b, 9, 12b, 48 | |
| 1095 | * Preamble: Short required | |
| 1096 | * Shortslot: Auto | |
| 1097 | * GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 | |
| 1098 | * Extended Rateset: 6, 9, 12, 48 | |
| 1099 | * Preamble: Long | |
| 1100 | * Shortslot: On | |
| 1101 | * GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 | |
| 1102 | * Preamble: Short required | |
| 1103 | * Shortslot: On and required | |
| 1104 | * GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b | |
| 1105 | * Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 | |
| 1106 | * Preamble: Long | |
| 1107 | * Shortslot: Auto | |
| 1108 | */ | |
| 1109 | #define GMODE_LEGACY_B 0 | |
| 1110 | #define GMODE_AUTO 1 | |
| 1111 | #define GMODE_ONLY 2 | |
| 1112 | #define GMODE_B_DEFERRED 3 | |
| 1113 | #define GMODE_PERFORMANCE 4 | |
| 1114 | #define GMODE_LRS 5 | |
| 1115 | #define GMODE_MAX 6 | |
| 1116 | ||
| 1117 | /* values for PLCPHdr_override */ | |
| 1118 | #define WLC_PLCP_AUTO -1 | |
| 1119 | #define WLC_PLCP_SHORT 0 | |
| 1120 | #define WLC_PLCP_LONG 1 | |
| 1121 | ||
| 1122 | /* values for g_protection_override and n_protection_override */ | |
| 1123 | #define WLC_PROTECTION_AUTO -1 | |
| 1124 | #define WLC_PROTECTION_OFF 0 | |
| 1125 | #define WLC_PROTECTION_ON 1 | |
| 1126 | #define WLC_PROTECTION_MMHDR_ONLY 2 | |
| 1127 | #define WLC_PROTECTION_CTS_ONLY 3 | |
| 1128 | ||
| 1129 | /* values for g_protection_control and n_protection_control */ | |
| 1130 | #define WLC_PROTECTION_CTL_OFF 0 | |
| 1131 | #define WLC_PROTECTION_CTL_LOCAL 1 | |
| 1132 | #define WLC_PROTECTION_CTL_OVERLAP 2 | |
| 1133 | ||
| 1134 | /* values for n_protection */ | |
| 1135 | #define WLC_N_PROTECTION_OFF 0 | |
| 1136 | #define WLC_N_PROTECTION_OPTIONAL 1 | |
| 1137 | #define WLC_N_PROTECTION_20IN40 2 | |
| 1138 | #define WLC_N_PROTECTION_MIXEDMODE 3 | |
| 1139 | ||
| 1140 | /* values for n_preamble_type */ | |
| 1141 | #define WLC_N_PREAMBLE_MIXEDMODE 0 | |
| 1142 | #define WLC_N_PREAMBLE_GF 1 | |
| 1143 | #define WLC_N_PREAMBLE_GF_BRCM 2 | |
| 1144 | ||
| 1145 | /* values for band specific 40MHz capabilities (deprecated) */ | |
| 1146 | #define WLC_N_BW_20ALL 0 | |
| 1147 | #define WLC_N_BW_40ALL 1 | |
| 1148 | #define WLC_N_BW_20IN2G_40IN5G 2 | |
| 1149 | ||
| 1150 | #define WLC_BW_20MHZ_BIT (1<<0) | |
| 1151 | #define WLC_BW_40MHZ_BIT (1<<1) | |
| 1152 | #define WLC_BW_80MHZ_BIT (1<<2) | |
| 1153 | #define WLC_BW_160MHZ_BIT (1<<3) | |
| 1154 | #define WLC_BW_10MHZ_BIT (1<<4) | |
| 1155 | #define WLC_BW_5MHZ_BIT (1<<5) | |
| 1156 | #define WLC_BW_2P5MHZ_BIT (1<<6) | |
| 1157 | /* Bandwidth capabilities */ | |
| 1158 | #define WLC_BW_CAP_20MHZ (WLC_BW_20MHZ_BIT) | |
| 1159 | #define WLC_BW_CAP_40MHZ (WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) | |
| 1160 | #define WLC_BW_CAP_80MHZ (WLC_BW_80MHZ_BIT|WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) | |
| 1161 | #define WLC_BW_CAP_160MHZ (WLC_BW_160MHZ_BIT|WLC_BW_80MHZ_BIT| \ | |
| 1162 | WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) | |
| 1163 | #define WLC_BW_CAP_2P5MHZ (WLC_BW_2P5MHZ_BIT) | |
| 1164 | #define WLC_BW_CAP_5MHZ (WLC_BW_5MHZ_BIT) | |
| 1165 | #define WLC_BW_CAP_10MHZ (WLC_BW_10MHZ_BIT) | |
| 1166 | #define WLC_BW_CAP_UNRESTRICTED 0xFF | |
| 1167 | ||
| 1168 | #define WL_BW_CAP_20MHZ(bw_cap) (((bw_cap) & WLC_BW_20MHZ_BIT) ? TRUE : FALSE) | |
| 1169 | #define WL_BW_CAP_40MHZ(bw_cap) (((bw_cap) & WLC_BW_40MHZ_BIT) ? TRUE : FALSE) | |
| 1170 | #define WL_BW_CAP_80MHZ(bw_cap) (((bw_cap) & WLC_BW_80MHZ_BIT) ? TRUE : FALSE) | |
| 1171 | #define WL_BW_CAP_160MHZ(bw_cap)(((bw_cap) & WLC_BW_160MHZ_BIT) ? TRUE : FALSE) | |
| 1172 | #define WL_BW_CAP_2P5MHZ(bw_cap)(((bw_cap) & WLC_BW_2P5MHZ_BIT) ? TRUE : FALSE) | |
| 1173 | #define WL_BW_CAP_5MHZ(bw_cap) (((bw_cap) & WLC_BW_5MHZ_BIT) ? TRUE : FALSE) | |
| 1174 | #define WL_BW_CAP_10MHZ(bw_cap) (((bw_cap) & WLC_BW_10MHZ_BIT) ? TRUE : FALSE) | |
| 1175 | /* values to force tx/rx chain */ | |
| 1176 | #define WLC_N_TXRX_CHAIN0 0 | |
| 1177 | #define WLC_N_TXRX_CHAIN1 1 | |
| 1178 | ||
| 1179 | /* bitflags for SGI support (sgi_rx iovar) */ | |
| 1180 | #define WLC_N_SGI_20 0x01 | |
| 1181 | #define WLC_N_SGI_40 0x02 | |
| 1182 | #define WLC_VHT_SGI_80 0x04 | |
| 1183 | #define WLC_VHT_SGI_160 0x08 | |
| 1184 | ||
| 1185 | /* when sgi_tx==WLC_SGI_ALL, bypass rate selection, enable sgi for all mcs */ | |
| 1186 | #define WLC_SGI_ALL 0x02 | |
| 1187 | ||
| 1188 | #define LISTEN_INTERVAL 10 | |
| 1189 | /* interference mitigation options */ | |
| 1190 | #define INTERFERE_OVRRIDE_OFF -1 /* interference override off */ | |
| 1191 | #define INTERFERE_NONE 0 /* off */ | |
| 1192 | #define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ | |
| 1193 | #define WLAN_MANUAL 2 /* ACI: no auto detection */ | |
| 1194 | #define WLAN_AUTO 3 /* ACI: auto detect */ | |
| 1195 | #define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */ | |
| 1196 | #define AUTO_ACTIVE (1 << 7) /* Auto is currently active */ | |
| 1197 | ||
| 1198 | /* interfernece mode bit-masks (ACPHY) */ | |
| 1199 | #define ACPHY_ACI_GLITCHBASED_DESENSE 1 /* bit 0 */ | |
| 1200 | #define ACPHY_ACI_HWACI_PKTGAINLMT 2 /* bit 1 */ | |
| 1201 | #define ACPHY_ACI_W2NB_PKTGAINLMT 4 /* bit 2 */ | |
| 1202 | #define ACPHY_ACI_PREEMPTION 8 /* bit 3 */ | |
| 1203 | #define ACPHY_HWACI_MITIGATION 16 /* bit 4 */ | |
| 1204 | #define ACPHY_LPD_PREEMPTION 32 /* bit 5 */ | |
| 1205 | #define ACPHY_HWOBSS_MITIGATION 64 /* bit 6 */ | |
| 1206 | #define ACPHY_ACI_MAX_MODE 127 | |
| 1207 | ||
| 1208 | /* AP environment */ | |
| 1209 | #define AP_ENV_DETECT_NOT_USED 0 /* We aren't using AP environment detection */ | |
| 1210 | #define AP_ENV_DENSE 1 /* "Corporate" or other AP dense environment */ | |
| 1211 | #define AP_ENV_SPARSE 2 /* "Home" or other sparse environment */ | |
| 1212 | #define AP_ENV_INDETERMINATE 3 /* AP environment hasn't been identified */ | |
| 1213 | ||
| 1214 | #define TRIGGER_NOW 0 | |
| 1215 | #define TRIGGER_CRS 0x01 | |
| 1216 | #define TRIGGER_CRSDEASSERT 0x02 | |
| 1217 | #define TRIGGER_GOODFCS 0x04 | |
| 1218 | #define TRIGGER_BADFCS 0x08 | |
| 1219 | #define TRIGGER_BADPLCP 0x10 | |
| 1220 | #define TRIGGER_CRSGLITCH 0x20 | |
| 965f77c4 | 1221 | #define TRIGGER_ASYNC 0x40 |
| d2839953 RC |
1222 | |
| 1223 | #define WL_SAMPLEDATA_HEADER_TYPE 1 | |
| 1224 | #define WL_SAMPLEDATA_HEADER_SIZE 80 /* sample collect header size (bytes) */ | |
| 1225 | #define WL_SAMPLEDATA_TYPE 2 | |
| 1226 | #define WL_SAMPLEDATA_SEQ 0xff /* sequence # */ | |
| 1227 | #define WL_SAMPLEDATA_MORE_DATA 0x100 /* more data mask */ | |
| 1228 | ||
| 1229 | /* WL_OTA START */ | |
| 1230 | #define WL_OTA_ARG_PARSE_BLK_SIZE 1200 | |
| 1231 | #define WL_OTA_TEST_MAX_NUM_RATE 30 | |
| 1232 | #define WL_OTA_TEST_MAX_NUM_SEQ 100 | |
| 1233 | #define WL_OTA_TEST_MAX_NUM_RSSI 85 | |
| 1234 | #define WL_THRESHOLD_LO_BAND 70 /* range from 5250MHz - 5350MHz */ | |
| 1235 | ||
| 1236 | /* radar iovar SET defines */ | |
| 1237 | #define WL_RADAR_DETECTOR_OFF 0 /* radar detector off */ | |
| 1238 | #define WL_RADAR_DETECTOR_ON 1 /* radar detector on */ | |
| 1239 | #define WL_RADAR_SIMULATED 2 /* force radar detector to declare | |
| 1240 | * detection once | |
| 1241 | */ | |
| 1242 | #define WL_RADAR_SIMULATED_SC 3 /* force radar detector to declare | |
| 1243 | * detection once on scan core | |
| 1244 | * if available and active | |
| 1245 | */ | |
| 1246 | #define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */ | |
| 1247 | #define WL_ANT_RX_MAX 2 /* max 2 receive antennas */ | |
| 1248 | #define WL_ANT_HT_RX_MAX 4 /* max 4 receive antennas/cores */ | |
| 1249 | #define WL_ANT_IDX_1 0 /* antenna index 1 */ | |
| 1250 | #define WL_ANT_IDX_2 1 /* antenna index 2 */ | |
| 1251 | ||
| 1252 | #ifndef WL_RSSI_ANT_MAX | |
| 1253 | #define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ | |
| 1254 | #elif WL_RSSI_ANT_MAX != 4 | |
| 1255 | #error "WL_RSSI_ANT_MAX does not match" | |
| 1256 | #endif // endif | |
| 1257 | ||
| 1258 | /* dfs_status iovar-related defines */ | |
| 1259 | ||
| 1260 | /* cac - channel availability check, | |
| 1261 | * ism - in-service monitoring | |
| 1262 | * csa - channel switching announcement | |
| 1263 | */ | |
| 1264 | ||
| 1265 | /* cac state values */ | |
| 1266 | #define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */ | |
| 1267 | #define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */ | |
| 1268 | #define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */ | |
| 1269 | #define WL_DFS_CACSTATE_CSA 3 /* csa */ | |
| 1270 | #define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */ | |
| 1271 | #define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */ | |
| 1272 | #define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */ | |
| 1273 | #define WL_DFS_CACSTATES 7 /* this many states exist */ | |
| 1274 | ||
| 1275 | /* Defines used with channel_bandwidth for curpower */ | |
| 1276 | #define WL_BW_20MHZ 0 | |
| 1277 | #define WL_BW_40MHZ 1 | |
| 1278 | #define WL_BW_80MHZ 2 | |
| 1279 | #define WL_BW_160MHZ 3 | |
| 1280 | #define WL_BW_8080MHZ 4 | |
| 1281 | #define WL_BW_2P5MHZ 5 | |
| 1282 | #define WL_BW_5MHZ 6 | |
| 1283 | #define WL_BW_10MHZ 7 | |
| 1284 | ||
| 1285 | /* tx_power_t.flags bits */ | |
| 1286 | #define WL_TX_POWER_F_ENABLED 1 | |
| 1287 | #define WL_TX_POWER_F_HW 2 | |
| 1288 | #define WL_TX_POWER_F_MIMO 4 | |
| 1289 | #define WL_TX_POWER_F_SISO 8 | |
| 1290 | #define WL_TX_POWER_F_HT 0x10 | |
| 1291 | #define WL_TX_POWER_F_VHT 0x20 | |
| 1292 | #define WL_TX_POWER_F_OPENLOOP 0x40 | |
| 1293 | #define WL_TX_POWER_F_PROP11NRATES 0x80 | |
| 1294 | #define WL_TX_POWER_F_UNIT_QDBM 0x100 | |
| 1295 | #define WL_TX_POWER_F_TXCAP 0x200 | |
| 965f77c4 RC |
1296 | #define WL_TX_POWER_F_HE 0x400 |
| 1297 | #define WL_TX_POWER_F_RU_RATE 0x800 | |
| 1298 | ||
| d2839953 RC |
1299 | /* Message levels */ |
| 1300 | #define WL_ERROR_VAL 0x00000001 | |
| 1301 | #define WL_TRACE_VAL 0x00000002 | |
| 1302 | #define WL_PRHDRS_VAL 0x00000004 | |
| 1303 | #define WL_PRPKT_VAL 0x00000008 | |
| 1304 | #define WL_INFORM_VAL 0x00000010 | |
| 1305 | #define WL_TMP_VAL 0x00000020 | |
| 1306 | #define WL_OID_VAL 0x00000040 | |
| 1307 | #define WL_RATE_VAL 0x00000080 | |
| 1308 | #define WL_ASSOC_VAL 0x00000100 | |
| 1309 | #define WL_PRUSR_VAL 0x00000200 | |
| 1310 | #define WL_PS_VAL 0x00000400 | |
| 1311 | #define WL_TXPWR_VAL 0x00000000 /* retired in TOT on 6/10/2009 */ | |
| 965f77c4 | 1312 | #define WL_MODE_SWITCH_VAL 0x00000800 /* Using retired TXPWR val */ |
| d2839953 RC |
1313 | #define WL_PORT_VAL 0x00001000 |
| 1314 | #define WL_DUAL_VAL 0x00002000 | |
| 1315 | #define WL_WSEC_VAL 0x00004000 | |
| 1316 | #define WL_WSEC_DUMP_VAL 0x00008000 | |
| 1317 | #define WL_LOG_VAL 0x00010000 | |
| 1318 | #define WL_NRSSI_VAL 0x00000000 /* retired in TOT on 6/10/2009 */ | |
| 1319 | #define WL_BCNTRIM_VAL 0x00020000 /* Using retired NRSSI VAL */ | |
| 1320 | #define WL_LOFT_VAL 0x00000000 /* retired in TOT on 6/10/2009 */ | |
| 965f77c4 | 1321 | #define WL_PFN_VAL 0x00040000 /* Using retired LOFT_VAL */ |
| d2839953 | 1322 | #define WL_REGULATORY_VAL 0x00080000 |
| 965f77c4 | 1323 | #define WL_CSA_VAL 0x00080000 /* Reusing REGULATORY_VAL due to lackof bits */ |
| d2839953 RC |
1324 | #define WL_TAF_VAL 0x00100000 |
| 1325 | #define WL_RADAR_VAL 0x00000000 /* retired in TOT on 6/10/2009 */ | |
| 1326 | #define WL_WDI_VAL 0x00200000 /* Using retired WL_RADAR_VAL VAL */ | |
| 1327 | #define WL_MPC_VAL 0x00400000 | |
| 1328 | #define WL_APSTA_VAL 0x00800000 | |
| 1329 | #define WL_DFS_VAL 0x01000000 | |
| 1330 | #define WL_BA_VAL 0x00000000 /* retired in TOT on 6/14/2010 */ | |
| 1331 | #define WL_MUMIMO_VAL 0x02000000 /* Using retired WL_BA_VAL */ | |
| 1332 | #define WL_ACI_VAL 0x04000000 | |
| 1333 | #define WL_PRMAC_VAL 0x04000000 | |
| 1334 | #define WL_MBSS_VAL 0x04000000 | |
| 1335 | #define WL_CAC_VAL 0x08000000 | |
| 1336 | #define WL_AMSDU_VAL 0x10000000 | |
| 1337 | #define WL_AMPDU_VAL 0x20000000 | |
| 1338 | #define WL_FFPLD_VAL 0x40000000 | |
| 1339 | #define WL_ROAM_EXP_VAL 0x80000000 | |
| 1340 | ||
| 1341 | /* wl_msg_level is full. For new bits take the next one and AND with | |
| 1342 | * wl_msg_level2 in wl_dbg.h | |
| 1343 | */ | |
| 1344 | #define WL_DPT_VAL 0x00000001 | |
| 1345 | /* re-using WL_DPT_VAL */ | |
| 1346 | /* re-using WL_MESH_VAL */ | |
| 1347 | #define WL_NATOE_VAL 0x00000001 | |
| 1348 | #define WL_MESH_VAL 0x00000001 | |
| 1349 | #define WL_SCAN_VAL 0x00000002 | |
| 1350 | #define WL_WOWL_VAL 0x00000004 | |
| 1351 | #define WL_COEX_VAL 0x00000008 | |
| 1352 | #define WL_RTDC_VAL 0x00000010 | |
| 1353 | #define WL_PROTO_VAL 0x00000020 | |
| 1354 | #define WL_SWDIV_VAL 0x00000040 | |
| 1355 | #define WL_CHANINT_VAL 0x00000080 | |
| 1356 | #define WL_WMF_VAL 0x00000100 | |
| 1357 | #define WL_P2P_VAL 0x00000200 | |
| 1358 | #define WL_ITFR_VAL 0x00000400 | |
| 1359 | #define WL_MCHAN_VAL 0x00000800 | |
| 1360 | #define WL_TDLS_VAL 0x00001000 | |
| 1361 | #define WL_MCNX_VAL 0x00002000 | |
| 1362 | #define WL_PROT_VAL 0x00004000 | |
| d2839953 RC |
1363 | #define WL_TSO_VAL 0x00010000 |
| 1364 | #define WL_TRF_MGMT_VAL 0x00020000 | |
| 1365 | #define WL_LPC_VAL 0x00040000 | |
| 1366 | #define WL_L2FILTER_VAL 0x00080000 | |
| 1367 | #define WL_TXBF_VAL 0x00100000 | |
| 1368 | #define WL_P2PO_VAL 0x00200000 | |
| 1369 | #define WL_TBTT_VAL 0x00400000 | |
| 1370 | #define WL_FBT_VAL 0x00800000 | |
| 965f77c4 | 1371 | #define WL_RRM_VAL 0x00800000 /* reuse */ |
| d2839953 RC |
1372 | #define WL_MQ_VAL 0x01000000 |
| 1373 | /* This level is currently used in Phoenix2 only */ | |
| 1374 | #define WL_SRSCAN_VAL 0x02000000 | |
| 1375 | #define WL_WNM_VAL 0x04000000 | |
| 1376 | /* re-using WL_WNM_VAL for MBO */ | |
| 1377 | #define WL_MBO_VAL 0x04000000 | |
| 1378 | /* re-using WL_SRSCAN_VAL */ | |
| 1379 | #define WL_RANDMAC_VAL 0x02000000 | |
| 1380 | #define WL_UNUSED_VAL 0x10000000 /* Was a duplicate for WL_LPC_VAL. Removed */ | |
| 1381 | #define WL_NET_DETECT_VAL 0x20000000 | |
| 1382 | #define WL_OCE_VAL 0x20000000 /* reuse */ | |
| 1383 | #define WL_PCIE_VAL 0x40000000 | |
| 1384 | #define WL_PMDUR_VAL 0x80000000 | |
| 1385 | /* use top-bit for WL_TIME_STAMP_VAL because this is a modifier | |
| 1386 | * rather than a message-type of its own | |
| 1387 | */ | |
| 1388 | #define WL_TIMESTAMP_VAL 0x80000000 | |
| 1389 | ||
| 1390 | /* wl_msg_level2 is full. For new bits take the next one and AND with | |
| 1391 | * wl_msg_level3 in wl_dbg.h | |
| 1392 | */ | |
| 1393 | #define WL_ASSOC_AP_VAL 0x00000001 | |
| 1394 | #define WL_FILS_VAL 0x00000002 | |
| 965f77c4 RC |
1395 | #define WL_LATENCY_VAL 0x00000004 |
| 1396 | #define WL_WBUS_VAL 0x00000008 | |
| d2839953 RC |
1397 | |
| 1398 | /* max # of leds supported by GPIO (gpio pin# == led index#) */ | |
| 1399 | #define WL_LED_NUMGPIO 32 /* gpio 0-31 */ | |
| 1400 | ||
| 1401 | /* led per-pin behaviors */ | |
| 1402 | #define WL_LED_OFF 0 /* always off */ | |
| 1403 | #define WL_LED_ON 1 /* always on */ | |
| 1404 | #define WL_LED_ACTIVITY 2 /* activity */ | |
| 1405 | #define WL_LED_RADIO 3 /* radio enabled */ | |
| 1406 | #define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ | |
| 1407 | #define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ | |
| 1408 | #define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ | |
| 965f77c4 RC |
1409 | #define WL_LED_WI1 7 /* wlan indicator 1 mode (legacy cust) */ |
| 1410 | #define WL_LED_WI2 8 /* wlan indicator 2 mode (legacy cust) */ | |
| 1411 | #define WL_LED_WI3 9 /* wlan indicator 3 mode (legacy cust) */ | |
| d2839953 RC |
1412 | #define WL_LED_ASSOC 10 /* associated state indicator */ |
| 1413 | #define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ | |
| 965f77c4 RC |
1414 | #define WL_LED_ASSOCACT 12 /* on associated; blink fast for activity */ |
| 1415 | #define WL_LED_WI4 13 /* wlan indicator 4 mode (legacy cust 5G) */ | |
| 1416 | #define WL_LED_WI5 14 /* wlan indicator 5 mode (legacy cust 2.4) */ | |
| d2839953 RC |
1417 | #define WL_LED_BLINKSLOW 15 /* blink slow */ |
| 1418 | #define WL_LED_BLINKMED 16 /* blink med */ | |
| 1419 | #define WL_LED_BLINKFAST 17 /* blink fast */ | |
| 1420 | #define WL_LED_BLINKCUSTOM 18 /* blink custom */ | |
| 965f77c4 | 1421 | #define WL_LED_BLINKPERIODIC 19 /* blink period (custom 1000ms / off 400ms) */ |
| d2839953 RC |
1422 | #define WL_LED_ASSOC_WITH_SEC 20 /* when connected with security */ |
| 1423 | /* keep on for 300 sec */ | |
| 1424 | #define WL_LED_START_OFF 21 /* off upon boot, could be turned on later */ | |
| 965f77c4 RC |
1425 | #define WL_LED_WI6 22 /* wlan indicator 6 mode legacy rtr 43526 5 */ |
| 1426 | #define WL_LED_WI7 23 /* wlan indicator 7 mode legacy rtr 43526 2.4 */ | |
| 1427 | #define WL_LED_WI8 24 /* wlan indicator 8 mode legacy rtr 43526 */ | |
| d2839953 RC |
1428 | #define WL_LED_NUMBEHAVIOR 25 |
| 1429 | ||
| 1430 | /* led behavior numeric value format */ | |
| 1431 | #define WL_LED_BEH_MASK 0x3f /* behavior mask */ | |
| 1432 | #define WL_LED_PMU_OVERRIDE 0x40 /* need to set PMU Override bit for the GPIO */ | |
| 1433 | #define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ | |
| 1434 | ||
| 1435 | /* number of bytes needed to define a proper bit mask for MAC event reporting */ | |
| 1436 | #define BCMIO_ROUNDUP(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) | |
| 1437 | #define BCMIO_NBBY 8 | |
| 965f77c4 | 1438 | #define WL_EVENTING_MASK_LEN (16+4) /* Don't increase this without wl review */ |
| d2839953 RC |
1439 | |
| 1440 | #define WL_EVENTING_MASK_EXT_LEN \ | |
| 1441 | MAX(WL_EVENTING_MASK_LEN, (ROUNDUP(WLC_E_LAST, NBBY)/NBBY)) | |
| 1442 | ||
| 1443 | /* join preference types */ | |
| 1444 | #define WL_JOIN_PREF_RSSI 1 /* by RSSI */ | |
| 1445 | #define WL_JOIN_PREF_WPA 2 /* by akm and ciphers */ | |
| 1446 | #define WL_JOIN_PREF_BAND 3 /* by 802.11 band */ | |
| 1447 | #define WL_JOIN_PREF_RSSI_DELTA 4 /* by 802.11 band only if RSSI delta condition matches */ | |
| 1448 | #define WL_JOIN_PREF_TRANS_PREF 5 /* defined by requesting AP */ | |
| 1449 | ||
| 1450 | /* band preference */ | |
| 1451 | #define WLJP_BAND_ASSOC_PREF 255 /* use what WLC_SET_ASSOC_PREFER ioctl specifies */ | |
| 1452 | ||
| 1453 | /* any multicast cipher suite */ | |
| 1454 | #define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00" | |
| 1455 | ||
| 1456 | /* 802.11h measurement types */ | |
| 1457 | #define WLC_MEASURE_TPC 1 | |
| 1458 | #define WLC_MEASURE_CHANNEL_BASIC 2 | |
| 1459 | #define WLC_MEASURE_CHANNEL_CCA 3 | |
| 1460 | #define WLC_MEASURE_CHANNEL_RPI 4 | |
| 1461 | ||
| 1462 | /* regulatory enforcement levels */ | |
| 1463 | #define SPECT_MNGMT_OFF 0 /* both 11h and 11d disabled */ | |
| 1464 | #define SPECT_MNGMT_LOOSE_11H 1 /* allow non-11h APs in scan lists */ | |
| 1465 | #define SPECT_MNGMT_STRICT_11H 2 /* prune out non-11h APs from scan list */ | |
| 1466 | #define SPECT_MNGMT_STRICT_11D 3 /* switch to 802.11D mode */ | |
| 1467 | /* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE | |
| 1468 | * adoption is done regardless of capability spectrum_management | |
| 1469 | */ | |
| 1470 | #define SPECT_MNGMT_LOOSE_11H_D 4 /* operation defined above */ | |
| 1471 | ||
| 1472 | /* bit position in per_chan_info; these depend on current country/regulatory domain */ | |
| 1473 | #define WL_CHAN_VALID_HW (1u << 0) /* valid with current HW */ | |
| 1474 | #define WL_CHAN_VALID_SW (1u << 1) /* valid with current country setting */ | |
| 1475 | #define WL_CHAN_BAND_5G (1u << 2) /* 5GHz-band channel */ | |
| 1476 | #define WL_CHAN_RADAR (1u << 3) /* radar sensitive channel */ | |
| 1477 | #define WL_CHAN_INACTIVE (1u << 4) /* temporarily inactive due to radar */ | |
| 1478 | #define WL_CHAN_PASSIVE (1u << 5) /* channel is in passive mode */ | |
| 1479 | #define WL_CHAN_RESTRICTED (1u << 6) /* restricted use channel */ | |
| 1480 | #define WL_CHAN_RADAR_EU_WEATHER (1u << 7) /* EU Radar weather channel. | |
| 1481 | * Implies an EU Radar channel. | |
| 1482 | */ | |
| 1483 | #define WL_CHAN_CLM_RESTRICTED (1u << 8) /* channel restricted in CLM (i.e. by default) */ | |
| 1484 | #define WL_CHAN_BAND_6G (1u << 9) /* 6GHz-band channel */ | |
| 1485 | #define WL_CHAN_OOS_SHIFT 24u /* shift for OOS field */ | |
| 1486 | #define WL_CHAN_OOS_MASK 0xFF000000u /* field specifying minutes remaining for this | |
| 1487 | * channel's out-of-service period due to radar | |
| 1488 | * detection | |
| 1489 | */ | |
| 1490 | ||
| 1491 | /* BTC mode used by "btc_mode" iovar */ | |
| 1492 | #define WL_BTC_DISABLE 0 /* disable BT coexistence */ | |
| 1493 | #define WL_BTC_FULLTDM 1 /* full TDM COEX */ | |
| 1494 | #define WL_BTC_ENABLE 1 /* full TDM COEX to maintain backward compatiblity */ | |
| 1495 | #define WL_BTC_PREMPT 2 /* full TDM COEX with preemption */ | |
| 1496 | #define WL_BTC_LITE 3 /* light weight coex for large isolation platform */ | |
| 1497 | #define WL_BTC_PARALLEL 4 /* BT and WLAN run in parallel with separate antenna */ | |
| 1498 | #define WL_BTC_HYBRID 5 /* hybrid coex, only ack is allowed to transmit in BT slot */ | |
| 1499 | #define WL_BTC_DEFAULT 8 /* set the default mode for the device */ | |
| 1500 | #define WL_INF_BTC_DISABLE 0 | |
| 1501 | #define WL_INF_BTC_ENABLE 1 | |
| 1502 | #define WL_INF_BTC_AUTO 3 | |
| 1503 | ||
| 1504 | /* BTC wire used by "btc_wire" iovar */ | |
| 1505 | #define WL_BTC_DEFWIRE 0 /* use default wire setting */ | |
| 1506 | #define WL_BTC_2WIRE 2 /* use 2-wire BTC */ | |
| 1507 | #define WL_BTC_3WIRE 3 /* use 3-wire BTC */ | |
| 1508 | #define WL_BTC_4WIRE 4 /* use 4-wire BTC */ | |
| 1509 | ||
| 1510 | /* BTC flags: BTC configuration that can be set by host */ | |
| 1511 | #define WL_BTC_FLAG_PREMPT (1 << 0) | |
| 1512 | #define WL_BTC_FLAG_BT_DEF (1 << 1) | |
| 1513 | #define WL_BTC_FLAG_ACTIVE_PROT (1 << 2) | |
| 1514 | #define WL_BTC_FLAG_SIM_RSP (1 << 3) | |
| 1515 | #define WL_BTC_FLAG_PS_PROTECT (1 << 4) | |
| 1516 | #define WL_BTC_FLAG_SIM_TX_LP (1 << 5) | |
| 1517 | #define WL_BTC_FLAG_ECI (1 << 6) | |
| 1518 | #define WL_BTC_FLAG_LIGHT (1 << 7) | |
| 1519 | #define WL_BTC_FLAG_PARALLEL (1 << 8) | |
| 1520 | ||
| 1521 | /* maximum channels returned by the get valid channels iovar */ | |
| 1522 | #define WL_NUMCHANNELS 64 | |
| 1523 | ||
| 965f77c4 RC |
1524 | /* Channels break down for 2G BAND |
| 1525 | * 2G 20MHz = 14 | |
| 1526 | * | |
| 1527 | * 2G 40MHz | |
| 1528 | * 9 * 2 = 18 | |
| 1529 | * | |
| 1530 | * 2G tot = 14 + 18 = 32 | |
| 1531 | * | |
| 1532 | * Channels Break down for 5G BAND | |
| 1533 | * 5G 20MHz | |
| 1534 | * 36-48 4 | |
| 1535 | * 52-64 4 | |
| 1536 | * 100-144 12 | |
| 1537 | * 149-161 4 | |
| 1538 | * 165 1 | |
| 1539 | * 5G 20 subtot = 25 | |
| 1540 | * | |
| 1541 | * 5G 40 12 * 2 = 24 | |
| 1542 | * 5G 80 6 * 4 = 24 | |
| 1543 | * 5G 160 2 * 8 = 16 | |
| 1544 | * | |
| 1545 | * 5G total = 25 + 24+ 24+ 16 = 89 | |
| 1546 | * | |
| 1547 | * TOTAL 2G and 5G | |
| 1548 | * 2G + 5G = (32 + 89) = 121 | |
| 1549 | * | |
| 1550 | * Channels Break down for 6G BAND | |
| 1551 | * 20MHz = 59 | |
| 1552 | * 40MHz 29 * 2 = 58 | |
| 1553 | * 80MHz 14 * 4 = 56 | |
| 1554 | * 160MHz 7 * 8 = 56 | |
| 1555 | * 6G total = 59 + 58 + 56 + 56 = 229 | |
| 1556 | * | |
| 1557 | * Toal WL_NUMCHANSPECS 2G/5G/6G | |
| 1558 | * total = 32 + 89 + 229 = 350 | |
| 1559 | * | |
| 1560 | * IF 5g 80+80 is defined | |
| 1561 | * 80MHz cf pairs are: | |
| 1562 | * 42 106 | |
| 1563 | * 42 122 | |
| 1564 | * 42 138 | |
| 1565 | * 42 155 | |
| 1566 | * 58 106 | |
| 1567 | * 58 122 | |
| 1568 | * 58 138 | |
| 1569 | * 58 155 | |
| 1570 | * 106 138 | |
| 1571 | * 106 155 | |
| 1572 | * 122 155 | |
| 1573 | * 138 155 | |
| 1574 | * | |
| 1575 | * | |
| 1576 | * 12 pairs * 8 primary channels = 96 | |
| 1577 | * TOTAL 2G + 5G + 5G (80 + 80) | |
| 1578 | * 32 + 89 + 96 = 217 | |
| 1579 | * | |
| 1580 | *TOTAL 2G + 5G + 5G (80 + 80) +6G (excluding 80 + 80) | |
| 1581 | * 32 + 89 + 96 + 229 = 446 | |
| 1582 | * | |
| 1583 | */ | |
| 1584 | #ifdef WL_BAND6G | |
| 1585 | /* max number of chanspecs (used by the iovar to calc. buf space) */ | |
| 1586 | #ifdef WL11AC_80P80 | |
| 1587 | #define WL_NUMCHANSPECS 446 | |
| 1588 | #else | |
| 1589 | #define WL_NUMCHANSPECS 350 | |
| 1590 | #endif // endif | |
| 1591 | #else | |
| d2839953 RC |
1592 | /* max number of chanspecs (used by the iovar to calc. buf space) */ |
| 1593 | #ifdef WL11AC_80P80 | |
| 1594 | #define WL_NUMCHANSPECS 206 | |
| 1595 | #else | |
| 1596 | #define WL_NUMCHANSPECS 110 | |
| 1597 | #endif // endif | |
| 965f77c4 | 1598 | #endif /* WL_BAND6G */ |
| d2839953 RC |
1599 | |
| 1600 | /* WDS link local endpoint WPA role */ | |
| 1601 | #define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ | |
| 1602 | #define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ | |
| 1603 | #define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ | |
| 1604 | ||
| 1605 | /* Base offset values */ | |
| 1606 | #define WL_PKT_FILTER_BASE_PKT 0 | |
| 1607 | #define WL_PKT_FILTER_BASE_END 1 | |
| 1608 | #define WL_PKT_FILTER_BASE_D11_H 2 /* May be removed */ | |
| 1609 | #define WL_PKT_FILTER_BASE_D11_D 3 /* May be removed */ | |
| 1610 | #define WL_PKT_FILTER_BASE_ETH_H 4 | |
| 1611 | #define WL_PKT_FILTER_BASE_ETH_D 5 | |
| 1612 | #define WL_PKT_FILTER_BASE_ARP_H 6 | |
| 1613 | #define WL_PKT_FILTER_BASE_ARP_D 7 /* May be removed */ | |
| 1614 | #define WL_PKT_FILTER_BASE_IP4_H 8 | |
| 1615 | #define WL_PKT_FILTER_BASE_IP4_D 9 | |
| 1616 | #define WL_PKT_FILTER_BASE_IP6_H 10 | |
| 1617 | #define WL_PKT_FILTER_BASE_IP6_D 11 | |
| 1618 | #define WL_PKT_FILTER_BASE_TCP_H 12 | |
| 1619 | #define WL_PKT_FILTER_BASE_TCP_D 13 /* May be removed */ | |
| 1620 | #define WL_PKT_FILTER_BASE_UDP_H 14 | |
| 1621 | #define WL_PKT_FILTER_BASE_UDP_D 15 | |
| 1622 | #define WL_PKT_FILTER_BASE_IP6_P 16 | |
| 1623 | #define WL_PKT_FILTER_BASE_COUNT 17 /* May be removed */ | |
| 1624 | ||
| 1625 | /* String mapping for bases that may be used by applications or debug */ | |
| 1626 | #define WL_PKT_FILTER_BASE_NAMES \ | |
| 1627 | { "START", WL_PKT_FILTER_BASE_PKT }, \ | |
| 1628 | { "END", WL_PKT_FILTER_BASE_END }, \ | |
| 1629 | { "ETH_H", WL_PKT_FILTER_BASE_ETH_H }, \ | |
| 1630 | { "ETH_D", WL_PKT_FILTER_BASE_ETH_D }, \ | |
| 1631 | { "D11_H", WL_PKT_FILTER_BASE_D11_H }, \ | |
| 1632 | { "D11_D", WL_PKT_FILTER_BASE_D11_D }, \ | |
| 1633 | { "ARP_H", WL_PKT_FILTER_BASE_ARP_H }, \ | |
| 1634 | { "IP4_H", WL_PKT_FILTER_BASE_IP4_H }, \ | |
| 1635 | { "IP4_D", WL_PKT_FILTER_BASE_IP4_D }, \ | |
| 1636 | { "IP6_H", WL_PKT_FILTER_BASE_IP6_H }, \ | |
| 1637 | { "IP6_D", WL_PKT_FILTER_BASE_IP6_D }, \ | |
| 1638 | { "IP6_P", WL_PKT_FILTER_BASE_IP6_P }, \ | |
| 1639 | { "TCP_H", WL_PKT_FILTER_BASE_TCP_H }, \ | |
| 1640 | { "TCP_D", WL_PKT_FILTER_BASE_TCP_D }, \ | |
| 1641 | { "UDP_H", WL_PKT_FILTER_BASE_UDP_H }, \ | |
| 1642 | { "UDP_D", WL_PKT_FILTER_BASE_UDP_D } | |
| 1643 | ||
| 1644 | /* Flags for a pattern list element */ | |
| 1645 | #define WL_PKT_FILTER_MFLAG_NEG 0x0001 | |
| 1646 | ||
| 1647 | /* | |
| 1648 | * Packet engine interface | |
| 1649 | */ | |
| 1650 | ||
| 1651 | #define WL_PKTENG_PER_TX_START 0x01 | |
| 1652 | #define WL_PKTENG_PER_TX_STOP 0x02 | |
| 1653 | #define WL_PKTENG_PER_RX_START 0x04 | |
| 1654 | #define WL_PKTENG_PER_RX_WITH_ACK_START 0x05 | |
| 1655 | #define WL_PKTENG_PER_TX_WITH_ACK_START 0x06 | |
| 1656 | #define WL_PKTENG_PER_RX_STOP 0x08 | |
| 1657 | #define WL_PKTENG_PER_RU_TX_START 0x09 | |
| 1658 | #define WL_PKTENG_PER_TRIG_TX_START 0x0a | |
| 1659 | #define WL_PKTENG_PER_MASK 0xff | |
| 1660 | ||
| 1661 | #define WL_PKTENG_SYNCHRONOUS 0x100 /* synchronous flag */ | |
| 1662 | #define WL_PKTENG_SYNCHRONOUS_UNBLK 0x200 /* synchronous unblock flag */ | |
| 1663 | #define WL_PKTENG_COLLECT 0x400 /* Save last Rx'ed packet */ | |
| 1664 | #ifdef PKTENG_LONGPKTSZ | |
| 1665 | /* max pktsz limit for pkteng */ | |
| 1666 | #define WL_PKTENG_MAXPKTSZ PKTENG_LONGPKTSZ | |
| 1667 | #else | |
| 1668 | #define WL_PKTENG_MAXPKTSZ 16384 | |
| 1669 | #endif // endif | |
| 1670 | ||
| 1671 | #define NUM_80211b_RATES 4 | |
| 1672 | #define NUM_80211ag_RATES 8 | |
| 1673 | #define NUM_80211n_RATES 32 | |
| 1674 | #define NUM_80211_RATES (NUM_80211b_RATES+NUM_80211ag_RATES+NUM_80211n_RATES) | |
| 1675 | ||
| 1676 | /* | |
| 1677 | * WOWL capability/override settings | |
| 1678 | */ | |
| 1679 | #define WL_WOWL_MAGIC (1 << 0) /* Wakeup on Magic packet */ | |
| 1680 | #define WL_WOWL_NET (1 << 1) /* Wakeup on Netpattern */ | |
| 1681 | #define WL_WOWL_DIS (1 << 2) /* Wakeup on loss-of-link due to Disassoc/Deauth */ | |
| 1682 | #define WL_WOWL_RETR (1 << 3) /* Wakeup on retrograde TSF */ | |
| 1683 | #define WL_WOWL_BCN (1 << 4) /* Wakeup on loss of beacon */ | |
| 1684 | #define WL_WOWL_TST (1 << 5) /* Wakeup after test */ | |
| 1685 | #define WL_WOWL_M1 (1 << 6) /* Wakeup after PTK refresh */ | |
| 1686 | #define WL_WOWL_EAPID (1 << 7) /* Wakeup after receipt of EAP-Identity Req */ | |
| 1687 | #define WL_WOWL_PME_GPIO (1 << 8) /* Wakeind via PME(0) or GPIO(1) */ | |
| 1688 | #define WL_WOWL_ULP_BAILOUT (1 << 8) /* wakeind via unknown pkt by basic ULP-offloads - | |
| 1689 | * WL_WOWL_ULP_BAILOUT - same as WL_WOWL_PME_GPIO used only for DONGLE BUILDS | |
| 1690 | */ | |
| 1691 | #define WL_WOWL_NEEDTKIP1 (1 << 9) /* need tkip phase 1 key to be updated by the driver */ | |
| 1692 | #define WL_WOWL_GTK_FAILURE (1 << 10) /* enable wakeup if GTK fails */ | |
| 1693 | #define WL_WOWL_EXTMAGPAT (1 << 11) /* support extended magic packets */ | |
| 1694 | #define WL_WOWL_ARPOFFLOAD (1 << 12) /* support ARP/NS/keepalive offloading */ | |
| 1695 | #define WL_WOWL_WPA2 (1 << 13) /* read protocol version for EAPOL frames */ | |
| 1696 | #define WL_WOWL_KEYROT (1 << 14) /* If the bit is set, use key rotaton */ | |
| 1697 | #define WL_WOWL_BCAST (1 << 15) /* If the bit is set, frm received was bcast frame */ | |
| 1698 | #define WL_WOWL_SCANOL (1 << 16) /* If the bit is set, scan offload is enabled */ | |
| 1699 | #define WL_WOWL_TCPKEEP_TIME (1 << 17) /* Wakeup on tcpkeep alive timeout */ | |
| 1700 | #define WL_WOWL_MDNS_CONFLICT (1 << 18) /* Wakeup on mDNS Conflict Resolution */ | |
| 1701 | #define WL_WOWL_MDNS_SERVICE (1 << 19) /* Wakeup on mDNS Service Connect */ | |
| 1702 | #define WL_WOWL_TCPKEEP_DATA (1 << 20) /* tcp keepalive got data */ | |
| 1703 | #define WL_WOWL_FW_HALT (1 << 21) /* Firmware died in wowl mode */ | |
| 1704 | #define WL_WOWL_ENAB_HWRADIO (1 << 22) /* Enable detection of radio button changes */ | |
| 1705 | #define WL_WOWL_MIC_FAIL (1 << 23) /* Offloads detected MIC failure(s) */ | |
| 1706 | #define WL_WOWL_UNASSOC (1 << 24) /* Wakeup in Unassociated state (Net/Magic Pattern) */ | |
| 1707 | #define WL_WOWL_SECURE (1 << 25) /* Wakeup if received matched secured pattern */ | |
| 1708 | #define WL_WOWL_EXCESS_WAKE (1 << 26) /* Excess wake */ | |
| 1709 | #define WL_WOWL_LINKDOWN (1 << 31) /* Link Down indication in WoWL mode */ | |
| 1710 | ||
| 1711 | #define WL_WOWL_TCPKEEP (1 << 20) /* temp copy to satisfy automerger */ | |
| 1712 | #define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */ | |
| 1713 | ||
| 1714 | #define WOWL_PATTEN_TYPE_ARP (1 << 0) /* ARP offload Pattern */ | |
| 1715 | #define WOWL_PATTEN_TYPE_NA (1 << 1) /* NA offload Pattern */ | |
| 1716 | ||
| 1717 | #define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */ | |
| 1718 | #define MAGIC_PKT_NUM_MAC_ADDRS 16 | |
| 1719 | ||
| 1720 | /* Overlap BSS Scan parameters default, minimum, maximum */ | |
| 1721 | #define WLC_OBSS_SCAN_PASSIVE_DWELL_DEFAULT 20 /* unit TU */ | |
| 1722 | #define WLC_OBSS_SCAN_PASSIVE_DWELL_MIN 5 /* unit TU */ | |
| 1723 | #define WLC_OBSS_SCAN_PASSIVE_DWELL_MAX 1000 /* unit TU */ | |
| 1724 | #define WLC_OBSS_SCAN_ACTIVE_DWELL_DEFAULT 10 /* unit TU */ | |
| 1725 | #define WLC_OBSS_SCAN_ACTIVE_DWELL_MIN 10 /* unit TU */ | |
| 1726 | #define WLC_OBSS_SCAN_ACTIVE_DWELL_MAX 1000 /* unit TU */ | |
| 1727 | #define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_DEFAULT 300 /* unit Sec */ | |
| 1728 | #define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MIN 10 /* unit Sec */ | |
| 1729 | #define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MAX 900 /* unit Sec */ | |
| 1730 | #define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_DEFAULT 5 | |
| 1731 | #define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MIN 5 | |
| 1732 | #define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MAX 100 | |
| 1733 | #define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_DEFAULT 200 /* unit TU */ | |
| 1734 | #define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MIN 200 /* unit TU */ | |
| 1735 | #define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */ | |
| 1736 | #define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_DEFAULT 20 /* unit TU */ | |
| 1737 | #define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MIN 20 /* unit TU */ | |
| 1738 | #define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */ | |
| 1739 | #define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_DEFAULT 25 /* unit percent */ | |
| 1740 | #define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MIN 0 /* unit percent */ | |
| 1741 | #define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MAX 100 /* unit percent */ | |
| 1742 | ||
| 1743 | #define WL_MIN_NUM_OBSS_SCAN_ARG 7 /* minimum number of arguments required for OBSS Scan */ | |
| 1744 | ||
| 1745 | #define WL_COEX_INFO_MASK 0x07 | |
| 1746 | #define WL_COEX_INFO_REQ 0x01 | |
| 1747 | #define WL_COEX_40MHZ_INTOLERANT 0x02 | |
| 1748 | #define WL_COEX_WIDTH20 0x04 | |
| 1749 | ||
| 1750 | #define WLC_RSSI_INVALID 0 /* invalid RSSI value */ | |
| 1751 | ||
| 1752 | #define MAX_RSSI_LEVELS 8 | |
| 1753 | ||
| 1754 | /* **** EXTLOG **** */ | |
| 1755 | #define EXTLOG_CUR_VER 0x0100 | |
| 1756 | ||
| 1757 | #define MAX_ARGSTR_LEN 18 /* At least big enough for storing ETHER_ADDR_STR_LEN */ | |
| 1758 | ||
| 1759 | /* log modules (bitmap) */ | |
| 1760 | #define LOG_MODULE_COMMON 0x0001 | |
| 1761 | #define LOG_MODULE_ASSOC 0x0002 | |
| 1762 | #define LOG_MODULE_EVENT 0x0004 | |
| 1763 | #define LOG_MODULE_MAX 3 /* Update when adding module */ | |
| 1764 | ||
| 1765 | /* log levels */ | |
| 1766 | #define WL_LOG_LEVEL_DISABLE 0 | |
| 1767 | #define WL_LOG_LEVEL_ERR 1 | |
| 1768 | #define WL_LOG_LEVEL_WARN 2 | |
| 1769 | #define WL_LOG_LEVEL_INFO 3 | |
| 1770 | #define WL_LOG_LEVEL_MAX WL_LOG_LEVEL_INFO /* Update when adding level */ | |
| 1771 | ||
| 1772 | /* flag */ | |
| 1773 | #define LOG_FLAG_EVENT 1 | |
| 1774 | ||
| 1775 | /* log arg_type */ | |
| 1776 | #define LOG_ARGTYPE_NULL 0 | |
| 1777 | #define LOG_ARGTYPE_STR 1 /* %s */ | |
| 1778 | #define LOG_ARGTYPE_INT 2 /* %d */ | |
| 1779 | #define LOG_ARGTYPE_INT_STR 3 /* %d...%s */ | |
| 1780 | #define LOG_ARGTYPE_STR_INT 4 /* %s...%d */ | |
| 1781 | ||
| 1782 | /* 802.11 Mgmt Packet flags */ | |
| 1783 | #define VNDR_IE_BEACON_FLAG 0x1 | |
| 1784 | #define VNDR_IE_PRBRSP_FLAG 0x2 | |
| 1785 | #define VNDR_IE_ASSOCRSP_FLAG 0x4 | |
| 1786 | #define VNDR_IE_AUTHRSP_FLAG 0x8 | |
| 1787 | #define VNDR_IE_PRBREQ_FLAG 0x10 | |
| 1788 | #define VNDR_IE_ASSOCREQ_FLAG 0x20 | |
| 1789 | #define VNDR_IE_IWAPID_FLAG 0x40 /* vendor IE in IW advertisement protocol ID field */ | |
| 1790 | #define VNDR_IE_AUTHREQ_FLAG 0x80 | |
| 1791 | #define VNDR_IE_CUSTOM_FLAG 0x100 /* allow custom IE id */ | |
| 1792 | #define VNDR_IE_DISASSOC_FLAG 0x200 | |
| 1793 | ||
| 1794 | #if defined(WLP2P) | |
| 1795 | /* P2P Action Frames flags (spec ordered) */ | |
| 1796 | #define VNDR_IE_GONREQ_FLAG 0x001000 | |
| 1797 | #define VNDR_IE_GONRSP_FLAG 0x002000 | |
| 1798 | #define VNDR_IE_GONCFM_FLAG 0x004000 | |
| 1799 | #define VNDR_IE_INVREQ_FLAG 0x008000 | |
| 1800 | #define VNDR_IE_INVRSP_FLAG 0x010000 | |
| 1801 | #define VNDR_IE_DISREQ_FLAG 0x020000 | |
| 1802 | #define VNDR_IE_DISRSP_FLAG 0x040000 | |
| 1803 | #define VNDR_IE_PRDREQ_FLAG 0x080000 | |
| 1804 | #define VNDR_IE_PRDRSP_FLAG 0x100000 | |
| 1805 | ||
| 1806 | #define VNDR_IE_P2PAF_SHIFT 12 | |
| 1807 | #endif /* WLP2P */ | |
| 1808 | ||
| 1809 | /* channel interference measurement (chanim) related defines */ | |
| 1810 | ||
| 1811 | /* chanim mode */ | |
| 1812 | #define CHANIM_DISABLE 0 /* disabled */ | |
| 1813 | #define CHANIM_DETECT 1 /* detection only */ | |
| 1814 | #define CHANIM_EXT 2 /* external state machine */ | |
| 1815 | #define CHANIM_ACT 3 /* full internal state machine, detect + act */ | |
| 1816 | #define CHANIM_MODE_MAX 4 | |
| 1817 | ||
| 1818 | /* define for apcs reason code */ | |
| 1819 | #define APCS_INIT 0 | |
| 1820 | #define APCS_IOCTL 1 | |
| 1821 | #define APCS_CHANIM 2 | |
| 1822 | #define APCS_CSTIMER 3 | |
| 1823 | #define APCS_TXDLY 5 | |
| 1824 | #define APCS_NONACSD 6 | |
| 1825 | #define APCS_DFS_REENTRY 7 | |
| 1826 | #define APCS_TXFAIL 8 | |
| 1827 | #define APCS_MAX 9 | |
| 1828 | ||
| 1829 | /* number of ACS record entries */ | |
| 1830 | #define CHANIM_ACS_RECORD 10 | |
| 1831 | ||
| 1832 | /* CHANIM */ | |
| 1833 | #define CCASTATS_TXDUR 0 | |
| 1834 | #define CCASTATS_INBSS 1 | |
| 1835 | #define CCASTATS_OBSS 2 | |
| 1836 | #define CCASTATS_NOCTG 3 | |
| 1837 | #define CCASTATS_NOPKT 4 | |
| 1838 | #define CCASTATS_DOZE 5 | |
| 1839 | #define CCASTATS_TXOP 6 | |
| 1840 | #define CCASTATS_GDTXDUR 7 | |
| 1841 | #define CCASTATS_BDTXDUR 8 | |
| 1842 | ||
| 1843 | #ifndef WLCHANIM_V2 | |
| 1844 | #define CCASTATS_MAX 9 | |
| 1845 | #else /* WLCHANIM_V2 */ | |
| 1846 | #define CCASTATS_MYRX 9 | |
| 1847 | #define CCASTATS_MAX 10 | |
| 1848 | #endif /* WLCHANIM_V2 */ | |
| 1849 | ||
| 1850 | #define WL_CHANIM_COUNT_ALL 0xff | |
| 1851 | #define WL_CHANIM_COUNT_ONE 0x1 | |
| 1852 | ||
| 1853 | /* ap tpc modes */ | |
| 1854 | #define AP_TPC_OFF 0 | |
| 1855 | #define AP_TPC_BSS_PWR 1 /* BSS power control */ | |
| 1856 | #define AP_TPC_AP_PWR 2 /* AP power control */ | |
| 1857 | #define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */ | |
| 1858 | #define AP_TPC_MAX_LINK_MARGIN 127 | |
| 1859 | ||
| 1860 | /* ap tpc modes */ | |
| 1861 | #define AP_TPC_OFF 0 | |
| 1862 | #define AP_TPC_BSS_PWR 1 /* BSS power control */ | |
| 1863 | #define AP_TPC_AP_PWR 2 /* AP power control */ | |
| 1864 | #define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */ | |
| 1865 | #define AP_TPC_MAX_LINK_MARGIN 127 | |
| 1866 | ||
| 1867 | /* state */ | |
| 1868 | #define WL_P2P_DISC_ST_SCAN 0 | |
| 1869 | #define WL_P2P_DISC_ST_LISTEN 1 | |
| 1870 | #define WL_P2P_DISC_ST_SEARCH 2 | |
| 1871 | ||
| 1872 | /* i/f type */ | |
| 1873 | #define WL_P2P_IF_CLIENT 0 | |
| 1874 | #define WL_P2P_IF_GO 1 | |
| 1875 | #define WL_P2P_IF_DYNBCN_GO 2 | |
| 1876 | #define WL_P2P_IF_DEV 3 | |
| 1877 | ||
| 1878 | /* p2p GO configuration */ | |
| 1879 | #define WL_P2P_ENABLE_CONF 1 /* configure */ | |
| 1880 | #define WL_P2P_DISABLE_CONF 0 /* un-configure */ | |
| 1881 | ||
| 1882 | /* count */ | |
| 1883 | #define WL_P2P_SCHED_RSVD 0 | |
| 1884 | #define WL_P2P_SCHED_REPEAT 255 /* anything > 255 will be treated as 255 */ | |
| 1885 | ||
| 1886 | #define WL_P2P_SCHED_FIXED_LEN 3 | |
| 1887 | ||
| 1888 | /* schedule type */ | |
| 1889 | #define WL_P2P_SCHED_TYPE_ABS 0 /* Scheduled Absence */ | |
| 1890 | #define WL_P2P_SCHED_TYPE_REQ_ABS 1 /* Requested Absence */ | |
| 1891 | ||
| 965f77c4 | 1892 | /* at some point we may need bitvec here (combination of actions) */ |
| d2839953 RC |
1893 | /* schedule action during absence periods (for WL_P2P_SCHED_ABS type) */ |
| 1894 | #define WL_P2P_SCHED_ACTION_NONE 0 /* no action */ | |
| 1895 | #define WL_P2P_SCHED_ACTION_DOZE 1 /* doze */ | |
| 1896 | /* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */ | |
| 1897 | #define WL_P2P_SCHED_ACTION_GOOFF 2 /* turn off GO beacon/prbrsp functions */ | |
| 1898 | /* schedule option - WL_P2P_SCHED_TYPE_XXX */ | |
| 1899 | #define WL_P2P_SCHED_ACTION_RESET 255 /* reset */ | |
| 1900 | ||
| 965f77c4 | 1901 | /* at some point we may need bitvec here (combination of options) */ |
| d2839953 RC |
1902 | /* schedule option - WL_P2P_SCHED_TYPE_ABS */ |
| 1903 | #define WL_P2P_SCHED_OPTION_NORMAL 0 /* normal start/interval/duration/count */ | |
| 1904 | #define WL_P2P_SCHED_OPTION_BCNPCT 1 /* percentage of beacon interval */ | |
| 1905 | /* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */ | |
| 1906 | #define WL_P2P_SCHED_OPTION_TSFOFS 2 /* normal start/internal/duration/count with | |
| 1907 | * start being an offset of the 'current' TSF | |
| 1908 | */ | |
| 1909 | ||
| 1910 | /* feature flags */ | |
| 1911 | #define WL_P2P_FEAT_GO_CSA (1 << 0) /* GO moves with the STA using CSA method */ | |
| 1912 | #define WL_P2P_FEAT_GO_NOLEGACY (1 << 1) /* GO does not probe respond to non-p2p probe | |
| 1913 | * requests | |
| 1914 | */ | |
| 1915 | #define WL_P2P_FEAT_RESTRICT_DEV_RESP (1 << 2) /* Restrict p2p dev interface from responding */ | |
| 1916 | ||
| 1917 | /* n-mode support capability */ | |
| 1918 | /* 2x2 includes both 1x1 & 2x2 devices | |
| 1919 | * reserved #define 2 for future when we want to separate 1x1 & 2x2 and | |
| 1920 | * control it independently | |
| 1921 | */ | |
| 1922 | #define WL_11N_2x2 1 | |
| 1923 | #define WL_11N_3x3 3 | |
| 1924 | #define WL_11N_4x4 4 | |
| 1925 | ||
| 1926 | /* define 11n feature disable flags */ | |
| 1927 | #define WLFEATURE_DISABLE_11N 0x00000001 | |
| 1928 | #define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002 | |
| 1929 | #define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004 | |
| 1930 | #define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008 | |
| 1931 | #define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010 | |
| 1932 | #define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020 | |
| 1933 | #define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040 | |
| 1934 | #define WLFEATURE_DISABLE_11N_GF 0x00000080 | |
| 1935 | ||
| d2839953 RC |
1936 | /* op code in nat_cfg */ |
| 1937 | #define NAT_OP_ENABLE 1 /* enable NAT on given interface */ | |
| 1938 | #define NAT_OP_DISABLE 2 /* disable NAT on given interface */ | |
| 1939 | #define NAT_OP_DISABLE_ALL 3 /* disable NAT on all interfaces */ | |
| 1940 | ||
| 1941 | /* NAT state */ | |
| 1942 | #define NAT_STATE_ENABLED 1 /* NAT is enabled */ | |
| 1943 | #define NAT_STATE_DISABLED 2 /* NAT is disabled */ | |
| 1944 | ||
| 1945 | #define CHANNEL_5G_LOW_START 36 /* 5G low (36..48) CDD enable/disable bit mask */ | |
| 1946 | #define CHANNEL_5G_MID_START 52 /* 5G mid (52..64) CDD enable/disable bit mask */ | |
| 1947 | #define CHANNEL_5G_HIGH_START 100 /* 5G high (100..140) CDD enable/disable bit mask */ | |
| 1948 | #define CHANNEL_5G_UPPER_START 149 /* 5G upper (149..161) CDD enable/disable bit mask */ | |
| 1949 | ||
| 1950 | /* D0 Coalescing */ | |
| 1951 | #define IPV4_ARP_FILTER 0x0001 | |
| 1952 | #define IPV4_NETBT_FILTER 0x0002 | |
| 1953 | #define IPV4_LLMNR_FILTER 0x0004 | |
| 1954 | #define IPV4_SSDP_FILTER 0x0008 | |
| 1955 | #define IPV4_WSD_FILTER 0x0010 | |
| 1956 | #define IPV6_NETBT_FILTER 0x0200 | |
| 1957 | #define IPV6_LLMNR_FILTER 0x0400 | |
| 1958 | #define IPV6_SSDP_FILTER 0x0800 | |
| 1959 | #define IPV6_WSD_FILTER 0x1000 | |
| 1960 | ||
| 1961 | /* Network Offload Engine */ | |
| 1962 | #define NWOE_OL_ENABLE 0x00000001 | |
| 1963 | ||
| 1964 | /* | |
| 1965 | * Traffic management structures/defines. | |
| 1966 | */ | |
| 1967 | ||
| 1968 | /* Traffic management bandwidth parameters */ | |
| 1969 | #define TRF_MGMT_MAX_PRIORITIES 3 | |
| 1970 | ||
| 1971 | #define TRF_MGMT_FLAG_ADD_DSCP 0x0001 /* Add DSCP to IP TOS field */ | |
| 1972 | #define TRF_MGMT_FLAG_DISABLE_SHAPING 0x0002 /* Don't shape traffic */ | |
| 1973 | #define TRF_MGMT_FLAG_MANAGE_LOCAL_TRAFFIC 0x0008 /* Manage traffic over our local subnet */ | |
| 1974 | #define TRF_MGMT_FLAG_FILTER_ON_MACADDR 0x0010 /* filter on MAC address */ | |
| 1975 | #define TRF_MGMT_FLAG_NO_RX 0x0020 /* do not apply fiters to rx packets */ | |
| 1976 | ||
| 1977 | #define TRF_FILTER_MAC_ADDR 0x0001 /* L2 filter use dst mac address for filtering */ | |
| 1978 | #define TRF_FILTER_IP_ADDR 0x0002 /* L3 filter use ip ddress for filtering */ | |
| 1979 | #define TRF_FILTER_L4 0x0004 /* L4 filter use tcp/udp for filtering */ | |
| 1980 | #define TRF_FILTER_DWM 0x0008 /* L3 filter use DSCP for filtering */ | |
| 1981 | #define TRF_FILTER_FAVORED 0x0010 /* Tag the packet FAVORED */ | |
| 1982 | ||
| 1983 | /* WNM/NPS subfeatures mask */ | |
| 1984 | #define WL_WNM_BSSTRANS 0x00000001 | |
| 1985 | #define WL_WNM_PROXYARP 0x00000002 | |
| 1986 | #define WL_WNM_MAXIDLE 0x00000004 | |
| 1987 | #define WL_WNM_TIMBC 0x00000008 | |
| 1988 | #define WL_WNM_TFS 0x00000010 | |
| 1989 | #define WL_WNM_SLEEP 0x00000020 | |
| 1990 | #define WL_WNM_DMS 0x00000040 | |
| 1991 | #define WL_WNM_FMS 0x00000080 | |
| 1992 | #define WL_WNM_NOTIF 0x00000100 | |
| 1993 | #define WL_WNM_WBTEXT 0x00000200 | |
| 1994 | #define WL_WNM_ESTM 0x00000400 | |
| 1995 | #define WL_WNM_MAX 0x00000800 | |
| 1996 | #ifdef WLWNM_BRCM | |
| 1997 | #define BRCM_WNM_FEATURE_SET\ | |
| 1998 | (WL_WNM_PROXYARP | \ | |
| 1999 | WL_WNM_SLEEP | \ | |
| 2000 | WL_WNM_FMS | \ | |
| 2001 | WL_WNM_TFS | \ | |
| 2002 | WL_WNM_TIMBC | \ | |
| 2003 | WL_WNM_BSSTRANS | \ | |
| 2004 | WL_WNM_DMS | \ | |
| 2005 | WL_WNM_NOTIF | \ | |
| 2006 | 0) | |
| 2007 | #endif /* WLWNM_BRCM */ | |
| 2008 | #ifndef ETHER_MAX_DATA | |
| 2009 | #define ETHER_MAX_DATA 1500 | |
| 2010 | #endif /* ETHER_MAX_DATA */ | |
| 2011 | ||
| 2012 | /* Different discovery modes for dpt */ | |
| 2013 | #define DPT_DISCOVERY_MANUAL 0x01 /* manual discovery mode */ | |
| 2014 | #define DPT_DISCOVERY_AUTO 0x02 /* auto discovery mode */ | |
| 2015 | #define DPT_DISCOVERY_SCAN 0x04 /* scan-based discovery mode */ | |
| 2016 | ||
| 2017 | /* different path selection values */ | |
| 2018 | #define DPT_PATHSEL_AUTO 0 /* auto mode for path selection */ | |
| 2019 | #define DPT_PATHSEL_DIRECT 1 /* always use direct DPT path */ | |
| 2020 | #define DPT_PATHSEL_APPATH 2 /* always use AP path */ | |
| 2021 | ||
| 2022 | /* different ops for deny list */ | |
| 2023 | #define DPT_DENY_LIST_ADD 1 /* add to dpt deny list */ | |
| 2024 | #define DPT_DENY_LIST_REMOVE 2 /* remove from dpt deny list */ | |
| 2025 | ||
| 2026 | /* different ops for manual end point */ | |
| 2027 | #define DPT_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */ | |
| 2028 | #define DPT_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */ | |
| 2029 | #define DPT_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */ | |
| 2030 | ||
| 2031 | /* flags to indicate DPT status */ | |
| 2032 | #define DPT_STATUS_ACTIVE 0x01 /* link active (though may be suspended) */ | |
| 2033 | #define DPT_STATUS_AES 0x02 /* link secured through AES encryption */ | |
| 2034 | #define DPT_STATUS_FAILED 0x04 /* DPT link failed */ | |
| 2035 | ||
| 2036 | #ifdef WLTDLS | |
| 2037 | /* different ops for manual end point */ | |
| 2038 | #define TDLS_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */ | |
| 2039 | #define TDLS_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */ | |
| 2040 | #define TDLS_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */ | |
| 2041 | #define TDLS_MANUAL_EP_PM 4 /* put dpt endpoint in PM mode */ | |
| 2042 | #define TDLS_MANUAL_EP_WAKE 5 /* wake up dpt endpoint from PM */ | |
| 2043 | #define TDLS_MANUAL_EP_DISCOVERY 6 /* discover if endpoint is TDLS capable */ | |
| 2044 | #define TDLS_MANUAL_EP_CHSW 7 /* channel switch */ | |
| 2045 | #define TDLS_MANUAL_EP_WFD_TPQ 8 /* WiFi-Display Tunneled Probe reQuest */ | |
| 2046 | ||
| 2047 | /* modes */ | |
| 2048 | #define TDLS_WFD_IE_TX 0 | |
| 2049 | #define TDLS_WFD_IE_RX 1 | |
| 2050 | #define TDLS_WFD_PROBE_IE_TX 2 | |
| 2051 | #define TDLS_WFD_PROBE_IE_RX 3 | |
| 2052 | #endif /* WLTDLS */ | |
| 2053 | ||
| 2054 | /* define for flag */ | |
| 2055 | #define TSPEC_PENDING 0 /* TSPEC pending */ | |
| 2056 | #define TSPEC_ACCEPTED 1 /* TSPEC accepted */ | |
| 2057 | #define TSPEC_REJECTED 2 /* TSPEC rejected */ | |
| 2058 | #define TSPEC_UNKNOWN 3 /* TSPEC unknown */ | |
| 2059 | #define TSPEC_STATUS_MASK 7 /* TSPEC status mask */ | |
| 2060 | ||
| 2061 | #ifdef BCMCCX | |
| 2062 | /* "wlan_reason" iovar interface */ | |
| 2063 | #define WL_WLAN_ASSOC_REASON_NORMAL_NETWORK 0 /* normal WLAN network setup */ | |
| 2064 | #define WL_WLAN_ASSOC_REASON_ROAM_FROM_CELLULAR_NETWORK 1 /* roam from Cellular network */ | |
| 2065 | #define WL_WLAN_ASSOC_REASON_ROAM_FROM_LAN 2 /* roam from LAN */ | |
| 2066 | #define WL_WLAN_ASSOC_REASON_MAX 2 /* largest value allowed */ | |
| 2067 | #endif /* BCMCCX */ | |
| 2068 | ||
| 2069 | /* Software feature flag defines used by wlfeatureflag */ | |
| 2070 | #ifdef WLAFTERBURNER | |
| 2071 | #define WL_SWFL_ABBFL 0x0001 /* Allow Afterburner on systems w/o hardware BFL */ | |
| 2072 | #define WL_SWFL_ABENCORE 0x0002 /* Allow AB on non-4318E chips */ | |
| 2073 | #endif /* WLAFTERBURNER */ | |
| 965f77c4 | 2074 | #define WL_SWFL_NOHWRADIO 0x0004 /* Disable HW Radio monitor (e.g., Cust Spec) */ |
| d2839953 RC |
2075 | #define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */ |
| 2076 | #define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */ | |
| 2077 | ||
| 2078 | #define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */ | |
| 2079 | ||
| 2080 | #define CSA_BROADCAST_ACTION_FRAME 0 /* csa broadcast action frame */ | |
| 2081 | #define CSA_UNICAST_ACTION_FRAME 1 /* csa unicast action frame */ | |
| 2082 | ||
| 2083 | /* Roaming trigger definitions for WLC_SET_ROAM_TRIGGER. | |
| 2084 | * | |
| 2085 | * (-100 < value < 0) value is used directly as a roaming trigger in dBm | |
| 2086 | * (0 <= value) value specifies a logical roaming trigger level from | |
| 2087 | * the list below | |
| 2088 | * | |
| 2089 | * WLC_GET_ROAM_TRIGGER always returns roaming trigger value in dBm, never | |
| 2090 | * the logical roam trigger value. | |
| 2091 | */ | |
| 2092 | #define WLC_ROAM_TRIGGER_DEFAULT 0 /* default roaming trigger */ | |
| 2093 | #define WLC_ROAM_TRIGGER_BANDWIDTH 1 /* optimize for bandwidth roaming trigger */ | |
| 2094 | #define WLC_ROAM_TRIGGER_DISTANCE 2 /* optimize for distance roaming trigger */ | |
| 2095 | #define WLC_ROAM_TRIGGER_AUTO 3 /* auto-detect environment */ | |
| 2096 | #define WLC_ROAM_TRIGGER_MAX_VALUE 3 /* max. valid value */ | |
| 2097 | ||
| 2098 | #define WLC_ROAM_NEVER_ROAM_TRIGGER (-100) /* Avoid Roaming by setting a large value */ | |
| 2099 | ||
| 2100 | /* Preferred Network Offload (PNO, formerly PFN) defines */ | |
| 2101 | #define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */ | |
| 2102 | ||
| 2103 | #define SORT_CRITERIA_BIT 0 | |
| 2104 | #define AUTO_NET_SWITCH_BIT 1 | |
| 2105 | #define ENABLE_BKGRD_SCAN_BIT 2 | |
| 2106 | #define IMMEDIATE_SCAN_BIT 3 | |
| 2107 | #define AUTO_CONNECT_BIT 4 | |
| 2108 | #define ENABLE_BD_SCAN_BIT 5 | |
| 2109 | #define ENABLE_ADAPTSCAN_BIT 6 | |
| 2110 | #define IMMEDIATE_EVENT_BIT 8 | |
| 2111 | #define SUPPRESS_SSID_BIT 9 | |
| 2112 | #define ENABLE_NET_OFFLOAD_BIT 10 | |
| 2113 | /* report found/lost events for SSID and BSSID networks seperately */ | |
| 2114 | #define REPORT_SEPERATELY_BIT 11 | |
| 2115 | #define BESTN_BSSID_ONLY_BIT 12 | |
| 2116 | ||
| 2117 | #define SORT_CRITERIA_MASK 0x0001 | |
| 2118 | #define AUTO_NET_SWITCH_MASK 0x0002 | |
| 2119 | #define ENABLE_BKGRD_SCAN_MASK 0x0004 | |
| 2120 | #define IMMEDIATE_SCAN_MASK 0x0008 | |
| 2121 | #define AUTO_CONNECT_MASK 0x0010 | |
| 2122 | ||
| 2123 | #define ENABLE_BD_SCAN_MASK 0x0020 | |
| 2124 | #define ENABLE_ADAPTSCAN_MASK 0x00c0 | |
| 2125 | #define IMMEDIATE_EVENT_MASK 0x0100 | |
| 2126 | #define SUPPRESS_SSID_MASK 0x0200 | |
| 2127 | #define ENABLE_NET_OFFLOAD_MASK 0x0400 | |
| 2128 | /* report found/lost events for SSID and BSSID networks seperately */ | |
| 2129 | #define REPORT_SEPERATELY_MASK 0x0800 | |
| 2130 | #define BESTN_BSSID_ONLY_MASK 0x1000 | |
| 2131 | ||
| 2132 | #define PFN_VERSION 2 | |
| 2133 | #ifdef PFN_SCANRESULT_2 | |
| 2134 | #define PFN_SCANRESULT_VERSION 2 | |
| 2135 | #else | |
| 2136 | #define PFN_SCANRESULT_VERSION 1 | |
| 2137 | #endif /* PFN_SCANRESULT_2 */ | |
| 2138 | #ifndef MAX_PFN_LIST_COUNT | |
| 2139 | #define MAX_PFN_LIST_COUNT 16 | |
| 2140 | #endif /* MAX_PFN_LIST_COUNT */ | |
| 2141 | ||
| 2142 | #define PFN_COMPLETE 1 | |
| 2143 | #define PFN_INCOMPLETE 0 | |
| 2144 | ||
| 2145 | #define DEFAULT_BESTN 2 | |
| 2146 | #define DEFAULT_MSCAN 0 | |
| 2147 | #define DEFAULT_REPEAT 10 | |
| 2148 | #define DEFAULT_EXP 2 | |
| 2149 | ||
| 2150 | #define PFN_PARTIAL_SCAN_BIT 0 | |
| 2151 | #define PFN_PARTIAL_SCAN_MASK 1 | |
| 2152 | ||
| 2153 | #define WL_PFN_SUPPRESSFOUND_MASK 0x08 | |
| 2154 | #define WL_PFN_SUPPRESSLOST_MASK 0x10 | |
| 2155 | #define WL_PFN_SSID_A_BAND_TRIG 0x20 | |
| 2156 | #define WL_PFN_SSID_BG_BAND_TRIG 0x40 | |
| 2157 | #define WL_PFN_SSID_IMPRECISE_MATCH 0x80 | |
| 2158 | #define WL_PFN_SSID_SAME_NETWORK 0x10000 | |
| 2159 | #define WL_PFN_SUPPRESS_AGING_MASK 0x20000 | |
| 2160 | #define WL_PFN_FLUSH_ALL_SSIDS 0x40000 | |
| 2161 | #define WL_PFN_RSSI_MASK 0xff00 | |
| 2162 | #define WL_PFN_RSSI_SHIFT 8 | |
| 2163 | ||
| 2164 | #define WL_PFN_REPORT_ALLNET 0 | |
| 2165 | #define WL_PFN_REPORT_SSIDNET 1 | |
| 2166 | #define WL_PFN_REPORT_BSSIDNET 2 | |
| 2167 | ||
| 2168 | #define WL_PFN_CFG_FLAGS_PROHIBITED 0x00000001 /* Accept and use prohibited channels */ | |
| 2169 | #define WL_PFN_CFG_FLAGS_HISTORY_OFF 0x00000002 /* Scan history suppressed */ | |
| 2170 | ||
| 2171 | #define WL_PFN_HIDDEN_BIT 2 | |
| 2172 | #define PNO_SCAN_MAX_FW 508*1000 /* max time scan time in msec */ | |
| 2173 | #define PNO_SCAN_MAX_FW_SEC PNO_SCAN_MAX_FW/1000 /* max time scan time in SEC */ | |
| 2174 | #define PNO_SCAN_MIN_FW_SEC 10 /* min time scan time in SEC */ | |
| 2175 | #define WL_PFN_HIDDEN_MASK 0x4 | |
| 2176 | #define MAX_SSID_WHITELIST_NUM 4 | |
| 2177 | #define MAX_BSSID_PREF_LIST_NUM 32 | |
| 2178 | #define MAX_BSSID_BLACKLIST_NUM 32 | |
| 2179 | ||
| 2180 | #ifndef BESTN_MAX | |
| 2181 | #define BESTN_MAX 10 | |
| 2182 | #endif // endif | |
| 2183 | ||
| 2184 | #ifndef MSCAN_MAX | |
| 2185 | #define MSCAN_MAX 32 | |
| 2186 | #endif // endif | |
| 2187 | ||
| 2188 | /* TCP Checksum Offload error injection for testing */ | |
| 2189 | #define TOE_ERRTEST_TX_CSUM 0x00000001 | |
| 2190 | #define TOE_ERRTEST_RX_CSUM 0x00000002 | |
| 2191 | #define TOE_ERRTEST_RX_CSUM2 0x00000004 | |
| 2192 | ||
| 2193 | /* ARP Offload feature flags for arp_ol iovar */ | |
| 965f77c4 RC |
2194 | #define ARP_OL_AGENT 0x00000001 |
| 2195 | #define ARP_OL_SNOOP 0x00000002 | |
| 2196 | #define ARP_OL_HOST_AUTO_REPLY 0x00000004 | |
| 2197 | #define ARP_OL_PEER_AUTO_REPLY 0x00000008 | |
| 2198 | #define ARP_OL_UPDATE_HOST_CACHE 0x00000010 | |
| d2839953 RC |
2199 | |
| 2200 | /* ARP Offload error injection */ | |
| 2201 | #define ARP_ERRTEST_REPLY_PEER 0x1 | |
| 2202 | #define ARP_ERRTEST_REPLY_HOST 0x2 | |
| 2203 | ||
| 2204 | #define ARP_MULTIHOMING_MAX 8 /* Maximum local host IP addresses */ | |
| 2205 | #if defined(WL_PKT_FLTR_EXT) && !defined(WL_PKT_FLTR_EXT_DISABLED) | |
| 2206 | #define ND_MULTIHOMING_MAX 32 /* Maximum local host IP addresses */ | |
| 2207 | #else | |
| 2208 | #define ND_MULTIHOMING_MAX 10 /* Maximum local host IP addresses */ | |
| 2209 | #endif /* WL_PKT_FLTR_EXT && !WL_PKT_FLTR_EXT_DISABLED */ | |
| 2210 | #define ND_REQUEST_MAX 5 /* Max set of offload params */ | |
| 2211 | /* AOAC wake event flag */ | |
| 2212 | #define WAKE_EVENT_NLO_DISCOVERY_BIT 1 | |
| 2213 | #define WAKE_EVENT_AP_ASSOCIATION_LOST_BIT 2 | |
| 2214 | #define WAKE_EVENT_GTK_HANDSHAKE_ERROR_BIT 4 | |
| 2215 | #define WAKE_EVENT_4WAY_HANDSHAKE_REQUEST_BIT 8 | |
| 2216 | #define WAKE_EVENT_NET_PACKET_BIT 0x10 | |
| 2217 | ||
| 2218 | #define MAX_NUM_WOL_PATTERN 22 /* LOGO requirements min 22 */ | |
| 2219 | ||
| 2220 | /* Packet filter operation mode */ | |
| 2221 | /* True: 1; False: 0 */ | |
| 2222 | #define PKT_FILTER_MODE_FORWARD_ON_MATCH 1 | |
| 2223 | /* Enable and disable pkt_filter as a whole */ | |
| 2224 | #define PKT_FILTER_MODE_DISABLE 2 | |
| 2225 | /* Cache first matched rx pkt(be queried by host later) */ | |
| 2226 | #define PKT_FILTER_MODE_PKT_CACHE_ON_MATCH 4 | |
| 2227 | /* If pkt_filter is enabled and no filter is set, don't forward anything */ | |
| 2228 | #define PKT_FILTER_MODE_PKT_FORWARD_OFF_DEFAULT 8 | |
| 2229 | ||
| 2230 | #ifdef DONGLEOVERLAYS | |
| 2231 | #define OVERLAY_IDX_MASK 0x000000ff | |
| 2232 | #define OVERLAY_IDX_SHIFT 0 | |
| 2233 | #define OVERLAY_FLAGS_MASK 0xffffff00 | |
| 2234 | #define OVERLAY_FLAGS_SHIFT 8 | |
| 2235 | /* overlay written to device memory immediately after loading the base image */ | |
| 2236 | #define OVERLAY_FLAG_POSTLOAD 0x100 | |
| 2237 | /* defer overlay download until the device responds w/WLC_E_OVL_DOWNLOAD event */ | |
| 2238 | #define OVERLAY_FLAG_DEFER_DL 0x200 | |
| 2239 | /* overlay downloaded prior to the host going to sleep */ | |
| 2240 | #define OVERLAY_FLAG_PRESLEEP 0x400 | |
| 2241 | #define OVERLAY_DOWNLOAD_CHUNKSIZE 1024 | |
| 2242 | #endif /* DONGLEOVERLAYS */ | |
| 2243 | ||
| 2244 | /* reuse two number in the sc/rc space */ | |
| 2245 | #define SMFS_CODE_MALFORMED 0xFFFE | |
| 2246 | #define SMFS_CODE_IGNORED 0xFFFD | |
| 2247 | ||
| 2248 | /* RFAWARE def */ | |
| 2249 | #define BCM_ACTION_RFAWARE 0x77 | |
| 2250 | #define BCM_ACTION_RFAWARE_DCS 0x01 | |
| 2251 | ||
| 2252 | /* DCS reason code define */ | |
| 2253 | #define BCM_DCS_IOVAR 0x1 | |
| 2254 | #define BCM_DCS_UNKNOWN 0xFF | |
| 2255 | ||
| 2256 | #ifdef PROP_TXSTATUS | |
| 2257 | /* Bit definitions for tlv iovar */ | |
| 2258 | /* | |
| 2259 | * enable RSSI signals: | |
| 2260 | * WLFC_CTL_TYPE_RSSI | |
| 2261 | */ | |
| 2262 | #define WLFC_FLAGS_RSSI_SIGNALS 0x0001 | |
| 2263 | ||
| 2264 | /* enable (if/mac_open, if/mac_close,, mac_add, mac_del) signals: | |
| 2265 | * | |
| 2266 | * WLFC_CTL_TYPE_MAC_OPEN | |
| 2267 | * WLFC_CTL_TYPE_MAC_CLOSE | |
| 2268 | * | |
| 2269 | * WLFC_CTL_TYPE_INTERFACE_OPEN | |
| 2270 | * WLFC_CTL_TYPE_INTERFACE_CLOSE | |
| 2271 | * | |
| 2272 | * WLFC_CTL_TYPE_MACDESC_ADD | |
| 2273 | * WLFC_CTL_TYPE_MACDESC_DEL | |
| 2274 | * | |
| 2275 | */ | |
| 2276 | #define WLFC_FLAGS_XONXOFF_SIGNALS 0x0002 | |
| 2277 | ||
| 2278 | /* enable (status, fifo_credit, mac_credit) signals | |
| 2279 | * WLFC_CTL_TYPE_MAC_REQUEST_CREDIT | |
| 2280 | * WLFC_CTL_TYPE_TXSTATUS | |
| 2281 | * WLFC_CTL_TYPE_FIFO_CREDITBACK | |
| 2282 | */ | |
| 2283 | #define WLFC_FLAGS_CREDIT_STATUS_SIGNALS 0x0004 | |
| 2284 | ||
| 2285 | #define WLFC_FLAGS_HOST_PROPTXSTATUS_ACTIVE 0x0008 | |
| 2286 | #define WLFC_FLAGS_PSQ_GENERATIONFSM_ENABLE 0x0010 | |
| 2287 | #define WLFC_FLAGS_PSQ_ZERO_BUFFER_ENABLE 0x0020 | |
| 2288 | #define WLFC_FLAGS_HOST_RXRERODER_ACTIVE 0x0040 | |
| 2289 | #define WLFC_FLAGS_PKT_STAMP_SIGNALS 0x0080 | |
| 2290 | ||
| 2291 | #endif /* PROP_TXSTATUS */ | |
| 2292 | ||
| 2293 | #define WL_TIMBC_STATUS_AP_UNKNOWN 255 /* AP status for internal use only */ | |
| 2294 | ||
| 2295 | #define WL_DFRTS_LOGIC_OFF 0 /* Feature is disabled */ | |
| 2296 | #define WL_DFRTS_LOGIC_OR 1 /* OR all non-zero threshold conditions */ | |
| 2297 | #define WL_DFRTS_LOGIC_AND 2 /* AND all non-zero threshold conditions */ | |
| 2298 | ||
| 2299 | /* Definitions for Reliable Multicast */ | |
| 2300 | #define WL_RELMCAST_MAX_CLIENT 32 | |
| 2301 | #define WL_RELMCAST_FLAG_INBLACKLIST 1 | |
| 2302 | #define WL_RELMCAST_FLAG_ACTIVEACKER 2 | |
| 2303 | #define WL_RELMCAST_FLAG_RELMCAST 4 | |
| 2304 | ||
| 2305 | /* structures for proximity detection device role */ | |
| 2306 | #define WL_PROXD_MODE_DISABLE 0 | |
| 2307 | #define WL_PROXD_MODE_NEUTRAL 1 | |
| 2308 | #define WL_PROXD_MODE_INITIATOR 2 | |
| 2309 | #define WL_PROXD_MODE_TARGET 3 | |
| 2310 | #define WL_PROXD_RANDOM_WAKEUP 0x8000 | |
| 2311 | ||
| 2312 | #ifdef NET_DETECT | |
| 2313 | #define NET_DETECT_MAX_WAKE_DATA_SIZE 2048 | |
| 2314 | #define NET_DETECT_MAX_PROFILES 16 | |
| 2315 | #define NET_DETECT_MAX_CHANNELS 50 | |
| 2316 | #endif /* NET_DETECT */ | |
| 2317 | ||
| 2318 | /* Bit masks for radio disabled status - returned by WL_GET_RADIO */ | |
| 2319 | #define WL_RADIO_SW_DISABLE (1<<0) | |
| 2320 | #define WL_RADIO_HW_DISABLE (1<<1) | |
| 2321 | #define WL_RADIO_MPC_DISABLE (1<<2) | |
| 2322 | #define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */ | |
| 2323 | #define WL_RADIO_PERCORE_DISABLE (1<<4) /* Radio diable per core for DVT */ | |
| 2324 | #define WL_RADIO_TSYNC_PWRSAVE_DISABLE (1<<5) /* Disable Radio in tsync mode for power saving */ | |
| 2325 | ||
| 2326 | #define WL_SPURAVOID_OFF 0 | |
| 2327 | #define WL_SPURAVOID_ON1 1 | |
| 2328 | #define WL_SPURAVOID_ON2 2 | |
| 2329 | ||
| 2330 | #define WL_4335_SPURAVOID_ON1 1 | |
| 2331 | #define WL_4335_SPURAVOID_ON2 2 | |
| 2332 | #define WL_4335_SPURAVOID_ON3 3 | |
| 2333 | #define WL_4335_SPURAVOID_ON4 4 | |
| 2334 | #define WL_4335_SPURAVOID_ON5 5 | |
| 2335 | #define WL_4335_SPURAVOID_ON6 6 | |
| 2336 | #define WL_4335_SPURAVOID_ON7 7 | |
| 2337 | #define WL_4335_SPURAVOID_ON8 8 | |
| 2338 | #define WL_4335_SPURAVOID_ON9 9 | |
| 2339 | ||
| 2340 | /* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ | |
| 2341 | #define WL_TXPWR_OVERRIDE (1U<<31) | |
| 2342 | #define WL_TXPWR_2G (1U<<30) | |
| 2343 | #define WL_TXPWR_5G (1U<<29) | |
| 2344 | #define WL_TXPWR_NEG (1U<<28) | |
| 2345 | ||
| 2346 | #define WL_TXPWR_MASK (~(0x7<<29)) | |
| 2347 | #define WL_TXPWR_CORE_MAX (3) | |
| 2348 | #define WL_TXPWR_CORE0_MASK (0x000000FF) | |
| 2349 | #define WL_TXPWR_CORE0_SHIFT (0) | |
| 2350 | #define WL_TXPWR_CORE1_MASK (0x0000FF00) | |
| 2351 | #define WL_TXPWR_CORE1_SHIFT (8) | |
| 2352 | #define WL_TXPWR_CORE2_MASK (0x00FF0000) | |
| 2353 | #define WL_TXPWR_CORE2_SHIFT (16) | |
| 2354 | ||
| 2355 | /* phy types (returned by WLC_GET_PHYTPE) */ | |
| 2356 | #define WLC_PHY_TYPE_A 0 | |
| 2357 | #define WLC_PHY_TYPE_B 1 | |
| 2358 | #define WLC_PHY_TYPE_G 2 | |
| 2359 | #define WLC_PHY_TYPE_N 4 | |
| 2360 | #define WLC_PHY_TYPE_LP 5 | |
| 2361 | #define WLC_PHY_TYPE_SSN 6 | |
| 2362 | #define WLC_PHY_TYPE_HT 7 | |
| 2363 | #define WLC_PHY_TYPE_LCN 8 | |
| 2364 | #define WLC_PHY_TYPE_LCN40 10 | |
| 2365 | #define WLC_PHY_TYPE_AC 11 | |
| 2366 | #define WLC_PHY_TYPE_LCN20 12 | |
| 2367 | #define WLC_PHY_TYPE_NULL 0xf | |
| 2368 | ||
| 2369 | /* Values for PM */ | |
| 2370 | #define PM_OFF 0 | |
| 2371 | #define PM_MAX 1 | |
| 2372 | #define PM_FAST 2 | |
| 2373 | #define PM_FORCE_OFF 3 /* use this bit to force PM off even bt is active */ | |
| 2374 | ||
| 2375 | #define WL_WME_CNT_VERSION 1 /* current version of wl_wme_cnt_t */ | |
| 2376 | ||
| 2377 | /* fbt_cap: FBT assoc / reassoc modes. */ | |
| 2378 | #define WLC_FBT_CAP_DRV_4WAY_AND_REASSOC 1 /* Driver 4-way handshake & reassoc (WLFBT). */ | |
| 2379 | ||
| 2380 | /* monitor_promisc_level bits */ | |
| 2381 | #define WL_MONPROMISC_PROMISC 0x0001 | |
| 2382 | #define WL_MONPROMISC_CTRL 0x0002 | |
| 2383 | #define WL_MONPROMISC_FCS 0x0004 | |
| 2384 | ||
| 2385 | /* TCP Checksum Offload defines */ | |
| 2386 | #define TOE_TX_CSUM_OL 0x00000001 | |
| 2387 | #define TOE_RX_CSUM_OL 0x00000002 | |
| 2388 | ||
| 2389 | /* Wi-Fi Display Services (WFDS) */ | |
| 2390 | #define WL_P2P_SOCIAL_CHANNELS_MAX WL_NUMCHANNELS | |
| 2391 | #define MAX_WFDS_SEEK_SVC 4 /* Max # of wfds services to seek */ | |
| 2392 | #define MAX_WFDS_ADVERT_SVC 4 /* Max # of wfds services to advertise */ | |
| 2393 | #define MAX_WFDS_SVC_NAME_LEN 200 /* maximum service_name length */ | |
| 2394 | #define MAX_WFDS_ADV_SVC_INFO_LEN 65000 /* maximum adv service_info length */ | |
| 2395 | #define P2P_WFDS_HASH_LEN 6 /* Length of a WFDS service hash */ | |
| 2396 | #define MAX_WFDS_SEEK_SVC_INFO_LEN 255 /* maximum seek service_info req length */ | |
| 2397 | #define MAX_WFDS_SEEK_SVC_NAME_LEN 200 /* maximum service_name length */ | |
| 2398 | ||
| 2399 | /* ap_isolate bitmaps */ | |
| 2400 | #define AP_ISOLATE_DISABLED 0x0 | |
| 2401 | #define AP_ISOLATE_SENDUP_ALL 0x01 | |
| 2402 | #define AP_ISOLATE_SENDUP_MCAST 0x02 | |
| 2403 | ||
| 2404 | /* Type values for the wl_pwrstats_t data field */ | |
| 2405 | #define WL_PWRSTATS_TYPE_PHY 0 /**< struct wl_pwr_phy_stats */ | |
| 2406 | #define WL_PWRSTATS_TYPE_SCAN 1 /**< struct wl_pwr_scan_stats */ | |
| 2407 | #define WL_PWRSTATS_TYPE_USB_HSIC 2 /**< struct wl_pwr_usb_hsic_stats */ | |
| 2408 | #define WL_PWRSTATS_TYPE_PM_AWAKE1 3 /**< struct wl_pwr_pm_awake_stats_v1 */ | |
| 2409 | #define WL_PWRSTATS_TYPE_CONNECTION 4 /* struct wl_pwr_connect_stats; assoc and key-exch time */ | |
| 2410 | #define WL_PWRSTATS_TYPE_PCIE 6 /**< struct wl_pwr_pcie_stats */ | |
| 2411 | #define WL_PWRSTATS_TYPE_PM_AWAKE2 7 /**< struct wl_pwr_pm_awake_stats_v2 */ | |
| 2412 | #define WL_PWRSTATS_TYPE_SDIO 8 /* struct wl_pwr_sdio_stats */ | |
| 2413 | #define WL_PWRSTATS_TYPE_MIMO_PS_METRICS 9 /* struct wl_mimo_meas_metrics_t */ | |
| 2414 | #define WL_PWRSTATS_TYPE_SLICE_INDEX 10 /* slice index for which this report is meant for */ | |
| 2415 | #define WL_PWRSTATS_TYPE_TSYNC 11 /**< struct wl_pwr_tsync_stats */ | |
| 2416 | #define WL_PWRSTATS_TYPE_OPS_STATS 12 /* struct wl_pwr_ops_stats_t */ | |
| 2417 | #define WL_PWRSTATS_TYPE_BCNTRIM_STATS 13 /* struct wl_pwr_bcntrim_stats_t */ | |
| 2418 | #define WL_PWRSTATS_TYPE_SLICE_INDEX_BAND_INFO 14 /* wl_pwr_slice_index_band_t */ | |
| 2419 | #define WL_PWRSTATS_TYPE_PSBW_STATS 15 /* struct wl_pwr_psbw_stats_t */ | |
| 2420 | ||
| 2421 | /* IOV AWD DATA */ | |
| 2422 | #define AWD_DATA_JOIN_INFO 0 | |
| 2423 | #define AWD_DATA_VERSION_V1 1 | |
| 2424 | ||
| 2425 | /* IOV ETD DATA */ | |
| 2426 | #define ETD_DATA_JOIN_INFO 0 | |
| 2427 | #define ETD_DATA_VERSION_V1 1 | |
| 2428 | ||
| 965f77c4 RC |
2429 | /* CTMODE DBG */ |
| 2430 | /* input param: [31:16] => MPDU_THRESHOLD | |
| 2431 | * [15:03] => RESERVED | |
| 2432 | * [02] => enable UFP | |
| 2433 | * [01] => enable UFC | |
| 2434 | * [00] => enalbe CTMODE | |
| 2435 | */ | |
| 2436 | #define CTMODE_DBG_CTMODE_EN (0x1u) | |
| 2437 | #define CTMODE_DBG_UFC_EN (0x2u) | |
| 2438 | #define CTMODE_DBG_UFP_EN (0x4u) | |
| 2439 | #define CTMODE_DBG_MPDU_THRESHOLD_SHIFT (7u) | |
| 2440 | #define CTMODE_DBG_MPDU_THRESHOLD_MASK ((0x1FFu) << CTMODE_DBG_MPDU_THRESHOLD_SHIFT) | |
| 2441 | #define CTMODE_DBG_BYTES_THRESHOLD_SHIFT (16u) | |
| 2442 | #define CTMODE_DBG_BYTES_THRESHOLD_MASK ((0xFFFu) << CTMODE_DBG_BYTES_THRESHOLD_SHIFT) | |
| 2443 | ||
| 2444 | /* ====== SC use case configs ========= */ | |
| 2445 | /* SC user/use case request */ | |
| 2446 | #define WL_SC_REQ_SCAN 0u /* user scan */ | |
| 2447 | #define WL_SC_REQ_CNX 1u /* associated idle */ | |
| 2448 | #define WL_SC_REQ_NAN 2u /* NAN synchronization and discovery offload */ | |
| 2449 | ||
| 2450 | /* === Per use case configuration === */ | |
| 2451 | /* scan cfgs */ | |
| 2452 | #define SC_SCAN_CFG_PASSIVE_MASK 0x01u /* Enable passive scan on sc */ | |
| 2453 | #define SC_SCAN_CFG_PASSIVE_SHIFT 0u | |
| 2454 | #define SC_SCAN_CFG_LP_SCAN_MASK 0x02u /* Enable low prio scan on sc */ | |
| 2455 | #define SC_SCAN_CFG_LP_SCAN_SHIFT 1u | |
| 2456 | #define SC_SCAN_CFG_REG_SCAN_MASK 0x04u /* Enable split scan using sc */ | |
| 2457 | #define SC_SCAN_CFG_REG_SCAN_SHIFT 2u | |
| 2458 | #define SC_SCAN_CFG_FULL_SCAN_MASK 0x08u /* Enable full scan on sc */ | |
| 2459 | #define SC_SCAN_CFG_FULL_SCAN_SHIFT 3u | |
| 2460 | /* Add get and set macros for each of the configs? */ | |
| 2461 | ||
| 2462 | /* === Place holder for cnx and nan cfgs === */ | |
| d2839953 | 2463 | #endif /* wlioctl_defs_h */ |