ALSA: cmi8330: revert comments about AD1848 back

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / sound / isa / cmi8330.c

diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index 3ee0269e5bd08376fa47bf94731459b9ac4e0d03..d510c76c537ff4252e58a046dce864630deafbc8 100644 (file)
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -35,7 +35,7 @@
  *
  *  This card has two mixers and two PCM devices.  I've cheesed it such
  *  that recording and playback can be done through the same device.
- *  The driver "magically" routes the capturing to the CMI8330 codec,
+ *  The driver "magically" routes the capturing to the AD1848 codec,
  *  and playback to the SB16 codec.  This allows for full-duplex mode
  *  to some extent.
  *  The utilities in alsa-utils are aware of both devices, so passing
@@ -345,7 +345,7 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard,
 
        err = pnp_activate_dev(pdev);
        if (err < 0) {
-               snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n");
+               snd_printk(KERN_ERR "CMI8330/C3D (AD1848) PnP configure failure\n");
                return -EBUSY;
        }
        wssport[dev] = pnp_port_start(pdev, 0);
@@ -527,11 +527,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
                             wssdma[dev], -1,
                             WSS_HW_DETECT, 0, &acard->wss);
        if (err < 0) {
-               snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n");
+               snd_printk(KERN_ERR PFX "(AD1848) device busy??\n");
                return err;
        }
        if (acard->wss->hardware != WSS_HW_CMI8330) {
-               snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n");
+               snd_printk(KERN_ERR PFX "(AD1848) not found during probe\n");
                return -ENODEV;
        }