vfs: define struct filename and have getname() return it
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / cris / arch-v10 / kernel / process.c
CommitLineData
10f9f9c8 1/*
1da177e4
LT
2 * linux/arch/cris/kernel/process.c
3 *
4 * Copyright (C) 1995 Linus Torvalds
5 * Copyright (C) 2000-2002 Axis Communications AB
6 *
7 * Authors: Bjorn Wesen (bjornw@axis.com)
8 * Mikael Starvik (starvik@axis.com)
9 *
10 * This file handles the architecture-dependent parts of process handling..
11 */
12
1da177e4 13#include <linux/sched.h>
5a0e3ad6 14#include <linux/slab.h>
1da177e4
LT
15#include <linux/err.h>
16#include <linux/fs.h>
556dcee7 17#include <arch/svinto.h>
1da177e4 18#include <linux/init.h>
b1a154db 19#include <arch/system.h>
1da177e4
LT
20
21#ifdef CONFIG_ETRAX_GPIO
22void etrax_gpio_wake_up_check(void); /* drivers/gpio.c */
23#endif
24
25/*
26 * We use this if we don't have any better
27 * idle routine..
28 */
29void default_idle(void)
30{
31#ifdef CONFIG_ETRAX_GPIO
32 etrax_gpio_wake_up_check();
33#endif
34}
35
36/*
37 * Free current thread data structures etc..
38 */
39
40void exit_thread(void)
41{
42 /* Nothing needs to be done. */
43}
44
45/* if the watchdog is enabled, we can simply disable interrupts and go
46 * into an eternal loop, and the watchdog will reset the CPU after 0.1s
47 * if on the other hand the watchdog wasn't enabled, we just enable it and wait
48 */
49
50void hard_reset_now (void)
51{
52 /*
53 * Don't declare this variable elsewhere. We don't want any other
54 * code to know about it than the watchdog handler in entry.S and
55 * this code, implementing hard reset through the watchdog.
56 */
57#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
58 extern int cause_of_death;
59#endif
60
61 printk("*** HARD RESET ***\n");
62 local_irq_disable();
63
64#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
65 cause_of_death = 0xbedead;
66#else
49b4ff33 67 /* Since we dont plan to keep on resetting the watchdog,
1da177e4
LT
68 the key can be arbitrary hence three */
69 *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) |
70 IO_STATE(R_WATCHDOG, enable, start);
71#endif
72
73 while(1) /* waiting for RETRIBUTION! */ ;
74}
75
76/*
77 * Return saved PC of a blocked thread.
78 */
79unsigned long thread_saved_pc(struct task_struct *t)
80{
95ca0dc6 81 return task_pt_regs(t)->irp;
1da177e4
LT
82}
83
84static void kernel_thread_helper(void* dummy, int (*fn)(void *), void * arg)
85{
86 fn(arg);
87 do_exit(-1); /* Should never be called, return bad exit value */
88}
89
90/*
91 * Create a kernel thread
92 */
93int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
94{
95 struct pt_regs regs;
96
97 memset(&regs, 0, sizeof(regs));
98
99 /* Don't use r10 since that is set to 0 in copy_thread */
100 regs.r11 = (unsigned long)fn;
101 regs.r12 = (unsigned long)arg;
102 regs.irp = (unsigned long)kernel_thread_helper;
7cf32cad 103 regs.dccr = 1 << I_DCCR_BITNR;
1da177e4
LT
104
105 /* Ok, create the new process.. */
106 return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
107}
108
109/* setup the child's kernel stack with a pt_regs and switch_stack on it.
110 * it will be un-nested during _resume and _ret_from_sys_call when the
111 * new thread is scheduled.
112 *
113 * also setup the thread switching structure which is used to keep
114 * thread-specific data during _resumes.
115 *
116 */
117asmlinkage void ret_from_fork(void);
118
6f2c55b8 119int copy_thread(unsigned long clone_flags, unsigned long usp,
1da177e4
LT
120 unsigned long unused,
121 struct task_struct *p, struct pt_regs *regs)
122{
123 struct pt_regs * childregs;
124 struct switch_stack *swstack;
125
126 /* put the pt_regs structure at the end of the new kernel stack page and fix it up
127 * remember that the task_struct doubles as the kernel stack for the task
128 */
129
95ca0dc6 130 childregs = task_pt_regs(p);
1da177e4
LT
131
132 *childregs = *regs; /* struct copy of pt_regs */
133
134 p->set_child_tid = p->clear_child_tid = NULL;
135
136 childregs->r10 = 0; /* child returns 0 after a fork/clone */
137
138 /* put the switch stack right below the pt_regs */
139
140 swstack = ((struct switch_stack *)childregs) - 1;
141
142 swstack->r9 = 0; /* parameter to ret_from_sys_call, 0 == dont restart the syscall */
143
144 /* we want to return into ret_from_sys_call after the _resume */
145
146 swstack->return_ip = (unsigned long) ret_from_fork; /* Will call ret_from_sys_call */
147
148 /* fix the user-mode stackpointer */
149
150 p->thread.usp = usp;
151
152 /* and the kernel-mode one */
153
154 p->thread.ksp = (unsigned long) swstack;
155
156#ifdef DEBUG
157 printk("copy_thread: new regs at 0x%p, as shown below:\n", childregs);
158 show_registers(childregs);
159#endif
160
161 return 0;
162}
163
164/*
165 * Be aware of the "magic" 7th argument in the four system-calls below.
166 * They need the latest stackframe, which is put as the 7th argument by
167 * entry.S. The previous arguments are dummies or actually used, but need
168 * to be defined to reach the 7th argument.
169 *
170 * N.B.: Another method to get the stackframe is to use current_regs(). But
171 * it returns the latest stack-frame stacked when going from _user mode_ and
172 * some of these (at least sys_clone) are called from kernel-mode sometimes
173 * (for example during kernel_thread, above) and thus cannot use it. Thus,
174 * to be sure not to get any surprises, we use the method for the other calls
175 * as well.
176 */
177
178asmlinkage int sys_fork(long r10, long r11, long r12, long r13, long mof, long srp,
179 struct pt_regs *regs)
180{
181 return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
182}
183
184/* if newusp is 0, we just grab the old usp */
185/* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */
186asmlinkage int sys_clone(unsigned long newusp, unsigned long flags,
187 int* parent_tid, int* child_tid, long mof, long srp,
188 struct pt_regs *regs)
189{
190 if (!newusp)
191 newusp = rdusp();
192 return do_fork(flags, newusp, regs, 0, parent_tid, child_tid);
193}
194
195/* vfork is a system call in i386 because of register-pressure - maybe
196 * we can remove it and handle it in libc but we put it here until then.
197 */
198
199asmlinkage int sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,
200 struct pt_regs *regs)
201{
202 return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);
203}
204
205/*
206 * sys_execve() executes a new program.
207 */
d7627467
DH
208asmlinkage int sys_execve(const char *fname,
209 const char *const *argv,
210 const char *const *envp,
1da177e4
LT
211 long r13, long mof, long srp,
212 struct pt_regs *regs)
213{
214 int error;
91a27b2a 215 struct filename *filename;
1da177e4
LT
216
217 filename = getname(fname);
218 error = PTR_ERR(filename);
219
220 if (IS_ERR(filename))
221 goto out;
91a27b2a 222 error = do_execve(filename->name, argv, envp, regs);
1da177e4
LT
223 putname(filename);
224 out:
225 return error;
226}
227
228unsigned long get_wchan(struct task_struct *p)
229{
230#if 0
231 /* YURGH. TODO. */
232
233 unsigned long ebp, esp, eip;
234 unsigned long stack_page;
235 int count = 0;
236 if (!p || p == current || p->state == TASK_RUNNING)
237 return 0;
238 stack_page = (unsigned long)p;
239 esp = p->thread.esp;
240 if (!stack_page || esp < stack_page || esp > 8188+stack_page)
241 return 0;
242 /* include/asm-i386/system.h:switch_to() pushes ebp last. */
243 ebp = *(unsigned long *) esp;
244 do {
245 if (ebp < stack_page || ebp > 8184+stack_page)
246 return 0;
247 eip = *(unsigned long *) (ebp+4);
248 if (!in_sched_functions(eip))
249 return eip;
250 ebp = *(unsigned long *) ebp;
251 } while (count++ < 16);
252#endif
253 return 0;
254}
255#undef last_sched
256#undef first_sched
257
258void show_regs(struct pt_regs * regs)
259{
260 unsigned long usp = rdusp();
261 printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
262 regs->irp, regs->srp, regs->dccr, usp, regs->mof );
263 printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
264 regs->r0, regs->r1, regs->r2, regs->r3);
265 printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
266 regs->r4, regs->r5, regs->r6, regs->r7);
267 printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
268 regs->r8, regs->r9, regs->r10, regs->r11);
269 printk("r12: %08lx r13: %08lx oR10: %08lx\n",
270 regs->r12, regs->r13, regs->orig_r10);
271}
272